EPC WORK FOR UMM SHAIF LONG TERM DEVELOPMENT

PHASE-1 (US-LTD-1) PROJECT

Document Review/Comment Sheet

NPCC Transmittal No: 548-2288429-A0100 ADNOC Offshore Trl ref No: _________

Dated Received : 15.03.2023 Date Reviewed: 18.03.2023

Rev Document Approval Approval code **

Document No. Document Title Class Class *

AD-26-G-47011-P023-001 Cross sectional Drawing for HV Cables 1 2 B Approved with comments

*Approval Class:
1: Requires COMPANY review and approval to allow CONTRACTOR to proceed”
2: CONTRACTOR shall incorporate comments received from COMPANY within the Contract review period”
3: Documents issued for information, CONTRACTOR may proceed without COMPANY comments or approval:
**Approval Codes:
1: Approved without comment, 2: Approved with comments 3: Reviewed with Comments, 4: Information only,
5: Rejected
Page 1 of 4
 EPC WORK FOR UMM SHAIF LONG TERM DEVELOPMENT
PHASE-1 (US-LTD-1) PROJECT
Document Review/Comment Sheet

Review Code (MUST BE SELECTED): x 2 = Approved with comments

(proceed with work, incorporate comments and resubmit)
1 = Approved
4 = For Information 5= Rejected
3 = Reviewed with comments (correct & resubmit) (Accepted for information only) (Document must be resubmitted once comments are incorporated and then
contents meets the requirements of Agreement)

*Approval Class:
1: Requires COMPANY review and approval to allow CONTRACTOR to proceed”
2: CONTRACTOR shall incorporate comments received from COMPANY within the Contract review period”
3: Documents issued for information, CONTRACTOR may proceed without COMPANY comments or approval:
**Approval Codes:
1: Approved without comment, 2: Approved with comments 3: Reviewed with Comments, 4: Information only,
5: Rejected
Page 2 of 4
 EPC WORK FOR UMM SHAIF LONG TERM DEVELOPMENT
PHASE-1 (US-LTD-1) PROJECT
Document Review/Comment Sheet

COMMENTS – Rev.1
Document No. AD-26-G-47011-P023-001 Cross sectional Drawing for HV Cables

VENDOR
Srl. Reference NPCC/ADNOC/ COMMENTS VENDOR RESPONSE NPCC/ADNOC/ COMMENTS
RESPONSE
Page no.4/ 1C x630 Add High Conductivity (TYP) in the
1 Noted & Incorporated
sqmm Drawing description of conductor
Normally requirement of
binder tapes comes in picture
Page no.4/ 1C x630 Comment on Note-Vendor to explain
2 during manufacturing. So
sqmm Drawing the places where this not is applicable.
binder tape/tapes shall be
provided wherever required
Page no.5/ 3C x185 Add High Conductivity (TYP) in the
3 Noted & Incorporated
sqmm Drawing description of conductor
Normally requirement of
binder tapes comes in picture
Page no.5/ 3C x185 Comment on Note-Vendor to explain
4 during manufacturing. So
sqmm Drawing the places where this not is applicable.
binder tape/tapes shall be
provided wherever required
Page no.5/ 3C x185 Vendor to include the details for the
5 Noted & Incorporated
sqmm Drawing fillers.

*Approval Class:
1: Requires COMPANY review and approval to allow CONTRACTOR to proceed”
2: CONTRACTOR shall incorporate comments received from COMPANY within the Contract review period”
3: Documents issued for information, CONTRACTOR may proceed without COMPANY comments or approval:
**Approval Codes:
1: Approved without comment, 2: Approved with comments 3: Reviewed with Comments, 4: Information only,
5: Rejected
Page 3 of 4
 EPC WORK FOR UMM SHAIF LONG TERM DEVELOPMENT
PHASE-1 (US-LTD-1) PROJECT
Document Review/Comment Sheet

Document No. AD-26-G-47011-P023-001 Cross sectional Drawing for HV Cables

VENDOR
Srl. Reference NPCC/ADNOC/ COMMENTS VENDOR RESPONSE NPCC/ADNOC/ COMMENTS
RESPONSE
Page no.6/ 3C x 95 Add High Conductivity (TYP) in the
6 Noted & Incorporated
sqmm Drawing description of conductor
Normally requirement of
binder tapes comes in picture
Page no.6/ 3C x 95 Comment on Note-Vendor to explain
7 during manufacturing. So
sqmm Drawing the places where this not is applicable.
binder tape/tapes shall be
provided wherever required
Page no.6/ 3C x 95 Vendor to include the details for the
8 Noted & Incorporated
sqmm Drawing fillers.

Title Name Signature Date

18.03.2022
Sr. Engineer Design Abhinav Saxena

*Approval Class:
1: Requires COMPANY review and approval to allow CONTRACTOR to proceed”
2: CONTRACTOR shall incorporate comments received from COMPANY within the Contract review period”
3: Documents issued for information, CONTRACTOR may proceed without COMPANY comments or approval:
**Approval Codes:
1: Approved without comment, 2: Approved with comments 3: Reviewed with Comments, 4: Information only,
5: Rejected
Page 4 of 4
ADNOC Classification: Public

ADNOC Offshore Document No. AD-26-G-47011-P023-001 Class

Contractor Document No. 2035-64950AC-P023-001 2
Contract No. 4700012980 Budget Ref. E1372
Project Ind. Area Section Sub Section Number Revision Volume
AD 26 G VDB 47011 2 1 of 6

EPC WORK FOR UMM SHAIF LONG TERM

DEVELOPMENT PLAN
PHASE-1 (US LTDP-1) PROJECT

NPCC Purchase Order No : 2035-2022/64950-AC

Item Description : HV Cables
Equipment Tag No. :
Vendor Name : KEI INDUSTRIES LIMITED
Vendor Document No. : KEI/EXP-92674/DWG
Document Title : CROSS SECTIONAL DRAWING FOR HV CABLES

2 18/03/2023 Issued for Review AB MV AS

1 02/03/2023 Issued for Review AB MV AS
Prepared Checked Approved
Rev Date Description
By By By
ADNOC Classification: Public

EPC Work for Umm Shaif Long Term Development Plan

Phase-1 (US LTDP-1) Project
CONTRACT No: 4700012980
COMPANY PROJECT NO. CONTRACTOR PROJECT NO.
E1372 2035
CROSS SECTIONAL DRAWING FOR HV CABLES
COMPANY DOC. NO.: AD-26-G-47011-P023-001
Rev. 2
CONTRACTOR DOC. NO.: 2035-64950AC-P023-001 Page 2 of 6

REVISION CONTROL SHEET

Rev Rev.
Date Details of Revision
No Shts.

1 02/03/2023 1 Issued for Review

2 18/03/2023 1 Issued for Review

Page 2 of 6
 INDEX SHEET

SL. NO. Material Code Voltage Grade Cable Size in sqmm Page Ref. No.

1 N200140386 6.35/11 (12) KV 1C x 630 4 of 6

2 N200140387 6.35/11 (12) KV 3C x 185 5 of 6

3 N200140388 3.8/6.6 (7.2) KV 3C x 95 6 of 6

CROSS SECTIONAL DRAWING

 FLAME RETARDANT SINGLE CORE ARMOURED CABLE
Tinned CU/SC/EPR/SC/CTS/SW4/TPBWB/SW4

6.35/11 (12)KV, 1C x 630 Sqmm

Note :- Suitable binder tape/tapes shall be provided wherever required.

KEI Industries Ltd, India

Drawing No. - KEI/DWG/1C Sqmm Not to Scale

KEI/EXP-92674/DWG 64950
 FLAME RETARDANT MULTI CORE ARMOURED CABLE
Tinned CU/SC/EPR/SC/CTS/SW4/GSWB/SW4
6.35/11 (12)KV, 3C x 185 Sqmm

8
9

Note :- Suitable binder tape/tapes shall be provided wherever required.

KEI Industries Ltd, India

Drawing No. - KEI/DWG/3C Sqmm Not to Scale

KEI/EXP-92674/DWG 64950
 FLAME RETARDANT MULTI CORE ARMOURED CABLE
Tinned CU/SC/EPR/SC/CTS/SW4/GSWB/SW4

3.8/6.6 (7.2)KV, 3C x 95 Sqmm

Note :- Suitable binder tape/tapes shall be provided wherever required.

KEI Industries Ltd, India

Drawing No. - KEI/DWG/3C Sqmm Not to Scale

KEI/EXP-92674/DWG 64950