ITEM

DESCRIPTION UNIT Quantity

ELECTRICAL INSTALLATION
Supply and Install:-
All distribution boards , breakers , switches, accessories etc should be genuine Legrand , ABB, Siemens or
approved equivalents complying with IEC standards. Distribution boards should be made of sheet metal and have
separate neutral and ground busbars/phase bars.

1 Flash mounted distribution board with bus-bars rating of 40A/1ph and with all its accessories consisting of :-
1 pc M.C.C.B. of 32A/1ph Main
3 pc M.C.B of 10/1ph
5 pcs M.C.B of 16/1ph
and with 20% reserve space. No 1.00
and wired to relevant IEC standard, and consisting of:-
2 power cable of type SIEMENS NYY 0.6/1 KV or equivalent
3x6 Sq.mm
Note; depending on distance of energy meter from DB m
3 grounding wire under each main and sub-main distribution board including connection to earthing conductor of
1x4 Sq.mm
Note; depending on distance of grounding point from DB m
4 Light points
Surface mounted light points fed through PVC insulated conductories of 3*2.5mm2 inside pvc conduits of 16
mm diameter, under surface and or on surface clippped atintervalof not more than 1 m; includingjunction boxes Nº 172.00
with coversand insulating screw capconnectories,complete and consistng
5 SWITCH FITTING
10A/1ph flush mounted with appropriate cover plate, frame and box.
a. One way single circuit switch Nº 23.00
b. One way double circuit switch Nº 8.00
c. Two-way single circuit switch Nº 16.00
d. One way three circuit switch Nº 8.00

Data from Site 1

ITEM
DESCRIPTION UNIT Quantity
6
SOCKET OUTLETS POINTS
Socket outlet flush mounted,16A, 1ph, schuko type in medium
duty rigid thermoplastic conduit of diameter 16mm
fed by PVC insulated copper conductor of 3x2.5sq.mm. Nº #REF!
10
SOCKET OUTLETS POINTS
a. Socket outlet flush mounted,16A, 1ph, schuko type in medium duty rigid thermoplastic conduit of diameter 16mm
fed by PVC insulated copper conductor of 3x2.5sq.mm. Nº 27.00
b. Socket outlet flush mounted,25A, 1ph, schuko type in medium duty rigid thermoplastic conduit of diameter 19mm
fed by PVC insulated copper conductor of 3x4sq.mm. Nº 2.00
c. Socket outlet flush mounted,32A, 3ph, schuko type in medium duty rigid thermoplastic conduit of diameter 25mm
fed by PVC insulated copper conductor of 5x4sq.mm. Nº 2.00
11 SOCKET FITTING
a. Flush mounted,16A, 1ph, schuko typ single socket Nº 27.00
b. Flush mounted,25A, 1ph, schuko typ socket Nº 2.00
c. Flush mounted,32A, 3ph, schuko typ socket Nº 2.00
9 LIGHT FITTING
A. Type 1 fitting with all acessosories
Mounting - chancieler
Lamp type- LED
Optics/diffuser - PRISMATIC series of acrylic(PMMA) white
translucent with prismatic pattern of powder coated steel frame
Lamp wattage-48 watts
Lumen out put-4800 lm
Luminare material-Steel sheet
Mercury free, instant start with flicker free
LED driver-220V/50Hz with minimum life of 25000hrs Nº 3.00
B. Type 2 fitting with all acessosories
Circular Recessed mounted
Lamp type- SMD LED
Optics/diffuser - PRISMATIC series of acrylic(PMMA) white
translucent with prismatic pattern of powder coated steel frame
Lamp wattage-20 watts
Lumen out put-1800 lm
Mercury free, instant start with flicker free
LED driver-220V/50Hz with minimum life of 25000hrs Nº 78.00
Diameter;-200 mm
C. Type 3 fitting with all acessosories
Mounting - Surface light fitting
Lamp type- LED
Optics/diffuser -White translucent with opal patern of Powder
coated ,High quality aluminum main body for heat radiation
Lamp wattage-36 watts
Lumen out put-3600 lm
Mercury free and long-lasting with flicker free
LED driver-220V/50Hz with minimum life of 25,000hrs Nº 12.00
D. Type 4 fitting with all acessosories
Mounting - Surface light fitting
Lamp type- LED
Optics/diffuser -White translucent with opal patern of Powder
coated ,High quality aluminum main body for heat radiation
Lamp wattage-36 watts
Lumen out put-3600 lm
Mercury free and long-lasting with flicker free
LED driver-220V/50Hz with minimum life of 25,000hrs Nº 40.00
E. Type 5 fitting with all acessosories
Mounting - Surface light fitting
Lamp type- LED
Optics/diffuser -White translucent with opal patern of Powder
coated ,High quality aluminum main body for heat radiation
Lamp wattage- 9 watts
Lumen out put-640 lm
Mercury free and long-lasting with flicker free
LED driver-220V/50Hz with minimum life of 25,000hrs Nº 3.00
F. Type 6 fitting with all acessosories
Mounting - suspended
Lamp type- LED
Optics/diffuser -White translucent with opal patern of Powder
coated ,High quality aluminum main body for heat radiation
Lamp wattage-12 watts
Lumen out put-852 lm
Mercury free and long-lasting with flicker free
LED driver-220V/50Hz with minimum life of 25,000hrs Nº 20.00
G. BASO 60 IP54 opal trim fitting with all acessosories

Mounting - Surface
Lamp type- LED
Optics/diffuser -White translucent with high performance opal patern of powder
coated ,High quality aluminum main body for heat radiation
Lamp wattage-20 watts
Lumen out put-2460 lm
Mercury free and long-lasting with flicker free
LED driver-220V/50Hz with minimum life of 25,000hrs Nº 16.00
Cutout diemenssion
length 1209 mm
width 66 mm
weight:- not greater than 3 kg
H. Flexible strip light
Lamp type-LED
Optics/diffuser -White translucent with opal patern of Powder
coated ,High quality aluminum main body for heat radiation
Lamp wattage-10 watts/meter
Lumen out put-1000 lm/meter
Mercury free and long-lasting with flicker free
LED driver-220V/50Hz with minimum life of 25,000hrs m 290.00
10
Earthing system materials supplied, instailed, connected and tested, complete, including conductors, busbar,
straps, test points with complete accesories as specified on drawings
Nº 1.00
11 Telephone system

Data from Site 2

ITEM
DESCRIPTION UNIT Quantity

Telephone sytem according to manufacturer and utility supplier's requirements, supplied, installed, connected
color coded including tags and tested, complete, all as specified and / or as shown on the drawings.
a. Telepone point fed through a CAT 6a UTP cable inside PVC conduit of 16 mm diameter. No. 1.00
b. Telephone socket including RJ 11 connector legrand, Mozaic type complete with clip on support frame. No. 1.00
12 Data System
a. Data poins fed through a CAT 6a UTP cable inside PVC conduit of 16 mm diameter. No. 2.00
b. Data socket including RJ 45 connector legrand, Mozaic type complete with clip on support frame. No. 2.00
13 TV System
TV poin fed through a COAXIAL RG-6 cable inside PVC conduit of 19 mm diameter. No. 1.00

Data from Site 3

ITEM
DESCRIPTION UNIT Quantity

Data from Site 4

ITEM DESCRIPTION UNIT Quantity Remark

UPS SYSTEMS

120,40,15KVA- MODULAR UPS

APC as specified bellow or approved equivalent
Supply and fix
32 a. Out put power factor not less than 0.99
Efficiency not less than 95%
Out put power capacity not less than 120KVA
Minimum back up time with 100% load not less than
15minutes With 125% load not less than 10minutes
Maximum noise level at full load @1meter distance 64 DBA
Battery charge with current limiting
Battery deep discharge protection
Diagnostic and settings with PC ability
Software's compatible for most computer platforms
Direct network connection with SNMP support
LCD alphanumeric display panel providing battery, load,
voltage, power and status information in detail to user
Separate RS232 and RS485 communication ports
Remote Monitoring Panel
4 years system warranty
10 years spare parts warranty

APC or Approved equivalent, 380V+/-5%, MODULAR UPS

of modules with 20KVA each (6x20KVA) total 120KVA
with 15-min full load back-up time, rack managed sealed lead-acid
rechargeable battery with 4years minimum life time ,on-line double
conversion integrated automatic By-pass, manual maintenance By-
technology, automatic battery test, power factor 0.99, efficiency
pass,95% or greater, surge protector audio visual display
of load, battery and UPS status, input harmonic filter,
maintenance by-pass switch, all complete including
cabling. No 1.00

32 a. Out put power factor not less than 0.99

Efficiency not less than 95%
Out put power capacity not less than 20KVA
Minimum back up time with 100% load not less than
15minutes With 125% load not less than 10minutes
Maximum noise level at full load @1meter distance 64 DBA
Battery charge with current limiting
Battery deep discharge protection
Diagnostic and settings with PC ability
Software's compatible for most computer platforms
Direct network connection with SNMP support
LCD alphanumeric display panel providing battery, load,
voltage, power and status information in detail to user
Separate RS232 and RS485 communication ports
Remote Monitoring Panel
4 years system warranty
10 years spare parts warranty

APC or Approved equivalent, 380V+/-5%, MODULAR UPS

of modules with 20KVA each (6x20KVA) total 20KVA
with 15-min full load back-up time, rack managed sealed lead-acid
rechargeable battery with 4years minimum life time ,on-line double
conversion integrated automatic By-pass, manual maintenance By-
technology, automatic battery test, power factor 0.99, efficiency
pass,95% or greater, surge protector audio visual display
of load, battery and UPS status, input harmonic filter,
maintenance by-pass switch, all complete including
cabling. No 6.00
(Technical Specifications
Standards
ISO 7465:2001,EN-81,BS ,ANSI,JIS,ISO 9001,
ES 3158:2006,ES 3159:2006 , latest editions of BS/EN
or ES and others quality certificate for design, manfucturing
installtion and commissioning lifts and quality certificate for design,
manfucturing,commissioning lifts parts.
-Electromagnetic compatibility
- Electromagnetic immunity
-Electrical Safety
- Electonic equipment for use in power facilities:
- Standards for lift installtion in market places
Rubber tyred car door hangers for sound level isolation.

IT SECTION
46
IP RELATED, CCTV, PAVA, AV, NURSE-CALL, IP-TV SYSTEMS( FOR LOW VOLTAGE SECTION)
Supply and Fix
Main Telephone Terminal Blocks(Distribution frames)
with corresponding box and frames

Floor stand 500 pairs telephone terminal

blocks(telephone distribution frame) or Punch down
blocks with plastic cover of similar color to the
adjacent wall support structure complete accessories Nº

Floor Box

- Floor box shall be fixed neatly in contact with the

horizontal surface of the floor/raised floors with all necessary

Data from Site 5

ITEM DESCRIPTION UNIT Quantity Remark
or connectors with IP 66 enclousures and mechanically strong
Height/depth of the floor box should not be greater than 50mm
All outlets should be of CAT6a RJ-45

Approved type dual service Slim modular round/non metalic/

Metallic steel Floor Box with complete
consisting of 2pcs RJ45/8 contact 4 pairs CAT6a
data socket outlet and 1pc pc of 3x2.5 sq.mm wire with twin schuko
type power 220V receptacles. With covers and frames
Supplied with re usable concrete cap, conduit hub
plugs and reducers.with two hubs for low voltage Nº
and two hubs for power. Reducers to provide reduction
of PVC conduit.Markings inside the box Universal cover and sub-plate

47

TELE/DATA SYSTEM

ALL DATA AND TELEPHONE SYSTEMS SHOULD

COMPLY WITH THE FOLLOWING CHARACTERS

-All data systems cables and equipments shall conform with

ANS/TIA-942/ISO/IEC IS 11801/IEEE or equivalent.

-Use all cablings of UTP CAT6a/class Ea/10Gbit/sec/100m/

23AWG/500MHz/RJ-45/10GB BAZE-T.
-Use proper horizontal/vertical cable managers in the rack.
-Use proper size of patch panels(24/48port) of CAT6a RJ-45
48 wall outlets.
-Data and Telephone system shall have 3rd party
certificates with as built and shop drawings.
-All horizontal cabling shall be of pure copper UTP type.

Extra over Data/telephone socket out lets

with detachable frames & corresponding
box 3rd party certified
Nº
Twin modular type of CAT6a (2xRJ45) 8contact of Data and telephone
socket out lets

Wireless Access Point.

Supply,Installation and Configration or approved

50 equivalent
3rd party certified

Wireless access point should be fast dual band 802.11AC

concurrent operation between 2.4GHz & 5GHz frequncey
ranges,factory tuned external antennas
provides superior signal and far reaching WIFI coverage,
Advanced secuirty and felexibilty wireless Configration
access point to point /point to multi point wireless
bridge mode , support IPV6 for improved perfomance,
1.5A power adapter power consumption 8.1W,
physical interfaces-four 10/100/1000Base-T
Eternet (RJ-45) portswith auto uplink,with maxmum
throughput of 300Mbps (2.4GHz) & 867Mbps (5GHz) Nº
,external antenna 3dbi and with all the complete
accessories.

Data and Telephone Cables patch panel with metallic Rack

a. Patch panels with size of 72ports/3U of CAT6a RJ45 8contact 4 pairs

for data and 24pair TPP on wall mounted metallic
of 15U pivoting cabinet swing 19" steel enclosure with
transparent and lockable door, with corresponding power
supply unit of 8pcs scuko type socket out lets and plug
and standard pivoting cabinet with rack for wall mounting ,
knock-out holes for cable entrance and conduit connection,
ventilation ports , standard prefabricated patch cords (1meter) ,
8port fiber termination box with sleeve/pigtails and connectors Nº
and 25% reserve space for access switches
, including screen label holder , complete

b. Patch panels with size of 48ports/2U of CAT6a RJ45 8contact 4 pairs

for data and 24pairs TPP on wall mounted metallic of 15U pivoting cabinet
swing 19" steel enclosure with transparent and lockable door, with
corresponding power supply unit of 8pcs scuko type socket out lets and plug
and standard pivoting cabinet with rack for wall mounting ,
knock-out holes for cable entrance and conduit connection,
ventilation ports , standard prefabricated patch cords (1meter) ,
8port fiber termination box with sleeve/pigtails and connectors Nº
and 25% reserve space for access switches
, including screen label holder , complete

c. Patch panels with size of 24ports/1U of CAT6a RJ45 8contact 4 pairs

for data and 12pairs TPP on wall mounted metallic
of 12U pivoting cabinet swing 19" steel enclosure with
transparent and lockable door, with corresponding power
supply unit of 8pcs scuko type socket out lets and plug
and standard pivoting cabinet with rack for wall mounting ,

Data from Site 6

ITEM DESCRIPTION UNIT Quantity Remark
knock-out holes for cable entrance and conduit connection,
ventilation ports , standard prefabricated patch cords (1meter) ,
8port fiber termination box with sleeve/pigtails and connectors Nº
and 25% reserve space for access switches
, including screen label holder , complete

d. Optical fiber Patch panel of 72ports/3U for data 96 pairs TPP for tele
on wall metalic rack of 18U pivoting cabinet swing 19"
steel enclosure with transparent and lockable door, with
51 corresponding power supply unit of 8pcs scuko type socket out lets
and plug and standard pivoting cabinet ,knock-out holes for cable
entrance and conduit connection, ventilation ports , standard
prefabrecated patchcords (1meter) and 25% reserve space for
Distribution and core switches which are specified below, Nº
including screen lable holder , complete connection and
all the necessary accessories..

e. Optical fiber Main Patch panel (Server room) 72ports/3U on a

floor standing metalic rack of 42U pivoting cabinet swing 19"
steel enclosure with transparent and lockable door, with
corresponding power supply unit of 8pcs scuko type socket out lets
and plug and standard pivoting cabinet ,knock-out holes for cable
entrance and conduit connection, ventilation ports , standard
prefabrecated patchcords (1meter) and 25% reserve space for
Distribution and core switches which are specified below, Nº
including screen lable holder , complete connection and
all the necessary accessories..

Fire alarm and voice evacuation/ public address and

CCTV Systems

Fire alarmsystems

Fire alarm control pannel

a. Supply and install fire alarm control panel with the

following specification
-Digital addressable
-Input power 220VAC, 50 Hz
-Capable of networked connection
-Programmable internal hard ware and output circuits
-Programmable soft ware zones/microprocessor based
-Accessories for out put connection for telephone circuit
sealed battery capable of supply to all equipments for
at least 72Hr and shall sound the alarm for 30min.
-PA system interface port with card
-Trouble acknowledge and alarm silence switch
-Visual and audiable trouble alarm by zone
-Manual acknowledge function
-LCD display (80 characters)
-Program keypad
-LED indicators
Short circuit isolator modules.
-Intelligent input/output modules
8 loop with loop capacity of >200 intelligent devices
-20 or more configurable zones
-Dirty detector indicator and false signal identifier
All the necessary accessories and facilities (functions) as Nº
per the BSNE 54 standards to make the system
complete

Detectors

-Digital addressable smoke/heat detectors

-Suitable for educational/adminstration building
-Minimum of 45sq.m coverage area

Sounders with Visual indicators and LCD repeater panels

-The sounder and visual indicator shall be integrated unts

- Digital Addressable and loop powered
-Suitable for semi surface mounting
-With selectable tones, intermittent or continuous
-Suitable for direct connection with the loop of detectors

Sounders and Visual indicators,LCD display repeater panel

54
d. Loop powered sounders and fire alarm indicators with the, Nº
strobed intensity with all the necessary accessories to
make the system complete.

e. Fire alarm LCD display Anunciator (repeater)with Nº

local sound muter,scrolling alarm buttons with all the
necessary accessories to make the system complete.(to each block)

Digital Manual call (non breakable and resettable glass)

Nº
f. Manual fire alarm break glass with all the necessary

Data from Site 7

ITEM DESCRIPTION UNIT Quantity Remark
accessories for surface mounting

Intelligent short circuit isolator module of loop powered

Nº
g. Isolates faulty part of the loop in the event of short circuit
and automatically resetable with LED indicator

INTEGRATTED VOICE EVACUATION AND

PUBLIC ADDRESS SYSTEMS WITH SHOPDRAWINGS

3rd party certified voice evacuation and public address systems

equipment,, installed,connected, tested and commissioned
including cables, complete all as specified (or equivalent)
and/or shown on drawings,data cables,subswiches,
programming soft wares, conduits and all
necessary accessories , complete as manufactured
and/or shown on drawings with complete shop drawings
and .analysis made before manufacturing instillation
and conducting/installtion

a. DIGITAL NETWORK PA AND VOICE ALARM

CONTROLLER
Should control fully PA, voice alarming and background
music systems Support zone selection,remote microphones,
monitoring ,integrattingall PA and voice evacuation equipments
Built in EVAC,ALERT TEST voice message,recorder message
inputs audio source inputs,CD/AMP3 player,AM/FM tuner
- emergency microphone input on the front panel
-Individual BGM volume control for each zone
-Standard and
Integrated emergencybackground
1 independent control input and outputs
music player, support timing, fixed, curved, specify playback modes, support MP3 and
WMA audio formats. No.
5 inch HD color touch graphical man-machine operation interface.
One button for emergency alarm.

b. VOICE ALARM AMPLIFIER

with built in 1200W amplifier and 12 independent power zones output
Network EVAC inputs and BGM inputs,local emergency mic input
Automatic detection of speakers loop path
4-channel input interfaces,4 programmable relay signal No.
output port With all basic functional features
with wired volume controllers of 12pcs for each zones
No.
c.120W AMPLIFIER Balanced line input and outputs for the speakers
of each channels Built in fans for automatic start
No.
d. VOICE RECORDER
Features with recording audio input; to receive audio recording and store into the SD card No.

e.Fire man remote microphone (VA-6000RM or approved equivalent) No.

f. Remote Paging Microphone (VA-6000RT or approved equivalent)

g. Microphone Extension Unit (VA-6000EM or approved equivalent) No.

h. 6W ceiling recessed/surface speaker with fixing accessories No.

i. 6W surface mounted speaker with fixing accessories

Ls
j. Softwares, documentation, instruction of
owner's staff, power supplies,test and commissioning inclusive

k.All other power,signal and control cable and cabling Ls

CCTV SYSTEM

IP based POE type Closed circuit television equipment,

equipment supplied, installed,connected, tested and
commissioned including cables, complete all
as specified (or equivalent) with shop drawings.

a. LED color 48" monitor with pixel pitch of 1280x1024, HDMI

VGA/AV,USB ports and connectors,control consule , keyboard, Nº
mouse and remote controller on standard wooden table and
drawer including other necessary accessories(3x3)

b. Approved type POE Indoor color autodome fixed day and

night IR(20m) RJ45 camera with the following minimum requirments :-
* IR of 20meter LED, compression format of MPEG-4/MJPEG
* Power over Ethernet is mandatory
*Lens with varifocal auto Iris 3.7-12mm lens
*Image sensor 1/3"CCD,4MP Nº
With mounting brackets including other necessary accessories
to make the system functional.

c. 12 ports Gigabit layer-3 POE switch 10Gbps uplinks,

100/1000Mbps SFP slots,16 shared 10/100/1000Mbps
Ethernet ports,4 extra 1/10G SFP + Uplink slots
and 2/20G QSFP+slots,managable switch, operating
temperature 0-50degree centigrade ,208Gbps Switch Nº
fabric, power consumption of 50W(max), throughput
of 154Mbps @ 64Bytes.

d. Layer2 Ethernet Switch with 12-Ports 10 Gbps ports,

Data from Site 8

ITEM DESCRIPTION UNIT Quantity Remark
10/100/1000base-Tx RJ 45 ports,100/1000Base-Fx SFP
ports, provided SSH protocol enhanced
network security, supports Devices binding
security function ,Supports SNMP v1/v2c & RMON & 802.1Q
VLAN network management, support ACL for security , No.
Multiple notifications warn of unexpected events,IEEE 802.3AZ
Energy efficient Ethernet Compliant

e. Approved type 24 channels Network Video Recorder(NVR)

with the following minimum requirments :-
* CPU of 500MHz, with memory of RAM of 1GB
*Expandable upto Hard Disk capacity of 10TB
* Manage upto 24 network cameras
* Compression format of MPEG-4/MJPEG
* Connectors with USB/RS-485/RS-232/DI/DO connectors/RJ45
*Power supply of 12V DC with adaptor Nº
including other necessary accessories to make the system
56 functional.
g. Licenced softwares for IP camera and switch(NVR)with complete Nº
instruction preloded to camera,test and commissioning servers and
switch all according to the requirment of manfactures all complete

h.Approved type server with intel coreI3 3,4GHz

RAM of 500GB with interface,20 terabyte HDD
with power supply and adaptor with mouse including all
softwares 8 Port KVM Switch, 17" TFT Screen, Rack
Mountable Kit Preloaded with all the necessary licensed No.
softwares will be done with no extra charge of all with 27U rack
licensed softwares will be done with no extra charge

IP -TV and IP-nurse call SYSTEMS with shop drawings

IP -TV SYSTEMS with shop drawings for 350 users

IP -TV HEADEND for about 270 users upgrade up to 350

Arantia modular IPH2010 professional headend with 2pcs 1.8m satellite
dishes and 1pc local antenna with quandro LNBs complete or
approved equivalent Nº
With all the features and components of the specified
headend device , encoder 8 CVBS MPEG2/H.264 IP

Set-Top-Box Chronos IPTV HD or approved equivalent with

a.Power Supply for Set-Top-Box and screens

Wall Mounting Kit for Set-Top-Box
IPTV Set-Top-Box universal Remote Controller with IR extender Nº
Set-Top-Box Compact Keyboard with all necessary
accessories to make the systems complete and functional

b.12 ports Gigabit layer-3 POE switch 10Gbps uplinks,

100/1000Mbps SFP slots,16 shared 10/100/1000Mbps
Ethernet ports,4 extra 1/10G SFP + Uplink slots
and 2/20G QSFP+slots,managable switch, operating
temperature 0-50degree centigrade ,208Gbps Switch No.
fabric, power consumption of 50W(max), throughput
of 154Mbps @ 64Bytes.

c. Layer2 Ethernet Switch with 12-Ports 10 Gbps ports,

10/100/1000base-Tx RJ 45 ports,100/1000Base-Fx SFP
ports, provided SSH protocol enhanced
network security, supports Devices binding
security function ,Supports SNMP v1/v2c & RMON & 802.1Q
VLAN network management, support ACL for security , No.
Multiple notifications warn of unexpected events,IEEE 802.3AZ
Energy efficient Ethernet Compliant
Nº
57 e. RJ45 outlets type , Category 6a with 8 contacts
complete with all necessary accessories
Nº
f.32" LED screen for IP TV with wall mounting brackets
power supplies and all accessories

58 g. Licenced soft wares for about 50 users IP TV headend and switch

IPTV Display Software for PC/screens with complete instruction Nº
preloaded servers and switch all according to the requirment of
manfactures all complete

h. softwares, documentation, instruction/trainings of owner's staff Nº

and hard copy and softcopy manuals maintenance schedules
with as built drawings

i. All other accessories and items,cables requirements not Nº

covered by the above items and required to complete
the specified works

Server

Dell power edge R930 or equivalaent Dual Intel® Xeon® No

E7-4850 v4, Windows Server 2016 Standard Edition,
128GB Memory, 2.4TB SAS Hard Drive and a 3 Years Warranty

NURSE CALL SYSTEM

Data from Site 9

ITEM DESCRIPTION UNIT Quantity Remark
IP based Nurse call equipment, equipment
supplied, installed,connected, tested and
commissioned including coaxial cables, complete all
as specified (or equivalent) and/or shown on drawings.
60
System shall be capable of integrating to:
Most brands of in-building wireless telephone systems
Most brands of pocket paging systems
Hospital data gathering and reporting software
Wireless call cords, CCTV switching controls,
and door access controls
Patient-to-staff assignments, wandering patient alarm
systems, bed exit and/or fall prevention alarm systems,
and patient equipment calls
Marquee display panels, PC monitors, and large screen
monitors such as Flat Panel LCD or Plasma displays
Select Electronic Medical Record (EMR) system(s)

Each nurse call UL 1069 Listed network shall connect to

the hospital's network via a software bridge that
isolates the hospital network from the nurse call
network to maintain UL requirements.

IP-Type single bed ICU,RECOVERY Terminal unit with (POE type)

a. Fully assembled aluminium adaptable DLP trunking size of
65x195mm with two compartiments of 85 each with accessories of
covers,partitions,end cap,angles junction droped down from ceilings
vertically to bed head and runs horizontally to the length of bed
with nurse call systems minimum features of :-
1. loudspeaker,call push button,2pcs of presence push buttons,(Bed Wall Unit)
2. 20way connector to connect with power supply
3. RJ-45 connector and advanced options
4.2pcs 1ph/16A single Socket outlet

IP-technology incorporating with VO-IP standards

Wired and hands free phone communications with PA systems
LCD information display of current state of the room and alarms
Viewing and responding of the alarms from other rooms
16 in/out connections to connect with other room elements
Braille key boards for visual impaired residents
and consists of:-

1pc Bed side call button unit with handsets No.

1st and 2nd presence button unit with cancellation and status
1pc bathroom call and cancellation button unit with pull cord

Note: the PWU in each bed should be intergrated with Mechincal systems.

Health care monitors about 50 users maximum

with minimum features of:-

b. Should handles all high and low priority calls from the hospitals
Record of alarms and response times
Display of alarms in map format and report genaration
Connection with hospital management systems
Should support operating systems like windows XP,VISTA..
Web browser and flash player and adobe reader… No.
Monitoring of information with DATE,PLACE,PATIENT,..
with standard color of priorities

c. 24 ports Gigabit layer-3 POE switch 10Gbps uplinks,

100/1000Mbps SFP slots,16 shared 10/100/1000Mbps
Ethernet ports,4 extra 1/10G SFP + Uplink slots
and 2/20G QSFP+slots,managable switch, operating
temperature 0-50degree centigrade ,208Gbps Switch No.
fabric, power consumption of 50W(max), throughput
of 154Mbps @ 64Bytes.

d. Layer2 Ethernet Switch with 24-Ports 10 Gbps ports,

10/100/1000base-Tx RJ 45 ports,100/1000Base-Fx SFP
ports, provided SSH protocol enhanced
network security, supports Devices binding
security function ,Supports SNMP v1/v2c & RMON & 802.1Q
VLAN network management, support ACL for security , No.
Multiple notifications warn of unexpected events,IEEE 802.3AZ
Energy efficient Ethernet Compliant
No.
e. Approved type IP Workstaion compters with key boards and
controle consules/table for monitors with necessary accessories

f. Approved type server with intel coreI3 3,4GHz

RAM of 500GB with interface,10 terabyte HDD
with power supply and adaptor with mouse including all
softwares 8 Port KVM Switch, 17" TFT Screen, Rack No.
Mountable Kit Preloaded with all the necessary licensed
softwares will be done with no extra charge of all with 27U rack
No.
g.Central 24VDC-5A three wire Power supply systems for the
room terminal units with necessary accessories

h. IP Nurse call room terminal units points fed by cable

i.Room Controller mounted in each room with

Data from Site 10

ITEM DESCRIPTION UNIT Quantity Remark
Door unit -Presence / cancellation button No.

j. LED Corridor /Door Lights

62 k.Licenced soft wares for IP nurse call systems,monitors and switch No

with complete instruction preloded to the systems,servers and
switch all according to the requirment of manfactures all complete

l. All other accessories and items,cables requirements not Nº

covered by the above items and required to complete
the specified works

SOUND AND PROJECTION SYSTEM FOR HALL

3rd party certified certified sound and projection

system equipment, supplied, installed, connected, tested and commissioned
including coaxial cables, complete all as specified (or equivalent) and/or
shown on drawings, data cables,subswiches,programming soft wares,
conduits and all necessary accessories , complete as manufactured and/or
shown on drawings with complete shop drawings and .
analysis made before manufacturing instillation
and conducting/installation

SOUND SYSTEMS SHALL BE AS SPECIFIED OR APPROVED EQUIVALENT BASED ON EASE ANLYSIS

a.Frequency
Wall mounted Speaker with mounting
response:40Hz-20KHz, Rated power: 250W, Sensitivity:100dB/W/M Nº
brackets
Max and complete systems
SPL(rated/peak):127dB/133dB, Coverage angle:(H)90° (V)80°, Woofer: 5" woofer ×1 No
b. Coloumn speaker to be mounted on the wall (>20W 3pcs of SR-FID speaker system + 1 pc SR-LIB sub woofer system)
with brackets and all necessary mounting accessories.
b. Professional Amplifier Nº
Output power (20-20KHz/THD≤1%) stereo/parallel 8Ω × 2: 250W × 2
Maximum power consumption: 4500W,frequency response (@1W Power):20-20KHz/±1dB

c.
MICMixer
and (LINE
9TS-20PD-4 or approved equivalent)
joint input:
8channels
Linear input: 4-channel stereo single-plug interface
USB interface: 2 USB ports for stereo recording/playback/system
Screen: 7-inch HD IPS touch screen, resolution: 1024×600 Nº
DSP processor: 32-bit floating point
Audio processor, Compressor, Equalizer

63 d. Audio Processor (TS-P880 or approved equivalent)

Full-featured matrix mixing, flexible and simple signal routing operations
Provide the USB interface for multimedia storage to play audios or store recording
8-channel programmable
Input channel: GPIO
Preamplifier, control
signal interface
generator, extender, compressor, equalizer, Nº
AM auto-mixing function, AFC adaptive feedback cancellation, AEC echo cancellation,
Output channel: parametric equalizer, delayer, frequency divider, high-lower pass filter Nº

e. Wireless Microphone with transmitter and recievers all with accessories

f. 42U 19" equipment rack with glass door, removable side Nº

panel, vent panels with ventilation equipment's including fan and thermostat, heavy duty, castor wheels and all
necessary accessories.

g. All other accessories and items, cables and functional requirements not Ls
covered by the above items and required to complete
the specified works

PROJECTION AND PRESENTATION SYSTEMS

a. IP based Projector full HD of 5000 Ansi Lumen,

Resolution 1280x1024 (native) 1600x1200 (max) or equivalent
and with RJ45,HDMI,DVD,RGB,Video,serial,USB ports
& remote outlets and approved with Vertically adjustable
ceiling mount bar and all other necessary accessories. Nº
With HDMI extension cable to connect at stage for the staff meeting rooms
(PE523X or approved equivalent) Nº

b. 4mt x 3mt electrically operated Motorized projection screen of top roller type Nº

c. HDMI floor box with extension data ,audio ,power cable to connect at stage.

d. Projector power points fed through cable PVC

sheathed, PVC insulated cable of rating 0.6/1KV
or approved equivalent and of 3x2.5mm2.
with thermoplastic conduit of minimum diameter
inside PVC conduits of 20mm diameter including Nº
junction boxes with covers and insulating caps
all complete..(TO BE MOUNTED ON CEILING)

e. Twin IP projector points fed by cable 2x category 6a UTP

data cable inside medium duty PVC conduit of 20mm. Nº
Price to include CAT 6a UTP RJ45 termination,3meter
patch cord and all necessary accessories. BIRR

Data from Site 11

 BILL
DESCRIPTION UNIT QTY. RATE AMOUNT REMARK
ITEM
SITE WORKS

F. ELECTRICAL SITE WORK AND RELATED

INSTALLATION

1 PVC PIPES

a. Supply and lay PVC pipe of diameter 150 mm for power lines. Price
m 1,300.00
includes excavation & backfill.

b. Ditto PVC pipe of diameter 110 mm. m 860.00

c. Ditto but PVC pipe of diameter 50 mm. m 460.00

d. Supply and lay PVC pipe of diameter 110 mm for telephone lines.
m 800.00
Price includes excavation & backfill.

e. Ditto as above but PVC pipe of diameter 200 mm. m 240.00

Supply and install PVC insulated and PVC sheathed underground

2
power cable of type SIEMENS NYY 0.6/1 KV or approved equivalent

a.3X300/150 Sq.mm m 900.00

b. 3X70/35 Sq.mm m 1,300.00

c. 3X50/25 Sq.mm m 500.00

d. 3X25/16 Sq.mm m 350.00

e. 5X16 Sq.mm m 100.00

f. 5X2.5 Sq.mm m 2,000.00

g. 2X2.5 Sq.mm m 250.00

h. 3X2.5 Sq.mm m 250.00

Floor standing main distribution board MDB with lockable door, bus-
3
bar rating of 3000A/3ph and with all its accessories consisting of :-

1 pc m.c.c.b. of 2500A/3ph
1 pc m.c.c.b. of 1250A/3ph
1 pc m.c.c.b. of 800A/3ph
2 pcs m.c.c.b. of 200A/3ph
3 pcs m.c.c.b. of 125A/3ph
1 pc m.c.c.b. of 100A/3ph
1 pc m.c.c.b. of 63A/3ph
1 pc m.c.b. of 50A/3ph
1 pc m.c.b. of 25A/3ph
1 pc voltmeter with phase selector switch
3 pcs ammeters with current transformers
3 pcs pilot lamps and all according to drawing.
and with 20% reserve space. No 2.00

4 a. Compound lighting type FUMAGALLI G.50 B.50 with 1xSON-T

70W high pressure sodium vapor lamp.(OR EQUIVALENT LED) No 52.00

b. Flood lighting type PHILIPS SNF 100 SON-T 150W 230V II SP

with 1xSON-T150W high pressure sodium vapor lamp.(OR No 12.00
EQUIVALENT LED)

c. Gate lighting type MASSIVE 17515/87/10 with 2xE-27 23W

compact fluorescent lamps.(OR EQUIVALENT LED) No 1.00

5 Galvanized and silver paint painted finely finished circular steel pole of
diameter 100mm in 1.5m length, 75mm in 1.5m length, and 60mm in No 52.00
0.2m and flange mounted as shown on drawing.

6 Construct 200x200x500mms mass concrete foundation in C-20 for

supporting compound and walk-way light poles. No 52.00

7 Copper earthing rod of 2.2m long & 16mm diameter type FURSE or
approved equivalent driven down to the ground under each main and No 4.00
sub-main distribution boards.

Data from Site 12 Site Work

 BILL
DESCRIPTION UNIT QTY. RATE AMOUNT REMARK
ITEM

8 Supply and install grounding wire under each main and sub-main
distribution board including connection to earthing conductor.

9 a. 2X185 Sq.mm m 3.00

b. 1X120 Sq.mm m 10.00

c. 2X150 Sq.mm m 10.00

d. 1X16 Sq.mm m 3.00

e. 1X25 Sq.mm m 3.00

f. 1X35 Sq.mm m 3.00

Construct manholes with brick wall 250mm thick on mass concrete bed
of 100mm, with inside walls to be plastered in two coats of cement
10 mortar, with reinforced concrete slab cover of 60mm thick , steel bar
handle and having internal dimensions of :-
a) 60x60x70cms. No 27.00
b) 100x100x70cms. No 8.00
c) 120x120x70cms. No 8.00
d) 150x150x70cms. No 37.00
e) 200x200x70cms. No 2.00
f) 100x100x60cms. (FOR TELE LINE) No 15.00

COMPACT NETSTATION TRANSFORMER

Supply and install Outdoor type compact net station 1600 KVA, 15/0.2
KV rated, with three compartments for MV, transformer and LV and
11 fabricated from sheet steel body having roof made of double layers
with foam in between including roof mounted lifting eyes and as
detailed below:-
a) Medium Voltage Compartment
a1) Incoming side consisting of:-
- 1pc Three phase load break switch
- 1 pc earthing switch mechanically interlocked with the main switch
- 1pc earth fault indicator NO DESIGN
- 3 pcs single pole potential transformer
- 1pc voltmeter with selector switch
- 1pc KWh Meter ( To be supplied by EEPCo)
- 1pc KVA Meter ( To be supplied by EEPCo)
a2) Outgoing side consisting of:-
- 1pc Three phase load break switch
- 3 pcs HRC fuses
- 3 pcs current transformers

b) Transformer Compartment
- 1600 KVA, 15/0.2 KV oil immersed naturally air cooled type
(ONAN), off load tap changer ± 5% in step of 2.5% Dyn5, Dyn11,
short circuit impedance 6% and with standard indication and protection
accessories.

c) Low Voltage Compartment

- 1pc M.C.C.B Breaker (ACB) 2500A / 3ph
- 1pc multifunction electronic meter
- 1pc voltmeter with selector switch
- 3 pcs signal lamps

and with all necessary accessories.

No 2.00
Stand by generator set
Canopied diesel engine generating set type Duetz, Stamford,
Caterpillar, Cummins or approved equivalent with ATS and of 1500
12 KVA rating at site for 380/220V, 50Hz,1500 RPM operation with base
mounted fuel tank, skid mounted.
No 2.00
Custom designed Under ground fuel tank system
13 capacity of 10000 liters with automatic pumps and accessories
comprising filiter,breather feed and return lines,ultrasonic sensors
dial type content gauge and complete accessories
and connections with detail drawings submitted
before installation in consulation with the engineer unit for fuel tank
to measuring all tank parameter with complete sensors
and transducers , RS485 Port and non volatile memory for network
connection all the civil works as per the manufacturer, local
regulations standards and instruction and recommdtation

Data from Site 13 Site Work

 BILL
DESCRIPTION UNIT QTY. RATE AMOUNT REMARK
ITEM
No 2
14 Octagonal hot deep galvanized steel pole of dia.
180 mm at base and dia. 85mm top mast 3.5mm
thick through out its Length 8000mm above ground
level ,with 1.2meter long single arm to be fixed on 800 x800
x 600 mm (D x L x W) concrete pad with plates
of 8mm thick & 4 ancor bolts diameter 27mm and
700mm long cable entry through PP dia. 32mm ,
fuse box and fuse and solar panel connection as per the
detail drawing
No 12
15 Premanfactured decorated hot deep
galvanized steel pole of dia. 120 mm at base and
dia. 60mm top mast 3mm thick through
out its Length and 3000mm height above ground
level up to the fitting, free fixed door, including
removable panel with clamps for power cables,
and protective fuse holder with proper size fuse
Price to include foundation work and anchor bolts
as complete anchor bolts and minimum 8mm plates
Nº 20
16 Mounting - on top mast 3meter pole
Lamp type-LED
Number of Lamps -LEDs
Lamp holder- poly carbonate with contacts in phosphor bronze
Diffuser- anti dazzle, vandal resistant poly carbonate
with prismatic faceting inside with smooth anti-
dust external surfaces and down reflector
Lamp wattage-50watts/not less than5000lm
output/50000hr Luminare material-fiber glass -
reinforced &Polycarbonate Ingress protection-65
Size - Diameter 480mm and hieght 680mm
With LED driver 90-264V/50000Hrs life time Nº 20

17 Mounting - On arm of 8meter pole

Lamp type-LED
Number of Lamps equivalent no for
Lamp holder- poly carbonate with contacts in phosphor bronze
Diffuser- anti dazzle, vandal resistant poly carbonate
with prismatic faceting inside with smooth anti-
dust external surfaces
Lamp wattage 150W/not less than 22000lm output/50000hrs
Luminare material-fiber glass -reinforced &Polycarbonate
Ingress protection-65
Size - 701x270x79 mm
With LED driver 90-264V/50000Hrs life time Nº 12

18 400 KVAR factory built Automatic controlled power

factor correction capacitor bank of 20capacitor steps
(20X20 KVAR) including complete control system, fans
and wiring using 2(3x185/95sq.mm) cable with protection
system,autocontroller,sensors,automatic and
manual switch, serial/parallel communications ports,
metering, remote terminal units(location shall be
determined on site), HRC fuses for steps Vaccum

contactors SF6 or circuit breaker for in rush current all

necessary accessories, all testedand wired to
relevant IEC standard. Including
1pc front mount digital data logger unit for all electrical
parameters with RS485 Port and none volatile memory for network conn Nº 2

TOTAL TO SUMMARY …………………… BIRR

Data from Site 14 Site Work