LM784XJ3
LM784XJ3
: C521J3
Issued Date : 2007.10.23
CYStech Electronics Corp. Revised Date : 2011.12.02
Page No. : 1/13
LM78XXJ3
I G O I G O
Description
The LM78XXJ3 series of fixed voltage monolithic integrated circuit voltage regulators is designed for a wide range
of applications. These applications include on-card regulation for elimination of noise and distribution
problems associated with single point regulation. Each of these regulators can deliver up to 1A of output
current. The internal current limiting and thermal shutdown features of these regulators make them
essentially immune to overload.
Features:
• 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V, 24V output voltage available
• Internal Short-Circuit Current Limiting
• High Power Dissipation Capability
• Internal Thermal Overload Protection
• No External Components Required
• Output Transistor Safe Area Compensation
• RoHS compliant package
Ordering Information
Device Output Voltage Tolerance Package Shipping Marking
TO-252
LM7805J3 A-rank ±3% 2500 pcs / Tape & Reel 7805
(Pb-free)
TO-252
LM7805J3 B-rank ±5% 2500 pcs / Tape & Reel 7805
(Pb-free)
TO-252
LM7806J3 A-rank ±3% 2500 pcs / Tape & Reel 7806
(Pb-free)
TO-252
LM7806J3 B-rank ±5% 2500 pcs / Tape & Reel 7806
(Pb-free)
TO-252
LM7808J3 A-rank ±3% 2500 pcs / Tape & Reel 7808
(Pb-free)
TO-252
LM7808J3 B-rank ±5% 2500 pcs / Tape & Reel 7808
(Pb-free)
TO-252
LM7809J3 A-rank ±3% 2500 pcs / Tape & Reel 7809
(Pb-free)
TO-252
LM7809J3 B-rank ±5% 2500 pcs / Tape & Reel 7809
(Pb-free)
TO-252
LM7810J3 A-rank ±3% 2500 pcs / Tape & Reel 7810
(Pb-free)
TO-252
LM7810J3 B-rank ±5% 2500 pcs / Tape & Reel 7810
(Pb-free)
TO-252
LM7812J3 A-rank ±3% 2500 pcs / Tape & Reel 7812
(Pb-free)
TO-252
LM7812J3 B-rank ±5% 2500 pcs / Tape & Reel 7812
(Pb-free)
TO-252
LM7815J3 A-rank ±3% 2500 pcs / Tape & Reel 7815
(Pb-free)
TO-252
LM7815J3 B-rank ±5% 2500 pcs / Tape & Reel 7815
(Pb-free)
TO-252
LM7818J3 A-rank ±3% 2500 pcs / Tape & Reel 7818
(Pb-free)
TO-252
LM7818J3 B-rank ±5% 2500 pcs / Tape & Reel 7818
(Pb-free)
TO-252
LM7824J3 A-rank ±3% 2500 pcs / Tape & Reel 7824
(Pb-free)
TO-252
LM7824J3 B-rank ±5% 2500 pcs / Tape & Reel 7824
(Pb-free)
Vin Vout
LM78XX
1 3
2
C1 C2
0.33μF 0.1μF
Note:
C1 and C2 are required if regulator is
located far from power supply filter
and load, or oscillation may induced
on the loop.
Block Diagram
Electrical Characteristics
LM7805 (Tj=0~125°C, Vin=10V, Io=500mA, Cin=0.33uF, Cout=0.1uF, unless otherwise noted)
Symbol Parameter Min Typ Max Conditions Units
A-rank(3%) 4.85 5.0 5.15 Vin=10V, Io=500mA,Tj=25°C
VO Output Voltage 7.5V≤Vin≤20V, 5mA≤Io≤1A, V
B-rank(5%) 4.75 - 5.25 PD≤15W
- 3 50 7V≤Vin≤25V, Tj=25°C
ΔVo Line Regulation mV
- 1 25 8V≤Vin≤12V, Tj=25°C
- - 100 5mA≤Io≤1A, Tj=25°C
ΔVo Load Regulation mV
- - 50 250mA≤Io≤750mA, Tj=25°C
IQ Quiescent Current - - 8 Vin=10V, Io=500mA, Tj=25°C mA
Quiescent Current - - 0.5 5mA≤Io≤1A
ΔIQ mA
Change - - 1.3 7V≤Vin≤25V
Vn Output Noise Voltage - 40 - 10Hz≤f≤100KHz, Tj=25°C μV
RR Ripple Rejection - 80 - 8V≤Vin≤18V, f=120Hz, Tj=25°C dB
VD Dropout Voltage - 2 - Io=1A, Tj=25°C V
Output Short Circuit
ISC - 250 - Vin=35V, Tj=25°C mA
Current
IPK Peak Output Current - 1.8 - Tj=25°C A
ΔVo/ΔTj Temperature Stability - -0.6 - Io=5mA, 0°C ≤Tj≤125°C mV/℃
Characteristic Curves
Reel Dimension
TO-252AB Dimension
Marking:
4
Vout:
5V: 05
Device 6V: 06
Name 78□□ 8V: 08
Date □□□□ 9V: 09
Code 10V: 10
12V: 12
15V: 15
18V: 18
24V: 24
3-Lead TO-252AB Plastic Surface Mount Package Style: Pin 1.Vin 2.Ground 3.Vout
CYStek Package Code: J3 4.Ground
*: Typical
Inches Millimeters Inches Millimeters
DIM DIM
Min. Max. Min. Max. Min. Max. Min. Max.
A 0.087 0.094 2.200 2.400 e *0.091 *2.300
A1 0.000 0.005 0.000 0.127 e1 0.177 0.185 4.500 4.700
B 0.053 0.065 1.350 1.650 H 0.118 REF 3.000 REF
b 0.020 0.028 0.500 0.700 K 0.197 REF 5.000 REF
b1 0.028 0.035 0.700 0.900 L 0.374 0.390 9.500 9.900
C 0.017 0.023 0.430 0.580 L1 0.100 0.114 2.550 2.900
C1 0.017 0.023 0.430 0.580 L2 0.055 0.070 1.400 1.780
D 0.250 0.262 6.350 6.650 L3 0.024 0.035 0.600 0.900
D1 0.205 0.213 5.200 5.400 P 0.028 REF 0.700 REF
E 0.213 0.224 5.400 5.700 V 0.209 REF 5.300 REF
Notes: 1.Controlling dimension: millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material:
• Lead : Pure tin plated.
• Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0.
TO-252AA Dimension
Marking:
Device
Name Vout:
78□□ 5V: 05
Date □□□□ 6V: 06
Code 8V: 08
9V: 09
10V: 10
1 2 3 12V: 12
15V: 15
18V: 18
24V: 24
3-Lead TO-252AA Plastic Surface Mount Package Style: Pin 1.Vin 2.Ground 3.Vout
CYStek Package Code: J3 4.Ground
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
• CYStek reserves the right to make changes to its products without notice.
• CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.