33333333333

CONTENTS
PROGRAMME CALENDAR Sl. Page

2022-23
No No.
About Us 3
Preface 5
General Instructions 6
Norms of the Programmes
I. Contact Mode 6
II. ICT Mode 7
III. In-House Programmes 8
IV. Special Programmes 8
V. Collaborative Programmes 8
Participants Profile 8
How to Reach NITTTR, Kolkata 8
National Level Short Term Training 9 – 53
Programmes through ICT Mode
Faculty Profile 54-79
E-mail Addresses and Phone Numbers 80
of Faculty Members

visit us: www.nitttrkol.ac.in

NATIONAL INSTITUTE OF TECHNIAL TEACHERS’ TRAINING AND RESEARCH, KOLKATA

Block – FC, Sector – III, Salt Lake City, Kolkata – 700 106
 TECHNICAL EDUCATION VISION
TECHNICAL EDUCATION MISSION NITTTR, Kolkata envisions to be the lead resource
institute for promoting excellence in technical
education, management education and
vocational education & training system
 To introduce emerging scientific technologies for development of
effective teaching-learning system in technical education,
 To increase the outreach of training by adopting flexible & Open
Learning Technology,
 To integrate the world of work with the technical education system,
 To assist policy makers as a think-tank in formulating TVET strategies,
 To offer extension services and consultancy appropriate to TVET
system, in collaboration with industry and community partnership,
 To develop and introduce Quality Management System,
 To share experience and collaborate with national and international
agencies involved in technical education for mutual benefits,
 To undertake research in different areas of TVET system.
About Us

National Institute of Technical Teachers’ Training & Research (NITTTR), Kolkata was established in 1965 as Technical
Teachers’ Training Institute, Calcutta. This was the first of four such Institutes (other three being at Chandigarh, Bhopal
and Chennai) established by the Department of Education, Govt. of India as fully centrally funded Autonomous Institution.
The primary focus of the Institute is to provide in-service training to the teachers and staff of Degree and Diploma level
technical institutions and conduct activities related to the quality improvement of the technical education system of the
country. NITTTR, Kolkata has been actively involved in improvement of quality of the technical education system in various
states including those in the north-east through innovative academic interventions, providing assistance to policy makers
at the national and state levels, in formulation of educational plans, projects and their implementation in the fast changing
scenario. By virtue of working closely over the last few decades, this institute has developed a thorough understanding of
the technical educational needs of the states in the eastern region including those in the north-east. Govt. of India, in
2003, accorded national status to the Institute, in recognition to the expert services rendered for overall improvement of
quality of Technical Education System. NITTTR, Kolkata acts as a catalyst in introducing changes in the various components
of technical education system, plays a proactive role in identifying changes in the industry, technology, economy and
society and acts as a facilitator in this process of change.

Some of the notable national level projects in which the Institute is associated are Nodal agency to Centrally Sponsored
Community Development through Polytechnic Scheme, Designing & conducting AICTE sponsored “Induction Training
Programme” for fresh teachers of engineering and polytechnic colleges, Facilitating implementation of Centrally sponsored
Scheme for Integrating Persons with Disabilities (PWD) in the mainstream of Technical & Vocational Education etc.

The focal activities of the Institute are Short Term Training, Curriculum Development, Learning Resources Development,
Research in the field of Technical Education System, Educational Management and Extension Services. Besides regular
activities, the Institute has been offering, since 2003, AICTE approved M. Tech. Degree Programme in Manufacturing
Technology, affiliated to WBUT. During 2005-2006 two more M. Tech. Programmes namely Multimedia & Software Systems
and Mechatronics Engineering were started. The M. Tech. Programme in Structural Engineering was also started from
2011-12. The Institute has highly qualified faculty members and excellent infrastructural support in the form of well-
equipped laboratories, computers, library facilities, Welding Centre, CAD/CAM and other resources. The institute has two
Extension Centres one at Guwahati and the other in Bhubaneswar for reaching out to its clients in the North-east and
Orissa. At present this Institution is also focusing on others, Teachers’ Training through ICT Mode.
Preface
Like previous years, National Institute of Technical Teachers’ Training and Research (NITTTR),
Kolkata has prepared its Programme Calendar for the year 2022-23.

In order to fulfill the needs of technical teachers of the country, Short- Term Training
programmes (STTP) in the following modes are planned.

1. Contact mode at NITTTR, Kolkata and/or the extension centres

2. ICT-based Programmes
3. In-House Programmes
4. Demand-based Special Programmes (both offline and online)
5. Hybridmode

The schedules of the trainings planned in this calendar are not exhaustive. The Institute also
provides trainings based on specific needs of various stake holders including Private Technical
Institutes following the guidelines of the Institute. Further, In-House training may be organized
to fulfil the requirement of Faculty Development Programme of various Technical Institutes.
It is intended that all Technical Institutes will come up with their needs and take advantage of
services provided by NITTTR, Kolkata. This helps to upgrade the learning-teaching system of
the institutes and in turn, enriches the education system of the country.
 NATIONAL INSTITUTE OF TECHNICAL TEACHERS’ TRAINING AND RESEARCH, KOLKATA
Registration for STTP – Application Form

1 Prog. Code :

2 (a) Programme Title :

(b) Date : From: To:

(c) Prog. Coordinator(s) :

3 (a) Name (in CAPS) :

First Middle Last
(b) Designation :

(c) Department :

(d) Institution :

(e) Institute Address :

Pin:
State

(f) Caste : (g) Gender

(h) Contact Number :

Mobile

Email
4 Highest Academic Qualification:
Degree/Diploma University/Others Year of Passing Class Obtained

5 (a) Experience (in years) : Teaching Industry/Field

6. Payment of Convenience Charge Rs. 118/- Paid – Yes  No , If yes, Receipt No. _______________________
I promise to attend the above mentioned training programme, if selected.
Date: Signature of the Applicant

This is to certify that the applicant will be released to attend the training programme, if selected, without any financial
liability on part of the sponsoring authority.

Date: Signature of the Sponsoring Authority with Seal

NOTE: Application without Signature & Seal of the Sponsoring Authority will not be considered for
selection.
Scan copy send by Email: [email protected]
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

NATIONAL LEVEL SHORT TERM TRAINING PROGRAMMES

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

1. CU01 ICT Kol Earthquake Resistant Mithu Dey 04/04/2022 08/04/2022 1 Faculty of Civil engg After attending the program, participants are expected to be able
Structures (special and allied braches to
emphasis will be given on  Understand the earthquake effect on structures.
FEMA-356, IS 1893-2016  Know the different methods of analysis using software
and IS 13920-2016)  Familiar with different codal provisions for analysis and design
of structures
 Familiar with advanced technology to make the earthquake
resistant structures
2. CU02 ICT Kol Introduction to SCILAB Kinsuk Giri 04/04/2022 08/04/2022 1 All Discipline On successful completion of the programme the participants will
be able to
 get an exposure on SCILAB
 get an overview on solution techniques
 solve problems using SCILAB
3. MGT01 ICT Kol Managerial and Technical Sukanta Kumar 04/04/2022 08/04/2022 1 Staff from all After successful completion of the program, the participants will be
Skills for Non-Teaching Naskar & Arpan technical able to
Employees Kumar Mondal institutions  Explain the various managerial skills required for non-teaching
employees
 Apply various technical skills required for non-teaching
employees
4. PS01 ICT Kol Development of Sagarika Pal 04/04/2022 08/04/2022 1 Faculty of Electrical, After completing the course the participants will be able to
Laboratory Instruction Mechanical,  Select the laboratory experiments from curriculum
and Manual Electronics &  Prepare laboratory manual
Instrumentation  Guide student to perform laboratory experiment
disciplines  Evaluate the laboratory performance of students
 Guide students’ project work
 Evaluate students’ project work
5. CU03 ICT Kol Power Generation from Sheela Yadav Rai 04/04/2022 08/04/2022 1 All Discipline After attending the programme the participants will be able to
Energy Resources  Understand potential sources of conventional energies for
power generation
 Describe potential sources of non-conventional energies for
power generation
 Understand environmental aspects of power generation
 Appreciate about various power projects
6. CU04 Contact Kol Analog Electronics Soumitra Kumar 04/04/2022 08/04/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Mandal Tech. of Engg. &  Study the operations and characteristics of Analog devices
Polytechnic in EE,  Design of Analog circuits
ECE, EIE & Allied  Implement Analog electronics circuits using software
Branch.
Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management
Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

7. CU05 Contact Kol Design and Development Rajeev Chatterjee 04/04/2022 15/04/2022 2 Faculty of all After going through this program, the participants will be able to:
of Content for e-Learning & Ranjan disciplines  explain the concept of e-learning, TEL
Dasgupta  explain synchronous and asynchronous e-learning models,
 explain the various standards available for e-learning,
 explain the basis terminologies such as Learning Objects,
sharable Content Objects, SCO,
 explain and demonstrate ADDIE Model of ISD,
 Explain the importance of assessment and item development,
 exhibit and demonstrate the process of e-content creation for
MOOCs based e-content.
 develop e-content chunks / learning object in their own subject
domain, and
 exhibit and demonstrate e-learning tools and technology.
 Explain the concept of lifelong learning
8. CU06 ICT Kol Refresher Course on Nirmal Kumar 11/04/2022 22/04/2022 2 Mechanical, After attending the programme the participants will be able to
Mechanical Engineering Mandal Production,  Explain trends of mechanical engineering with special emphasis
Industrial, and in manufacturing technology
allied disciplines  Explain advanced welding processes
 Select a particular manufacturing process
9. CU07 Contact BBSR Introduction to Coding Rajeev Chatterjee 18/04/2022 22/04/2022 1 Faculty of all After participating in this program, the participants will be able to:
Theory disciplines  Explain information, quality of Information, and Information
entropy,
 Demonstrate the working principles and design of AES, DES,
 Demonstrate various encoding techniques like Arithmetic
Encoding, Huffman Encoding, Hamming Code, Gray code, JPEG
Encoding Standard, etc., and
 Demonstrate the applications of coding techniques in the area
of Networking and Communication
10. PS02 ICT Kol Designing Curriculum Urmila Kar 18/04/2022 22/04/2022 1 Faculty members After attending the programme, participants will be able to:
under OBE and technicians  Demonstrate curriculum development process
from all technical  Analyse content of technical curriculum
institutes  Identify the Features of Outcome Based Education System.
 Explain the components and Features of Outcome Based
Curriculum.
 Develop Curriculum Content under Outcome Based Education
11. PS03 ICT Kol Role of Technical Sheela Yadav Rai 18/04/2022 22/04/2022 1 All Discipline After attending the programme the participants will be able to :
Institutions in  Know various Community Development Schemes
Community Development  Understand Feasibility Report
 Prepare Planning Report
 Make the Curricula
 Estimate the Training cost

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

12. PS04 Contact Kol Entrepreneurship Subrata Mondal 18/04/2022 22/04/2022 1 Faculty of all After attending this programme, participants would be able to:
Development disciplines  explore concept of entrepreneurship;
 identify internal and external factors for entrepreneurship;
 explore characteristics of an entrepreneur;
 explore entrepreneurial motivation and barrier;
 explore stages in entrepreneur process;
 explore research commercialization;
 explore technology business incubation Centre etc.
13. PS05 Contact Kol Environmental Sampling Sailendra Nath 18/04/2022 29/04/2022 2 Faculty and Staff of After attending the programme the participants will be able to
and Analysis Mandal all disciplines acquire
 knowledge of concept and purpose of sampling, different
class of sampling, preservation techniques, analytical methods,
different standards of environmental samples,
 skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test
report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory
performance in related to environmental laboratory,
 attitude of hand-on working in the laboratory/field (Plant Visit)
14. MGT02 ICT Kol Refresher Course on Chandan 18/04/2022 29/04/2022 2 Faculty of all After completion of this course the participants will be competent
Research Methodology Chakraborty disciplines enough to
 Develop understanding of the research design, interdisciplinary
research in the line of NEP 2020.
 Explore about systematic literature review with meta-analysis,
PRISMA
 Gain knowledge in data analytics using statistical methods
 Hands-on-training with Excel and SPSS for data analysis.
 Paper writing, thesis reporting etc.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

15. CU08 ICT Kol Refresher Course in Jagat Jyoti 25/04/2022 29/04/2022 1 Faculty members of After attending the programme the participants will be able to
Geotechnical Engineering Mandal Civil & allied  Explain index properties. consistency, and particle size
disciplines (Specially distribution of soil and their importance in geotechnical
new recruits) engineering
 Explain importance of soil classification & Classify soil as per
Indian standards specifications
 Explain flow through soil and concepts of flownets
 Explain the concept of consolidation of soil and determine the
consolidation characteristics of soil from laboratory data
 Explain and define strength characteristics of soil and
determine the strength characteristics of soil from laboratory
data
 Explain Earth pressure theories and compute earth pressure
from first principles
 Explain fundamental consideration of slope stability analysis
with examples
 Impart acquired knowledge to students in a systematic manner
16. MGT03 ICT Kol Institutional Management Sukanta Kumar 25/04/2022 29/04/2022 1 Teachers, After attending the programme, participants will be able to:
and Administrative Naskar Administrators and  Manage department effectively
Procedures Support Staff  Manage institute effectively
17. CU09 Contact Kol Modern Control Prasanta Sarkar 25/04/2022 29/04/2022 1 Faculty of After attending the programme, the participants will be able to
Engineering  Model physical systems in state space
Disciplines  Realise state space model from Transfer function
 Determine Controllability and observability
 Design controller and observer
 Apply MATLAB Control System Toolbox
18. CU10 Contact Kol DC Machines and Subrata 25/04/2022 29/04/2022 1 Faculty from After attending the course the participants will be able to
Transformer Chattopadhyay Electrical,  Understand the working principle, operation and maintenance
Electronics, of the following machines
Instrumentation o DC Generator
and allied o DC Motor
disciplines o Transformer
o Stepper Motor
o Brush less Motor
 Classify the Hazardous areas in Industries for selecting the
machines in operation
 Familiar with the source of ignition in Industries.
 Explain the Electrical Protection system used in Hazardous
area.
 Know about the ingress protection.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

19. CU11 Contact Guw Introduction to Coding Rajeev Chatterjee 02/05/2022 06/05/2022 1 Faculty of all After participating in this program, the participants will be able to:
Theory disciplines  Explain information, quality of Information, and Information
entropy,
 Demonstrate the working principles and design of AES, DES,
 Demonstrate various encoding techniques like Arithmetic
Encoding, Huffman Encoding, Hamming Code, Gray code, JPEG
Encoding Standard, etc., and
 Demonstrate the applications of coding techniques in the area
of Networking and Communication
20. CU12 Contact Kol AutoCAD for Engineers Mithu Dey 09/05/2022 13/05/2022 1 Faculty and Staff of After attending the program, participants are expected to be able
all disciplines to
 Know the different commands of the Software
 Draw the 2D and 3D
 Appreciate the use of AutoCAD in Engg. And Science
21. CU13 Contact Kol Laboratory Practice on Uday Chand 09/05/2022 13/05/2022 1 Laboraotry After attending the programme the participants will be able to
Brick and Cement Kumar Instructor /  Explain basic concepts on laboratory tests of Bricks, cement
Technician /  Guide students in conducting different laboratory experiments
Assistant of Civil for determination of various parameters.
Engg. and allied  Demonstrate different tests on cement and Brick.
branches deptt.
22. PS06 Contact BBSR Word Processing with Kinsuk Giri 09/05/2022 13/05/2022 1 All Discipline On successful completion of the programme the participants will
LaTeX be able to
 get exposure in Word Processing Tools
 describe the fundamentals LaTeX programming
 apply LaTeX for preparing scientific and non-scientific
documents
23. PS07 ICT Kol Estimating & Costing of Sheela Yadav Rai 09/05/2022 13/05/2022 1 All Discipline After attending the programme the participants will be able to :
Non-conventional  Describe various type of Non-conventional Energies Sources
Energies  Understand the scope of Solar energy, Solar Thermal
Conversion, Solar Collector, Wind Energy
 Estimating & costing of various energies
24. PS08 ICT Kol How to Write Thesis and Rayapati 9/05/2022 1 All Discipline At the end of the programme, the participants will be to:
Research paper Subbarao 13/05/2022  Describe the steps involved in writing a thesis.
 Identify the scope of a thesis.
 Construe the results in a better way.
 Derive conclusions from the plots and contours made.
 Realize the ways of writing a research paper.
 Communicate a paper in their area of research.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

25. PS09 Contact Kol Testing of Drinking Water Sailendra Nath 09/05/2022 20/05/2022 2 Faculty and Staff of
After attending the programme the participants will be able to
and its Importance Mandal all disciplines gain and develop
1. knowledge of water parameters, methods of testing techniques
of drinking water and its importance
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test
report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory
performance in related to drinking water testing laboratory,
3. attitude of hands-on-working in the laboratory/field(Plant Visit)
26. CU14 Contact Kol IP Networking Rajeev Chatterjee 09/05/2022 20/05/2022 2 Faculty of CSE, IT After participating in this program, the participants will be able to:
Computer • Explain the concept of Computer Network and Internetwork,
Application, • Demonstrate Network Media and Topology
Electronics, • Identify the various components of Network and Internetwork,
discipline • Explain the various protocols in TCP/IP Suite,
• Explain the concept of switching and routing,
• Demonstrate configuration of the devices such as routers,
switches, etc.,
• Design their own campus wide network and IT infrastructure,
27. CU15 ICT Kol Fluid Mechanics and Dipankar Bose 09/05/2022 20/05/2022 2 Faculty members of After attending the programme the participants will be able to
Machinery Technical  know classification and properties of fluid
Institutions with  state principles of hydrostatics and buoyancy
ME, Production,  explain the principle of dynamics of flow
Automobile Engg.  understand the concept of flow through pipes and openchannel
Specialization flow
 know classification of fluid machines
 understand working principles of different fluid machines
28. PS10 Contact Kol Effective Training Sukanta Kumar 16/05/2022 20/05/2022 1 Teachers, After attending the programme, participants will be able to:
Naskar Administrators  Understand the components of HRD
 Identify the stages for conducting a training programme
 Design a training programme
 Apply differt techniques for conducting a training programme
 Evaluate effectively outcome of a training programme
29. CU16 ICT Kol Fundamentals of Image Indrajit Saha 23/05/2022 27/05/2022 1 CSE, IT, BCA, MCA, After attending the program, the participants will be able to
Processing ECE, EE, ME, CIVIL  describe the fundamentals of image processing (IP) in MATLAB
 apply MATLAB commands to do IP
 explain image processing in classroom
30. PS11 ICT Kol Writing Research Habiba Hussain 23/05/2022 27/05/2022 1 Faculty from all After attending the programme, participants will be able to:
Proposal disciplines  Identify components of a research proposal
 Distinguish between the types
 Draft a research proposal

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

31. CU17 Contact Kol MATLAB and its Prasanta Sarkar 23/05/2022 27/05/2022 1 Faculty and After attending the programme, the participants will be able to
Applications Technical Staff of  Familiarise with MATLAB commands
Engineering  Use MATLAB Commands
Disciplines  Develop MATLAB script and function files
 Solve Engineering Problems using MATLAB
32. CU18 Contact Kol CNC Machining System Nirmal Kumar 23/05/2022 27/05/2022 1 Mechanical, After attending the programme the participants will be able to
Mandal Production,  Explain CNC Technology.
&Industrial  State the constructional features of CNC Machines
33. PS12 ICT Kol Induction Training Subrata Mondal 23/05/2022 27/05/2022 1 Faculty of all After attending this programme, participants would be able to:
disciplines  explore duties and responsibilities of a faculty;
 explore instructional objectives and planning;
 introduce concept of active learning;
 explore various methods of teaching;
 explore classroom management;
 explore the importance of quality in education;
 explore aims of laboratory in technical education;
 explore question banking and assessment methods;
 explore e-learning in teaching etc.
34. CU19 ICT Kol Digital Pedagogy and Arpan Kumar 23/05/2022 27/05/2022 1 Techical teachers After going through this program the participants will be able to:
Tools for Teaching and Mondal & Kinsuk and staff from all  Explain the need for online pedagogy
Learning Giri disciplines  Plan online instruction
 Explain the concept of online Mode of teaching-learning,
 Understand the use of various digital tools,
 Apply different online tools for e-learning
 Apply different online tools for e-assessment
 Incorporate different principles for effective online delivery
35. CU20 Contact Kol Control System – using Soumitra Kumar 30/05/2022 03/06/2022 1 Faculty and Lab. After attending the program, the participants will be able to
MATLAB Mandal Tech. of Engg. &  Design of Control System using MATLAB
Polytechnic in EE,  Discrete-Time Systems
ECE, EIE & Allied  Fuzzy Logic Control
Branch.  Application of Fuzzy Logic Tool Box

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

36. CU21 ICT Kol Refresher Course on Chandan 30/05/2022 10/06/2022 2 Faculty of On successful completion of the course the participants will be
Machine Learning with R Chakraborty Engineering & able to
Science, Allied  Develop knowledge and understanding of the most common
disciplines types of machine learning problems for Engineering
applications,
 Explore the overview and learning skill with R Studio,
 Expose with the design and development of Supervised
Machine Learning Algorithms with R programming
 Also Develop Unsupervised machine learning models with R
programming
 Deploy ML algorithms for engineering problem solution through
project based learning.
37. PS13 ICT Kol Induction Training Urmila Kar 30/05/2022 10/06/2022 2 Faculty members After attending the programme, participants will be able to:
programme Phase - I and technicians  Explain the quality issues in Technical Education and Role of
from all technical Teachers
institutes  Illustrate the process involved in Curriculum Development,
Implementation and Reforms
 Decide learning outcomes of specific course
 Identify teaching strategy, methods and skills
 Plan instruction
 Assess performance of learners
38. CU22 ICT Kol Introduction to Finite Mithu Dey 06/06/2022 10/06/2022 1 Faculty of Civil engg After attending the program, participants are expected to be able
Element Method and allied braches to
 Understand the different methods of structural analysis
 Familiar with FEM
 Apply the FEM in solving problems
 Know the use of FEM based software for analysis
39. PS14 ICT Kol Community Development Sheela Yadav Rai 06/06/2022 10/06/2022 1 All Discipline After attending the programme the participants will be able to :
through Technical  Know various Community Development Schemes
Institutes  Understand Feasibility Report
 Prepare Reports
 Make linkages with organisations

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

40. MGT04 Contact Kol Laboratory Safety Subrata Mondal 06/06/2022 17/06/2022 2 Faculty of all After attending this program, participants would be able to:
Management disciplines and  demonstrate the safety management in the laboratory work
laboratory areas;
technicians  evaluate the risk assessment for the hazardous laboratory
works;
 identify the emergency and safety equipment for laboratory
works;
 demonstrate fire safety management in the laboratory work
areas;
 describe the waste management for the laboratory etc.
41. CU23 Contact Kol Advance Programming in Rajeev Chatterjee 13/06/2022 17/06/2022 1 Faculty of all After going through this program the participants will be able to:
C disciplines  Demonstrate the various operation on single and multi –
dimensional arrays and structures,
 Demonstrate programs related to functions and pointers, and
 Demonstrate programing skills on dynamic allocation of
memory using linked list.
42. CU24 ICT Kol Control System analysis Prasanta Sarkar 13/06/2022 17/06/2022 1 Faculty of After attending the programme, the participants will be able to
and Design with MATLAB Engineering  Model physical systems
Disciplines  Analyze in time & frequency domain
 Determine input – output stability
 Design controller
 Apply MATLAB Control System Toolbox
43. CU25 Contact Kol Digital Electronics Soumitra Kumar 13/06/2022 17/06/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Mandal Tech. of Engg. &  Study the operations and characteristics of Digital devices
Polytechnic in EE,  Design of Digital circuits
ECE, EIE & Allied  Implement digital electronics circuits using VHDL and Verilog
Branch.
44. CU26 Contact Kol Power Plant Engineering Subrata 13/06/2022 17/06/2022 1 Faculty from Elect., After attending the course the participants will be able to
Chattopadhyay Mech., Electronics,  Understand electrical equipment used in power plant
Instrumentation  Know instrument transformers [CT & PT] and their applications
and allied  Familiar with measurement and instrumentation in power plant
disciplines  Classify the Different types of transducers and fundamental of
pressure, flow, temperature, level, velocity, acceleration,
vibration, position, displacement measuring transducers used in
power plant.
 Application of PLC & DCS in power plant
 Apply SCADA and power plant automation
 Design boiler, furnace instrumentation and control
 Know hazardous area classification

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

45. PS15 ICT Kol Assessment and Dipankar Bose 13/06/2022 17/06/2022 1 Faculty members of After attending the programme the participants will be able to
Evaluation all technical  Differentiate between assessment and evaluation
Institutions  Know attributes of effective teaching for quality assessment
and evaluation of students’ performance
 State various toots of assessment
 Understand classroom assessment and evaluation
 Know the techniques of question paper setting
46. PS16 Contact Kol Academic Research Kinsuk Giri, Samir 13/06/2022 24/06/2022 2 All Discipline On successful completion of the programme the participants will
Writing and LaTeX Roy & Rayapati be able to
Subbarao  Define the ways of solving various research problems.
 Identify the steps involved in writing a thesis and research
paper.
 Discuss the aspect of results and discussion in a better way.
 Understand the use of Latex for research purposes.
47. PS17 ICT Kol Advanced Pedagogy Habiba Hussain 13/06/2022 24/06/2022 2 Faculty from all After attending the programme, participants will be able to:
disciplines  Evaluate existing pedagogical practices in higher education
 Examine innovative practices in teaching
 Analyse hybrid model for enhancing learning
 Categorise learning styles
 Analyse hybrid model for enhancing learning
 Incorporate technology in teaching
 Analyse hybrid model for enhancing learning
 Assess learning performance
48. CU27 ICT Kol Commentary on the Santanu Bhanja 20/06/2022 24/06/2022 1 Faculty of Civil, After attending the programme, the participants will be able to
Indian Standard on Plain Architecture & allied  Identify the steps to be taken for concrete production, quality
and Reinforced Concrete disciplines control and testing
- IS:456-2000 with  Interpret some of the important clauses of the code in their
Amendments true letter and spirit
 Implement the codal clauses in a better manner for design and
construction of Civil Engineering Structures
 Understand the philosophy and principles of Limit State Method
in a comprehensive manner
 Conceive that this code cannot be considered as a one package
for the design of concrete structures and has to be mandatorily
read in conjunction with other codes
 Identify the major design and detailing considerations
 Be introduced to the Amendments of this standard
 Be introduced to the limitations and probable modifications

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

49. CU28 ICT Kol Introduction to Data Indrajit Saha 20/06/2022 24/06/2022 1 CSE, IT, BCA, MCA, After attending the program, the participants will be able to
Science ECE, EE, ME, CIVIL  analyze the data using various statistical methods in MATLAB
 visualize the data for better understanding
 develop prediction model for real-life data driven problems in
MATLAB
50. CU29 ICT Kol Data Analytics with Nirmal Kumar 20/06/2022 24/06/2022 1 All Disciplines After attending the programme the participants will be able to
MATLAB Mandal  Fit a curve
 Measure error of a fitting
 Analyse the error
 Perform regressions
51. PS18 ICT Kol Water Treatment Sailendra Nath 20/06/2022 01/07/2022 2 Faculty and Staff of After attending the programme the participants will be able to
Technology Mandal all disciplines acquire
1. knowledge of water treatment processes for drinking water
production
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test
report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory
performance in related to drinking water treatment laboratory,
3. attitude of hands-on-working in the laboratory/field(Plant Visit)
52. PS19 Contact Kol Induction Training Sukanta Kumar 20/06/2022 01/07/2022 2 All Discipline After attending the programme participants will be able to:
Naskar  Develop concept of curriculum development
 Manage the classroom effectively
 Identify instructional objectives
 Develop lesson plan
 Identify quality parameters of Technical Education
 Identify managerial roles of a teacher
53. PS20 ICT Kol Accreditation Process and Urmila Kar 27/06/2022 01/07/2022 1 Faculty members, After attending the programme, participants will be able to:
NBA Technicians and  explain the need for and types of Accreditation in Higher
Administrators from Educational Institutes
all AICTE approved  illustrate the steps involved in Accreditation Process in Higher
institutes Educational Institutes
 explain the features of Outcome Based Accreditation(OBA)
 explain the role of NBA with reference to OBA
 explain the process of preparing self-assessment report (SAR)
for Accreditation by NBA
54. CU31 Contact Kol Control System – using Soumitra Kumar 04/07/2022 08/07/2022 1 Faculty and Lab. After attending the program, the participants will be able to
LABVIEW Mandal Tech. of Engg. &  Design of Control System using LABVIEW
Polytechnic in EE,  Discrete-Time Systems
ECE, EIE & Allied  Fuzzy Logic Control
Branch.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

55. PS21 ICT Kol NBA Accreditation and Rayapati 04/07/2022 08/07/2022 1 Any faculty At the end of the programme, the participants will be to:
SAR Preparation Subbarao  Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational Objectives.
 Prepare Outcomes and Program Outcomes.
 Learn how to prepare SAR.
 Practice Criteria i to x.
56. CU32 Contact Kol Network Infrastructure Rajeev Chatterjee 04/07/2022 15/07/2022 2 Faculty of CSE, IT After participating in this program, the participants will be able to:
Management Computer • Explain the concept of Computer Network and Internetwork,
Application, • Identify the various components of Network and Internetwork,
Electronics, • Explain the various protocols in TCP/IP Suite,
discipline • Explain the concept of switching and routing,
• Explain LAN and VLAN,
 Demonstrate configuration of the devices such as routers,
switches, etc.,
 Data Centre Management
 Explain the concept of network security.
 Explain the Working Principle of Storage System
57. CU33 ICT Kol Engineering Capstone Prasanta Sarkar 11/07/2022 15/07/2022 1 Faculty and After attending the programme, the participants will be able to
Project Technical Staff of all  Form Capstone Project Team
Disciplines  Identify Capstone Project topic
 Prepare Capstone Project proposal
 Develop Capstone Project
 Assess Capstone Project
58. PS22 ICT Kol Renewable Energy Sheela Yadav Rai 11/07/2022 15/07/2022 1 All Discipline After attending the programme the participants will be able to:
Sources and Emerging  Understand Energy Sources and their utilization
Technologies  Explain Environmental aspects of electric energies generation
 Understand the scope of Solar Thermal Conversion and Solar
Photovoltaic system
 Describe about wind energy, Geothermal energy and Biomass
 Apply Non-conventional energies through various agencies
 viz. WBREDA
59. CU34 Contact Kol Fluid Power Dipankar Bose 11/07/2022 15/07/2022 1 Faculty members of After attending the programme the participants will be able to
Technical -know principles and applications of fluid pwered systems
Institutions with -understand the working principles of various fluid pwererd
ME, Production, systems
Automobile Engg. -state characteristics of different fluid powered sustems
Specialization

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

60. PS23 ICT Kol Digital Tools for Faculty Arpan Kumar 11/07/2022 15/07/2022 1 Techical teachers After going through this program the participants will be able to:
and Staff Mondal & Kinsuk and staff from all  Explain the need for online pedagogy
Giri disciplines  Plan online instruction
 Explain the concept of online Mode of teaching-learning,
 Understand the use of various digital tools,
 Apply different online tools for e-learning
 Apply different online tools for e-assessment
 Incorporate different principles for effective online delivery
61. CU35 Contact Kol Concrete Mix Santanu Bhanja 18/07/2022 22/07/2022 1 Faculty of Civil, After attending the course, the participants will be able to
Proportioning as per IS Architecture & allied  Understand the process of selection of good ingredients of
10262 - 2019 disciplines concrete
 Identify the important properties of concrete
 Be acquainted with the process of concrete mix design as per
the latest code of practice
 Be familiar with mix design of different types of concrete
 Identify different types of admixtures and their use
62. PS24 ICT Kol Values and Ethics for Mithu Dey 18/07/2022 22/07/2022 1 Faculty and Staff of After attending the program, participants are expected to be able
Professional all disciplines to
 Explain the concept of Professional Values, Ethics and Attitude
 Identify issues and challenges in ethical practice
 Identify the ways and means for ensuring ethical behaviour by
teachers
 Practice the roles of ‘Technical Teachers as Professionals’ in
establishing the; Guru-Shisya Parampara’ in present context
 Describe the roles of technical teachers in sustainability
development
63. PS25 ICT Kol Environmental Chemistry Sailendra Nath 18/07/2022 22/07/2022 1 Faculty and Staff of After attending the programme the participants will be able to acquire
Mandal all disciplines 1. knowledge of chemistry of water, wastewater and ambient
atmosphere,
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test report,
providing laboratory instructions to develop inquiring attitude among
the student and evaluation of laboratory performance in related to
environmental chemistry laboratory,
3. attitude of hands-on-working in the laboratory/field (Plant Visit)
64. PS26 ICT Kol Effective Teaching Habiba Hussain 18/07/2022 22/07/2022 1 Faculty from all After attending the programme, participants will be able to:
disciplines  Characterise effective teaching
 Identify essential parameters for effective teaching  Practise
few active learning strategies
 Assess teaching effectiveness

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

65. CU30 Contact Kol NBA Accreditation and Uday Chand 18/07/2022 22/07/2022 1 Faculty and Staff ofAfter attending the course the participants will be able to
Document preparation Kumar all disciplines  Find the impact of NBA Accreditation
 Prepare Vision, Mission, CO, PO and PEO.
 Prepare SAR Documents.
66. CU36 Contact BBSR Theory, Operation and Subrata 18/07/2022 22/07/2022 1 Faculty from After attending the course the participants will be able to
Experimentation on Chattopadhyay Electrical,  Classify the Different types of Transducers & Actuators used in
Sensors, Transducers & Mechanical, Industry.
Actuators Electronics,  Familiar with the overview of measurement system and
Instrumentation selection of instruments
and allied  Understand fundamental of pressure, flow, temperature, level,
disciplines velocity, acceleration, vibration, position, displacement
measuring transducers used in process industries.
 Apply the Transducers Actuators in process Control Systems.
 Know the concept of Intrinsic safety instruments
67. CU37 Contact Kol Advanced Materials Subrata Mondal 18/07/2022 22/07/2022 1 Faculty of Chemical After attending this program, participants would be able to:
Science and Engineering Engg. Mechanical  explain the structure sensitive properties of polymers, metals
Engg., Science, and alloys;
Textiles Engg.,  explain the fundamental of nanomaterials, types of
Materials Sci. & nanomaterials, principle methods of nanomaterials preparation,
Engg., Polymer properties and applications;
Engg. and allied  explain types, manufacturing process, properties and
disciplines applications of metal matrix, ceramic matrix and polymer
matrix composites/nanocomposites;
 explain biocompatible and biodegradable materials,
characteristics and applications for various biomaterials etc.
68. CU38 ICT Kol Fundamentals of Data Indrajit Saha 25/07/2022 29/07/2022 1 CSE, IT, BCA, MCA, After attending the program, the participants will be able to
Security ECE, EE, ME, CIVIL  describe the fundamentals of Data Security
 demonstrate how to maintain the privacy of computer data
 explain network security in classroom
69. MGT05 Contact Kol Managerial Skills for Sukanta Kumar 25/07/2022 29/07/2022 1 Teachers, After attending the training programme participants will be able to:
Teachers Naskar Administrators and  Demonstrate the managerial skill effectively
Support Staff  Identify managerial skills of a teacher
70. CU39 ICT Kol Electrical and Electronics Soumitra Kumar 25/07/2022 29/07/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Circuits - Analysis and Mandal Tech. of Engg. &  Understand fundamentals of MATLAB
Design using MATLAB Polytechnic in EE,  Implement MATLAB Applications in Electrical and Electronics
ECE, EIE & Allied Circuit
Branch.  Explain the different aspect of MATLAB & Simulink
 Solve simple problem using MATLAB programming
 Develop simple model using Simulink
 Use MATLAB in analysis, design and simulation of Electrical and
Electronics Circuit problems
Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management
Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

71. CU40 ICT Kol Data Analytics with SPSS Chandan 25/07/2022 05/08/2022 2 Faculty of After completion of this course, the participants will be able to
/ Excel Chakraborty & Engineering &  Deliver descriptive statistics for univariate, bivariate and
Samir Roy Science disciplines multivariate data analysis,
 Explore correlation and regression analysis (linear, multiple and
logistic)
 Address Curve fitting with Least Square method,
 Demonstrate Testing of Hypothesis for statistical decision
making,
 Explore data classification and clustering methods.
 Get expose hands-on-training using SPSS and Excel software,
 Scientific interpretation as required for publication, thesis
writing and report generation.
72. PS27 ICT Kol Advanced Pedagogy Sagarika Pal & 25/07/2022 05/08/2022 2 Faculty of all After completing the course the participants will be able to
Subrata desciplines • Use concept map
Chattopadhyay • Design Curriculum
• Develop Instructional media
• Develop Student Support Systems
• Apply techniques for appropriate assessment and evaluation
• Introduce problem based learning techniques
73. PS28 Contact Guw Environmental Pollution Sailendra Nath 01/08/2022 05/08/2022 1 Faculty and Staff of After attending the programme the participants will be able to acquire
and Control Mandal all disciplines 1. knowledge of air pollution, water pollution, noise pollution,
parameters, standards, effects
2. skill of handling equipment, performing experiments, interpreting
results, preparing test report, providing laboratory instructions to
develop inquiring attitude among the student and evaluation of
laboratory performance in related to environmental pollution
laboratory,
3. attitude of hands-on-working in the laboratory/field (Plant visit)
74. CU41 ICT Kol Introduction to Software- Rajeev Chatterjee 01/08/2022 05/08/2022 1 Faculty of CSE, IT After successful completion of the program, the participants will
Defined Networking Computer be able to
(SDN) Application, • Explain the concept of SDN,
Electronics, • Demonstrate controller management in SDN,
discipline • Exhibit the SD based WAN & Mobile Networks, and
• Explain Security issues and Back-up Restoration in SDN.
75. CU42 Contact Kol Concept of Software Samir Roy & 01/08/2022 05/08/2022 1 Faculty of CSE, IT, After successful completion of the program, the participants will
Engineering Ranjan Dasgupta MCA disciplines be able to
 explain different quality aspects of a software
 critically analyse different software development models
 explain design theory

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

76. MGT06 ICT Kol People Management & Habiba Hussain 01/08/2022 05/08/2022 1 Faculty from all
After attending the programme, participants will be able to:
Leadership disciplines  Influence others through communication
 Work across teams
 Lead for collaborative learning
 Provide feedback for better understanding
 Encourage growth mindset
77. CU43 ICT Kol CAD/CAM Nirmal Kumar 01/08/2022 05/08/2022 1 Mechanical, After attending the programme the participants will be able to
Mandal Production,  Define automation.
&Industrial  Classify automation.
 State the essential features of CAD/CAM
78. SPL05 ICT Kol Concept Teaching Of Dipankar Bose 01/08/2022 12/08/2022 2 Faculty Members After attending the programme the participants will be able to
Engineering Mechanics from all Engineering know various methodologies in concept teaching of
Disciplines Engineering Mechanics
understand principles of statics with applications
understand principles of dynamics with applications
79. CU44 Contact Kol PYTHON Programming Kinsuk Giri 08/08/2022 19/08/2022 2 All Discipline On successful completion of the programme the participants will
be able to
 understand and explain the different aspects of PYTHON
 apply PYTHON to solve problems
 use PYTHON for visualizations
80. CU45 ICT Kol Analysis and Design of Mithu Dey 08/08/2022 12/08/2022 1 Faculty of Civil engg After attending the program, participants are expected to be able
Structures using and allied braches to
Software  Understand the different methods of structural analysis
 Different structural elements (RCC & Steels structures) by Limit
State Method.
 know the different codal provision for the design
 Use of software for analysis.
81. MGT07 Contact BBSR Essentials of Strategic Sukanta Kumar 08/08/2022 12/08/2022 1 Teachers, After attending the programme, the participants will be able to:
Management Naskar Administrators  Understand the concept of strategic management
 Apply the concept of strategic planning
 Identify steps of strategic planning
 Apply different tools of management
82. CU46 ICT Kol 8086 Microprocessor & Soumitra Kumar 08/08/2022 12/08/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
8051 Microcontroller Mandal Tech. of Engg. &  Describe Architecture and programming of 8086
Polytechnic in EE, Microprocessor & 8051 Microcontroller
ECE, EIE & Allied  Design interfacing circuits for Microprocessor & Microcontroller
Branch. based systems
 Develop Microprocessor & Microcontroller based projects
 Write assembly language programs

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

83. PS29 ICT Kol Role of Technical Sheela Yadav Rai 08/08/2022 12/08/2022 1 All Discipline After attending the programme the participants will be able to :
Institutions in  Know various Community Development Schemes
Community Development  Understand Feasibility Report
 Prepare Planning Report
 Make the Curricula
 Estimate the Training cost
84. SPL01 ICT Kol NEP 2020 Urmila Kar 08/08/2022 12/08/2022 1 Faculty from all
disciplines
85. PS32 Contact BBSR Field Practice on Basic Uday Chand 22/08/2022 26/08/2022 1 Laboraotry After attending the programme the participants will be able to
Surveying (Chain, Plane Kumar Instructor /  Explain basic concepts on basic surveying
Table, Compus, Technician /  Guide students in conducting different field based surveying.
Lavelling) Instrument will Assistant of Civil  Demonstrate different field practice on Surveying.
be supplied by the State Engg. and allied
Authorities. branches deptt.
86. PS30 ICT Kol Student Mentorship Habiba Hussain 22/08/2022 26/08/2022 1 Faculty from all After attending the programme, participants will be able to:
disciplines  Analyse role of teacher as a mentor
 Identify attributes of 21st century learners
 Facilitate learning using different mentorship styles
 Encourage growth mindset as a mentor
87. CU48 Contact Kol Advanced Digital Subrata 22/08/2022 26/08/2022 1 Faculty from After attending the course the participants will be able to
and Electronics Chattopadhyay Electrical,  Understand the operation and application of Combinational
ICT Electronics, circuits like
(both) Instrumentation o Decoder
and allied o Encoder
disciplines o Multiplexer
o Demultiplexer
 Understand the operation and application of Sequential circuits
like
o Flip-Flops
o Registers
o Counters
 Understand the operation of different digital devices
o A/D and D/A converter
o Digital Logic Families (TTL, ECL, DTL, CMOS)
o Programmable Logic Devices (ROM, PLA, PAL)

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

88. PS77 ICT Kol Thesis and Research Rayapati 22/08/2022 26/08/2022 1 Faculty of All At the end of the programme, the participants will be to:
Paper Writing Subbarao Discipline  Describe the steps involved in writing a thesis.
 Identify the scope of a thesis.
 Construe the results in a better way.
 Derive conclusions from the plots and contours made.
 Realize the ways of writing a research paper.
 Communicate a paper in their area of research.
89. PS31 ICT Kol NBA Accreditation and Arpan Kumar 22/08/2022 26/08/2022 1 Techical teachers After attending the course the participants will be able to
SAR Preparation for Mondal & Ranjan from all disciplines  Identify the Impact of NBA Accreditation
Engineering Colleges Dasgupta  Prepare Vision, Mission, PEO and PSO
 Prepare CO-PO mapping
 Learn how to prepare pre-qualifier and SAR.
 Practice Criteria 1 to 10
 Understand the washington accord
 Understand the essence of CEP and LLL
90. CU47 Contact BBSR Introduction to Indrajit Saha 29/08/2022 02/09/2022 1 All Discipline After attending the course the participants will be able to
Technology Enabled  describe the National policy regarding Technology in Education
Learning  apply the current Technology in online Education
 explain the ethical issues in Technology Enable Learning
91. PS33 ICT Kol Induction Training Urmila Kar 29/08/2022 09/09/2022 2 Faculty members After attending the programme, participants will be able to:
programme Phase II and technicians  Identify quality parameters in institutional development
from all technical  Illustrate the process of accreditation for technical institutes
institutes  Explain professional values and ethics of teachers
 Promote Technology Enable Learning (TEL)
 Identify Learning Style of students
 Identify style of teaching
 Explain the need for active learning for 21st century learners
 Plan instruction for active learning
 Decide assessment tools for active learning
92. CU50 ICT Kol Power Electronics Soumitra Kumar 05/09/2022 09/09/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Mandal Tech. of Engg. &  Study performance characteristics of Power Devices
Polytechnic in EE,  Describe operation & control of controlled converters
ECE, EIE & Allied  Applications of converters in Power System
Branch.
93. PS34 ICT Kol Power Generation from Sheela Yadav Rai 05/09/2022 09/09/2022 1 All Discipline After attending the programme the participants will be able to
Energy Resources  Understand potential sources of conventional energies for
power generation
 Describe potential sources of non-conventional energies for
power generation
 Understand environmental aspects of power generation
 Appreciate about various power projects

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

94. PS35 Contact BBSR Development of Dipankar Bose 05/09/2022 09/09/2022 1 Faculty members of After attending the programme, the participants will be able to
Laboratory Instruction all technical  classify various skills involved in laboratory practices
and Manual Institutions of  know various categories of laboratory experiments
Orissa  write laboratory instruction sheets
 Know evaluation techniques
95. CU51 Contact Kol Application of AutoCAD in Mithu Dey 12/09/2022 16/09/2022 1 Faculty and Staff of After attending the program, participants are expected to be able
Engineering & Basic all disciplines to
Sciences  Know the different commands of the Software
 Draw the 2D and 3DAppreciate the use of AutoCAD in Engg.
And Science
96. PS36 Contact Kol FDP on Curriculum Sukanta Kumar 12/09/2022 16/09/2022 1 Teachers, After attending the programme, participants will be able to:
Development Approaches Naskar Administrators  Follow the steps in developing / revising the curricula
 Appreciate different approaches in developing curricula
 Prepare a sample curricula
97. PS37 Contact BBSR Innovation and Startup in Prasanta Sarkar 12/09/2022 16/09/2022 1 Faculty of After attending the programme, the participants will be able to
Higher Education Engineering  Create awareness on Entrepreneurship development among
Institutions Disciplines students and faculty
 Promote entrepreneurship
 Provide support service fo incubation and startup
98. PS38 Contact Kol Wastewater Engineering Sailendra Nath 12/09/2022 23/09/2022 2 Faculty and Staff of After attending the programme the participants will be able to gain
Lab Mandal all disciplines and develop
1. knowledge of common wastewater parameters, methods of
testing techniques of wastewater and its importance
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test report,
providing laboratory instructions to develop inquiring attitude among
the student and evaluation of laboratory performance in related to
wastewater analysis laboratory,
3. attitude of hands-on-working in the laboratory/field(Plant Visit)
99. CU53 Contact Kol Sensors, Transducers Sagarika Pal 19/09/2022 23/09/2022 1 Faculty of Electrical, After completing the course the participants will be able to
and and Signal conditioning Mechanical, • Differentiate sensors, transducers and actuators
ICT Electronics & • Define & classify different sensors, transducers and actuators in
(both) Instrumentation industry
disciplines • Experiment with different types of sensors and actuators
• Explain the concept of Signal conditioning
 Apply signal conditioning for various transducers and actuators
100. PS39 ICT Kol NBA Accreditation Rayapati 19/09/2022 23/09/2022 1 Any faculty At the end of the programme, the participants will be to:
Subbarao  Identify the necessity of Accreditation.
 Prepare the requisite documents of Accreditation.
 Formulate COs and POs.
 Recognize the details of Criteria from i to x.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

101. PS40 Contact Guw Development of Subrata Mondal 19/09/2022 23/09/2022 1 Faculty of all After attending this programme, participants would be able to:
Laboratory Instruction disciplines and  explore the role of laboratory in student learning;
and Manual laboratory  explore development of laboratory exercise;
technicians  explore writing of laboratory report;
 explore standard operating procedure (SoP) in laboratory;
 explore safety aspects in laboratory instruction etc.
102. PS41 ICT Kol Evaluating Students’ Habiba Hussain 19/09/2022 30/09/2022 2 Faculty from all After attending the programme, participants will be able to:
Performance & Designing disciplines  Classify the types of evaluation
Question Papers  Identify essential parameters of OBA
 Analyse the outcomes of continuous assessment
 Develop tools for assessment
 Prepare ToS
 Draft question paper
103. CU54 ICT Kol Fundamentals of Machine Indrajit Saha 26/09/2022 30/09/2022 1 CSE, IT, BCA, MCA After attending the program, the participants will be able to
Learning and Deep ECE, EE, ME, CIVIL  describe the fundamentals of Machine Learning (ML)
Learning  apply ML for clustering, classification and regression
 explain machine learning in classroom
104. PS42 ICT Kol National Education Policy Urmila Kar 26/09/2022 30/09/2022 1 Faculty members, After attending the programme, participants will be able to:
(NEP) 2020 – Reforms in Technicians and  explain the guiding principles of NEP 2020.
Higher Education Administrators from  explain new vision for India’s higher education system.
all AICTE approved  explain the major reforms identified in NEP 2020.
institutes  identify the role of teachers of Higher Education Institutes
(HEIs) as revealed in NEP 2020.
105. CU55 ICT Kol MATLAB Applications in Soumitra Kumar 26/09/2022 30/09/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Engineering Mandal Tech. of Engg. &  Understand fundamentals of MATLAB
Polytechnic in EE,  Implement MATLAB Applications in Engineering
ECE, EIE & Allied  Explain the different aspect of MATLAB & Simulink
Branch.  Solve simple problem using MATLAB programming
 Develop simple model using Simulink
 Use MATLAB in analysis, design and simulation of Engineering
problems

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

106. CU56 ICT Kol Data Analytics with Kinsuk Giri & 10/10/2022 14/10/2022 1 All Discipline On successful completion of the programme the participants will
PYTHON Chandan be able to
Chakrabarty  Develop an understanding of basic concepts of Data science.
 Explore an ability to analyse data from a statistical perspective.
 Explain and implement Data Visualization Techniques.
 Demonstrate Classification and clustering processes.
 Get an exposure on basics of R statistical Programming and R
Studio.
 Create data analytical pipelines and applications in R statistical
programming.
 Develop familiarity with the R data science ecosystem for class
room teaching, practicing and project based learning.
107. PS43 Contact BBSR NBA Accreditation and Rayapati 10/10/2022 14/10/2022 1 Any faculty At the end of the programme, the participants will be to:
SAR Preparation Subbarao  Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational Objectives.
 Prepare Outcomes and Program Outcomes.
 Learn how to prepare SAR.
 Practice Criteria i to x.
108. CU57 ICT Kol Modelling, Analysis and Santanu Bhanja 17/10/2022 21/10/2022 1 Faculty of Civil, After attending the programme, the participants will be able to
Design of Buildings with Architecture & allied  Be acquainted with the basic methodology of software
a Versatile Structural disciplines application in structural analysis and design of RC buildings
Engineering Software  Apply latest IS codal provisions in analysis, design and detailing
like IS 456, 1893, 875, 13920 etc.
 Know the basic features of a universally accepted standard
software-ETABS
 Analyse, Design and Detail real life multi-storeyed buildings
109. PS44 ICT Kol Wastewater Treatment Sailendra Nath 17/10/2022 21/10/2022 1 Faculty and Staff of After attending the programme the participants will be able to acquire
Technology Mandal all disciplines 1. knowledge of wastewater contaminants, conventional and
advanced wastewater treatment stages, ZLD
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test report,
providing laboratory instructions to develop inquiring attitude among
the student and evaluation of laboratory performance in related to
wastewater treatment laboratory,
3. attitude of hands-on-working in the laboratory/field(Plant Visit).
110. CU58 ICT Kol Introduction to Image Indrajit Saha 17/10/2022 21/10/2022 1 CSE, IT, BCA, MCA After attending the program, the participants will be able to
Processing ECE, EE, ME, CIVIL  describe the fundamentals of image processing (IP) in MATLAB
 apply MATLAB commands to do IP
 (3) explain image processing in classroom

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

111. CU59 ICT Kol Network Infrastructure Rajeev Chatterjee 17/10/2022 21/10/2022 1 Faculty of CSE, IT After successful completion of the program, the participants will be
and Cloud Security & Ranjan Computer able to:
Dasgupta Application,  Explain the concept of Computer Network and Internetwork
Electronics,  Illustrate Principles of Security
discipline  Describe ISO27001: 2013
 Demonstrate Network infrastructure elements
 Explain Security Issues of Structure Cloud
 Explain the concept of network security
 Enlighten Application level security
112. CU60 ICT Kol Refresher Course on Sukanta Kumar 17/10/2022 21/10/2022 1 Teachers from After attending the programme, participants will be able to:
Product Design Naskar Engineering  Conceptualize the process of PD
background  Identify components of Product Design
 Practice few components of PD
113. PS45 ICT Kol Assessing Higher Urmila Kar 17/10/2022 21/10/2022 1 Faculty members, After attending the programme, participants will be able to:
Educational Institutes Technicians and  Develop the institutional management system as per review
(HEIs) Administrators from requirements.
all AICTE approved  Assess academic process based on review criteria.
institutes  Ensure academic contributions through human resource
development
 Explain the process for attaining autonomous status of the
institute based on guidelines of autonomy granting bodies
 Prepare the institute for external review
114. CU61 Contact BBSR Application of MATLAB Sagarika Pal 17/10/2022 21/10/2022 1 Faculty of Electrical, After completing the course the participant will be able to
Control System, Image Mechanical, • Use MATLAB commands
Processing and Fuzzy Electronics & • Apply Control System Tool Box Commands
Logic Tool box Instrumentation • Illustrate Simulink Modelling techniques
disciplines • Apply Image processing Tool Box Commands
• Apply Fuzzy Logic Tool Box
Create GUI using GUIDE
115. PS46 Contact Guw Induction Training Sheela Yadav Rai 17/10/2022 21/10/2022 1 All Discipline After attending the programme the participants will be able to
 Formulate the lesson plan
 Prepare the instructional objectives
 Identify the principles of evaluation
 Distinguish between types of evaluation
116. CU62 Contact Kol Applications of Machine Nirmal Kumar 17/10/2022 21/10/2022 1 All Disciplines After attending the programme the participants will be able to
Learning in Engineering Mandal  Explain supervised and unsupervised learning
 Apply Multinomial Logistic
 Perform regressions,
 Perform Monte Carlo Simulation (MCS)

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

117. CU63 ICT Kol 8085 and 8086 Soumitra Kumar 24/10/2022 28/10/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Microprocessor Mandal Tech. of Engg. &  Describe Architecture and programming of 8085 and 8086
Polytechnic in EE, Microprocessor
ECE, EIE & Allied  Design interfacing circuits for Microprocessor based systems
Branch.  Develop Microprocessor based projects
 Write assembly language programs
118. CU64 Contact Kol Mobile and Wireless Rajeev Chatterjee 31/10/2022 04/11/2022 1 Faculty of CSE, IT After successful completion of the program, the participants will be
Network Computer able to
Application,  Explain the basic concept of mobile and wireless network
Electronics,  Design of Enterprise Wireless LAN
discipline  Explain Mobile IP Network
 Explain IdAM system
119. SPL06 ICT Kol Assessment, Evaluation Sagarika Pal 01/11/2022 03/11/2022 3 Faculty of All
and Preparing Question day Discipline
Papers s
120. PS47 ICT Kol Values and Ethics for Mithu Dey 07/11/2022 11/11/2022 1 Faculty and Staff of After attending the program, participants are expected to be able
Professional all disciplines to
 Explain the concept of Professional Values, Ethics and Attitude
 Identify issues and challenges in ethical practice
 Identify the ways and means for ensuring ethical behaviour by
teachers
 Practice the roles of ‘Technical Teachers as Professionals’ in
establishing the; Guru-Shisya Parampara’ in present context
 Describe the roles of technical teachers in sustainibility
development
121. CU65 Contact Kol Topics in Algorithm Samir Roy & 07/11/2022 11/11/2022 1 Faculty of CSE, IT, After successful completion of the program, the participants will
Ranjan Dasgupta MCA disciplines be able to
 Explain the fundamental concepts of analysis of algorithms
 Identify different approaches to deal with computational
problems
122. CU66 ICT Kol Solar Photovoltaic Soumitra Kumar 07/11/2022 11/11/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Mandal Tech. of Engg. &  Describe the principles of Solar Cell
Polytechnic in EE,  Identify the various parameters of Solar PV system
ECE, EIE & Allied  Develop an in-depth knowledge about Solar PV Module by
Branch. performing basic experiments & through field visit
 Modelling of Solar PV system
 Operation and Control of Solar PV system
 Understand fundamentals of Smart grid

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

123. MGT08 Contact Guw Management Issues of Dipankar Bose 07/11/2022 11/11/2022 1 Faculty members of After attending the programme the participants will be able to
Labrotary and Workshop all technical  know various management issues of conducting laboratory and
Classes Institutions of workshop classes
N.E.Region  understand the effective techniques of management of
classroom, machines/equipment and manpower
 state different safety aspects
124. CU67 ICT Kol Institutional Management Uday Chand 14/11/2022 18/11/2022 1 Faculty and Staff of After attending the programme the participants will be able to
Kumar all Disciplines  Explore Management principles and its applications
 Identify quality parameters in institutional development
 Able to identify management Tools.
 Problem Solving and Decisions Making Skills.

125. PS48 ICT Kol Solid and Hazardous Sailendra Nath 14/11/2022 18/11/2022 1 Faculty and Staff of After attending the programme the participants will be able to acquire
Waste Management Mandal all disciplines 1. knowledge of solid waste: types, effect, solid and hazardous waste
management concept, characterization of solid waste
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test report,
providing laboratory instructions to develop inquiring attitude among
the student and evaluation of laboratory performance in related to
solid waste characterization laboratory,
3. attitude of hands-on-working in the laboratory/field (Plant visit)
126. PS49 ICT Kol Induction Training Sheela Yadav Rai 14/11/2022 18/11/2022 1 All Discipline After attending the programme the participants will be able to
 Formulate the lesson plan
 Prepare the instructional objectives
 Identify the principles of evaluation
 Distinguish between types of evaluation
127. CU68 ICT Kol Artificial Intelligence for Chandan 14/11/2022 25/11/2022 2 Faculty of After attending the course, the participants would be able to
Biomedical Engineering Chakraborty Engineering &  Develop an understanding of fundamentals of Artificial
Science, Allied Intelligence.
disciplines  Explain and implement Data Visualization Techniques.
 Demonstrate Machine Learning techniques.
 Application of AI in Digital Medical Data.
 Explore the various case studies in Biomedical Engineering
 Demonstrate Computer Aided Diagnosis using Medical Images

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

128. PS50 ICT Kol Introduction to Advanced Indrajit Saha, 14/11/2022 25/11/2022 2 Techical teachers After attending the program, the participants will be able to
Pedagogy Sagarika Pal, from all disciplines  Explain the need of Advanced Pedagogy
Kinsuk Giri &  Understand the fundamental strategies of hybrid pedagogy
Arpan Kumar  Explain different Advanced Pedagogy Approaches
Mondal  Understand the principles of Blended Learning approaches
 Apply Technology Enable Learning techniques
 Study Flipped Teaching and Learning
 Analyse Design Thinking in Pedagogy
 Understand Education 4.0
 Develop Rubrics for Assessment in Advanced Pedagogy
 Plan instruction
 Incorporate different principles for effective delivery
129. PS51 ICT Kol Soft Skills for Teachers Habiba Hussain 21/11/2022 25/11/2022 1 Faculty from all After attending the programme, participants will be able to:
disciplines  Distingush between hard & soft skills
 Identify essential soft skills for teachers
 Categorise instructional strategies to encourage soft skills
development in learners
 Relate soft skills to 21st century learning effectiveness
130. CU69 Contact Kol Bio-Medical Engineering Subrata 21/11/2022 25/11/2022 1 Faculty from After attending the course the participants will be able to
and Chattopadhyay Electrical,  Understand Cells, Digestive System, Excretory System,
ICT Mechanical, Endocrinology
(both) Electronics,  Describe Origins of electro-physiological signal and their
Instrumentation characteristics
and allied  Design practical clinical sensors and transducers
disciplines  Understand the ECG, EEG, EMG and their Electrodes
 Understand the operation of X-ray, Fluoroscopy and
Radiography, Pacemaker, Magnetic Resonance Imaging etc.
 Explain Electric shock hazards and safety devices
131. PS78 ICT Kol Thesis and Research Rayapati 21/11/2022 25/11/2022 1 Faculty of All At the end of the programme, the participants will be to:
Paper Writing Subbarao Discipline  Describe the steps involved in writing a thesis.
 Identify the scope of a thesis.
 Construe the results in a better way.
 Derive conclusions from the plots and contours made.
 Realize the ways of writing a research paper.
 Communicate a paper in their area of research.
132. MGT09 ICT Kol Institutional Management Sukanta Kumar 21/11/2022 25/11/2022 1 Principals/ DTEs After attending the course the participants will be able to
and Administrative Naskar Officials.  Contribute effectively for developing the institute
Procedures  Identify components of institutional management
 appreciate administrative procedures
 Contribute administrative activities effectively

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

133. CU71 Contact Kol Mechanical Workshop Arpan Kumar 28/11/2022 09/12/2022 2 Techical Teachers After attending the programme the participants will be able to
Practice Mondal and Staff from  Classify various components of mechanical workshop.
Mechanical  Understand the principles of various metal working processes.
Engineering and  Practice on welding, forming, machine tools, CNC, mechanical
allied disciplines testing etc
134. CU72 Contact BBSR Philosophy of Limit State Santanu Bhanja 28/11/2022 02/12/2022 Faculty of Civil, After attending the programme, the participants will be able to
Method of RC Design as Architecture & allied  Be acquainted with the fundamentals of Limit State Method of
per Indian Standards disciplines Design as per Indian Standards IS 456-2000 and IS 13920-
with Introduction to 2016 highlighting the design philosophy of prescriptive method
Performance Based of design
Design  Be introduced to Performance based seismic design
 Be acquainted with the shortcomings of the standards in
dealing with high grades of concrete and identify the grades of
steel that are suitable for seismic design
 Be introduced to overall design philosophy rather than
mechanically using some design aids or charts
 Analyze, Design and Detail foundations for real life multistoried
buildings using the basic features of different software
135. PS52 Contact Kol ICT Enabled Learning in Rajeev 28/11/2022 02/12/2022 1 Faculty of all After successful completion of the program, the participants will
21st Century Chatterjee, Samir disciplines be able to
Roy & Ranjan  Explain the changing scenario of education in 21st century
Dasgupta  Explain the concept of e-learning / TEL
 Exhibit and demonstrate the process of e-content creation for
MOOCs based e-content
 Demonstrate ethics, plagiarism, etc. in 21st century
 Explain lifelong learning
 Explain the development of virtual Laboratory
136. PS53 Contact Kol Active Learning under Urmila Kar 28/11/2022 02/12/2022 1 Faculty members After attending the programme, participants will be able to:
Engineering Education and technicians  identify features of learning-teaching system under engineering
from all technical education
institutes  explain the need for active learning
 analyse the learning styles of engineering students
 identify innovative approaches for active learning
 illustrate the features of Problem Based Learning and Project
Based Learning
 identify the way to incorporate active learning and life-long
learning into engineering curricula

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

137. CU73 Contact Kol Object Oriented Design & Rajeev Chatterjee 05/12/2022 09/12/2022 1 Faculty of CSE, IT After successful completion of the program, the participants will
Programming in C++ & Samir Roy Computer be able to
Application,  Create an Object-Oriented Model of a software,
Electronics,  Use of UML for Software Design
Electrical,  Write a Program in C++ to solve a computational problem
Mathematics  Compile, debug and execute a program in C++
disciplines  Apply objects, classes, inheritance, polymorphism etc. to
implement object oriented programming.
138. CU74 Contact Kol Industrial Process Control Sagarika Pal 05/12/2022 09/12/2022 1 Faculty of Electrical, After completing the course the participant will be able to
and Mechanical,  Explain Conventional control techniques for industrial
ICT Electronics & automation
(both) Instrumentation  Describe complex controls such as ratio, cascade, feed forward
disciplines etc.
 Develop programme on PLC and DCS for process automation
 Explain SCADA systems for various process control systems
139. PS54 Contact Kol Development of Dipankar Bose 05/12/2022 16/12/2022 2 Faculty members After attending the programme, the participants will be able to
Laboratory Instruction and Technical Staff  classify various skills involved in laboratory practices of
and Manual for Members of Mechanical Engineering
Mechanical Engineering Technical  know various categories of laboratory experiments Mechanical
Institutions with Engineering
Mechanical  hands on practice
Engineering  write laboratory instruction sheets
Specialization  Know evaluation techniques
140. CU75 Contact Kol Laboratory Practice on Uday Chand 12/12/2022 16/12/2022 1 Laboraotry After attending the programme the participants will be able to
Bitumen Kumar Instructor /  Explain basic concepts on laboratory tests of Bitumen
Technician /  Guide students in conducting different laboratory experiments
Assistant of Civil for determination of various parameters.
Engg. and allied  Demonstrate different tests on Bitumen
branches deptt.
141. CU76 ICT Kol Introduction to Indrajit Saha 12/12/2022 16/12/2022 1 CSE, IT, BCA, MCA After attending the program, the participants will be able to
Computational ECE, EE, ME, CIVIL  describe the fundamentals of Computational Intelligence (CI)
Intelligence  apply CI for complex computational problem
 explain computational intelligence in classroom

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

142. PS55 Contact BBSR Choice Based Credit Chandan 12/12/2022 16/12/2022 1 Faculty of all On successful completion of the course the participant will be
System (CBCS) and Chakraborty disciplines able to
Student’s Performance  Understand the importance and structure of Choice Based
Evaluation Credit System (CBCS) in Technical Education.
 Explore the meaning of Core, Discipline Specific Elective, Skill
and Ability Enhancement Core Courses.
 Develop an understanding of various assessment & evaluation
methods,
 Design and practice of Rubrics for student’s performance
evaluation
143. PS56 ICT Kol Developing Research Habiba Hussain 12/12/2022 16/12/2022 1 Faculty from all After attending the program, the participants will be able to
Presentations disciplines  Characterise oral and written research presentations
 Identify steps involved in preparing a research paper
 Summarise results
144. CU77 ICT Kol Electricity Rules and Prasanta Sarkar 12/12/2022 16/12/2022 1 Faculty and After attending the programme, the participants will be able to
Code of Practices Technical Staff of all  Familiarize with Indian Electricity Act and National Electric Code
Disciplines  Understand fundamental principles for electrical installation
 Design electrical installation
 Enforce safety in electrical work
145. CU78 ICT Kol PLC and LABVIEW Soumitra Kumar 12/12/2022 16/12/2022 1 Faculty and Lab. After attending the programme, the participants will be able to
Mandal Tech. of Engg. &  Describe the architecture of PLC
Polytechnic in EE,  Develop PLC Programs
ECE, EIE & Allied  Apply PLC in Industrial Automation
Branch.  Understand fundamentals of LABVIEW
 Implement LABVIEW Applications
146. PS57 ICT Kol Community Development Sheela Yadav Rai 12/12/2022 16/12/2022 1 All Discipline After attending the programme the participants will be able to :
through Technical  Know various Community Development Schemes
Institutes  Understand Feasibility Report
 Prepare Reports
 Make linkages with organisations
147. CU79 Contact Kol Fundamental and Subrata Mondal 12/12/2022 23/12/2022 2 Faculty of all After attending this program, participants would be able to:
Applications of disciplines  explore the concept of nanotechnology;
Nanomaterials  describe the fundamental of nanoscale materials’ properties;
 identify various carbon based nanomaterials;
 describe applications of nanomaterials in various fields;
 explain the nano toxicology and nano safety etc.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

148. PS58 Contact Kol Academic Writing and Rayapati 12/12/2022 2 All Discipline At the end of the programme, the participants will be to:
Tools Subbarao, Kinsuk 23/12/2022  Identify the different ways of presenting an academic report.
Giri & Samir Roy  Detail the steps involved in writing a research article.
 Obtain the skills of writing a thesis or research report.
 Learn the ways of using different tools for writing a thesis.
 Apply different tools for academic purposes.
149. CU80 ICT Kol Analysis and Design of Mithu Dey 19/12/2022 23/12/2022 1 Civil engg and allied After attending the program, participants are expected to be able
Structures by Limit State braches to
Method using Software.  Appreciate the importance of the Limit State Method.
 Compare with Working Stress Method.
 Understand the different methods of structural analysis
 Design the different structural elements (RCC & Steels
structures) by Limit State Method.
 Use of software to drawing analysis and design the different
Structural elements
150. MGT10 Contact Guw FDP on Essentials of HRM Sukanta Kumar 19/12/2022 23/12/2022 1 Teachers, After attending the programme, participants will be able to:
Naskar Administrators and  Identify the components of HRM
Support Staff  Practice the components of HRM in their respective
organization
151. PS59 ICT Kol Designing Direct and Urmila Kar 19/12/2022 23/12/2022 1 Faculty members After attending the programme, participants will be able to:
Indirect Assessment and technicians  explain the need for assessment of learning
Tools from all technical  distinguish between measurement, assessment and evaluation
institutes. of student learning
 decide assessment strategies based on types and purposes of
Assessment and Evaluation
 differentiate between direct and indirect assessment tools
 decide techniques for assessment of learning outcomes in
different domains
 design appropriate tools for learning assessment
 designing question paper
 designing tools for skill assessment
 designing rubrics for assessment
 designing tools for indirect assessment
 Validate assessment tools
152. CU81 Contact Kol TIG/MIG and Plasma Arpan Kumar 19/12/2022 30/12/2022 2 Techical teachers After attending the programme the participants will be able to
Welding Processes and Mondal and staff from  Explain the principles of advanced welding processes.
Testing Mechanical  Perform independently various advanced welding processes: TIG,
Engineering and MIG, Pulsed TIG, Medium and Soft Plasma Arc Welding
allied disciplines  Understand the physics of welding
 Perform the various advanced welding processes
 Perform varios testing of welds

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

153. CU82 Contact Guw PLC Programming and its Sagarika Pal 19/12/2022 23/12/2022 1 Faculty of Electrical, After completing the course the participant will be able to
Applications Mechanical, • Explain working principle of PLC
Electronics & • Describe architecture of PLC system
Instrumentation • Develop PLC programmes
disciplines • Apply PLC in various system automation
154. CU83 ICT Kol Course on Commentary Santanu Bhanja 26/12/2022 30/12/2022 1 Faculty of Civil, After attending the programme, the participants will be able to
for Code on Ductility Architecture & allied  Understand the fundamental principles of RC design as per
Design and Detailing of disciplines Indian Standards - the fundamentals of Limit State Method and
RC structures subjected need for ductility design
to Seismic Forces - IS  Interpret some of the important clauses of the code in their
13920 2016 true letter and spirit
 Implement the codal clauses in a better manner for design and
detailing of Earthquake Resistant Structures
 Identify the major design and detailing considerations
 Apply a standard software for designing structures
155. PS60 Contact BBSR Environmental Pollution Sailendra Nath 26/12/2022 30/12/2022 1 Faculty and Staff of After attending the programme the participants will be able to acquire
and Control Mandal all disciplines 1. knowledge of air pollution, water pollution, noise pollution,
parameters, standards, effects
2. skill of handling equipment, performing experiments, interpreting
results, preparing test report, providing laboratory instructions to
develop inquiring attitude among the student and evaluation of
laboratory performance in related to environmental pollution
laboratory,
3. attitude of hands-on-working in the laboratory/field (Plant visit)
156. CU84 Contact Kol Applied Chemistry Lab Sailendra Nath 09/01/2023 13/01/2023 1 Faculty and Staff of After attending the programme the participants will be able to acquire
Mandal chemistry 1. knowledge of major applied chemistry experiment and practical
significance of each experiment.
2. skill of handling conventional and advanced equipment,
performing experiments, interpreting results, preparing test report,
providing laboratory instructions to develop inquiring attitude among
the student and evaluation of laboratory performance in related to
applied chemistry laboratory,
3. attitude of hands-on-working in the laboratory/field (Plant Visit)
157. PS61 Contact Guw Quality Assurance Urmila Kar 09/01/2023 13/01/2023 1 Faculty members After attending the programme, participants will be able to:
through Accreditation and technicians  identify quality issues of Technical Education System
(NBA Guidelines) from all technical  explain the need for and features of Outcome Based Education
institutes (OBE)
 justify the requirement of Outcome Based Accreditation (OBA)
 identify parameters for OBA
 explain the process of preparing self-assessment report (SAR)
for Accreditation by NBA

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

158. CU85 Contact Kol Non Traditional Dipankar Bose 09/01/2023 13/01/2023 1 Faculty members of After attending the programme the participants will be able to
Machining Processes Technical  explain various types of non-traditional machining processes
Institutions with  understand working principles of different non-traditional
ME, Production machining processes
,Automobile  hands on practices on various non-traditional machining
Engineering processes
Specialization
159. CU86 ICT Kol Applications of LABVIEW Soumitra Kumar 09/01/2023 13/01/2023 1 Faculty and Lab. After attending the programme, the participants will be able to
& MATLAB in Engineering Mandal Tech. of Engg. &  Understand fundamentals of LABVIEW
Polytechnic in EE,  Implement LABVIEW Applications in Engineering
ECE, EIE & Allied  Explain the different aspect of MATLAB & Simulink
Branch.  Solve simple problem using MATLAB programming
 Develop simple model using Simulink
 Use MATLAB in analysis, design and simulation of Engineering
problems
160. CU87 Contact Kol Mathematical Foundation Kinsuk Giri & 09/01/2023 20/01/2023 2 All Discipline On successful completion of the programme the participants will
of Computer Science Samir Roy be able to
 able to explain mathematical/logical foundation of
computations
 model computational tasks in terms of mathematical formalism
 apply appropriate mathematical tools to solve computational
problem
161. CU88 Contact Kol Analysis and Design of Santanu Bhanja 16/01/2023 20/01/2023 1 Faculty of Civil, After attending the programme, the participants will be able to
Structures using latest Architecture & allied  Understand the role of software in structural analysis and
version of a Structural disciplines design
Engineering Software  Know the basic features of a universally accepted software-
STAAD.Pro Connect- latest version along with RCDC
 Apply IS Codal provisions in analysis, design and detailing - IS
456, 1893, 875, 13920 etc.
 Analyse, design and detail real-life multi- storeyed buildings,
civil engineering structures
 Analyse and design foundations
162. PS62 Contact Kol Laboratory practices on Mithu Dey 16/01/2023 20/01/2023 1 Civil engg and allied After attending the program, participants are expected to be able
Civil Engineering braches to
Materials (Concrete and  Develop Skill & Knowledge on the fundamentals involved in
Road Material) testing of various ingredients of Civil Engg. Materials.
 Familiar with the use of NDT equipments
163. CU89 Contact Kol Fundamentals of Image Indrajit Saha 16/01/2023 20/01/2023 1 All Discipline After attending the program, the participants will be able to
Editing and 2D Animation  edit images and create animation
 get exposure in various multimedia related software
 prepare a small computer based training material

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

164. PS63 Contact BBSR Induction Training Habiba Hussain 16/01/2023 20/01/2023 1 Faculty from all After attending the programme, participants will be able to:
disciplines  Distinguish the different roles of a teacher
 Identify essential teaching skill components
 Plan instruction using different strategies
 Integrate media and/or technology in teaching
 Assess learning
165. CU90 Contact Guw Modern Industrial Control Subrata 16/01/2023 20/01/2023 1 Faculty from After attending the course the participants will be able to
Syastem Chattopadhyay Electrical,  Familiar with closed loop control system
Mechanical,  Understand the pressure, Temperature, Flow & Level
Electronics, Measurement system
Instrumentation  Know hazardous area classification
and allied  Utilize the electrical instruments in hazardous area in process
disciplines plant
 Design the conventional complex control system like ratio,
cascade, feed forward, selective, override etc
 Apply the control system in distillation column in industry
 Know the fundamental of PLC, DCS and SCADA
166. PS64 Contact Kol Estimating and Costing of Sheela Yadav Rai 16/01/2023 20/01/2023 1 All Discipline After attending the programme the participants will be able to :
Non-  Describe various type of Non-conventional Energies Sources
conventional Energies  Understand the scope of Solar energy, Solar Thermal
Conversion, Solar Collector, Wind Energy
 Estimating & costing of various energies
167. PS65 ICT Kol Advanced Pedagogy Sukanta Kumar 16/01/2023 27/01/2023 2 Techical teachers After attending the program, the participants will be able to
Naskar & Arpan from all disciplines  Explain the need of Advanced Pedagogy
Kumar Mondal  Understand the fundamental strategies of advanced pedagogy
techniques
 Explain different Advanced Pedagogy Approaches
 Plan instruction
 Incorporate different principles for effective delivery and
assessment
168. SPL04 ICT Kol Ecology and Uday Chand 16/01/2023 20/01/2023 1 Faculty and Staff After attending the program, the participants will be able to
Environmental Studies Kumar from all disciplines  Define the Ecology
 Describe the different causes of air, water and soil pollution
 Explain the low cost sanitation
 Describe the solid waste management.

169. CU91 Contact BBSR Applied Optimization of Nirmal Kumar 23/01/2023 27/01/2023 1 All Disciplines After attending the programme the participants will be able to
Engineering Systems with Mandal  Model a physical system
MATLAB  Explain linear and nonlinear regression
 Optimise a function using GA, PSO

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

170. PS66 Contact Kol Thesis and Research Rayapati 23/01/2023 27/01/2023 1 Any faculty At the end of the programme, the participants will be to:
paper writing Subbarao  Identify stages in thesis writing.
 Discuss the results in a refined way.
 Learn the ways of writing and communicating a research
paper.
171. PS67 Contact Guw NBA Accreditation and Arpan Kumar 30/01/2023 03/02/2023 1 Techical teachers After attending the course the participants will be able to
SAR Preparation for Mondal & Ranjan from all disciplines  Identify the Impact of NBA Accreditation
Polytecnics Dasgupta  Prepare Vision, Mission, PEO and PSO
 Prepare CO-PO mapping
 Learn how to prepare pre-qualifier and SAR.
 Practice Criteria 1 to 10
 Understand the washington accord
172. SPL07 ICT Kol Rethinking Curricullam in Habiba Hussain 01/02/2023 03/02/2023 3 Faculty of all After attending the course the participants will be able to
line with NEP 2022 day disciplines  analyse the intricacies in curricular structure in
s technical education
 reflect upon the existing pedagogical practices
 integrate components for creating a holistic learning
culture

173. PS68 Contact BBSR Renewable Energy Sheela Yadav Rai 06/02/2023 10/02/2023 1 All Discipline After attending the programme the participants will be able to:
Sources and Emerging  Understand Energy Sources and their utilization
Technologies  Explain Environmental aspects of electric energies generation
 Understand the scope of Solar Thermal Conversion and Solar
Photovoltaic system
 Describe about wind energy, Geothermal energy and Biomass
 Apply Non-conventional energies through various agencies
 viz. WBREDA
174. PS69 Contact Guw NBA Accreditation and Rayapati 06/02/2023 10/02/2023 1 All Discipline At the end of the programme, the participants will be to:
SAR Preparation Subbarao  Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational Objectives.
 List out Course and Program Outcomes.
 Learn how to prepare SAR.
 Practice Criteria i to x.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

175. MGT11 Contact Guw Research Methodology Chandan 06/02/2023 10/02/2023 1 Faculty of all After completion of this course the participants will be competent
Chakraborty disciplines enough to
 Develop understanding of the research design, interdisciplinary
research in the line of NEP 2020.
 Explore about systematic literature review with meta-analysis,
PRISMA
 Gain knowledge in data analytics using statistical methods
 Hands-on-training with Excel and SPSS for data analysis.
 Paper writing, thesis reporting etc.
176. CU92 ICT Kol Machine Learning with Kinsuk Giri & 13/02/2023 17/02/2023 1 All Discipline On successful completion of the programme the participants will
PYTHON Chandan be will be accomplished with
Chakrabarty  The notion of Machine Learning and its impact on future
employment
 Overview of Python programming
 Exposure of supervised and unsupervised ML techniques
 Hands-on-practice of ML algorithms implementation using
Python
 Explore for problem solving
177. CU93 Contact Kol LABVIEW Application in Sagarika Pal 13/02/2023 17/02/2023 1 Faculty of Electrical, After completing the course the participant will be able to
and Engineering Mechanical, • Explain features of LABVIEW
ICT Electronics & • Create VI files
(both) Instrumentation • Apply VI files in various fields
disciplines • Apply Data Acquisition System in LABVIEW
178. PS70 Contact Guw Innovation and Startup in Prasanta Sarkar 13/02/2023 17/02/2023 1 Faculty of all After attending the programme, the participants will be able to
Higher Education Disciplines  Create awareness on Entrepreneurship
Institutions  development among students and faculty
 Promote entrepreneurship
 Provide support service fo incubation and startup
179. CU94 Contact Kol Application of AutoCAD in Mithu Dey 20/02/2023 24/02/2023 1 Faculty and Staff of After attending the program, participants are expected to be able
Engineering & Basic all disciplines to
Sciences  Know the different commands of the Software
 Draw the 2D and 3DAppreciate the use of AutoCAD in Engg.
And Science

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

180. CU95 Contact BBSR Analysis and Design of Santanu Bhanja 20/02/2023 24/02/2023 1 Faculty of Civil, After attending the programme, the participants will be able to
structures using a Architecture & allied  Understand the role of software in structural analysis and
powerful Structural disciplines design
Engineering Software  Know the basic features of a universally accepted software-
STAAD.Pro Connect- latest version along with RCDC
 Apply IS Codal provisions in analysis, design and detailing - IS
456, 1893, 875, 13920 etc.
 Analyse, design and detail real-life multi- storeyed buildings,
civil engineering structures
 Analyse and design foundations
181. CU96 ICT Guw Fundamentals of Indrajit Saha 20/02/2023 24/02/2023 1 All Discipline After attending the course the participants will be able to
Technology Enabled  describe the National policy regarding Technology in Education
Learning  apply the current Technology in online Education
 explain the ethical issues in Technology Enable Learning
182. PS71 ICT Kol FDP on Lifeskill D. P. Mishra & 20/02/2023 24/02/2023 1 Teachers,
Development Sukanta Kumar Technician and
Naskar Administrator
183. PS72 Contact BBSR NBA Accreditation and Arpan Kumar 27/02/2023 03/03/2023 1 Techical teachers After attending the course the participants will be able to
SAR Preparation for Mondal & Ranjan from all disciplines  Identify the Impact of NBA Accreditation
Polytecnics and Dasgupta  Prepare Vision, Mission, PEO and PSO
Engineering Colleges  Prepare CO-PO mapping
 Learn how to prepare pre-qualifier and SAR.
 Practice Criteria 1 to 10
 Understand the washington accord
 Understand the esence of CEP and LLL
184. CU97 Contact Guw Engineering Optimization Kinsuk Giri 06/03/2023 10/03/2023 1 All Discipline On successful completion of the programme the participants will
be able to
 get exposure in Optimization
 describe the fundamentals of Optimization techniques
 apply tools for problem solving in Optimization
185. PS73 Contact BBSR National Education Policy Urmila Kar 06/03/2023 10/03/2023 1 Faculty members After attending the programme, participants will be able to:
(NEP) 2020 – Reforms in and technicians  explain the guiding principles of NEP 2020.
Higher Education from all AICTE  explain new vision for India’s higher education system.
approved Institutes  explain the major reforms identified in NEP 2020.
 identify the role of teachers of Higher Education Institutes
(HEIs) as revealed in NEP 2020.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

186. CU98 Contact Kol Refresher course on Sagarika Pal 06/03/2023 10/03/2023 1 Faculty of Electrical, After completing the course the participant will be able to
and MATLAB & LABVIEW Mechanical, • Use MATLAB commands, SIMULINK, Control system tool Box
ICT Applications Electronics & • Develop GUI files for interraction with MATLAB Toolbox
(both) Instrumentation • Explain features of LABVIEW
disciplines • Create VI files
• Apply VI files in various fields
• Apply Data Acquisition System in LABVIEW
187. PS79 ICT Kol NBA Accreditation with Rayapati 06/03/2023 10/03/2023 1 Faculty of All At the end of the programme, the participants will be to:
Document Preparation Subbarao Discipline  Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational Objectives.
 Prepare Outcomes and Program Outcomes.
 Learn how to prepare SAR.
 Practice Criteria i to x.
188. CU100 ICT Kol Vibration and Its Effects Nirmal Kumar 06/03/2023 10/03/2023 1 Faculty of After attending the course, the participants will be able to
on Engineering Systems Mandal & Engineering with  Understand different types of vibrations
Santanu Bhanja preference  Understand the importance of vibration analysis in Mechanical
to Mechanical, Civil and Civil Engineering
, Architecture &  Understand the application of vibration analysis in design of
allied disciplines machines
 Identify the major design and detailing considerations of
structures subjected to vibrations
189. CU101 Contact Kol Teaching – Learning Subrata 13/03/2023 17/03/2023 Faculty from any After attending the course the participants will be able to
and Process using Chattopadhyay & disciplines  Understand the utility of instructional media
ICT Instructional Media Sagarika Pal  Know the types of instructional media and its advantages
(both)  Familiar with the computer to be used as instructional media
and its advantages and limitations
 Understand the courseware
 Classify the Different types of courseware
 Application of Computer assisted instruction
 Know the feathers of CAI
 Explanation of different types of CAI
 A model class with CAI
190. PS74 Contact Guw Induction Training Habiba Hussain 13/03/2023 17/03/2023 1 Faculty from all After attending the programme, participants will be able to:
disciplines  Distinguish the different roles of a teacher
 Identify essential teaching skill components
 Plan instruction using different strategies
 Integrate media and/or technology in teaching
 Assess learning

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
 Programme Calendar 2022-23
Application Form Link: http://www.nitttrkol.ac.in/download/Application%20Form.pdf
Application Google Form Link: https://forms.gle/dzfpvkUD78zakW7Y8

Sl. Prog. Mode Venue Programme Title Programme Co- Date Target Participant / Programme Objectives

Week
No. Code ordinator (s) From To Group

191. PS75 Contact BBSR Waste Water Treatment: Subrata Mondal 13/03/2023 17/03/2023 1 Faculty of Chemical After attending this program, participants would be able to:
Pollution Control and Engg.  explore the characteristics of various industrials wastewater;
Reuse Environmental  describe the wastewater treatment using low cost adsorbents
Engg., Science, and nano sized adsorbents;
Textiles Engg., and  describe the wastewater treatment using membrane
allied disciplines technology etc.
 explain the characterizations of wastewater;
192. CU52 Contact Kol Laboratory Practice on Uday Chand 13/03/2023 17/03/2023 1 Laboraotry After attending the programme the participants will be able to
Coarse Aggregate and Kumar Instructor /  Explain basic concepts on laboratory tests of Aggregates
Fine Aggregate Technician /  Guide students in conducting different laboratory
Assistant of Civil experiments for determination of various parameters.
Engg. and allied  Demonstrate different tests on aggregates.
branches deptt.
193. PS76 ICT Kol Problem-Based Learning- Indrajit Saha, 20/03/2023 24/03/2023 1 Techical teachers After attending the course the participants will be able to
Towards Advanced Sagarika Pal, from all disciplines  Explain the basic problem solving strategies in classroom
Pedagogy Kinsuk Giri &  Identify specific problems covering a particular area of learning
Arpan Kumar  Solve problems in various branches of Engineering through PBL
Mondal  Analyse the benefits associated with PBL compared to
conventional learning
194. CU103 Contact BBSR Formal Languages and Samir Roy 27/03/2023 31/03/2023 1 Techniical teachers After successful completion the course the participant will be able
Automata from all disciplines to
 Apply the principles & techniques of Formal Languages and
Automata in computational systems.
 Implement Formal languages and Automata in software design.
 Explain the concepts of Formal Languages and Automata in
classroom
195. CU104 ICT Kol ICT Tools for Effective Kinsuk Giri & 27/03/2023 31/03/2023 1 Techical teachers After going through this program the participants will be able to:
Teaching and Learning Arpan Kumar and staff from all  Explain the need for online pedagogy
Mondal disciplines  Plan online instruction
 Explain the concept of online Mode of teaching-learning,
 Understand the use of various ICT tools,
 Apply different online tools for ICT based teaching learning
 Apply different online tools for online assessment
 Incorporate different principles for effective online delivery

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Office Line, ICT – Online
Venue: Kol – Kolkata Main Centre, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.