Tel: (86) 769 8282 7329 E-mail: [email protected] Skype: topdiode Website: www.topdiode.

com

M1- M7
1.0 AMP. Surface Mount Rectifiers
SMA/DO-214AC

Features

For surface mounted application

Glass passivated junction chip.

Low forward voltage drop

High current capability

Easy pick and place

High surge current capability

Plastic material used carries Underwriters
Laboratory Classification 94V-0

High temperature soldering:
o
260 C / 10 seconds at terminals

High reliability grade (AEC Q101 qualified)

Mechanical Data

Case: Molded plastic

Terminals: Pure tin plated, lead free Dimensions in inches and (millimeters)
solderable per J-STD-002B and
JESD22-B102D.

Polarity: Indicated by cathode band

Packaging: 12mm tape per EIA STD RS-481

W eight: 0.064 gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol M1 M2 M3 M4 M5 M6 M7 Units
Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current @T L =110 oC I(AV) 1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated IFSM 40 30 A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage VF 1.1 V
@ 1.0A
Maximum DC Reverse Current @ T A =25 oC IR 5.0 uA
at Rated DC Blocking Voltage @ T A =125 oC 50 uA
Typical Reverse Recovery Time (Note 1) Trr 1.5 uS
Typical Junction Capacitance ( Note 2 ) Cj 12 pF
Non-Repetitive Peak Reverse Avalanche
E AS 5 mJ
Engergy at 25 oC, IAS =1A, L=10mH
Typical Thermal Resistance (Note 3) R θJL 27 30
o
R θJA 75 85 C/W
o
Operating Temperature Range TJ -55 to +150 C
o
Storage Temperature Range T STG -55 to +150 C
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR =1.0A, I RR =0.25A
2. Measured at 1 MHz and Applied V R =4.0 Volts
3. Measured on P.C. Board with 0.2” x 0.2” (5.0mm x 5.0mm) Copper Pad Areas.

Note: Specification is subject to change without further notice. For more details and updates, please visit our website.
 DAYA

Tel: (86) 769 8282 7329 E-mail: [email protected] Skype: topdiode Website: www.topdiode.com

RATINGSANDCHARACTERISTICCURVES(M1 THRU M7)

FIG.1- MAXIMUM FORWARD CURRENT DERATING FIG.2- TYPICAL REVERSE CHARACTERISTICS
CURVE
1.2 100
AVERAGE FORWARD CURRENT. (A)

1.0

0.8

INSTANTANEOUS REVERSE CURRENT. ( A)

10

0.6

0.4
1 Tj=125 0C
0.2

0 Tj=75 0C
0 20 40 60 80 100 120 140 160
o 0.1
LEAD TEMPERATURE. ( C)
Tj=25 0C

FIG.3- MAXIMUM NON-REPETITIVE FORWARD

SURGE CURRENT 0.01
100
PEAK FORWARD SURGE CURRENT. (A)

50
0.001
0 20 40 60 80 100 120 140
20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
S 1 A -S
1K
10
S1M

8.3ms Single FIG.5- TYPICAL FORWARD CHARACTERISTICS

2 Half Sine Wave 100
Tj=Tj max
1 50
1 2 5 10 20 50 100
NUMBER OF CYCLES AT 60Hz 20
INSTANTANEOUS FORWARD CURRENT. (A)

10
FIG.4- TYPICAL JUNCTION CAPACITANCE
100 5

2
50 Tj=25 0C
JUNCTION CAPACITANCE.(pF)

f=1.0MHz 1
Vsig=50mVp-p
20 0.5

10 0.2

0.1
5
0.05

2 0.02

0.01
1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.01 0.1 1 10 100
REVERSE VOLTAGE. (V) FORWARD VOLTAGE. (V)

FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM

50W 10W
NONINDUCTIVE NONINDUCTIVE trr
+0.5A

(-)
DUT
(+) PULSE 0
50Vdc GENERATOR
(approx) (NOTE 2) -0.25A
(-) 1W OSCILLOSCOPE
NON (NOTE 1) (+)
INDUCTIVE

NOTES: 1. Rise Time=7ns max. Input Impedance= -1.0A

1 megohm 22pf 1cm
2. Rise Time=10ns max. Sourse Impedance= SET TIME BASE FOR
50 ohms 5/ 10ns/ cm

Note: Specification is subject to change without further notice. For more details and updates, please visit our website.