12/5/23, 11:41 AM View Form

M/S Rahim Traders

Electrical Works

Bill of Quantities

Bill of Quantities

Unit Unit Total Total

Item
Item Measurement Price (In Price (In Price (In Price (In
Group Code Description of Item Quantity
no. Unit figures: words: figures: words:
(if any)
BDT) BDT) BDT) BDT)

1 Electrical Electrical- ''CONCEALED CONDUIT Point 17.000 350.001 Three 5950.017 Five
01 (a) POINT WIRIN((BYM) Hundred Thousand
(WITHOUT SWITCH): and Fifty Nine
Concealed conduit wiring point Zero Hundred
for following point looping Zero One and Fifty
at the switch board with point Zero
earth terminal with 1C-2 x One
1 .5 sqmm PVC insulated Seven
and shealhed stranded
cable (BYM) & lC-2x1.5
sqmm PVC insulated ECC
(BYA) (Green / yellow bi-
colour) including circuit
wiring with (From SDB to
Switch Board) 1C-2x2.5
sqmm PVC insulated and
sheathed stranded cable
(BYM) & 1C-2x2.5 sqmm
PVC insulated ECC (BYA)
Green / Yellow bi-colour
through PvC conduit (one
conduit from switch board
to common point on
ceiling is considered to
draw 3 pair ofcable) of
reputed manufacturerlof
minimum 25 mm dia & 1.7
mm wall thickness
complete with l8 SWG GP
sheet / PVC switch board
pull box with 3mm
thickness complete with l8
SWG GP sheet / PVC
switch board pull box with
3mm thick ebonite sheet
cover. fixing materials etc.
(without switch) as
required including
mending the damages
good. All electrical
contacts shall be of brass /
copper connected through
connector or soldering (no
twisting shall be allowed)
and cables shall be
manufactured and tested
according to IEC / BS /
VDE standard along with
relevant BDS standard as
per detailed specification
mentioned in Annexure- l.
The work shall be carried
https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 1/7
12/5/23, 11:41 AM View Form
out as per direction &
approval ofthe Engineer ln
Charge.
Cable manufacturer(s)
must have valid type test
certificate (within last
seven years) from
internationally accredited
laboratory (like CPRI,
KEMA etc) accepted /
approved by the Engineer
ln Charge.
Light / exhaust or wall
bracket fan point''

Three Six
Electrical- Hundred Hundred
2 Electrical Fan point Point 2.000 300.001 600.002
01 (b) point Zero point Zero
Zero One Zero Two

''CONCEALED WIRING
(BYM) :
Concealed conduil wiring
with followine PVC
insulated and sheathed
stranded cable (BYM) &
PVC insulated Green /
Yellow bi- coloured ECC
wire (BYA) rhrough PVC
conduit of reputed
manufacturer complete
with l8 SWC GP sheet pull
box with 3mm thick
ebonite sheet cover. fixing
materials etc. as required
including mending the
damages good. All
electrical contacts shall be
of brass / copper
connected through
Seventeen
connector or soldering (
One Thousand
no twisting shall be
Hundred Three
allowed) and cables shall
and Hundred
Electrical- be manufactured and
3 Electrical Meter 139.000 125.001 Twenty- 17375.139 and
02 (a) tested according to IEC /
Five point Seventy-
BS / VDE standards along
Zero Zero Five point
with relevanl BDS
One One Three
standard as per detailed
Nine
specification mentioned in
Annexure- 1. The work
shall be carried out as per
direction & approval ofthe
Engineer ln Charge.
Cable manufacturer(s)
must have valid type test
certificate within last
seven years) from
internatioally accredited
laboratory (like CPRI,
KEMA etc) accepted /
approved by the Engineer
ln Charge. 1C-
2x2.5sqmm(BYM) cable
with 2.5sqmm (BYA) ECC
wire through PVC pipe of
minimum inner dia 16 mm
having wall thickness of
1.5 mm.''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 2/7
12/5/23, 11:41 AM View Form

Two
1C-2x4.0 sqmm (BYM) One
Thousand
cable with 4 sqmm (BYA) Hundred
Six
Electrical- ECC wire through PVC and
4 Electrical Meter 22.000 120.001 2640.022 Hundred
02 (b) pipe of minimum inner dia Twenty
and Forty
20 mm having wall point Zero
point Zero
thickness of 1.5 mm. Zero One
Two Two

''CIRCUIT BREAKER
(SPMCB):
Providing & fixing on a
prepared board 250 volt
grade following single pole
miniature circuit breaker
(SPMCBS) having
minimum breaking
Four
capacity 6-KA / 10 KA with Three
Thousand
thermal over-current and Hundred
Electrical- Two
5 Electrical instantaneous Each 12.000 350.001 and Fifty 4200.012
03 (a) Hundred
electromagnetic short point Zero
point Zero
circuit release provision as Zero One
One Two
per BDS IEC and IEC/
VDE/ NEMA/ BS/JIS
standard.
SPMCBSs accepted /
approved by the engineer-
in charge.
5 - 40 Amps (minimum 6
KA) MCB''

Four Eight
Electrical- 60 / 63 Amps (minimum Hundred Hundred
6 Electrical Each 2.000 400.001 800.002
03 (b) 10 KA) MCB point Zero point Zero
Zero One Zero Two

''SOCKET OUTLETS :
Providing & fixing 250 volt
single phase 3-pin
combined switch socket
outlet (surface /
Concealed type)
Manufactured / Assembled
and tested in accordance
with IEC / VDE / NEMA /
BS / JIS along with
relevant BDS IEC Three
Three
standard, mounted on Thousand
Hundred
Electrical- required size l8 SWG Five
7 Electrical Each 10.000 350.001 and Fifty 3500.010
04 galvanized plain sheet Hundred
point Zero
board / Plastic Board point Zero
Zero One
(Self-extinguishing 650 One
degree centigrade) of 76.2
mm. (3'''') depth.
(Manufacturer shall have
cenificate of standard
which they follow).
(a). 13 / 15 / 16 / 20 Amps.
Assembled and made in
BANGLADESH / CHINA /
INDIA / TURKEY /
VIETNAM''

8 Electrical Electrical- ''GANG SWITCH : Each 3.000 400.001 Four 1200.003 One
05 (a) Providing & fixing 250 Hundred Thousand
volts. 5 / 6 amps point Zero Two
(minimum) concealed type Zero One Hundred
following switch / switch point Zero
socket Manufactured / Zero Three
Assembled and tested in
accordance with IEC /

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 3/7
12/5/23, 11:41 AM View Form
VDE / NEMA / BS / JIS
along with relevant BDS
IEC standards mounted
on required size 18 SWG
galvanized plain sheer /
PVC board
(Self.extinguishing 650
Degree Centigrade) of
76.2 mm (3'') depth. All
electrical contacts shall be
ofbrass / copper
Assembled and made in
BANGLADESH / CHINA /
INDIA / TURKEY /
VIETNAM.
Three gang switch''

Four Eight
Electrical- Hundred Hundred
9 Electrical Four gang switch Each 2.000 400.001 800.002
05 (b) point Zero point Zero
Zero One Zero Two

Four Eight
One gang switch & one 5
Electrical- Hundred Hundred
10 Electrical amps. 2-pin socket Each 2.000 400.001 800.002
05 (c) point Zero point Zero
combined .
Zero One Zero Two

''Gang type Fan

Regulator: Four Eight
Electrical- Assembled and made in Hundred Hundred
11 Electrical Each 2.000 400.001 800.002
05 (d) BANGLADESH / CHINA / point Zero point Zero
INDIA / TURKEY / Zero One Zero Two
VIETNAM''

''EARTHING:
Earthing the electrical
installation with 40 mm
(1.5'') dia G.I. pipe (earth
electrode) having 6.35
mm. dia hole across the
pipe at 305 mm. interval
securely bonded by
soldering with 2 nos. of
No-2 SWG HDBC earth
leads (at the top of the
electrode) with its
protection by 20 mm.
(3/4'') dia G.I. pipe up-to One One
Electrical- plinth level run at a depth Thousand Thousand
12 Electrical Per set 1.000 1000.001 1000.001
06 of 609.6 mm (2 ft.) below point Zero point Zero
G.L up-to main board to Zero One Zero One
be earthed including
necessary connecting
copper sockets, bolts,
nuts, etc. complete for
maintaining earth
resistance within 1 ohm.
[Fig : 4.19]
Depth of bottom of main
electrode at 19050 mm.
(62.5 ft) from GL & length
of electrode 18288 mm.
(60 ft).
''

13 Electrical Electrical- Providing & drawing no-2 per meter 15.000 120.001 One 1800.015 One
07 HDBC wire through 12.7 Hundred Thousand
mm. (½'') dia G.I. pipe and Eight
including fitting, fixing the Twenty Hundred

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 4/7
12/5/23, 11:41 AM View Form
G.I. pipe in wall or column point Zero point Zero
complete as required. Zero One One Five

''TUBE & PANEL LIGHT

FITTINGS (LED):
Supply & fixing LED tube
& panel light fittings of
following specifications:
Luminour cfficacy: 100
lrn/W(minimum)
Powcr Factor: minimum
0.95
Colour Rendering
Index(Ra) :
i) For Residential buildings
Ra ≥ 80
ii) For office & other types
of buildings 70≤Ra≤85
Driver : MEANWELL /
OSRAM / PHILIPS / IEC
standard.
One
LED chips : EPISTOR /
Four Thousand
OSRAM / PHILIPS /
Electrical- Hundred Two
14 Electrical CREE / BRIDGELUX or Each 3.000 400.001 1200.003
08(a) point Zero Hundred
equivalent.
Zero One point Zero
Colour temperature :
Zero Three
3500K-6500K (Warm-
White). Model & sample to
be accepted/ approved by
the Engineer in charge (
with 2 years warranty).
Material : Aluminium Aloy,
ABC Plastic.
Gloria Cat NO-GTF (LED).
774
ENERGY+EPTL-1023
Cosmo cat no-BDTCL-LE-
xTS-01
Adex-AD-BL 840
Asha Cat no-ACS- LTLS-
1635
Megaman - MXL2027
or equivalent product. 2' x
9 W''

Three
Four Thousand
Electrical- Hundred Two
15 Electrical 4' x 18 W Each 8.000 400.001 3200.008
08(b) point Zero Hundred
Zero One point Zero
Zero Eight

16 Electrical Electrical- ''SPOT/ PANEL LED Each 3.000 400.001 Four 1200.003 One
09 LIGHT FITTINGS : Hundred Thousand
Supply & fixing of LED point Zero Two
Spot/LED light fittings of Zero One Hundred
following specification: point Zero
(i) Round panel (surface Zero Three
type )
Material : Alu Aloy, Acrylic.
Gloria Cat NO-GSDL-513
ENERGY+ cat. no. -
EPPLLED-2006
Cosmo cat no-BDTCL-
LSRPL-01
Adex-AD-SDL
830/840/865
Asha Cat no-ACS LPL-
1451
Megaman - MXTL1013-Y

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 5/7
12/5/23, 11:41 AM View Form
Walton WLED-DSPLR-
200-UL or equivalent
product
(ii) Colour temperature :
3500K-6500K (Warm-
White)
(iii) Luminux flux : 100 +
1m/w
(iv) LED chips : EPISTOR
/ OSRAM / PHILIPS /
CREE / BRIDGELUX or
equivalent.
(v) Driver : MEANWELL /
OSRAM / PHILIPS / IEC
standard. Model & sample
to be accepted/ approved
by the Engineer in charge
( with 2 years warranty).
6 Watt, Approximate Dia -
127mm''

''CEILLING FAN :
Supplying & fixing AC
capacitor type ceiling fan
(without regulator) of
following specifications
and sizes complete with
minimum 305 mm (1 ft)
long and 0.75 -1.0'' dia,
2.3 mm thickness MS pipe
down rod, tempered cast
aluminum blades, 2.5 µf
400V AC capacitor,
canopy, double Z ball
bearing, best quality
silicon sheet core, best
quality copper made super
enamel wire, aluminum
alloyed casting body/
Four Eight
metal body having safety
Electrical- Hundred Hundred
17 Electrical pin with powder coated Each 2.000 400.001 800.002
10 point Zero point Zero
heat / docu paint as
Zero One Zero Two
required as per BDS 818
etc. connecting PVC wire
complete as required.
Rated voltage : 220 volts
Rated frequency : 50 Hz
Rated speed : 300 rpm ± 5
%
Service value : Minimum
3.5 m3 / min / watt
Temperatur rise :
Maximum 55ºC
Class of insulation : Class-
E
Noise level : 60 db at a
distance 1 meter.
1400 mm. (56'') Sweep
Input power : Maximum 70
watt.''

18 Electrical Electrical- ''EXHAUST FAN : Each 3.000 390.001 Three 1170.003 One
11 Providing and fixing of Hundred Thousand
following axial flow A.C and One
capacitor type wall Ninety Hundred
mounted exhaust fan point Zero and
complete with blade, steel Zero One Seventy
frame standard wall louver point Zero
shutter, PVC insulated Zero Three
connecting wire etc

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 6/7
12/5/23, 11:41 AM View Form
complete as required
including cutting wall and
mending good the
damages as per direction
of the Engineer.
10'' Exhaust fan plastic
body (foreign made
accepted / approved by
the Engineer).

''FAN CLAM:
Providing & lixing U tvpe
lan -lamp made of l2 mm.
dii MS rod having at least Three Six
750 mm clearance around Hundred Hundred
Electrical-
19 Electrical and shall be placed above Each 2.000 301.501 and One 603.002 and Three
12
the MS rod mesh ofthe point Five point Zero
roofslab including Zero One Zero Two
necessary bolts, nuts etc.
as required as per sample
approved by the Engineer.

Forty-Nine
Thousand
Six
Grand
49638.250 Hundred
Total:
and Thirty-
Eight point
Two Five

* Note: All applicable taxes, custom duties, VAT and other levies payable by the Contractor under the Contract shall be included
in the unit prices submitted by the Tenderer.

This Electrical Works is Electronically Signed by Mr. NIZAM UDDIN on behalf of M/S Rahim Traders

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=4775881&userId=186620&nture=Works&tenId=883736&procMtd=OTM 7/7