PTN 990

Highly Integrated, Large-Capacity Access, Low Power

Consumption, Easy O&M, Future Proof

Device Overview

Appearance Key Features Software/Hardware Description

 High access capability: Supports 40GE ports, mobile
 Star boards
communications services, home broadband, and enterprise
group user access, all in a uniform bearer mode 1x40GE: Highest access layer networking
capability in the industry
 Low power consumption: Supports green
software/hardware design, dynamic fine-grained energy
conservation control, smart heat dissipation, and 230 W
 Highly integrated
power consumption with typical configurations.
 Compact: 5 U high, installed in either an ETSI
 Easy O&M: Supports PnP, remote commissioning, service-  Software features
standard cabinet or 19-in cabinet
level E2E detection, and performance monitoring  Service: Multi-service access and uniform
 Large capacity: 160 Gbit/s packet switching capacity
 Future-proof: Smooth evolution to 640G/100G and to SDN bearer, for efficient resource utilization
 Dense slots: 14 service slots
network
 Protection HQoS: Hierarchical E2E QoS
management to provide exact service-type
Networking
specific differentiated transport services

 Protection: Multi-level carrier-grade protection,

which helps reliably transmit services

Mobile base  O&M: An NMS runs DCN to manage PTN NEs.

stations Mobile
communications/ Multi-level OAM implements layered rapid fault
E1/STM-1 TDM Home broadband
40GE detection and location.
Home core device
broadband ring
FE/GE/10GE Eth  Synchronization: Precision clock/time
synchronization, which helps lossless service
Enterprise Enterprise
group user
transmission
group user
Usage Scenarios

National and provincial

backbone networks

Core
100GE/nx100GE

100GE ring 100GE ring

Aggregation

10GE ring 40GE ring

GE ring
Access
10GE ring
PTN 990
PTN 990

Home broadband Mobile base stations Enterprise group user Mobile base stations

160G switching capacity/40G networking capability,

Ethernet (GE/10GE/40GE) and TDM (E1/STM-1) port access, providing large-scale
access for mobile bearer, enterprise group user, and home broadband services
Software Features — Various Service Access and Uniform Network Bearering

Mobile base stations

Mobile
communications/Home
broadband
E1/STM-1 TDM core device
40GE ring
Home broadband
FE/GE/10GE Eth

Enterprise
group user
Enterprise group user

CES PW Eth PW MPLS tunnel

CES

PW
MPLS tunnel

CES service TDM Eth TDM

Payload

Eth

PW
Payload Payload
MPLS tunnel
Ethernet
service Eth Eth Eth

UNI NNI UNI

User-side Ethernet (GE/10GE/40GE) and TDM (E1/STM-1) ports provide user access, and
network-side E-Line/E-LAN and CES services are transmitted along MPLS tunnels/PWs, which
efficiently uses resources.
Software Features — Hierarchical E2E QoS

Mobile base stations

Mobile
communications/Home
E1/STM-1 TDM
broadband
40GE ring
core device
Home broadband FE/GE/10GE Eth

Enterprise
Enterprise group user group user

Inbound port/V-UNI PW Tunnel Ring network Outbound port

CAR WRED Shaping Shaping Shaping Shaping Reverse

mapping

 User packet priorities

Protocol packets Tunnel
mapped to device internal  Congestion avoidance Ring
priorities bandwidth-  Internal priorities mapped
Voice service  Priority-based scheduling bandwidth-
 User packet classification based traffic to tunnel/PW EXP
 PW bandwidth-based traffic based traffic  Outbound port bandwidth-
Video service  SLA-based assignment of shaping shaping
shaping based traffic shaping
priorities and CIR/PIR to
Data service
each flow

Supports hierarchical E2E QoS management and exactly provides service-

specific differentiated transport services.
Software Features — Multi-level Carrier-Grade Protection

Mobile base stations

Mobile
communications/Home
broadband
core device

E1/STM-1 TDM
Home broadband 40GE ring
FE/GE/10GE Eth

Enterprise group user

Enterprise group user

Device-level protection
(important boards 1+1
hot backup)

Bearer layer protection:

 MPLS tunnel APS: : Two PWs on disjoint paths protect each other.

 PW APS: Two PWs on disjoint paths protect each other.

 MPLS tunnel ring network protection: Dual-fiber bidirectional protection

from multiple points of failure

Data link layer protection: Data link layer protection:

 LAG: Ethernet link protection  LAG: Ethernet link protection

 LMSP: STM-1 link protection  LMSP: STM-1 /4 link protection

UNI NNI UNI

Supports device-level protection and data link/bearer layer carrier-grade

protection, which helps reliably transmit services.
Software Features — O&M

NMS

Mobile base stations DCN

Mobile
communications/Home
broadband
core device

Home broadband E1/STM-1 TDM

40GE ring
FE/GE/10GE Eth

Enterprise group user

Enterprise group user

Service-layer OAM
 802.1ag: Automatic Ethernet service connectivity detection, fault location, and Ethernet service

performance detection
 CES OAM: PRBS connectivity detection and CES alarm advertisement

Bearer layer OAM

 MPLS OAM: Automatic MPLS tunnel/PW detection and location
 MPLS-TP OAM: Automatic MPLS tunnel/PW/section detection and

location

Data link layer OAM

 802.3ah: Automatic detection

of direct links to Ethernet Data link layer OAM Data link layer OAM
ports (802.3ah) (802.3ah and TDM OAM)
 TDM OAM: Automatic

detection of direct links to

TDM ports

UNI NNI UNI

 Supports the NMS that runs DCN to manage PTN NEs.

 Supports data link layer OAM, bearer layer OAM, and service layer OAM, which implements
hierarchical rapid detection and fault location.
Software Features — Precision Clock and Time Synchronization

GPS

Mobile base stations Mobile

communication/home
broadband
TDM core device
E1/STM-1
40GE ring

Home broadband FE/GE/10GE Eth

Enterprise
Enterprise group user group user

 External clock/time  External clock/time

 IEEE 1588v2  IEEE 1588v2 (Clock/time synchronization)  IEEE 1588v2
 Synchronous Ethernet  Synchronous Ethernet  Synchronous Ethernet
 TDM clock  (clock synchronization)  TDM clock synchronization
synchronization

UNI NNI UNI

Supports various clock and time synchronization modes and provides precision clock and
time synchronization for services, which helps implement lossless service transmission.
Device Configuration & Technical Specifications

Device Configuration Technical Specifications

System control board Subrack parameters

• Controls the system and schedules services. Cabinet N63B, N63E, and 19-inch cabinets
TPJ1CXP • Processes clock signals, and provides auxiliary
interfaces System control boards: 1+1 Power boards:
Slots
• Supports 1+1 hot backup. 1+1 Service boards: 14

Service boards 220 x 442 x 222 (8.66 in. x 17.4 in. x 8.74 in.)
HxWxD (mm)
5 U high, 19 in. wide
TPJ1EXL1 1-port 40GE Ethernet optical interface board
Subrack weight 8 kg (17.64 bl.) (without boards)
TPJ1EX1S 1-port 10GE Ethernet optical interface board (SFP+)
Working voltage –40 V to –72 V (DC)
TPJ1EM8F 8-port GE/FE Ethernet optical interface board Switching capacity 160 Gbit/s
TPJ1EM8T 8-port GE/FE Ethernet electrical interface board Working temperature 0°C to 50°C (32°F to 122°F ) (long term)
TPJ1ML1A 16-port E1 interface board (75 ohm) Maximum number of ports
TPJ1ML1B 16-port E1 interface board (120 ohm) 40GE 2
TPJ1MD1A 32-port E1 interface board (75 ohm) 10GE 16
TPJ1MD1B 32-port E1 interface board (120 ohm) GE/FE optical 112
TPJ1SQ1 4-port channelized STM-1 interface board GE/FE electrical 112
Power board 10M electrical 112
• Provides -48 V DC power ports STM-1 optical
TPJ1PIU 56
• Supports 1+1 hot backup. (VC3/VC4)

Fan board STM-1optical

56
(VC12)
Dissipates heat for a device, supports stepless
TPJ1FAN
speed adjustment, and provides fan redundancy. E1 448