UNBEATABLE

PRODUCTS
METAL DIVISION

CHECK OUT OVER 20,000 ARTICLES ONLINE

ESHOP.WURTH.CO.NZ
 ZINC SPRAY LIGHT PERFECT

Perfect zinc spray

Outstanding long-term protection and optimum

metal surface appearance
High layer thickness in first spray pass
• High degree of safety thanks to optimum weathering
protection
• Minimum amount of time spent, as only one operation is
required
• Good coverage
Versatile use with adjustable spray head
Large area and minor repairs can be carried out quickly and
reliably with the variable spray head.
High degree of resistance to running
High degree of wear resistance
Tested corrosion protection in accordance with
DIN
• Perfect zinc spray, light: 250 hours
• Perfect zinc spray: 500 hours
• Can be used for repairs in accordance with DIN EN ISO
1461
Spot weldable

Contents 400 ml

Chemical basis Colour Gloss level Art. no. P. Qty.

Acrylic resin Zinc Matt 0893 114 113 1/12
Modified alkyd resin Zinc, bright Glossy 0893 114 114 1/12

Details/Application
For visual enhancement, repair and protection against corrosion of metallic surfaces.
CL01_3006111002, Rev: 0.358, State: 05. 02. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 2

 Instructions
##keep##

##keep##

The application surface must be clean, dry and free from grease. Remove rust and old loose paint, then sand and clean. Shake
can vigorously for at least 2 minutes before use.

Notice
Perfect zinc spray and Perfect light zinc spray contain zinc, and therefore offer optimum, active cathodic protection against corro-
sion. If the surface is damaged, the zinc coating sacrifices itself (sacrificial anode), thereby protecting the metal against rust. The
remaining products protect the entire surface against rust. If the surface is damaged, the metal is no longer protected.
Not suitable as adhesive base for PU, MS polymer or hybrid sealing compounds.

Corrosion protection after 250 hours of salt spray test according to DIN 50021 SS

Zinc spray bright perfect and competitive product

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each applica-
tion. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Spare parts Art. no.

Replacement spray head Variator for RAPID 2-component primer filler 0891 098

##keep##

Related products Art. no.

##keep##
Acetone cleaner for cleaning and degreasing parts of all kinds Contents 0.25 l 0893 460
Related products
Designation Art. no.
for
0893 114 114 Acetone cleaner for cleaning and degreasing parts of all kinds Contents 0.25 l 0893 460
CL01_3006111002, Rev: 0.358, State: 05. 02. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 3

 MULTI-PURPOSE LUBRICANT

Multi-purpose lubricant Ultra 2040

Lubricant, penetrating and water displacing

agent
• Loosens seized and rusted parts
• With PTFE and 360° valve
• Silicone-free
• Removes moisture from electrical systems
• Strong water displacement effect

Details/Application
Also suitable for boats, caravans and motor vehicles.

Instructions
##keep##

##keep##

Ultra 2040 can be used both indoors and outdoors. Displaces moisture from all electrical equipment. Lubricates fittings, locks
etc.
CL01_3008070902, Rev: 0.386, State: 24. 11. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 4

 SPEED CUTTING DISC

Speed cutting disc For stainless steel

Very good cutting performance with a long ser-

vice life
• Very fast cutting times
• Extremely thin for precise, almost burr- and chatter-free
cuts (very clean and cool cutting surfaces)
• Very easy to use and ensures user- and machine-friendly
working
• Very good breakage resistance

Versatility ●●○○
Service life ●●●○
Cutting ability (point system) ●●●●
Handling/user-friendliness
●●●○
(point system)
Cut quality (point system) ●●●○
Max. circumferential speed 80 m/s
Color Coding System ▉ Stainless steel

Max. rotation
Diameter Thickness Drill hole Design Art. no. P. Qty.
speed
50 mm 1 mm 6 mm Straight 30500 rpm 0664 130 501 50
60 mm 1 mm 6 mm Straight 25000 rpm 0664 130 601 50
76 mm 1 mm 10 mm Straight 20100 rpm 0664 130 761 10/50
100 mm 1 mm 10 mm Straight 15300 rpm 0664 131 000 25
115 mm 0.8 mm 22.23 mm Cranked 13300 rpm 0664 131 148 25
115 mm 1 mm 22.23 mm Straight 13300 rpm 0664 131 150 25
115 mm 1 mm 22.23 mm Straight 13300 rpm 0664 331 150 100
115 mm 1.6 mm 22.23 mm Straight 13300 rpm 0664 131 151 25
125 mm 0.6 mm 22.23 mm Cranked 12250 rpm 0664 131 246 10
125 mm 0.8 mm 22.23 mm Cranked 12250 rpm 0664 131 248 25
125 mm 1 mm 22.23 mm Straight 12250 rpm 0664 131 250 25
125 mm 1 mm 22.23 mm Straight 12250 rpm 0664 331 250 100
125 mm 1.6 mm 22.23 mm Straight 12250 rpm 0664 131 251 25
180 mm 1.6 mm 22.23 mm Straight 8500 rpm 0664 131 801 25
180 mm 2 mm 22.23 mm Straight 8500 rpm 0664 131 802 25
230 mm 1.9 mm 22.23 mm Straight 6600 rpm 0664 132 301 25
230 mm 2.5 mm 22.23 mm Straight 6600 rpm 0664 132 302 25
CL01_7509020205, Rev: 0.376, State: 09. 11. 2023

Details/Application
• Suitable for steel and especially for stainless steel
• Particularly effective at cutting thin-walled pipes and profiles, thin metal sheets, bodywork panels etc.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 5

 Cutting quality Thermal load on thin sheet metal

0.6 mm, 0.8 mm, 1.0 mm, 1.6 mm 0.6 mm, 0.8 mm, 1.0 mm, 1.6 mm

Proof of performance
• Suitable for KWU Class II (e.g. pipeline and reactor construction)
• Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organisation for
the Safety of Abrasives)

Notice
• Storage: dry, at 20°C ambient temperature
• Work only with appropriate protective clothing
• Always use an appropriate protective cover when performing cutting work
• Only use undamaged discs
• Do not jam/tilt the discs during cutting - increased risk of breakage!
• Ensure proper contact pressure
• Always clamp cutting discs (straight design) with metal ring towards the machine
• For further information, please refer to the package insert

Use clamps so material doesn’t shift Clamp in one position so unwanted material Place C-Section in a V block clamp when
can fall away cutting. Eliminating flex
CL01_7509020205, Rev: 0.376, State: 09. 11. 2023

##keep##

Related products Art. no.

##keep##
Safety goggles CEPHEUS® 0899 102 250
Related products
Designation Art. no.
for
0664 131 246 Angle grinder EWS 12-125 SOLID 5707 040 0
0664 131 248 Angle grinder EWS 12-125 SOLID 5707 040 0
Angle grinder EWS 17-125-EQ POWER 5707 061 2
0664 131 250
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE 5701 402 005

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 6

 Related products
Designation Art. no.
for
Angle grinder EWS 17-125-EQ POWER 5707 061 2
0664 131 251
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE 5701 402 005
0664 131 801 Two-hand angle grinder EWS 24-180-S 0702 445 20
0664 131 802 Two-hand angle grinder EWS 24-180-S 0702 445 20
0664 132 301 Safety angle grinder SWS 26-230-T 5707 090 0
0664 132 302 Safety angle grinder SWS 26-230-T 5707 090 0
Angle grinder EWS 17-125-EQ POWER 5707 061 2
0664 331 250
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE 5701 402 005
CL01_7509020205, Rev: 0.376, State: 09. 11. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 7

 Cutoff and Roughing Wheels
General working and safety precautions
Ô Clearly laid-out and correct storage Ô Only secure cutoff and roughing Ô The use of damaged wheels
of wheels ˈ dry, at 20°C room wheels with original clamping increases the risk of an accident.
temperature flanges provided for this purpose. Only process undamaged wheels.
Ô Work only when wearing the Do not use defective or worn Ô The permissible circumferential
appropriate protective clothing flanges. speed may not be exceeded.
such as safety goggles, gloves, Ô Only carry out cutting and roughing Ô Do not mount worn wheels on
steel-capped work shoes, hearing work with the corresponding smaller machines.
protectors and dust mask. protective hood.

Areas of use
Materials Material Designations
Steel General construction steels
High-strength construction steels
Structural steels
Tool steels
Hardened steels

Non-ferrous metals / Aluminum

Aluminum alloys
Aluminum Copper
Brass
Bronze
Other lubricating non-ferrous metals
Stainless-steel sheets
Stainless steel Non-alloyed stainless steels
Alloyed and high-alloy steels
Rust and acid-proof steels
Chrome-nickel steel

Natural stone
Stone Artificial stone
Chalky sandstone
Concrete/reinforced concrete

Special Working and Safety Precautions wrong right

Cutting: Ô Attention: With cutoff wheels
Ô Cutoff wheels are not permissible for with a thickness of 1.0 mm, it must
rough grinding. be checked whether the flange
Ô Do not jam or tilt wheels in the cut. mounting of the angle grinder
ˈ Increased risk of breakage! is suitable for the 1.0 mm wheel. wrong right
Ô A slight pendulum movement in the Otherwise firm seating of the wheel
cut causes the wheel to be cut free. must be ensured with the cardboard
Ô Ensure proper contact pressure. rings provided for this purpose.
ˈ The machines own weight is wrong right
generally sufficient! Roughing:
Ô Ensure proper clamping of Ô For free-handed grinding.
workpiece. Ô Ensure the proper contact angle of
Ô Always clamp cutoff wheels (straight the roughing wheel.
version) with metal ring toward ˈ A contact angle which is too flat
MWF - 06/07 - 00094 - © •

machine. will cause the wheel to break out

around the edge. Contact angle of a roughing wheel
wrong right

8
 BRAKE CLEANER PLUS

Brake cleaner

For cleaning and degreasing during maintenance

and repair work
Fast flash-off behaviour and excellent cleaning
performance
• Fast and effective removal of soot, grease, brake dust and
oily residues
• Residue-free cleaning
Acetone-free
High degree of material compatibility with paints, plastics,
seals and rubber
AOX- and silicone-free

Chemical basis Naphtha

Shelf life from production 24 Month
Illustration only

Contents Container Smell/fragrance Art. no. P. Qty.

500 ml Aerosol can Solvent-like 0890 108 7 1/24
5l Canister Characteristic 0890 108 715 1
20 l Canister Characteristic 0890 108 716 1
20 l Canister Characteristic 0890 108 720 1
60 l Barrel Characteristic 0890 108 760 1

Details/Application
For quickly removing oily/greasy residues, soot, brake dust on vehicles, disc and drum brakes, engine and gearbox housings etc.

Instructions
##keep##

##keep##

Spray the surfaces to be cleaned and wipe with a clean cloth. Repeat the process for heavy soiling.

Notice
Do not spray on hot components. Not suitable for surface cleaning of adhesive areas. Prior to application, the compatibility of
rubber or plastic parts and painted surfaces should be tested on an invisible area.
CL01_3007070101, Rev: 1.53, State: 13. 02. 2024

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each appli-
cation. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

##keep##

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 9

 CUT+COOL ECO DRILLING OIL
CUT+COOL drilling and cutting oil

Multi cutting oil for light to medium machining

work
Universal application
Cools even while spraying
• Protects tools
• Prevents welding of small material particles on the cutting
edge
Good creep properties, penetrates even the
smallest tolerances
Excellent corrosion protection
• Provides lasting protection against further rust and corro-
sion
• No post-treatment or preservation required
Free of silicone, chlorine, resins, and acids

Colour Light brown

Smell/fragrance Perfumed
Chemical basis Mineral oil
Shelf life from production 18 Month

Contents Container Art. no. P. Qty.

5l Canister 0893 050 1 1
400 ml Aerosol can 0893 050 004 1/12
Cooling lubricant Ultra HD
Drilling and cutting oil Eco
Drilling and cutting paste

Drilling and cutting foam

Cooling lubricant Ultra

Drilling and cutting oil

Drilling and cutting oil

Cutting oil DVGW

Perfect

Perfect
CL01_3008010302, Rev: 0.400, State: 26. 01. 2024

Materials
Steel, alloyed steel xx xxx xxx xxx xxx xx xx xxx
High-alloy steel xx xxx xxx xxx xxx xx xx xxx
Cast iron, grey cast iron xx xxx xxx xx xxx x xx xxx
Tungsten carbide xx xxx xxx xx xxx x x xx
Non-ferrous base metal
xx xxx xx xxx xxx x x xx
(copper, brass etc.)
Titanium x xxx xxx xx xxx x x xx
Magnesium x xxx xxx xx xxx x x xx
Aluminium, aluminium
x xxx xxx xx xxx x xx xxx
alloys
Machining processes

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 10

 Cooling lubricant Ultra HD
Drilling and cutting oil Eco
Drilling and cutting paste

Drilling and cutting foam

Cooling lubricant Ultra

Drilling and cutting oil

Drilling and cutting oil

Cutting oil DVGW

Perfect

Perfect
Materials
Lathing, automatic lathes xx xxx x x x x xx xxx
Drilling, countersinking,
xx xxx xxx xxx xxx x xx xx
reaming
Deep drilling x xxx xxx xx xx x x xx
Sawing xx xxx xx xxx xxx x xx xx
Thread cutting xx xxx xxx xxx xxx xx xx xx
Thread forming, rolling xx xxx xxx xxx xxx x x xx
Milling x xxx x xx xx x xxx
Sanding x xxx x x x x xxx xx
Forming, rolling, bending x xxx xx xx xx x x xx
Punching, fine punching x xx xx xx x x x
Broaching, toothing x xxx xx xxx xxx x x x
Features
Mineral oil with synth. ester

Mineral oil with synth. ester

Glycol and ester

Synth. ester
Mineral oil

Mineral oil

Mineral oil
Basis

Ester

Viscosity (mm2/s) 12 25 Paste-like 35 n/a 5 66 76

Minimum quantity lubri-
⎷ ⎷
cation
Free from mandatory
⎷ ⎷ ⎷ ⎷
warning symbols
Can be used overhead ⎷ ⎷
DVGW-approved ⎷
Biodegradable/approved
⎷
for use with food
Extremely high lubricating
⎷ ⎷ ⎷ ⎷ ⎷
performance
CL01_3008010302, Rev: 0.400, State: 26. 01. 2024

Extremely long tool life ⎷ ⎷ ⎷ ⎷ ⎷ ⎷

Minimal smoking ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Extremely low consumption ⎷ ⎷ ⎷ ⎷
Good creeping properties ⎷
Free of boric acid ⎷ ⎷ ⎷ ⎷
Low-foaming ⎷ ⎷
Extremely high microbial
⎷ ⎷
stability
Water hazard class 1 1 1 1 2 1 1 1
Formaldehyde-free ⎷ ⎷ ⎷ ⎷
Extremely gentle on the
⎷ ⎷ ⎷
skin (amine-free)

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 11

 Cooling lubricant Ultra HD
Drilling and cutting oil Eco
Drilling and cutting paste

Drilling and cutting foam

Cooling lubricant Ultra

Drilling and cutting oil

Drilling and cutting oil

Cutting oil DVGW

Perfect

Perfect
Materials
xxx excellent suitability
xx good suitability
x less favourable suitability
⎷ applicable

Details/Application
Multi-purpose cutting oil for light to medium machining.

Instructions
##keep##

##keep##

Spray the workpiece from about 20–30 cm.

The product is used as supplied.

Notice
Free from substances that impair wetting of paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each applica-
tion. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
CL01_3008010302, Rev: 0.400, State: 26. 01. 2024

Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

##keep##

Related products Art. no.

##keep##
Acetone cleaner for cleaning and degreasing parts of all kinds Contents 0.25 l 0893 460

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 12

 Related products
Designation Art. no.
for
Tap DN 45 thread for 5 l and 10 l plastic canisters 0891 302 01
0893 050 1 Filling system REFILLO® 0891 800 90
Compressed-air filling station Refillo® combi 0891 800 001
CL01_3008010302, Rev: 0.400, State: 26. 01. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 13

 QUATTRO PAINT SPRAY

Paint spray Quattro

Versatile, satin-finished thick-coat lacquer spray

with excellent covering and anti-rust properties.
Corrosion protection
• Easy-to-apply coating that does not run ensures 100%
resistance to weathering and UV (after min. 500 hours of
salt spray testing, no surface rust could be detected)
• Can be used on residual rust
Primer
Outstanding adhesion to virtually all surfaces. Can be
painted with virtually all commercially available paints.
Lacquer
• Excellent coverage. Very good coverage properties
• Dries extremely quickly
• Highly elastic
• High degree of shock and impact resistance Illustration only

• Good edge coverage

Supplied with fan nozzle
Low-mist, fatigue-free and metered spraying via special
valve.
Available in customer-specific RAL and special
colours

Contents 400 ml
Chemical basis Alkyd resin
Gloss level Silk gloss
Max. temperature resist-
100 °C
ance

Colour Art. no. P. Qty.

Signal yellow RAL 1003 0893 391 003 1/6
Golden yellow RAL 1004 0893 391 004 1/6
Maize yellow RAL 1006 0893 391 006 1/6
Daffodil yellow RAL 1007 0893 391 007 1/6
Light ivory RAL 1015 0893 391 015 1/6
Zinc yellow RAL 1018 0893 391 018 1/6
CL01_3006110701, Rev: 0.357, State: 09. 02. 2024

Colza yellow RAL 1021 0893 391 021 1/6

Traffic yellow RAL 1023 0893 391 023 1/6
Curry RAL 1027 0893 391 027 1/6
Melon yellow RAL 1028 0893 391 028 1/6
Yellow orange RAL 2000 0893 392 000 1/6
Red orange RAL 2001 0893 392 001 1/6
Vermilion RAL 2002 0893 392 002 1/6
Pure orange RAL 2004 0893 392 004 1/6
Traffic orange RAL 2009 0893 392 009 1/6
Deep orange RAL 2011 0893 392 011 1/6
Flame red RAL 3000 0893 393 000 1/6

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 14

 ColourColour Art. no. P. no.
Art. Qty. P. Qty.
Signal red RAL 3001grey RAL 7016
Anthracite 0893397016 0893
1/6 393 001 1/6
Carmine red RAL 3002 0893 393 002 1/6
Carmine red RAL 3002
Ruby red RAL 3003
0893393002 1/6
0893 393 003 1/6
Caterpillar
Traffic red RAL 3020 yellow BMS 0281 0893390281 1/6 393 020
0893 1/6
Ultramarine blue RALyellow
Caterpillar 5002 YJ38 FV 1286 0893391286 0893
1/6 395 002 1/6
Sapphire blue RAL 5003 0893 395 003 1/6
Daffodil yellow RAL 1007 0893391007 1/6
Signal blue RAL 5005 0893 395 005 1/6
Emerald
Azure blue green RAL 6001
RAL 5009 0893396001 1/6 395 009
0893 1/6
GentianFlame
blue RAL
red5010
RAL 3000 0893393000 0893
1/6 395 010 1/6
Steel blue RAL 5011 0893 395 011 1/6
Grey white RAL 9002 0893399002 1/6
Light blue RAL 5012 0893 395 012 1/6
Cobalt Hitachi
blue RAL orange
5013 BMS 2312 0893392312 1/6 395 013
0893 1/6
Pigeon Jet
blueblack
RAL 5014
RAL 9005 0893399005 0893
1/6 395 014 1/6
Sky blue RAL 5015 0893 395 015 1/6
Komatsu natural yellow BMS 1446 0893391446 1/6
Traffic blue RAL 5017 0893 395 017 1/6
EmeraldLight
greengrey RAL 7035
RAL 6001 0893397035 1/6 396 001
0893 1/6
PureRALorange
Leaf green 6002 RAL 2004 0893392004 1/6 396 002
0893 1/6
Olive green
PureRAL 6003
white RAL 9010 0893399010 0893
1/6 396 003 1/6
Moss green RAL 6005 0893 396 005 1/6
Silver grey RAL 7001
Reseda green RAL 6011
0893397001 1/6
0893 396 011 1/6
TurquoiseSkygreen
blueRAL
RAL 5015
6016 0893395015 1/6 396 016
0893 1/6
Yellow green RAL 6018
Traffic red RAL 3020 0893393020 0893
1/6 396 018 1/6
Light green RAL 6027 0893 396 027 1/6
Ultramarine blue RAL 5002
Silver grey RAL 7001
0893395002 1/6
0893 397 001 1/6
Mouse Vermilion RAL 2002
grey RAL 7005 0893392002 1/6 397 005
0893 1/6
Iron grey RAL 7011
White aluminium RAL 9006 0893399006 0893
1/6 397 011 1/6
Basalt grey RAL 7012 0893 397 012 1/6
Yellow green RAL 6018 0893396018 1/6
Slate grey RAL 7015 0893 397 015 1/6
Zinc
Anthracite yellow
grey RAL 1018 400
RAL 7016 0893391018 1/6 397 016
0893 1/6
Black grey RAL 7021 0893 397 021 1/6
Umbra grey RAL 7022 0893 397 022 1/6
Graphite grey RAL 7024 0893 397 024 1/6
Stone grey RAL 7030 0893 397 030 1/6
Blue grey RAL 7031 0893 397 031 1/6
Pebble grey RAL 7032 0893 397 032 1/6
Cement grey RAL 7033 0893 397 033 1/6
Yellow grey RAL 7034 0893 397 034 1/6
Light grey RAL 7035 0893 397 035 1/6
Dusty grey RAL 7037 0893 397 037 1/6
Agate grey RAL 7038 0893 397 038 1/6
Window grey RAL 7040 0893 397 040 1/6
Traffic grey A RAL 7042 0893 397 042 1/6
Traffic grey B RAL 7043 0893 397 043 1/6
CL01_3006110701, Rev: 0.357, State: 09. 02. 2024

Cream RAL 9001 0893 399 001 1/6

Grey white RAL 9002 0893 399 002 1/6
Signal white RAL 9003 0893 399 003 1/6
Jet black RAL 9005 0893 399 005 1/6
White aluminium RAL 9006 0893 399 006 1/6
Pure white RAL 9010 0893 399 010 1/6
Graphite black RAL 9011 0893 399 011 1/6
Papyrus white RAL 9018 0893 399 018 1/6
Fendt grey LM 0245 0893 390 245 1/6
Chassis grey IC 444 0893 390 444 1/6
Caterpillar yellow YJ38 FV 1286 0893 391 286 1/6

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 15

 Colour Art. no. P. Qty.
Volvo construction machinery yellow FV 1569 0893 391 569 1/6
Caterpillar yellow BMS 0281 0893 390 281 1/6
Volvo construction machinery yellow BMS 1130 0893 391 130 1/6
Liebherr yellow new BMS 1395 0893 391 395 1/6
Komatsu natural yellow BMS 1446 0893 391 446 1/6
Caterpillar yellow BMS 1656 0893 391 656 1/6
Hitachi orange BMS 2312 0893 392 312 1/6
Volvo construction machinery grey BMS 7328 0893 397 328 1/6
Bomag anthracite BMS 7452 0893 397 452 1/6
Volvo grey SM new BMS 7454 0893 397 454 1/6
Nova grey MB 7350 0893 397 350 1/6
Argentite grey DB 7354 0893 397 354 1/6
Arctic white DB 9147 0893 399 147 1/6
Optional 0893 339 12

Details/Application
Universal product for quick priming and painting of containers, chassis, attachments, tractors, agricultural and construction
machinery, winter service vehicles, canopies, crane systems, railings, gates, marine structures, pipes, lamp posts, transport
frames, skips etc. Surfaces: Hardened old paint, factory-primed new parts, bare steel sheets, zinc-plated steel sheets, manually
de-rusted surfaces, aluminium, paintable plastics, GFRP parts, wood.

Instructions
##keep##

##keep##

Shake can for at least 2 minutes before use. The surface must be dry and free from grease. Remove flaking rust and loose old
paint. Spraying distance: 15-25 cm. On non-primed and painted surfaces, apply one spray pass and allow it to start drying.
Then spray the entire surface evenly (min. 60 µm dry coat thickness). To increase the gloss level by approx. 30 % and improve
resistance to petrol, it can be painted after 15 minutes of flash-off time (gloss effect spray).
CL01_3006110701, Rev: 0.357, State: 09. 02. 2024

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each applica-
tion. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

##keep##

Related products Art. no.

Replacement spray head For spray cans Round nozzle 0891 094
Replacement spray head For spray cans Fan nozzle 0891 095
Replacement spray head For spray cans Contour nozzle 0891 096

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 16

 SUPER RTV SILICONE

Super RTV silicone adhesive and sealing compound

High-quality adhesive and sealing compound for

use in industry and the automotive sector.
Excellent resistance to chemicals
• Can also be used in critical areas in which the seal comes
into contact with various liquids
• Outstanding resistance to engine oil and transmission oil,
refrigerant and anti-freeze agent
Non-acidic hardening system
• Non-corrosive, therefore has no negative impact on elec-
tronic components and on lambda probes
Sealant in compressed-air can
Illustration only
• Easy to dispense without additional aids
• The fine beads allow the product to be applied uniformly

Contents 200 ml
Chemical basis Neutral crosslinked silicones, oxime-based

Min./max. tempera- Max. short-term

Colour Range of applications Art. no. P. Qty.
ture resistance temperature resistance
Water pumps, Oil pumps,
Front cover, Camshaft
Black -60 to 260 °C 300 °C bearing cover, Thermostat 0893 331 1 1/12
housing, Oil pans, Transmis-
sion cover, Sunroof, Doors
Oil pumps, Front cover,
Camshaft bearing cover, Oil
pans, Transmission cover,
Red -60 to 315 °C 370 °C 0893 331 2 1/12
Exhaust manifold, Exhaust
flange, Cover and flange on
engines, Intake area
Oil pans, Valve cover, Rear
axle housing, Crankshaft
Blue -60 to 260 °C 300 °C 0893 331 3 1/12
housing, Differential housing,
Camshaft bearing cover
Sealing of accumolators,
Sealing of halogen lamp,
Transparent -60 to 260 °C 300 °C 0893 331 4 1/12
Sealing of vehicle body
parts, Sealing of transformer
CL01_3003070805, Rev: 0.370, State: 02. 11. 2023

Water pumps, Oil pumps,

Front cover, Camshaft
bearing cover, Thermostat
Grey -60 to 260 °C 300 °C 0893 331 6 1/12
housing, Oil pans, Trans-
mission cover, Intake area,
Sealing of accumolators

Instructions
##keep##

##keep##

Optimum adhesion to dry, clean and dust-free surfaces. The old sealant must be removed in full from the surface.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 17

 Notice
When sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply
the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. After-
wards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5
minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before
each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing
conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this
service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting
deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
CL01_3003070805, Rev: 0.370, State: 02. 11. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 18

 CHEMICAL ANCHORmortar
Chemical injection PE1000
PURE EPOXY WIT-PE 1000

Pure epoxy mortar with a long processing time,

Chemical injection
ideal for large mortar
anchoring PURE
depths and EPOXY WIT-PE 1000
drilling
holes as well as high temperatures. For bonded
anchor,
Pure concrete
epoxy and
mortar post-installed
with rebar connec-
a long processing time,
tion with
ideal subsequent
for large mortaring
anchoring depths(REBAR)
and drilling
holes as well as high temperatures. For bonded
Two-component reactive resin mortar, pure
anchor, concrete and post-installed rebar connec-
epoxy
tion with subsequent mortaring (REBAR)
Individual fixing point in cracked and uncracked
Two-component reactive resin mortar, pure
concrete, seismic performance category C1 (M8
epoxy
to M30) and C2 (M12 to M30):
Individual fixinganchor
Anchor rod W-VI-A, point rod
in cracked
W-VD-A, and uncracked
standard threaded
concrete, seismic test
rod with acceptance performance
certificate 3.1,category C1 (M8
internal thread
to M30)
anchor and C2 (M12 to M30):
W-VI-IG
Illustration only
Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded
Post-installed rebar connection with subsequent
rod with acceptance test certificate 3.1, internal thread
mortaring
anchor W-VI-IG
Anchoring of threaded rods in natural stone 23.8,
Illustration only
Post-installed rebar connection with subsequent 29.4
(without approval/assessment)
mortaring
Anchoring of threaded rods in natural stone 23.8,
Type description WIT-PE 1000
(without approval/assessment) 29.4
Container Cartridge
Min./max. processing 0 to 40 °C/temperature in the anchorage
temperature/conditions ground during processing and hardening
Type description WIT-PE 1000
Min./max. ambient temper- -40 to 72 °C/after completely curing
Container
ature/Conditions Cartridge
process
Min./max.
Temperatureprocessing
resistance, 0 to 40 °C/temperature in the anchorage
temperature /conditions
long-term temperatures ground
24 °C during processing and hardening
Min./max.
max. ambient temper- -40 to 72 °C/after completely curing
ature / Conditions
Temperature resistance, process
Temperature resistance,
short-term temperatures 72 °C
long-term
max. temperatures 24 °C
max.
Shelf life from production/ 24 Month/cool and dry storage area,
Temperature
conditions resistance, 5°C to 25°C
short-term
Approval temperatures 72 °C
ETA-19/0542, ETA-19/0543
max.
Chemical basis Pure-Epoxy, styrene free
Shelf life from production/ 24 Month/cool and dry storage area,
Colour Grey
conditions 5°C to 25°C
Approval ETA-19/0542, ETA-19/0543
Chemical basis Pure-Epoxy, styrene free
State: 09. 11. 2023

Contents Suitable application gun Art. no. P. Qty.

Colour Grey
Battery-powered application gun 585ml, Appli-
440 ml cation gun MULTI, Pneumatic application gun 5918 605 440 12
585ml, HandyMax 585 ml
11. 2023

Contents Suitable application gun Art. no. P. Qty.

0.478,

Battery-powered application gun 585ml, Appli-

Rev:09.

440
585 ml cation gun MULTI, Pneumatic application gun 5918 605 440
585 12
1/12
Rev: 0.478, State:

585ml, HandyMax 585 ml

CL01_4502010408,

Battery-powered application gun 585ml, Appli-

585
1400mlml cation gun application
Pneumatic MULTI, Pneumatic application gun 5918 605 585
gun 1400ml 140 1/12
5
585ml, HandyMax 585 ml
CL01_4502010408,

1400 ml Pneumatic application gun 1400ml 5918 605 140 1/5

Adolf Würth GmbH & Co. KG, 74650 Künzelsau

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 19

 Details/Application
• Suitable for attaching metal structures, metal profiles, wooden structures, brackets etc.
• Suitable for structural expansions, ceiling and wall attachments, expansion of load-bearing structures, reinforcement of load-
bearing structures, attachment of balconies and canopies, sealing of temporary openings and “forgotten” reinforcement bars

Bonded anchor base material: Concrete

Create the drill hole Make the drill hole using Clean the drill hole: Cut anchor rod to length Use WIT-VL 16 Cut off Discard the first section Fill injection mortar starting Press in anchor rod up
Würth hollow drill bit, Blow out 2x with oil-free and mark the desired mixer at position “X” of mortar (until the mortar from base of drill hole to drill hole base while
there is no need for hole compressed air (min. 6 insertion depths is uniformly coloured - turning slightly
cleaning bar)/brush out 2x/blow approx. 10 cm)
out 2x with oil-free
compressed air (min. 6
bar)

Visual check of mortar Load can be applied to Install component, apply

volume, embedment the reinforcement bar after installation torque
depth mark observing the curing time

Bonded anchor base material: Concrete

2x 2x 2x

Create the drill hole Make the drill hole using Clean the drill hole: Place the embedment Screw mixer onto cartridge Use WIT-VL 16 Cut off Discard the first section Mount injection equip-
Würth hollow drill bit, Blow out 2x with oil-free depth mark on the rod mixer at position “X” of mortar (until the mortar ment, fill composite mortar
there is no need for hole compressed air (min. 6 and check the drilling is uniformly coloured - from bottom of drill hole
cleaning bar)/brush out 2x/blow hole depth approx. 10 cm)
out 2x with oil-free
compressed air (min. 6
bar),
CL01_4502010408, Rev: 0.478, State: 09. 11. 2023

Insert the reinforcement Visual check of the mortar Load can be applied to
bar until it reaches the volume, observe maximum the reinforcement bar after
mark, turning slightly processing time observing the curing time

Proof of performance
• European Technical Assessment ETA-19/0542: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A,
anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, anchor with internal thread W-VI-IG), seismic
performance category C1 (M8 to M30) and C2 (M12 to M30)
• European Technical Assessment ETA-19/0543: Post-installed rebar connection with subsequent mortaring (REBAR)

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 20

 ##keep##

Related products Art. no.

Mixer nozzle WIT-MX for Pure Epoxy WIT-PE 1000, Concrete Multi WIT-UH 300 and Pure Epoxy Basic WIT-PE 510 injection
0903 488 103
systems
Hand slide valve 0699 903 38
Pneumatic hose WIT-SDD 0699 903 7
Pneumatic hose WIT-SDD 0699 903 13
Blow gun 0714 921 4
Machine chuck SDS-plus M8 SDS-plus M8 for REBAR cleaning brushes and WIT-RB cleaning brushes (Concrete Multi WIT-UH 300
0903 489 101
and Pure Epoxy WIT-PE 1000)
Handle For cleaning brushes 0903 489 103
Extension For cleaning brush with M8 connecting thread 0903 489 111
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter 10 mm 0903 489 510
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter 12 mm 0903 489 512
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter 14 mm 0903 489 514
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter 18 mm 0903 489 518
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter=22 mm 0903 489 522
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter=28 mm 0903 489 528
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB Nominal drill hole diameter 35 mm 0903 489 535
Mixer nozzle extension WIT-MV 0903 420 004
Mixer extension WIT-MV, flexible 0903 488 123
Mixer nozzle extension WIT-MV 0903 488 122
Washer system hose 0895 812
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 14 mm 0903 488 055
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 16 mm 0903 488 056
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 18 mm 0903 488 057
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 20 mm 0903 488 058
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter=22 mm 0903 488 062
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 25 mm 0903 488 059
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter=28 mm 0903 488 052
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 32 mm 0903 488 053
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 35 mm 0903 488 060
##keep##
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles Nominal drill hole diameter 40 mm 0903 488 061
Related products
Designation Art. no.
for
5918 605 140 Pneumatic 2C application gun WIT 0891 015
Application gun WIT-Multi 0891 003 105
Handymax application gun, 585 ml 0891 018
5918 605 440
Cordless application gun WIT 0891 003 585
Pneumatic 2C application gun WIT 0891 017
Application gun WIT-Multi 0891 003 105
Handymax application gun, 585 ml 0891 018
5918 605 585
Cordless application gun WIT 0891 003 585
Pneumatic 2C application gun WIT 0891 017
CL01_4502010408, Rev: 0.478, State: 09. 11. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 21

 THREADLOCKER

Medium-strength screw retainer

Removable screw retainer and sealing com-

pound – one-handed dispensing system
Medium-strength bonding
Can be removed using normal tools
Can also be applied to stainless steel and passi-
vated surfaces
No “accelerator” or “activator” required
Excellent media and thermal stability
Universal products with a wide range of application
Prevents detachment, e.g. through vibration and
shock loads
No unwanted locking problems such as with mechanical
screw retainers, for example
High resistance Illustration only
Resistant to a large number of bases, gases, solvents, oils
and fuels (see resistance list)
Silicone-free, solvent-free and oil-free
DOS system:
• Practical one-handed operation thanks to the clever turn
lock
One hand always remains free.
• Continuously adjustable dispensing system
Dispensing can be adjusted to suit the application, and to keep
consumption and costs to a minimum.
• No residue material in dispensing neck
Costs optimised thanks to emptying with virtually no remaining
product

Chemical basis Dimethacrylic acid ester

Colour Blue fluorescent
Fully hardening/curing Exclusion of oxygen and contact with
conditions metal (copper or iron ions)
Suitable for max. thread M36
Max. gap-filling ability 0.25 mm
Min./max. initial strength 5-15 min
CL01_3005030202, Rev: 0.938, State: 09. 02. 2024

Min./max. functional
0.5-1 h
strength
Min./max. final strength 1 h-3 h
Min./max. processing
5 to 35 °C
temperature
Min./max. temperature
-55 to 150 °C
resistance
Shelf life from production/
18 Month/at room temperature
conditions

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 22

 Weight of content Art. no. P. Qty.
25 g 0893 243 025 1
50 g 0893 243 050 1
250 g 0893 243 250 1

Viscosity at 25°C Brookfield (RVT/RVT/HB)

5000-7000 mPas Spindle rpm: 1/20
1500-2500 mPas Spindle rpm: 3/20

Details/Application
For medium-strength retaining, fixing and sealing of threaded connections such as screws, stud bolts, nuts and threaded plugs,
which are supposed to be detached again with normal tools. The medium-strength threadlocker is for use in the automotive and
commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construc-
tion, and electrical and electronics construction.

Instructions
##keep##

##keep##

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and
grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.
For more information, please refer to the technical data sheet.

Proof of Performance
CL01_3005030202, Rev: 0.938, State: 09. 02. 2024

Notice
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate
(Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 23

 The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each appli-
cation. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the
advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee
the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data
sheet!

##keep##

Related products
Designation Art. no.
for
Metal cleaner 7063 500 ml 0890 107 063
0893 243 025 Acetone cleaner for cleaning and degreasing parts of all kinds 0893 460
Tex-Rein cleaning cloth 150 PCS 0899 810
Metal cleaner 7063 500 ml 0890 107 063
0893 243 050 Acetone cleaner for cleaning and degreasing parts of all kinds 0893 460
Tex-Rein cleaning cloth 150 PCS 0899 810
Metal cleaner 7063 500 ml 0890 107 063
0893 243 250 Acetone cleaner for cleaning and degreasing parts of all kinds 0893 460
Tex-Rein cleaning cloth 150 PCS 0899 810
CL01_3005030202, Rev: 0.938, State: 09. 02. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 24

 ECOLINE CLEANING PAPER

ECOLINE cleaning paper

The all-rounder for the most common cleaning

tasks
• Highly absorbent
• Fits all common dispensers
• In various plies and widths
• Low lint
• High absorption capacity and tear-resistant
• Certified with the EU Ecolabel
Our products with the EU Ecolabel seal are resource-con-
serving and environmentally friendly. The EU Ecolabel seal
certifies the use of sustainable cultivation resources and
defines clear requirements for environmentally friendly Illustration only

processes throughout the entire production stage.

Material Cellulose FOR WIPING

Design Roles ware

Art. no. 0899 800 850 0899 800 773 0899 800 823 0899 800 290 0899 800 525
P. Qty. 2 2 2 2 2
Colour Blue Blue Blue White White
Number of sheets 500 PCS 1000 PCS 1000 PCS 2500 PCS
Number of plies 3 PCS 2 PCS 3 PCS 2 PCS 2 PCS
Sheet length x
36 x 38 cm 36 x 38 cm 36 x 38 cm 36 x 22 cm 30 x 22 cm
sheet width
Length of roll 180 m 360 m 360 m 504 m 750 m
Outer diameter 280 mm 290 mm 390 mm 380 mm 39 cm
Weight of roll 4870 g
Coating weight
52.5 g 35 g 53 g 35 g 35 g
per m2

Details/Application
The cleaning paper is suitable for cleaning surfaces in a range of sectors (vehicles, metalworking, kitchen construction). Soiling
such as oil and grease can be removed with the cleaning paper. Due to the high strength of the cloth, it can also be used to
clean coarse materials from surfaces, for example chips and edges.
CL01_3007110501, Rev: 0.966, State: 23. 10. 2023

Instructions
##keep##

##keep##

Clean the surfaces with cleaning paper. It is possible to increase the cleaning effect of the cloth by using Würth cleaning agents.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 25

 Proof of Performance

##keep##

Related products
Designation Art. no.
for
Cleaning paper stand 0899 800 606
0899 800 290
Table-top roll holder For cleaning paper 0899 800 609
Cleaning paper stand 0899 800 606
0899 800 525
Table-top roll holder For cleaning paper 0899 800 609
Cleaning paper stand 0899 800 606
0899 800 773
Table-top roll holder For cleaning paper 0899 800 609
Cleaning paper stand 0899 800 606
0899 800 823
Table-top roll holder For cleaning paper 0899 800 609
Cleaning paper stand 0899 800 606
0899 800 850
Table-top roll holder For cleaning paper 0899 800 609
CL01_3007110501, Rev: 0.966, State: 23. 10. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 26

 ADHESIVE LUBRICANT HHS® 2000

Adhesive lubricant HHS® 2000

Partly synthetic oil that is extremely resistant to

high pressures
• Eliminates squeaks and creaks and has excellent flow
and penetration performance, as well as good corrosion
protection.
• Highly adhesive lubricant that is not spun away when
used on turning and rotating parts
• Compatible with O-rings/X-rings and plastics. Neutral
behaviour on painted substrates.
• Resistant to splash water and salt water, weak acids and
bases
• Free from silicone, resin and acids

Chemical basis Hydrocarbon

Colour (Color) Yellowish
Smell/fragrance Oil
Density 0.742 g/cm³
Density conditions at 20°C
Min. temperature conditions -25 °C
Max. temperature condi-
180 °C
tions
Max. temperature resist-
200 °C
ance
Min. flashing point of active
300 °C
ingredient
Kinematic oil basis viscosity 1500 cSt
Silicone-free Yes
Acid-free Yes
Resin-free Yes
AOX-free Yes
Salt water, Weak lyes, Weak acids,
Resistance against
Splash
Container Can
Shelf life from production 24 Month

Oil basis Contents Art. no. P. Qty.

1/6/12
Mineral oil 500 ml 0893 106
/24
CL01_3008060303, Rev: 0.911, State: 12. 09. 2023

Synthetic mineral oil 150 ml 0893 106 1 1/12

Details/Application
Extremely high-pressure-resistant partly synthetic oil for universal lubrication and for high pressure loads.
Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins,
joints, hinges, reversing levers, lock strikers, drag link ends, slide rails, chain wheels, toothed racks, open gearwheels and much
more.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 27

 Resistance to high pressure loads Viscosity index

The HHS 2000 lubricating film remains active and does not tear off
despite the high pressure load and shearing motion of the base body.
Reliably separates the counterpart-body from the base body and thus
ensures optimum wear protection at higher pressure loads. This is only
possible for dirt-free lubricating points, which is why we recommend a
thorough and careful pre-clean with HHS Clean prior to application, art.

Instructions
##keep##

##keep##

Carefully and thoroughly pre-clean the lubrication points before each application. Shake the can before use, spray the parts and
let it take effect briefly.
After use, spray the spray head upside down until empty.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each applica-
tion. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
CL01_3008060303, Rev: 0.911, State: 12. 09. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 28

 TWIST DRILL BIT HSS DIN 338

Twist drill bit assortment DIN 338 HSS

Assembly drill for general, broad applications in

steel up to 850 N/mm2 strength and cast iron.
Quick drilling
• Web thinning ensure less friction during drilling and there-
fore less feed force needed.
• The optimized point grinding with short designed working
length enable quick drilling by using cordless and wired
drill at construction site and in assembly
Self-centering
The crosswise grinding ensures an excellent centering effect
even on domed surfaces, eliminating the need for center-
punching or piloting

Details/Application
Steel
CL01_7501030981, Rev: 0.219, State: 04. 01. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 29

HAND CLEANER PLASTIC FREE
Natural Hand Cleaner, Plastic-Free
Natural Hand Cleaner, Plastic-Free
Hand cleaner for medium to heavy soiling
with natural abrasive agents. For
Handd cleenasneerrsfyosrtemmed
isp airut.mntoo. 0
h8ea
9v1y
90s1
o il in g
with natural abrasive agents. For
•eCleans
disp nser shands
ystemthoroughly
art. no. of08oil,
91grease,
901 dirt, etc.
• Dermatologically tested
• Cleans hands
• Solvent andthoroughly of oil, grease, dirt, etc.
silicone-free
• Dermatologically
• pH-neutral tested
• Solvent and silicone-free
• Contains natural ingredients
• pH-neutral
• Does not contain any plastic exfoliating agents
• Contains natural ingredients
• Does not contain any plastic exfoliating agents

Contents 4L
Smell/fragrance Citrus
Contents
Colour 4L Beige
Smell/fragrance
Performance Citrus3 of 5 points
Colour
pH value Beige6.5
Performance 3 of 512points
Period of use after opening Month
pH value 6.5
Period
Aroft.use
no after
. 0opening
893 9012 0 Month
000
P. Qty.: 1 / 6
Art. no. 0893 900 000
Details/Application
P. Qty.: 1/6
Suitable for car, metal and wood workshops.
Details/Application
Suitable for car, metal and wood workshops.
Notice : If used intensively, the cleaner can lead to skin irritation.

Notice : If used intensively, the cleaner can lead to skin irritation.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before
each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing
conditions.
The usage Insofarare
instructions as recommendations
our free customer service
based on provides technical
the tests we haveinformation
conductedor acts
and as anonadvisory
based service, no
our experience; responsibility
carry out your ownis assumed by this
tests before
eachservice exceptWe
application. where theassume
do not advice any
or information
liability forgiven falls within
a specific the scope
application resultofdue
ourtospecified,
the largecontractually agreed service
number of applications or the advisor
and storage was acting
and processing
deliberately.
conditions. InsofarWe guarantee
as our consistent
free customer quality
service of ourtechnical
provides products.information
We reserveorthe right
acts as to
anmake technical
advisory changes
service, and carry out
no responsibility further development.
is assumed by this
CL01_0502020208, Rev: 0.479, State: 27. 03. 2024

service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting
deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
CL01_0502020208, Rev: 0.479, State: 27. 03. 2024

##keep##

Related products Art. no.

##keep##

Dispenser system 0891 901

Related products
Dispensing pump For 4000 ml bucket of hand cleaner Art. 0891
no. 901 1
Dispenser
Basic system
skin protection cream 0891 901 600 100
0890
Dispensing pump For 4000 ml bucket of hand cleaner 0891 901 1
Basic skin protection cream 0890 600 100

Adolf Würth GmbH & Co. KG, 74650 Künzelsau

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 30

 PRODUCT-SPECIFIC SPRAYER

Product-specific pressure sprayer, unfilled

Refillable empty pump spray bottle for easy

application of products from canisters or drums
• Break-proof, empty 1 litre container
• Easy opening owing to surface feel elements

Material PE - Polyethylene
Colour White, Red
Diameter 100 mm
Height 275 mm
Contents 1l

Illustration only

Suitable for active ingredient Art. no. P. Qty.

Assembly cleaner 1A 0891 503 006 1
Brake cleaner 0891 503 002 1
Cleaner for wheel 0891 503 003 1
Wheel rim cleaner premium 0891 503 004 1
Cleaner for workshop 0891 503 007 1
BMF cleaner 0891 503 008 1
Leak detector 0891 503 012 1
Lubricant for wood 0891 503 013 1
Rust remover Plus 0891 503 015 1

Resistance list
Pump spray Solvent
Acid-resistant Alkali-resistant
bottle resistant, 360°
0891 503 001
Art. no. 0891 503 030 0891 503 031
0891 503 360
Concentration
Acetic acid 5% ✗ ✓ ✗
Silica 100% ✓ ✓ ✗
Oxalic acid 100% ✓ ✓ ✗
Palmitic acid 100% ✗ ✗ ✓
Phosphoric acid 30% ✓ ✓ ✗
Acids
Phthalic acid 100% ✗ ✓ ✗
Nitric acid 10% ✓ ✗ ✗
Sulphuric acid 10% ✓ ✓ ✗
CL01_3007101503, Rev: 0.963, State: 16. 02. 2024

Citric acid 50% ✓ ✓ ✗

Citric acid 10% ✓ ✓ ✓
Amyl alcohol 100% ✓ ✗ ✓
Butanol 100% ✗ ✗ ✗
Ethanol 100% ✗ ✓ ✗
Alcohols
Isopropanol 100% ✓ ✓ ✓
Methanol 100% ✗ ✓ ✗
Propanol 100% ✓ ✗ ✓

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 31

 Resistance list
Pump spray Solvent
Acid-resistant Alkali-resistant
bottle resistant, 360°
0891 503 001
Art. no. 0891 503 030 0891 503 031
0891 503 360
Concentration
Propane 100% ✓ ✗ ✓
Naphtha 100% ✗ ✗ ✓
Isooctane 100% ✗ ✗ ✓
Aliphatic hydrocar- n-decane 100% ✗ ✗ ✓
bons n-hexane 100% ✗ ✗ ✓
n-heptane 100% ✗ ✗ ✓
n-pentane 100% ✗ ✗ ✓
Petroleum 100% ✗ ✗ ✓
Benzene 100% ✗ ✗ ✗
Cyclohexane 100% ✓ ✗ ✓
Cyclohexanol 100% ✗ ✗ ✗
Aromatic hydrocar-
Limonene 100% ✗ ✗ ✓
bons
Naphthalene 100% ✗ ✗ ✓
Toluene 40% ✗ ✗ ✓
Xylene 100% ✗ ✗ ✓
Petrol 100% ✗ ✗ ✓
Diesel 100% ✗ ✗ ✓
Crude oils and deriv-
Kerosene 100% ✗ ✗ ✓
atives
Mineral oil 100% ✗ ✗ ✓
White spirit 100% ✗ ✗ ✓
Acetone 100% ✗ ✓ ✗
Acetone mixture,
Up to 3% acetone ✗ ✗ ✓
solvent-based
Ammonia 10% ✗ ✓ ✗
Calcium hydroxide 100% ✓ ✓ ✓
Alkalines and Rim cleaner,
10% ✗ ✓ ✗
ketones extremely alkaline
Potassium
30% ✗ ✓ ✗
hydroxide
Sodium hydroxide 30% ✗ ✓ ✗
Sodium hydroxide 100% ✗ ✓ ✗
Turpentine oil 100% ✗ ✗ ✓
Please observe our guidance notes on resistance specifications
• Exact resistance cannot be guaranteed due to interactions
• Consultation and testing are recommended
• Only a recommendation can be given and no guarantee
• Liability only after live tests by manufacturer
• Only valid if used correctly as specified in the operating instructions
CL01_3007101503, Rev: 0.963, State: 16. 02. 2024

The specifications do not apply to mixtures. Equipment not suitable for the dispensing of oil-containing
fluids.

Spare parts Art. no.

Replacement seal set For pressure sprayer 0891 599
Replacement nozzles For pressure sprayers 0891 599 0

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 32

 INDUSTRIAL CLEANING WIPES

Industrial Cleaning Wipes

For thorough and fast cleaning of most surfaces

without the need for water, soap or a brush.
NSF-certified.
• Ideal for mobile, every-day use
• Thorough and gentle at removing even the heaviest types
of soiling such as oils, greases, adhesives, paints, tar and
lubricants
• Clean tools, surfaces and hands with a single product
• Cleans hands and leaves a pleasant scent
• Cost savings as the cleaner can be rinsed from the cloth
using water

Smell/fragrance Orange
Shelf life from production 30 Month
Number of cloths 90 PCS
Width x length 27 cm x 32 cm
Container Bucket

Art. no. 0890 900 90

P. Qty.: 1 / 6

Details/Application
Thorough and gentle at removing even the heaviest types of soiling such as oils, greases, adhesives, paints, tar and lubricants.
• Tool cleaning
• Surface cleaning
• Hand cleaning
CL01_3007111602, Rev: 0.844, State: 21. 02. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 33

 Instructions
##keep##

##keep##

Remove the damp cloth from the re-sealable container and remove dirt by gently rubbing the surface affected.

Proof of performance
NSF-certified: Nonfood Compounds Program Listed C1 (150555).

Notice
Not suitable for high-gloss surfaces such as car paints and transparent plastics, e.g. visors, plexiglass panels.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each applica-
tion. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

##keep##

Related products Art. no.

Holder For universal cleaning cloths 0963 81 839
CL01_3007111602, Rev: 0.844, State: 21. 02. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 34

 ZINC RICH WELD PRIMER

Zinc Rich Weld Thru Primer

Zinc Rich Weld Thru Primer protects steel from

corrosion by sacrificial or galvanic action. When
applied to metal surfaces prior to mig or spot
welding, the zinc melts and fuses to the surface
of the steel, reducing the formation of rust and
rust creeping.
98 - 99% pure zinc content
• Heat resistant up to 490ºC (914ºF)
• Good electrical conductivity
• Special epoxy resin for better adhesion to metal
• Adheres reliably to all metals
• Long term cathodic protection for all metallic surfaces

Notice
DO NOT apply filler after application
CL01_3006111007, Rev: 0.211, State: 11. 08. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 35

 RUST REMOVER ROST-OFF PLUS

Rust remover Rost-Off Plus

High-quality rust remover, lubricating effect —

owing to the latest additive technology (OMC 2
technology)
High capillary activity
Optimum creeping properties ensure outstanding rust pene-
tration and extensive rust removal
Contains liquid, highly effective, organic molyb-
denum compound OMC2
• In contrast to products which contain solid lubricants,
such as MOS2, OMC2 does not precipitate out in larger
containers
• Friction is reduced
• Excellent lubricating effect by smoothing the metal surface
• Ensures permanent smooth running of connections
Corrosion protection additives for optimum
protection
Provides lasting protection against further corrosion
Resin and acid-free
Silicone-free
Compatible with rubber and plastic

Chemical basis Mineral oil

Contents Container Art. no. P. Qty.

5l Canister 0890 300 1
20 l Canister 0890 300 1 1
400 ml Aerosol can 0890 200 004 1/12

Details/Application
For loosening extremely rusty and oxidised threaded assemblies on cars, trucks, agricultural and construction machinery, aggre-
gates, and devices
CL01_3008050106, Rev: 0.374, State: 06. 02. 2024

##keep##

Related products Art. no.

##keep##
REFILLO®mat filling can 0891 881 2
Related products
Designation Art. no.
for
Filling system REFILLO® 0891 800 2
Tap DN 45 thread for 5 l and 10 l plastic canisters 0891 302 01
0890 300
Empty container with spray gun Rost Off Plus 0891 502 005
Compressed-air filling station Refillo® combi 0891 800 001
Filling system REFILLO® 0891 800 2
0890 300 1 Empty container with spray gun Rost Off Plus 0891 502 005
Canister coating ORSY®protec 0891 870 77

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 36

 OMC2 technology:
From a microscopic standpoint, all metal surfaces are rough and subject to constant wearing and loss of substance when exposed to friction.
OMC2 additives smooth the metal surfaces via a thermoplastic flow deformation by metallorganic connections. The flow deformation is regulated
individually, in accordance with the respective loading of the metal surface.
Improved surface quality thanks to metal surface sealant
Improved lubricating film
Reduced thermal loading
Decreased friction (up to 50 % in mixed friction area)
Reduced substance loss
Reduced wear
Longer service life

1. Smoothed surface

2. Original surface

3. Areas of plastic smoothing

Instructions
##keep##

##keep##

Spray the parts to be treated and allow to work briefly. For stubborn connections, repeat the application process and extend the
working time where necessary.

Notice
CL01_3008050106, Rev: 0.374, State: 06. 02. 2024

• Immediately remove excess material or splashes on sensitive and painted surfaces.

• Resin- and acid-free
• Silicone-free

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each applica-
tion. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 37

 SILICONE SPRAY

Silicone spray

Ensures long-lasting protection, preservation and

insulation of vehicle exterior and interior plastic,
rubber and metal parts; good lubricating proper-
ties
• Plastic parts retain a high-gloss finish and do not become
brittle
• Rubber parts are protected, do not become brittle and do
not freeze or stick
• Impregnated folding roofs and hoods
• Anti-static effect (dust-repellent)
• Protects electrical contacts against moisture
• Sliding roof and seat rails, seat belt rollers etc. run
smoothly
• Prevents squeaks and creaks between dissimilar materials,
e.g. metal/plastic etc.
• Serves as an installation aid, e.g. for hose connections
• No staining

Chemical basis Mineral oil

Min./max. temperature
-5 to 40 °C
conditions

Shelf life from produc-

Contents Container Density/conditions Art. no. P. Qty.
tion
5l Canister 24 Month 0.74 g/cm³/at 20°C 0893 221 05 1
20 l Canister 12 Month 0.735 g/cm³/at 20°C 0893 221 520 1
500 ml Spray can 24 Month 0.61 g/cm³/at 20°C 0893 221 1/12/24

Details/Application
For bumpers, protective strips, plastic rails and guides, door and sealing rubbers, rubber cuffs and hoses.

Notice
Not suitable for lubricating metal/metal constructions.
CL01_3007150102, Rev: 0.359, State: 26. 01. 2024

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before
each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific applica-
tion result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service
except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliber-
ately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

##keep##

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 38

 Related products
Designation Art. no.
for
Tap DN 45 thread for 5 l and 10 l plastic canisters 0891 302 01
Plastic tap DN 60 connection For plastic canisters with DN 60 connection for 20 L/25 L and 60 L 0891 302 03
0893 221 05 Filling system REFILLO® 0891 800 14
REFILLO®mat filling can 0891 881 12
Compressed-air filling station Refillo® combi 0891 800 001
Tap DN 45 thread for 5 l and 10 l plastic canisters 0891 302 01
Plastic tap DN 60 connection For plastic canisters with DN 60 connection for 20 L/25 L and 60 L 0891 302 03
0893 221 520 Filling system REFILLO® 0891 800 14
REFILLO®mat filling can 0891 881 12
Canister coating ORSY®protec 0891 870 77
CL01_3007150102, Rev: 0.359, State: 26. 01. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 39

PRODUCT
CATALOGUES

REQUEST ONE
FROM YOUR SALES
REPRESENTATIVE
TODAY.

40
 PIAS WING-TYPE DRILLING SCREW

pias® wing-type drilling screw, flat countersunk milling head with AW drive

Steel, Ruspert®-coated (grey), AW drive. The self-

drilling screw with up to 50% time saving when
fastening wood to metal sub-structures
Corrosion protection
Approx. 500 hrs. no base metal corrosion in accordance
with DIN EN ISO 9227 — NSS
AW drive system
• Enhanced torque transmission
• Longer life
• Optimum centring
• Better mounting output thanks to fatigue-free screwing
in; the required contact pressure for transmission of the
torques is considerably lower
• Largest possible contact surface of bit in screw drive
• Even force distribution prevents damage to the
surface-protection coating and therefore ensures better
resistance to corrosion

Nominal diameter (d) 6.3 mm

Head diameter (dk) 20 mm
Drill tip length (lp) 13 mm
Other standard Company standard
Material Steel
Surface Flake zinc grey
Head type Disc countersunk head with milling ribs
Internal drive AW30
Thread type Self-tapping screw thread
Min. recommended
2 mm
substructure thickness
Max. material thickness to
be drilled through (metal) 6 mm
(lU)
Min./max. recommended
800-1200 rpm
installation speed (idling)
RoHS-compliant Yes

Length (l) Max. attachment thickness (lB) Art. no. P. Qty.

CL01_3502021007, Rev: 0.310, State: 22. 02. 2024

55 mm 33 mm 0219 063 55 500

65 mm 43 mm 0219 063 65 250
80 mm 58 mm 0219 063 80 250

Can be stored in ORSY® system

Details/Application
For use with hard and soft woods

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 41

 Functionality:
1. Force feeding of the screw is prevented by the wings drilling out the wood
2. The core hole is drilled into the substructure. The wings break off upon contact with the metal
3. The first few turns of the screw cut the thread, the remainder of the screw then screws into the thread

Instructions
##keep##

##keep##

• Force feeding of the screw is prevented by the wings drilling out the wood
• The core hole is drilled into the substructure. The wings break off upon contact with the metal
• The first few turns of the screw cut the thread, the remainder of the screw then screws into the thread

Notice
• Wing-pias screws must be appropriately tested for usability for each application case. Only install using application tools with
a depth stop and claw coupling.
• The maximum attachment length is calculated as follows: Wood thickness and surface thickness lU = max. attachment thickness
lB
• Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
• The use of impact screwdrivers is not permitted
• Drilling screws must be attached perpendicular to the surface of the component

Drilling screws may only be used where dampness is not to be expected.

For connection elements with a construction permit, the permit, and in particular Part 2 “Special regulations”, must always be observed.

##keep##

Related products Art. no.

AW® bit 0614 523 0
CL01_3502021007, Rev: 0.310, State: 22. 02. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 42

 INDUSTRY CLEANER

Industry Clean cleaner

High-quality special cleaner for removing adhe-

sive tape residue, labels and film stickers as well
as stubborn dirt. NSF-certified
Effective
• Easy removal of adhesive residues, labels and adhesive
tapes
• Stubborn dirt such as wax, rubber abrasion, silicone resi-
dues, permanent marker, oil and grease are loosened
Gentle on materials, delicate surfaces such as
aluminium, brass and stainless steel are not
damaged
User-friendly
• No unpleasant odours for users and the environment.
• Fast and effective cleaning.
Illustration only
Acetone-, silicone- and AOX-free

Colour Transparent
Chemical basis Special benzine with D-limonene
Smell/fragrance Characteristic
Shelf life from production/
24 Month/below 25°C
conditions

Contents Art. no. P. Qty.

5l 0893 140 05 1
500 ml 0893 140 1/12

Details/Application
Cleans machine parts, plastic parts and metallic surfaces of adhesive residues. Also suitable for removing protective preserva-
tives e.g. on brake discs.
CL01_3007070201, Rev: 0.411, State: 26. 01. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 43

 Proof of performance
NSF registered, class K3, reg. no. 149620, 149621

Notice
Prior to treatment, check rubber and plastic parts for compatibility in an invisible location. Paints may be attacked.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each appli-
cation. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result.
Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except
where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We
ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

##keep##

Related products
Designation Art. no.
for
0893 140 Rubber Eraser 0585 91
REFILLO®mat filling can 0891 881 16
Industry Clean Refillomat 0893 140 520
REFILLOmat filling system 0961 891 023
0893 140 05
Rubber Eraser 0585 91
Tap DN 45 thread for 5 l and 10 l plastic canisters 0891 302 01
Pressure sprayer Solvent-resistant 0891 503 001
CL01_3007070201, Rev: 0.411, State: 26. 01. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 44

 ANTI SEIZE HSP 1400

High-temperature lubricant paste HSP 1400

Grey, metal-free lubricant paste that reduces

wear, reliably separates and provides outstan-
ding corrosion protection.
• For universal use, supple and highly adhesive
• Ensures ease of movement and minimal wear thanks to
high pressure load capacity
• Prevents corrosion, seizing and burning on
• Ensures uniform loosening of screw connections, ideal as
separating paste for stainless steel screw connections
Safe for health
Non-toxic, no metallic pigments and free from graphite, MoS
2 and additives containing sulphur

Silicone-free

Contents 300 ml
Mixed synthetic mineral oil with organic
Chemical basis thickener and white solid lubricant combi-
nation
Colour Grey
Min./max. temperature
-40 to 1400 °C
conditions
Shelf life from production 24 Month

Art. no. 0893 123

P. Qty.: 1 / 12

Details/Application
Ideal as separating paste for stainless steel screw connections, flange connections, pins, bolts and nuts, all kinds of splined shafts
and joints, moving brake parts (not for friction surfaces), crimped connections for journal and roller bearings, flywheels and
impellers, heavy-duty stroke spindles, guide slide bearings, guiding ways, pillar guides etc.
CL01_3008080203, Rev: 0.352, State: 26. 01. 2024

Splined shafts and joints of all kinds Sliding and rolling bearings, impellers and Operational readiness
High pressure load capacity ensures smooth impellers
Protection of edges from wear and seizing
running and minimal wear Destruction-free pressing in and out.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 45

 Brake linings Press connections for slide guides, bed rails, Shut-off valves, taps, slide valves
Prevents corrosion and seizing of disc brake column guides Smooth movement of adjustment spindles.
pads and deposits being burnt on Even, jerk-free movements even at low speeds. Uniform tightening torques and destruc-
Prevents squeaking and wear Emergency running lubrication for additional tion-free dismantling of screw connection.
lubrication with grease or oil.
Protected against moisture

Brake parts, chucks, heavy clamped connec- Flange connections, pins, screws, bolts and
tions nuts
Ensures high clamping forces Ensures even tightening torques due to low
Ensures uniform tightening and loosening dispersion of the friction values
Highly adhesive, water-resistant lubricating Non-destructive disassembly even after long
film temperature exposure
Prevents seizing, e.g. with stainless steel
screws

Instructions
##keep##

##keep##

Cleaning surfaces of all types of residues (oxide, paint and scale layers, old lubricants). Mechanical action (wire brush) and/
or using a cleaner recommended. Thin-film lubrication of threads and surfaces exposed to loads: Apply evenly with a brush or
spray over the entire surface. Do not use like grease.

Proof of performance
NSF H2 registered (no.: 150178)
CL01_3008080203, Rev: 0.352, State: 26. 01. 2024

Notice
Not suitable for lubricating bearings. Contains no metallic pigments and is free of MOS2 and sulphur-containing additives.

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 46

 REDLINE SERIES FLAR DISC

Flap disc for steel and stainless steel Red Line

The robust flap disc with high performance

values. Used to grind edges and surfaces,
dressing and smoothing, deburring and for weld
seam processing.
• Optimum grinding capacity with long service life
• High break resistance
• Meets the maximum safety requirements in accordance
with the EN13743 European standard
• Calcined alumina abrasive cloth
• Glass fabric backing disc

Details/Application
Used to grind edges and surfaces, dressing and smoothing, deburring and for weld seam processing.

Proof of performance
EN13743
CL01_7506020135, Rev: 0.378, State: 01. 02. 2023

Adolf Würth GmbH & Co. KG, 74650 Künzelsau 47

 THE WÜRTH
APP
POCKET SIZED POWER

Technical information
• Mobile ordering
• SDS access
• Available 24/7

And more!

SCAN TO DOWNLOAD THE WÜRTH APP TODAY!

Download the Wurth app today to access premium
functions and purchase products with ease.
48
Würth New Zealand Limited
Head Office Auckland: 99 McLaughlins Road, Wiri
Christchurch: 17 Syd Bradley Road, Yaldhurst
Wellington: 493 Hutt Road, Alice Town
Mt Maunganui: 34 Newton Street, Mt Maunganui

P: 0800 683 040 | E: [email protected] | W: www.eshop.wurth.co.nz

Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors.