Quote

Quote number: 4917417

Date: 25/02/2024
1/26

Al Watania Gypsum
Co. Ltd
Mohammed Imtiyaz Ahmed

Quote no 4917417
25/02/2024
 Quote
Quote number: 4917417
Date: 25/02/2024
2/26

Contact: Mohammed Imtiyaz Ahmed

Company: Al Watania Gypsum Co. Ltd
Address:

Phone: +966 508778672

Email: [email protected]

Dear Mohammed Imtiyaz Ahmed

Thank you for your recent enquiry. Further to our discussions, please find enclosed our
quotation as per your requirements.

We trust the enclosed information is of interest, and look forward to hearing back with your
comments. If you require any further information on this or any of our products and services,
please do not hesitate to contact me.

Mohammed Yahya
[email protected]

Atlas Industrial Equipment Co. – Atlas Copco Saudi Arabia

City Address Phone / Fax: Email: [email protected]
Jeddah 21462 P. O. Box 7330 0126933357 / 0126932892 Website: http://www.atlascopco.com.sa/saus
Riyadh 11421 P. O. Box 967 0112301133 / 0112310820
Al Khobar 31952 P. O. Box 4896 0138824440 / 0138827606
 Quote
Quote number: 4917417
Date: 25/02/2024
3/26

Company Presentation
Atlas Copco is a world-leading provider of sustainable productivity solutions. The Group
serves customers with innovative compressors, vacuum solutions and air treatment systems,
construction equipment, power tools and assembly systems. Atlas Copco develops products
and services focused on productivity, energy efficiency, safety and ergonomics.

The group is based in Stockholm, Sweden with customers in more than 180 countries.

In 2019, Atlas Copco had revenues of BSEK104 (BEUR 10) and at year end about 39 000
employees.

Compressor Technique

We provide compressed air solutions;

industrial compressors, gas and process
compressors and expanders, air and gas
treatment equipment and air
management systems. The business
area has a global service network and
innovates for sustainable productivity in
the manufacturing, oil and gas, and
process industries. Principal product
development and manufacturing units
are located in Belgium, the United
States, China, India, Germany and Italy.

Atlas Industrial Equipment Co.

For over 30 years Atlas Copco has had a direct presence in Saudi Arabia and Kuwait handing
the sales, service and marketing of industrial gas and air compressors, blowers, dryers and
filters, compressor parts & service and vacuum pumps. Atlas Copco customers are supported
by a nationwide sales, distribution, and service network, with branches located in Jeddah,
Riyadh, Al-Khobar and Safat (Kuwait) to ensure that products are running at maximum
efficiency and minimum downtime at our customers' sites.

For more information, please visit www.atlascopco.com/en-sa (Saudi Arabia)

www.atlascopco.com/en-kw (Kuwait)
 Quote
Quote number: 4917417
Date: 25/02/2024
4/26

Contents

Company Presentation 3

Price Summary 5

Payment & delivery conditions 6

Product Description: GA 55+, GA 75+, GA 90 Pack 7

Product Description: FX 5-300 15

Product Description: Filters UD+, DD+, DDp+, PD+, PDp+, QD+ 20

TERMS & CONDITIONS 23

 Quote
Quote number: 4917417
Date: 25/02/2024
5/26

Price Summary
UNIT PRICE TOTAL PRICE
S.N DESCRIPTION QTY
(SAR) (SAR)

ATLAS COPCO AIR COMPRESSOR

Model: GA 55+ Pack
Oil Injected Screw Type, Fixed Speed, Air cooled,

• Free Air Delivery 180 l/s (648 m3/h) @ 9.1 bar g

1. 2 120,000.00 240,000.00
• Max working pressure: 9.1 bar g
• Electrical Supply: 380 V, 3ph , 60 Hz
• Intalled Motor Power: 55kw – 75hp
MADE IN BELGIUM

ATLAS COPCO AIR DRYER

Model: FX 300

2. • Capacity : 300 l/s (1080 m3/h) 1 36,000.00 36,000.00

• Max working pressure : 14 bar
• Pressure dew point : +3 C

LINE AIR FILTER

Model: UD 180 +
3. UD+ filter is coalescing type line air filter to filter water and
1 9,000.00 9,000.00
oil condensate, the downstream oil aerosol content of the
filter is 0.0009 mg/m³.
ATLAS COPCO AIR RECEIVER
Model: LV3011

4. • Capacity: 3000 liters 1 28,000.00 28,000.00

• Max allowable pressure: 11 bar
• Pressure gauge and safty valve included

5. Automatic Condensate Drain WD 80 1 1,300.00 1,300.00

Grand Total (excl VAT) SAR SAR 314,300.00

 Quote
Quote number: 4917417
Date: 25/02/2024
6/26

Payment & delivery conditions

Startup/ Commissioning of compressors is included.

Commissioning Any civil, electrical, piping works are not included in
our scope of supply.
Standard Warranty
Atlas Copco equipment is warranted against
Warranty defective workmanship and faulty material for 12
months after delivery.
Payment Terms 1. 50% Advance payment.
2. 50% before delivery.
Quotation Expiry Date 15 days from quote date

Delivery Period 18 -24 working weeks from payment date.

Delivery Terms Free Delivery to your site

TAX All prices are excluding VAT & Taxes and in case of
any tax changes it will be carried by the customer
 Quote
Quote number: 4917417
Date: 25/02/2024
7/26

Product Description: GA 55+, GA 75+, GA 90 Pack

ATLAS COPCO OIL INJECTED SCREW COMPRESSOR

General Description
The GA 55+-90 is a state-of-the-art air- or water-cooled, silenced, rotary compressor with
extended monitoring capabilities. They offer a solid free air delivery in the industry, as well as
a competitive specific energy requirement. The compressor package includes a direct driven,
superior rotary screw compression element, driven by a high efficient, totally enclosed fan
cooled motor, an integrated lubrication and cooling system and integrated oil/water separator
built into a sound-insulated bodywork where noise levels are reduced. The silencing enclosure
allows the possibility to have a workplace compressor next to the point of use, minimizing the
installation costs and maximizing energy efficiency.

These compressors are equipped with the Atlas Copco Elektronikon® Graphic controller, to
control and monitor the compressor in the most efficient and reliable way.
 Quote
Quote number: 4917417
Date: 25/02/2024
8/26

Working principle

The air system

The air is drawn into the compressor through the inlet filter (1) and is compressed in the oil
injected rotary screw compression element (3) via the air intake
(load-unload) valve (2).
Lubrication fluid is injected into the air and the air / oil mixture passes through a non-return
valve (4) to the oil separator element (5).
The air then passes through a minimum pressure valve (6) and is cooled by an air- or water-
cooled after cooler (7).
The condensed moisture is removed by an integrated low-pressure drop moisture separator
and electronic condensate drain (9) and the compressed air is released to the main piping.

The oil system

Lubrication fluid contained in the oil receiver (5) flows under differential pressure to a
thermostatic bypass valve (13), air- or water-cooled oil cooler (12), high efficiency oil filter (14)
and oil stop valve (15) before being injected into the compression element (3) where it cools,
seals and lubricates the compression process.
The high efficiency oil filter (14) provides superior filtration compared to conventional filters
resulting in cleaner lubricant. The thermostatic bypass valve (13) ensures that the compressor
quickly reaches optimum operating temperature on start-up and maintains temperature during
periods of low load by allowing cold lubricant to bypass the oil cooler.
A low noise radial cooling fan (for air-cooled compressors) provides cooling air to the oil cooler
(12) and after cooler (7), ensuring satisfactory running temperatures as well as ventilating the
compressor enclosure.
 Quote
Quote number: 4917417
Date: 25/02/2024
9/26

Control system
To control these compressors, they are as standard equipped with a control cubicle containing:
• Fan motor overload relay(s)
• Motor Y/D starter with overload relay
• Transformers
• Plexiglas’s screen protection (in case copper bars are exposed)
• Start-stop button and isolator switch
• Elektronikon® Graphic control, regulation, safety and indication panel
• All wiring

Scope of supply

Designed for extreme running conditions

The GA has been designed to operate continuously in the extreme running conditions. All
rotating components are totally enclosed and protected against contamination to ensure long
and reliable operation. The compressor cooling system is sized to run perfectly in ambient
temperatures up to 46°C/115°F and high ambient versions up to 55°C/131°F.

Superior efficiency ensuring lowest operating costs

Designed to meet the highest levels of reliability, energy efficiency and air quality, the
compressor package includes following main features:

Heavy-duty oil filtration system

Assuring continuous uptime, the compressor is delivered with a 12-micron oil filtration system
for extremely clean oil. This ensures maximum reliability, long service intervals and lifetime.
Long lifetime of internal components. Long service intervals and easily accessible. Protecting
the compressor element, bearings and gears in the harshest operating conditions

Forced cooling of electrical cubicle

All cubicles are equipped with an electrical cubicle fan, including a filter, ensures the optimal
working temperature. Extra filtration eliminates environment dust in the electrical cabinet, to
increase the components lifetime. Extra cooling of the cubicle keeps the temperature low,
having the electrical components working in optimal temperatures
 Quote
Quote number: 4917417
Date: 25/02/2024
10/26

State-of-the-art rotary screw element

Patented, in-house designed oil injected rotary screw elements with the latest Atlas Copco
asymmetric rotor profile designed for a solid free air delivery at a competitive power
consumption. Extended lifetime. Precise oil injection for the highest performance at the lowest
element temperatures and minimal losses. Designed for low wear and tear, thanks to the
selection of high quality materials.

Most efficient transmission and drive system

All compressors are equipped with a Y/D starter, to lower transmission losses and smooth
starting.
• IE3Efficiencyclass (50Hz) with effect from 2015.
• NEMA PREMIUM Efficiency (60Hz).
Maintenance free, eXtreme duty gearbox drive resulting in lower drive end bearing temperature
and longer bearing lifetime. Direct gear-driven high performing element eliminating coupling
losses and maintenance. TEFC, IP55 ABB motor enclosure. Class F insulation, B temperature
rise.

Heavy-duty air inlet filter

To protect the compressor components from wear, even in the harshest environments, a
heavy-duty air inlet filter is integrated in the package, ensuring. Long lifetime of internal
components. Two steps of dust removal. Premium filtration of particles > 3µm with an efficiency
of 99.9%. Long service intervals. Equipped with differential pressure service indicator as
standard
 Quote
Quote number: 4917417
Date: 25/02/2024
11/26

Protecting your production process

The integrated high efficient cooling system with air/oil separator ensures a low residual oil
content in the, free of liquid condensate, compressed air. Separate oil- and after cooler, to
optimize the cooling for both media, resulting in low air outlet temperatures and less oil carry-
over. Electronic no-loss drain with feedback control, installed as standard to remove
condensate (no corrosion due to free condensate) effectively without wasting compressed air

Minimized installation work

The compressor packages are completely pre-wired and assembled to minimize the
installation work onsite. Easy ducting installation due to cool canopy concept (single cooling
air inlet/outlet location).
Integrated refrigerant dryer (Full Feature compressors), mechanically and electrically
connected (no extra power supply required)
 Quote
Quote number: 4917417
Date: 25/02/2024
12/26

ELEKTRONIKON

Elektronikon® Touch controller

Elektronikon® Touch with compressor visualization:

The next-generation Elektronikon® Touch controller provides you with an intuitive easy to use
touch screen controller. The Elektronikon® Touch controller additionally offers a great variety
of control and monitoring features that allow you to increase your compressor’s efficiency and
reliability thanks to the many embedded advanced control algorithms.

Elektronikon® Touch regulator module

The regulating system includes the Elektronikon® Touch controller to regulate, control and
monitor compressor operation. All Elektronikon® Touch control modules display and monitor
the following:
1. Compressor Status Indication
• Voltage on
• Automatic operation
• Service timer
• Compressor speed
2. Temperature, numerical readouts
• Element outlet
3. Pressure, numerical readouts
• Delivery air
4. Compressor Control
• Start / Stop
• Reset / Test
5. Hour meters
• Total running hours
• Total loading hours (in different speed zones)
6. Timers
• Programming compressor time-based start/stop commands
7. Service requirement indications
• Air filter
8. Compressor safety - warning indications
• High element outlet temperature.
• Electronic drain operation
• Sensor error
• High dew point
• Cooling water inlet temp (for water cooled versions)
 Quote
Quote number: 4917417
Date: 25/02/2024
13/26

• Cooling water outlet temp (for water cooled versions)

• Pressure drop over PD/DD filters (optionally)
9. Compressor safety - shutdown indications
• High element outlet temperature.
• Drive motor/fan motor overload
• Emergency stop
10. Digital output relays for remote monitoring (voltage free)
• Automatic operation / Manual operation
• General warning
• General shutdown
11. SMARTBOX for SMARTLINK*: Data Monitoring Program
• Remote monitoring system that helps you optimize your compressed air system and
save energy and costs.
• Provides a complete insight in your compressed air network.
• Anticipates on potential problems by warning you up-front.

Features & Benefits

Energy Savings
• Energy efficient and sate of the Art compression element
o Low energy required per compressed air flow
• Elektronikon® operating system
o Controller to ensure optimum efficiency, saver cycle, pressure regulation

Ease of installation
• Fully integrated & compact design that saves on installation cost
o Ensures compliance with your air requirements and makes the best use of your
valuable floor space.
o Rigid base frame with forklift slots
o Allows for easy installation in most working environments.

Highest reliability
• Robust Air Filter
o Offers long lifetime and high reliability for long service intervals and low
maintenance needs. Air filter is very easy to replace.
• Optimum cooling module for environments up to 46 C/ 115 F
o Ultimate reliability in the most extreme operating conditions, guaranteeing
extended lifetime
• Efficient (IE3 or NEMA Premium) main drive motor.
o Totally enclosed fan cooled motor insures reliability. Efficiency ratings at or above
premium regulations
• Maintenance free, eXtreme duty gearbox drive
o Longer bearing lifetimes at lowest maintenance cost.

Quite operation
• Sound insulated canopy
o Low noise level
 Quote
Quote number: 4917417
Date: 25/02/2024
14/26

o No separate compressor room required. Allows for installation in most working

environments
 Quote
Quote number: 4917417
Date: 25/02/2024
15/26

Product Description: FX 5-300

ATLAS COPCO QUALITY AIR SOLUTIONS

General Description

The FX range of refrigerant dryers offers a reliable, cost effective and simple solution to those
who need quality compressed air for their manufacturing processes. To avoid condensation,
and therefore all chance of equipment and end-product corrosion and damage, compressed
air needs to be dry — exactly what FX dryers are designed to do.

The FX dryer range is simple, yet robust and reliable. It is a no-frills range that relies on proven
technology, solid components and uncomplicated design; these features combined deliver a
constant dew point and reliable performance at any flow — in almost every manufacturing
application.
 Quote
Quote number: 4917417
Date: 25/02/2024
16/26

Working Principle

Refrigerant drying means that the compressed air is cooled, which allows a large amount of
the water condense and be separated. After cooling and condensing, the compressed air is
reheated to around room temperature so that condensation does not form on the outside of
the pipe system. This heat exchange between ingoing and outgoing compressed air, and as
such reduces the required cooling capacity of the refrigerant circuit.

Cooling takes place via closed refrigerant system. FX refrigerant dryer, a freestanding machine
that is used for dew points between +4°C and +3°C.
 Quote
Quote number: 4917417
Date: 25/02/2024
17/26

2. Refrigerant compressor
3. Maximum pressure switch
4. Fan control pressure switch
5. Condensed fan
6. Condenser
7. Capillary filter
8. Capillary tube
9. Hot gas bypass
10 Air inlet
11. Air-refrigerant heat exchanger
12. Air-air heat exchanger
13. Water separator
14. Automatic drain
1. Refrigerant separator 15. Air outlet
 Quote
Quote number: 4917417
Date: 25/02/2024
18/26

Scope of supply

Reliable Refrigerant Circuit

A closed circuit where the refrigerant flow is. Refrigerant compressor
brings gaseous refrigerant to high pressure and high temperature. To
ensure that only gaseous refrigerant only enters the compressor, a
refrigerant separator is installed before it. It also includes the condenser
that cools slightly the refrigerant, thus changes the refrigerant from gas
to liquid state. The refrigerant’s pressure should be reduced, thus
lowering its temperature and increasing its cooling capacity. The capillary
tube does this, and to protect from harmful particles, a Capillary filter is
designed for the FX. Finally, to regulate the amount of refrigerant passing
through the air-refrigerant heat exchanger, ensuring a stable pressure
dew point, and eliminating the chance of the condensate freezing.

Energy efficient Air Circuit

Hot saturated air enters the dryer and is cooled down by the outgoing air via air-air heat
exchanger. Reducing the temperature of the inlet air reduces the load on the refrigerant circuit.
The air-refrigerant heat exchanger transfers the heat from compressed air to the cold
refrigerant, forcing water vapour in the compressed air to condense. These condensates are
separated in the water separator, equipped with electronic drain. On the air outlet, the cooled
compressed air is reheated to prevent condensation into the pipe works, and now equipped
with a pressure dew point sensor
 Quote
Quote number: 4917417
Date: 25/02/2024
19/26

Features & Benefits

Energy Savings
Low energy consumption
• Improved heat exchanger, lowering the overall pressure drop
• Air-air heat exchanger lowers the load in the refrigerant circuit
• High efficiency refrigerant compressor

Reliable operation
No condensation in the factory pipe work
• Air-air heat exchanger, pre heats the cold compressed air
• Hot gas bypass, to prevent freezing at partial load
• Efficient water separator and automatic drain
• Pressure dew point sensor for an accurate pressure dew point measurement

Easy connectivity
Potential free contact, to allow remote monitoring on customer’s data control system
 Quote
Quote number: 4917417
Date: 25/02/2024
20/26

Product Description: Filters UD+, DD+, DDp+, PD+, PDp+,

QD+
ATLAS COPCO QUALITY AIR SOLUTIONS

General Description
Untreated compressed air can be contaminated by dust, water, and oil. In almost all
applications, contamination of the air supply can cause serious performance decline and
increase maintenance costs in terms of actual repairs and lost productivity. Therefore, filtration
is a crucial component
of your air system. Atlas Copco has developed filtration solutions that protect your air-powered
tools, your processes, and your final products. Our extensive offer includes different filter types
and a range of purity grades to meet your specific requirements. We design filtration solutions
to provide compressed air purity that meets or exceeds levels set forth by the International
Standard Organization. (ISO). Filters are tested in accordance with these standards:
• ISO 8573-1: 2010 Filtration Qualification
• ISO 8573-2 sampling and measuring OCO
• ISO 12500-1: inlet conditions for Oil Aerosol
• ISO 12500-3: inlet conditions for Dust

Among its filter ranges, Atlas Copco offers more than 200 filters that span from coalescing
filters for general purpose protection to active carbon filters used for removal of oil vapor and
hydrocarbon odors:
• UD+, a high-efficient coalescing filter type, combining DD+ and PD+ in one. Its unique
low density provides a 40% pressure drop reduction. The maximum oil carry-over of
this unique filter is 0,0009 mg/m³.

• DD+, a coalescing filter type, removes contaminants such as liquid water, oil aerosol
up to 0.1ppm and particle size down to 1 micron.

• PD+, a coalescing filter type, removes contaminants such as liquid water, oil aerosol
up to 0.01ppm and particle size down to 0.01 micron.

• DDp+ particulate filter type, dust protection, particle size down to 1 micron.

• PDp+ particulate filter type, dust protection, particle size down to 0.01 micron.

• QD+, activated carbon filter type, removes oil vapor, hydrocarbon odor contaminants.
 Quote
Quote number: 4917417
Date: 25/02/2024
21/26

Regardless of your quality air and filtration needs, Atlas Copco undoubtedly offers a filter that
is perfect for your application.

Working Principle
Particles in the air stream that pass through a filter can be removed in several different ways.
If the particles are larger than the openings between the filter material, they are separated
mechanically (“sieving”). This usually applies for the particles larger than 1mm. The filter
efficiency in this regard increases with the tighter filter material, consisting of fine fibers.
Particles smaller than 1mm are collected on the fiber material by three physical mechanism:

1. inertial impaction
2. interception
3. diffusion

Impaction occurs for relatively large particles and for high gas velocities.
Due to a large inertia of a heavy particle, it does not follow the streamlines but instead travels
straight ahead and collides with fiber. Interception occurs when a particle does follow the
streamline, but the radius of the particle is larger than the distance between the streamline and
the fiber perimeter. Particle deposition due to diffusion occurs when a very small particle does
not follow the streamlines but moves randomly across the flow due to Brownian motion. It
becomes increasingly important with smaller particle size and lower the velocity. Oil and water
in aerosol form behave like the other particles and can be separated using a coalescing filter.
In the filter, these liquid aerosols coalesce to larger droplets that sink to the bottom due to
gravity.
Depending on the purpose of the filter, we have designed different type of filter element:

1. Wrapped for wet particles: Wrapped media offer durability in wet and oil contaminated
environments. The patented Nautilus technology combines multiple wrapped layers to
ensure constant air quality in the harshest conditions.
2. Pleated for solid particles: Pleated technology is the preferred method to capture dry
particulate in compressed air. Over time, particles will clog the filter media. Pleated
surfaces have a larger surface area and therefore give you a longer filter service lifetime
as well as a lower pressure drop.
3. Macro-structured activated carbon: Macro-structured activated carbon has a larger
surface compared to the typical carbon dust filter media. Thanks to its supreme
adsorption capacity, it delivers a steady performance over a longer period.

Scope of Supply
 Quote
Quote number: 4917417
Date: 25/02/2024
22/26

1. Filter Cartridge:
• Wrapped for wet particles
• Pleated for solid particles 3 5
• Macro-structured activated carbon for oil aerosols

2. InPASS bypass (only for inPASS filter range)

• Build-in by-pass system
2
3. Differential pressure gauge
• Manual gauge (standard)
• Smart indicator (optional upgrade)
1
4. Non-stick float drain
• Automatic water removal

5. Housing 4
5
• Aluminum die casted head and bowl

Features & Benefits

Energy Savings
• Large flow capacity
• Low resistance to the air flow
• Considerable reduction of air turbulence and pressure drop

Reliable operation
• Proven durable design
• Dedicated filter element technology based on purpose
• High-performance stainless-steel filter cores
• Internal ribs to protect the element from damage and route oil droplets
• High performance automatic drain
• Anti-corrosive coating
• Patented drainage technology

Easy set-up and use

• Operational ease
• Easy monitoring via differential gauge or optional smart indicator
• Ribbed housing for easy removal of the bowl during maintenance
• Push on element
• Anti-re-entrainment barrier is color coded to easily indicate filter grade
• Bypass for the INpass range: internal bypass in the filter housing for easy
maintenance
 Quote
Quote number: 4917417
Date: 25/02/2024
23/26

TERMS & CONDITIONS

Article 1 Applicability
1.1 These Terms and Conditions shall apply to all offers and purchase agreements for goods and/or services (to be referred to as “items”)
in which Atlas Industrial Equipment (hereinafter to be referred to as “Atlas Copco”) acts as a provider or seller.
1.2 Deviations from these Terms and Conditions may only be agreed to in writing.

Article 2 Formation of purchase agreements

2.1 Offers
An offer by Atlas Copco shall be without obligation, unless otherwise expressly apparent from the offer.
2.2 Agreements
If the agreement is entered into in writing, it shall be formed on the date the contract is signed by Atlas Copco or the date the written
confirmation of the instruction is sent by Atlas Copco.
2.3 Acceptance by Atlas Copco may occur through any means of communication. This shall likewise apply if the order or instruction has
been placed by the buyer electronically. The order placed by the buyer may also be accepted by sending the items to the buyer.
2.4 By placing any follow-up order with Atlas Copco, the buyer shall accept the applicability of these General Terms and Conditions.

Article 3 Prices
3.1 The prices shall be in Saudi Riyal “ SAR “ or Any foreign currency requested by the customer, exclusive of VAT. If delivery in another
manner besides “ex warehouse” has been agreed on, the additional costs, including transport and insurance costs, shall be for the buyer’s
account.
3.2 If, after the date the agreement is formed, one or more cost factors increase – even if this occurs as a result of foreseeable
circumstances –, Atlas Copco shall be entitled to increase the agreed price accordingly. 3.3 Insofar as seaworthy packaging is not involved,
packaging shall be included in the price. Seaworthy packaging shall be charged separately. Packaging shall never be taken back.

Article 4 Delivery / Delivery period

4.1 For the interpretation of the delivery terms, the “most recent Incoterms” issued by the International Chamber of Commerce shall apply.
4.2 The delivery period shall commence on whichever of the following dates is the latest: a. the date the agreement is formed; b. the date
Atlas Copco receives the documents, information, permits and so forth necessary to carry out the instruction; c. the date the formalities
necessary for commencing the work are fulfilled; d. the date Atlas Copco receives what must be paid in advance under the agreement
before the work commences. If a delivery date or
week has been agreed on, the period between the date the agreement is formed, and the delivery date or week shall constitute the delivery
period.
4.3 The delivery period shall be based on the work conditions applicable at the time the agreement is concluded and the delivery on time
of the materials ordered by Atlas Copco to perform the work. If, through no fault of Atlas Copco, a delay occurs because of a change in
the aforementioned working conditions or because the materials ordered in time to perform the work are not delivered on time, the delivery
period shall be extended insofar as required in Atlas Copco’s judgment.
4.4 Unless expressly agreed otherwise, all delivery deadlines applied by Atlas Copco shall be target deadlines and shall therefore not be
strict deadlines.
4.5 The product shall be considered delivered with respect to the delivery period when it, if a check at Atlas Copco’s company has been
agreed on, is ready for the check and, in other cases, when it is ready for shipment, all of this after the buyer has been informed, and
without prejudice to Atlas Copco’s having to fulfil l its assembly and/or installation obligations, if any.
4.6 The delivery period shall likewise be extended by the duration of the delay arising as a result of the buyer’s failure to fulfil any obligation
ensuing from the agreement or failure to provide the assistance required of it regarding satisfying the terms of the agreement.
4.7 Except in the event of gross negligence on Atlas Copco’s part, the fact that a delivery period has been exceeded shall not entitle the
buyer to terminate the agreement in whole or in part. The fact that a delivery period has been exceeded – for whatever reason – shall not
entitle the buyer to, without court uthorization, perform work (or cause work to be performed) to carry out the agreement.
4.8 A contractual penalty imposed for the delivery period being exceeded must be deemed to replace any right of the buyer to
compensation. Such as penalty shall not be owed if the delivery period is exceeded because of force majeure or a reason referred to in
paragraphs 3 or 9 of this Article.
4.9 Subject to the provisions in this Article, Atlas Copco shall be entitled to suspend performance of its obligations vis-à-vis the buyer for
as long as the buyer has not fulfilled any or all of its payment or other obligations under any legal relationship existing with Atlas Copco.
This suspension shall apply until
the buyer has completely fulfilled its obligations vis-à-vis Atlas Copco. Any agreed delivery period shall be extended on account of the
suspension by the duration of the suspension.

Article 5 Transfer of risk and title

5.1 Immediately after the item is considered as having been delivered according to Articles 4.3 and 4.9, the buyer shall bear the risk for
all direct and indirect damage arising to or because of this item, except insofar as this is attributable to gross negligence on the part of
Atlas Copco. If, after receiving a notice of default, the buyer still does not take possession of the item, Atlas Copco shall be entitled to
charge the
buyer the costs of storing the item. In addition, from the delivery date to the date possession is taken, the buyer shall owe statutory interest
plus 3% on the entire outstanding amount, as long as payment of the purchase price as agreed on in the purchase agreement has not
occurred.
5.2 Subject to the provisions in the previous paragraph and in Articles 4.3 and 4.9, title to the item shall not be transferred to the buyer
until everything owed by the buyer to Atlas Copco on account of deliveries or work, including interest and costs, has been paid to Atlas
Copco in full.
5.3 At Atlas Copco’s request, the buyer must furnish alternative security for Atlas Copco, if, for whatever reason, Atlas Copco’s retention
of title is extinguished. This alternative security may consist of creating a nonpossessory pledge on all movable or other property referred
to in Article 5.1.
5.4 If appropriate, Atlas Copco shall be entitled to unimpeded access to the item. The buyer shall fully cooperate with Atlas Copco in order
to provide Atlas Copco the opportunity to assert the retention of title included in paragraph 2 by retrieving the item, including any
dismantling necessary in that regard.
 Quote
Quote number: 4917417
Date: 25/02/2024
24/26

Article 6 Payment
6.1 Payment shall occur after delivery, within 10 days after the invoice delivery date, unless partial payments on dates prior to the delivery
have expressly been agreed on. In such a case, payment shall be made after receipt of the invoice, before or on the agreed date. If
payment is not made on time, the buyer shall be in default by operation of law, without
any notice of default being required, and the buyer must pay statutory interest plus 3% on the amount owed for the duration of the default,
as well as all legal and other costs related to collection of its claim, with such other costs
reasonably being set at 15% of the outstanding amount, and without prejudice to Atlas Copco’s right to charge the buyer the costs actually
incurred, including any legal costs, if these exceed the amount so calculated. All payments must be made, without any deduction or set-
off, at Atlas Copco’s offices or to an account to be designated by Atlas Copco.
6.2 Unless it receives Atlas Copco’s express written permission, the buyer may not set off its payment obligation vis-à-vis Atlas Copco
against a claim of the buyer against Atlas Copco on any account whatsoever.
6.3 Atlas Copco shall be entitled to demand a pre-payment, cash payment or security for payment from the buyer at any time.

Article 7 Inspection, checking, testing

7.1 The items shall be inspected and tested carefully by Atlas Copco before delivery. If additional inspections, checks or tests have been
agreed on, Atlas Copco shall determine when these may be conducted and shall inform the buyer of this. The buyer or a representative
designated by the buyer shall be entitled to be present during the inspection,
check or test. The inspection check or test shall be conducted regardless of whether the buyer exercises its aforementioned right. The
results shall be provided to the buyer.
7.2 If the inspection, check or test must be per formed in whole or in part by one or more persons who are not employed by Atlas Copco,
and they do not appear at the aforementioned time, then the inspection, check or test shall be deemed to have taken place to the buyer’s
satisfaction, unless, within three days after learning of the nonappearance, the buyer states that the inspection, check or test must still
take place.
7.3 If and insofar as a check or inspection at Atlas Copco’s company has not been agreed on by Atlas Copco, the buyer shall check the
items within five days after delivery as referred to in Articles 4.3 and 4.9, unless a longer period has expressly been agreed on.
7.4 If this period has expired without a written and itemized report of justified complaints, the items shall be deemed to have been accepted.
7.5 Subject to Atlas Copco’s obligation to fulfil its warranty obligations, acceptance in accordance with the previous paragraphs shall
preclude any claim by the buyer regarding a breach of performance by Atlas Copco.
7.6 The presence of a defect shall never entitle the buyer to suspend or set off its payment obligations regarding goods delivered or
furnished, products, or work and/or services performed.

Article 8 Properties for use, warranties

8.1 The values of the properties for use as stated by Atlas Copco with regard to machinery shall be based on Atlas Copco’s experience
and, as such, shall be as Atlas Copco would expect under the conditions of Atlas Copco’s standard
tests. These tests shall be based on internationally accepted standards.
8.2 It shall be the buyer’s responsibility to determine whether the capacity and properties for use of the compressed-air machinery are
suitable and legally permissible for the use the buyer envisages. Atlas Copco shall not accept any liability whatsoever in this respect.
8.3 If, upon delivery, the machinery turns out to be incapable of achieving the values (subject to the tolerances stated with these values)
referred to under paragraph 1 of this Article, the buyer shall enable Atlas Copco to take such
measures within a reasonable period which allow these values to be satisfied. If this does not prove possible, the machinery shall, at Atlas
Copco’s option, either be replaced by machinery which does satisfy the agreed
values or be taken back by Atlas Copco with a refund of that portion of the purchase price which has already been paid, without Atlas
Copco otherwise being obliged to pay any compensation.
8.4 Subject to the provisions in the previous paragraphs, Atlas Copco shall not have any other obligation regarding the items delivered by
it besides those ensuing from its warranty obligation as described below and/or described in the warranty certificate delivered by it with
the items, provided the conditions contained therein are observed.
8.5 If, within a 12-month period after delivery as referred to in Article 4.3, machinery turns out to exhibit defects as a result of the use of
improper materials or defects in workman ship, these items shall, at Atlas Copco’s option,
be repaired or replaced, provided: a. the buyer or end user has followed Atlas Copco’s instructions regarding use,
maintenance and operation; b. the defect is not the result of incorrect or improper use or incompetent actions
performed on the items and c. Atlas Copco has been given written notice of the defects by the buyer or end user within five days of the
date on which the defects were discovered or reasonably could have been discovered.
8.6 The warranty shall likewise not encompass defects occurring in whole or in part because
of: a. use of the items in a manner other than the expected normal use; b. normal wear and tear; c. repairs by third parties, including the
buyer or ; d. parts procured by Atlas Copco from third parties, insofar as the third party has not
furnished any warranty to Atlas Copco.
8.7 For items located in Saudi Arabia and Kuwait , this warranty shall include the costs of materials and labor, insofar as the repairs are
made at Atlas Copco’s workshop. For items located outside Saudi Arabia and Kuwait, this warranty shall only include the costs of materials.
If the buyer or end user sends the items at its expense to one of Atlas Copco’s branches in Saudi Arabia and Kuwait, and the items are
sent and received consistent with Atlas Copco’s instructions, the warranty shall include the costs of both materials and labor.
8.8 If, when the items are repaired or placed, more than six months of the original warranty period have lapsed, the warranty period for
the replaced or repaired parts shall be extended, until six months after delivery of the replaced or
repaired parts.
8.9 Unless expressly stated in the agreement, warranties shall not be given for second-hand items.
8.10 If the buyer does not fulfil any obligation or obligations properly or on time, Atlas Copco shall not have any warranty obligation.

Article 9 Liability
9.1 Atlas Copco’s liability shall be limited to fulfilment of the warranty obligations described in Article 8 of these Terms and Conditions.
9.2 Except in the event of gross negligence on Atlas Copco’s part, and subject to the provisions in the previous sentence, any liability by
Atlas Copco regarding matters such as loss of profits, other indirect damage and damage resulting from liability vis-à-vis third parties,
shall be excluded. Atlas Copco shall therefore not be liable for: a. infringement of patents, licenses or other third-party rights resulting from
information furnished by or on behalf of the buyer; b. damage or loss, whatever the cause, of raw materials, semi-finished products, plates,
tools and other items provided by the buyer.
 Quote
Quote number: 4917417
Date: 25/02/2024
25/26

9.3 If, without being instructed to assemble items, Atlas Copco nevertheless provides help and assistance – of whatever nature – with
assembly, this shall occur at the buyer’s risk.
9.4 If and only if it is judicially established that, despite the provisions in paragraphs 1 and 2, Atlas Copco is liable for any damage, Atlas
Copco’s total liability shall be limited to compensating direct damage, up to at most
an amount equaling the price (exclusive of Turnover tax) stipulated for such performance And/or delivery.
If the agreement is primarily a continuing Performance agreement with a term exceeding One year, the amount shall be Set at the total of
the payments (exclusive of Turnover tax) stipulated for one year. The total compensation for direct damage, However, shall never exceed
one hundred thousand Saudi Riyal (SAR 100,000) per year. For purposes of this Article, “direct damage” shall solely mean: a. the
reasonable costs the buyer has incurred in order to have Atlas Copco’s performance conform to the agreement concluded;
b. reasonable costs incurred to ascertain the cause and scope of the damage, insofar as such Ascertainment relates to direct damage
within the meaning of this Article; c. reasonable costs incurred to avoid or limit
damage, insofar as the buyer demonstrates that these costs limited direct damage within the meaning of this Article.
9.5 Atlas Copco’s total liability for damage on account of death or physical injury or for material damage to goods shall not in any event
exceed the amount paid out under Atlas Copco’s insurance.
9.6 Atlas Copco shall not be liable at any time for indirect damage, including consequential damage, lost profits, lost savings, loss due to
business interruption or any other damage besides that referred to in Articles 9.4 and 9.5.
9.7 For any right to compensation to arise, the buyer must always report the damage in writing to Atlas Copco as soon as possible after
it arises.
9.8 A series of related events resulting in damage shall be considered a single event for purposes of application of this Article. 9.9 The
buyer must indemnify or compensate Atlas Copco with respect to any third-party claims for compensation of damage for which Atlas
Copco’s liability has been excluded in relation to the buyer under these Terms and Conditions.

Article 10 Force majeure

10.1 For purposes of Article 4, “force majeure” shall mean any failure to satisfy the agreement which cannot be attributed to Atlas Copco
or the buyer, because it is not due to the fault of Atlas Copco or the buyer, nor the responsibility of Atlas Copco or the buyer by virtue of
the law, legal act or generally accepted
practices.
10.2 In the event of a temporary situation of force majeure, including a situation in which a product ordered by the buyer is temporarily
undeliverable, Atlas Copco shall be entitled to extend the envisaged delivery period under Article 4 by the time during which the temporary
situation continues.
10.3 In the event of a permanent situation of force majeure, including a situation which is beyond Atlas Copco’s or the buyer’s control, or
which they cannot reasonably control, and which makes it impossible to deliver or furnish products or to perform work and/or services,
Atlas Copco or the buyer shall be entitled to terminate the agreement extra judicially. In a force majeure situation, the buyer may not claim
any compensation from Atlas Copco for the damage suffered by it.

Article 11 Confidentiality, intellectual property

11.1 All intellectual or industrial property rights and similar rights with regard to goods or products delivered and/or furnished by Atlas
Copco to the buyer or for work and/or services performed for the buyer shall be held
exclusively by Atlas Copco.
11.2 With respect to third parties, the buyer must maintain the confidentiality of all drawings, descriptions, specifications, designs,
constructions, diagrams, technical documents and other business information as
well as know-how in the broadest sense of the word from Atlas Copco of which it has been informed or become aware in any manner.
11.3 Unless expressly agreed otherwise in writing, no provision whatsoever in the agreement concluded with the buyer or agreements
between Atlas Copco and the buyer ensuing from this shall constitute a full or partial transfer to the buyer of the rights referred to in Article
11.1. The buyer recognizes these rights and shall refrain from any type of direct or indirect infringement of these rights, under pain of
forfeiture of a penalty, due and
payable in full, of SAR 25,000 for each breach or each week that the breach continues, without prejudice to Atlas Copco’s other rights in
this regard, including the right to fulfilment of obligations and/or full compensation.
11.4 If the buyer becomes aware that third parties are infringing the rights referred to in Article 11.1, the buyer must immediately inform
Atlas Copco of this in writing. Unless it receives written permission from Atlas Copco,
the buyer shall not in any manner whatsoever itself take legal or other action against such infringement. If Atlas Copco decides to take
legal or other action against infringing third parties, the buyer shall, at Atlas Copco’s
expense, fully cooperate as requested by Atlas Copco.

Article 12 Transfer of rights and obligations

Atlas Copco shall be entitled to transfer to one or more third parties the right to fulfil its obligations and/or to exercise its rights under this
agreement. Atlas Copco shall furnish written notice of any such transfer to the buyer.

Article 13 Non-performance, termination of agreement

13.1 Atlas Copco shall be entitled to terminate the agreement with the buyer with immediate effect for the future through written notice,
without any prior notice of default, or to cease further deliveries or performance of work and/or services, without being obliged to pay any
compensation, and without prejudice to its
other rights, if: a. despite a proper notice of default, the buyer breaches any obligation it has;
b. a temporary or permanent suspension of payments is granted to the buyer or it is put into liquidation or declared bankrupt, or the buyer
fi les a petition for application of the debt rescheduling scheme, or the buyer is placed under guardianship or administration; c. an
attachment is made against the buyer or its property regarding substantial debts, and this attachment is maintained for more than two
months; d. the buyer ceases or otherwise winds up its business operations in whole or in part, and/or fundamentally changes its business
activities or transfers these to a third party without Atlas Copco’s prior written permission.
13.2 All claims which Atlas Copco has against the buyer in these situations shall be immediately due and payable in full.
13.3 Atlas Copco shall never owe the buyer any compensation or payment on account of the aforementioned termination of the agreement,
without prejudice to Atlas Copco’s right to full compensation because of the
buyer’s breach of its obligations as referred to above and without prejudice to Atlas Copco’s other rights.

Article 14 Delay, cancellation

 Quote
Quote number: 4917417
Date: 25/02/2024
26/26

14.1 If and insofar as the buyer wishes to suspend taking possession of the item, the buyer shall owe Atlas Copco storage costs for the
entire delay period, without prejudice to the buyer’s obligation to pay the full purchase price to Atlas Copco in accordance with the
provisions in Article 6. The storage costs shall be invoiced to the buyer monthly.
14.2 If and insofar as the buyer wishes to cancel taking possession of the item, or at least an item included in the purchase agreement,
the buyer shall owe Atlas Copco compensation equaling the costs incurred by Atlas Copco up to the time of cancellation, such costs
amounting to at least 30% of the purchase price.
14.3 Cancellation must occur by means of a registered letter from the buyer to Atlas Copco’s address.

Article 15 Applicable law, disputes

15.1 Saudi law shall solely apply to the agreement and any later agreements.
15.2 Subject to the applicability of paragraph 3 of this Article, all disputes arising in connection with an agreement to which these Delivery
Terms and Conditions apply in whole or in part, or in connection with later agreements ensuing from such an agreement, shall be settled
exclusively by the competent court in Saudi Arabia unless Atlas Copco opts to apply to the court designated by law.
15.3 Insofar as the disputes described in the previous paragraph fall within the subject-matter jurisdiction of the Sub-District Court under
the rules of Saudi Arabia civil procedural law, then the District Court, Sub-District Section, may settle the dispute.

Trade Compliance Clause 2021

Any quotation is legally binding upon us only after you have received a written acceptance from us of any order from you based on that
quotation and we can at any point in time withdraw our quotation.By placing the order you certify that the order will not be used for any
purpose connected with chemical, biological or nuclear weapons, or missiles capable of delivering such weapons, nor any other purpose
prohibited by applicable law. Furthermore, you certify that you will comply with applicable local and international foreign trade and
customs requirements or any embargos or other sanctions.You will immediately notify us in writing of any breach of this statement.We
shall not be obligated to fulfill a binding order or agreement or any part thereof or related to it, nor liable for its non-fulfillment, if such
fulfillment is prevented by any impediments arising out of applicable local and/or international foreign trade and customs requirements or
any embargos or other sanctions. We shall have the right to terminate a binding order or agreement or any part thereof or related to it,
with immediate effect and without prior notice, if fulfillment is prevented by any impediments arising out of applicable local or international
foreign trade and customs requirements or any embargos or other sanctions. The customer shall indemnify us for any direct or indirect
damages arising in consequence of any breach of this statement.