Scribd
Upload
38 views1 page

FPM75 80-01-75000 en

Uploaded by

trahisofiane06
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

FPM75 80-01-75000 en

Uploaded by

trahisofiane06
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Material datasheet November 2019 Page 1 | 1

FPM 75 / 80-01-75000
75 ShA / bisphenolic crosslinked / black

! Fluorinated rubber
! Type A (approx. 66% fluorine)
! Standard material
! Specification for DVGW according to DIN EN 549
! Very good temperature resistance, high chemical resistance.
! Excellent resistance to ozone, ageing and weathering.

Property Value Unit DIN Standard


Hardness 75 ±5 Shore A DIN ISO 7619-1
Density 2,02 ±0,03 g/cm³ DIN EN ISO 1183-1
Elongation at break ≥ 125 % DIN 53504
Tensile strength ≥7 N/mm² DIN 53504
Compression set 150°C/24h 6,2 % DIN ISO 815
Compression set 175°C/168h max. 40 % DIN ISO 815
Rebound resilience 5 % DIN ISO 53512
Tear resistance 5,4 N/mm DIN ISO 34-1 A
Tear resistance 14,1 N/mm DIN ISO 34-1 B
min. operating temperature 0 °C
max. operating temperature +150 °C
Specification DVGW-DIN EN 549
Temperature class E1
Hardness range class H3

All above stated data result from random tests which were taken from the ongoing production. All data were established based on standard test-specimen according to ISO, DIN and ASTM
standards and can basically not be carried over to the construction element.

Our applied technical advice, either oral, written or through tests is given according to our best knowledge. However, this information is to be considered as non-obligatory instruction, also in
terms of any protective rights of a third party, and does not exempt you from testing our product in reference to its suitability for the intended process and purpose. Utilisation, application and
processing of the products occur entirely outside of our control and are therefore exclusively your responsibility. However, should a case of liability come into question, it will be limited to all
damages in the value of the product which we delivered and you used. By all means, we do warrant the impeccable quality of our products in accordance with our general sales and delivery
conditions.

Trygonal Group GmbH Neue Heimat 22 Phone: +49 (0) 70 46 / 96 10-0 [email protected]
  D-74343 Sachsenheim-Ochsenbach   Fax: +49 (0) 70 46 / 96 10-33 www.trygonal.com
 

You might also like