Scribd
Upload
28 views3 pages

Bondflex Elastomeric Waterproofing Paintmsds

Uploaded by

Jhoreen Fabito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views3 pages

Bondflex Elastomeric Waterproofing Paintmsds

Uploaded by

Jhoreen Fabito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Page 1 of 3

MATERIAL SAFETY DATA SHEET

Sealbond BONDFLEX
Elastomeric Waterproofing Paint

1. CHEMICAL PRODUCTS/ IDENTIFICATION OF SUBSTANCE

PRODUCT NAME: Bondflex Elastomeric Waterproofing Membrane


PRODUCT CODE: BONDFLEX EWB-148
PRODUCT TYPE: Waterbase Acrylic / Waterproofing Paint

2. COMPOSITION / INFORMATION ON INGREDIENTS

Chemical nature:
Approx. 100% aqueous dispersion of a polymer based on: N-butyl acrylate and styrene

3. POSSIBLE HAZARDS

Advice on critical hazards to man and the environment: none

4. FIRST AID MEASURES

General advice : Remove contaminated clothing


If inhaled : Keep patient calm, remove to fresh air, and summon medical help.
On skin contact : Wash affected eyes for at least 15 minutes under running water with eye
Lids held open, consult an eye specialist.
On ingestion : Immediately rinse mouth and then drink plenty of water, summon
Physician.

5. FIRE FIGHTING MEASURES

Suitable extinguisher media: Water spry, dry extinguisher media, foam, carbon dioxide (CO2)

6. ACCIDENTAL RELEASE MEASURES

After spillage / leakage / gas leakage:


Large spillage should be pumped into containers; soak up remainder with absorbent material.
(e.g Keiselgur). Small spillage can be swilled away with water. Waste water be disposed of
correctly.
Page 2 of 3

7. HANDLING AND STORAGE

Handling:
Advice on safe handling : No special measures necessary
Storage : Store protection against freezing

8. PHYSICAL AND CHEMICAL PROPERTIES

Form : semi-liquid
Color : white/gray/beige
Odour : faint aromatic
Change in physical state
Solidification temperature : 0°C (water)
Boiling point : 100°C (water)
Flash point : not applicable
Explosion limits : lower none
Upper none
IgnitionTemperature : not applicable
Vapour pressure : 20°C 23 mbar (water0
Density : 20°C approx. 1.04 g / cm3 DIN 53 217
Solubility in water : miscible
Ph value : @ g/l, 23°C – 7.0 – 8.0 DIN 53785
Viscosity : 23°C 700-1,500 mPa.s (100 s E-1) DIN 53 019
Volatile Organic Content : 69.7g/L

9. EMPLOYEE PROTECTION

Advise to use protective gloves & respiratory equipment

10. STABILITY AND REACTIVITY

Thermal decomposition:
No decomposition if used correctly:

Hazardous reactions:
No decomposition if used correctly.

10. TOXICOLOGICAL INFORMATION

In our experience and according to information available to us the product is not harmful to
health provided it is correctly handled and processed according to the given recommendations.

12. ECOLOGICAL INFORMATION

Elimination information
The product can de virtually eliminated from water by abiotic processes e.g adsorption onto
activated sludge.
Do not discharge product into natural waters pretreatment (biological treatment plant).
Page 3 of 3
Behavior and environmental fate.

Inhibition of degradation activity in activated sludge is not to be anticipated during correct


introduction of low concentrations.
Ecotoxic effects
No data available
Further ecological information
Local effluent treatment regulations should be complied with.

13. DISPOSAL CONSIDERATIONS

Must be disposed of by special means, e.g suitable incineration, in accordance with local
regulations.

14. TRANSPORT INFORMATION

Not classified as hazardous under transport regulations.

15. REGULATORY INFORMATION

Labeling according to EEC Directives.


Not subject to labeling in accordance with EEC Directives.
Handle in accordance with good industrial hygiene and safety practice.
National legislation / regulations
According to data available to us product is not hazardous under the relevant German Legislation
(gefahrstoffverordnung).

16. OTHER INFORMATION

The information contained herein is based on the present state of our knowledge and does not
therefore guarantee certain properties. Recipients of our product must take responsibility for
observing existing laws and regulations.

You might also like