Scribd
Upload
10 views

HiPath SIP Configuration Example For Asterisk

Uploaded by

hosseinzade.iti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

HiPath SIP Configuration Example For Asterisk

Uploaded by

hosseinzade.iti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

I trying to connect HiPath 3800 / HG1500 and Asterisk but no luck for now.

Does anybody
have some experience and procedure how to do it? My software version on Siemens
HG1500 is V8 and I use AsteriskNOW GUI 1.7.1 - 64bit.

OK nice to hear. I am familiar with Siemens PBX . Regarding I don’t know which part is the
appropriate part of sip.conf I can give you all . It doesn’t mater because I have this PBX in
laboratoy and data is not confidentional.
I rename the file in .txt.

[quote];!
;! Automatically generated configuration file
;! Filename: sip.conf (/etc/asterisk/sip.conf)
;! Generator: Manager
;! Creation Date: Wed Dec 1 10:35:32 2010
;!
;
; SIP Configuration example for Asterisk
;
; SIP dial strings
;-----------------------------------------------------------

;[grandstream1]
;type=friend
;context=from-sip ; Where to start in the dialplan when this phone calls
;callerid=John Doe <1234> ; Full caller ID, to override the phones config
; on incoming calls to Asterisk
;host=192.168.0.23 ; we have a static but private IP address
; No registration allowed
;nat=no ; there is not NAT between phone and Asterisk
;directmedia=yes ; allow RTP voice traffic to bypass Asterisk
;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone
;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time
; from the phone to asterisk (deprecated)
; 1 for the explicit peer, 1 for the explicit user,
; remember that a friend equals 1 peer and 1 user in
; memory
; There is no combined call counter for a “friend”
; so there’s currently no way in sip.conf to limit
; to one inbound or outbound call per phone. Use
; the group counters in the dial plan for that.
;
;mailbox=1234@default ; mailbox 1234 in voicemail context “default”
;disallow=all ; need to disallow=all before we can use allow=
;allow=ulaw ; Note: In user sections the order of codecs
; listed with allow= does NOT matter!
;allow=alaw
;allow=g723.1 ; Asterisk only supports g723.1 pass-thru!
;allow=g729 ; Pass-thru only unless g729 license obtained
;callingpres=allowed_passed_screen ; Set caller ID presentation
; See README.callingpres for more information

;[xlite1]
; Turn off silence suppression in X-Lite (“Transmit Silence”=YES)!
; Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed
;type=friend
;regexten=1234 ; When they register, create extension 1234
;callerid=“Jane Smith” <5678>
;host=dynamic ; This device needs to register
;nat=yes ; X-Lite is behind a NAT router
;directmedia=no ; Typically set to NO if behind NAT
;disallow=all
;allow=gsm ; GSM consumes far less bandwidth than ulaw
;allow=ulaw
;allow=alaw
;mailbox=1234@default,1233@default ; Subscribe to status of multiple mailboxes
;registertrying=yes ; Send a 100 Trying when the device registers.

;[snom]
;type=friend ; Friends place calls and receive calls
;context=from-sip ; Context for incoming calls from this user
;secret=blah
;subscribecontext=localextensions ; Only allow SUBSCRIBE for local extensions
;language=de ; Use German prompts for this user
;host=dynamic ; This peer register with us
;dtmfmode=inband ; Choices are inband, rfc2833, or info
;defaultip=192.168.0.59 ; IP used until peer registers
;mailbox=1234@context,2345 ; Mailbox(-es) for message waiting indicator
;subscribemwi=yes ; Only send notifications if this phone
; subscribes for mailbox notification
;vmexten=voicemail ; dialplan extension to reach mailbox
; sets the Message-Account in the MWI notify message
; defaults to global vmexten which defaults to “asterisk”
;disallow=all
;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw!

;[polycom]
;type=friend ; Friends place calls and receive calls
;context=from-sip ; Context for incoming calls from this user
;secret=blahpoly
;host=dynamic ; This peer register with us
;dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
;defaultuser=polly ; Username to use in INVITE until peer registers
;defaultip=192.168.40.123
; Normally you do NOT need to set this parameter
;disallow=all
;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw!
;progressinband=no ; Polycom phones don’t work properly with “never”

;[pingtel]
;type=friend
;secret=blah
;host=dynamic
;insecure=port ; Allow matching of peer by IP address without
; matching port number
;insecure=invite ; Do not require authentication of incoming INVITEs
;insecure=port,invite ; (both)
;qualify=1000 ; Consider it down if it’s 1 second to reply
; Helps with NAT session
; qualify=yes uses default value
;qualifyfreq=60 ; Qualification: How often to check for the
; host to be up in seconds
; Set to low value if you use low timeout for
; NAT of UDP sessions
;
; Call group and Pickup group should be in the range from 0 to 63
;
;callgroup=1,3-4 ; We are in caller groups 1,3,4
;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5
;defaultip=192.168.0.60 ; IP address to use if peer has not registered
;deny=0.0.0.0/0.0.0.0 ; ACL: Control access to this account based on IP address
;permit=192.168.0.60/255.255.255.0
;permit=192.168.0.60/24 ; we can also use CIDR notation for subnet masks

;[cisco1]
;type=friend
;secret=blah
;qualify=200 ; Qualify peer is no more than 200ms away
;nat=yes ; This phone may be natted
; Send SIP and RTP to the IP address that packet is
; received from instead of trusting SIP headers
;host=dynamic ; This device registers with us
;directmedia=no ; Asterisk by default tries to redirect the
; RTP media stream (audio) to go directly from
; the caller to the callee. Some devices do not
; support this (especially if one of them is
; behind a NAT).
;defaultip=192.168.0.4 ; IP address to use until registration
;defaultuser=goran ; Username to use when calling this device before registration
; Normally you do NOT need to set this parameter
;setvar=CUSTID=5678 ; Channel variable to be set for all calls from or to this device
;setvar=ATTENDED_TRANSFER_COMPLETE_SOUND=beep ; This channel variable will
; cause the given audio file to
; be played upon completion of
; an attended transfer.

;[pre14-asterisk]
;type=friend
;secret=digium
;host=dynamic
;rfc2833compensate=yes ; Compensate for pre-1.4 DTMF transmission from another
Asterisk machine.
; You must have this turned on or DTMF reception will work improperly.
;t38pt_usertpsource=yes ; Use the source IP address of RTP as the destination IP address
for UDPTL packets
; if the nat option is enabled. If a single RTP packet is received Asterisk will know the
; external IP address of the remote device. If port forwarding is done at the client side
; then UDPTL will flow to the remote device.
[/quote]

You might also like