C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No.

18
Item Rate BoQ
Validate Print Help

Tender Inviting Authority: Commander Works Engineers, Station Road, Visakhapatnam – 530 004

Name of the Work: REPAIRS TO NON STRUCTURAL MEMBERS, SUNKEN FLOORS INCLUDING INTERNAL AND EXTERNAL PAINTING TO CERTAIN BUILDINGS AT INS
SATAVAHANA AND INS VIRBAHU UNDER GE [NB], VISAKHAPATNAM.

Contract No: C. A. No. CWE / VIZ / of 2023 – 2024

Bidde
r
Name
:

PRICE SCHEDULE
[This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable
to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only]
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
1 Demolition of Plain Cement Concrete in ground floors and Pavings not exceeding 15cm thick 30.00 Cubic 0.00 #VALUE!
[below or above ground level] and removing rubbish to a distance exceeding 1.5 KM but not Metre
exceeding 5 KM complete all as specified and as directed.

2 Demolition of Plain Cement Concrete of any description and in any position not 360.00 Cubic 0.00 #VALUE!
otherwise specifically provided for and removing rubbish to a distance exceeding 1.50 Metre
KM but not exceeding 5.00 KM complete all as specified and as directed.

3 Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate 2.00 Cubic 0.00 #VALUE!
demolition] of any description and in any position not otherwise specifically provided Metre
for and removing rubbish to a distance not exceeding 1.50 KM complete all as
specified and as directed.

4 Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches 5.00 Cubic 0.00 #VALUE!
pillars etc and removing rubbishto a distance exceeding 1.50 KM but not exceeding Metre
5.00 KM complete all as specified and as directed.

5 M & L for cutting holes into or through brick walls built in cement mortar and walls of 460.00 Per cm 0.00 #VALUE!
cement concrete and making good in Cement Mortar 1:3 or Cement Concrete 1:2:4, depth
Type B-1 as required for superficial area over 400 Sq.cm bot not exceeding 0.1 Sqm
complete all as specified and as directed.
6 M & L for cutting holes into or through stone walls built in cement mortar and walls of 190.00 Per cm 0.00 #VALUE!
cement concrete and making good in Cement Mortar 1:3 or Cement Concrete 1:2:4, depth
Type B-1 as required for superficial area over 400 Sq.cm bot not exceeding 0.1 Sqm
complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 19
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
7 M & L for cutting holes into or through cement concrete slabs, Chajjas, etc. including 95.00 Per cm 0.00 #VALUE!
cutting through reinforcement for superficial area not exceeding 100 Sq.cm complete depth
all as specified and as directed.
8 M & L for cutting holes into or through cement concrete slabs, Chajjas, etc. reinforced 50.00 Per cm 0.00 #VALUE!
or otherwise for superficial area exceeding 250 Sq.cm and not exceeding 500 Sq.cm depth
complete all as specified and as directed.

9 M & L for cutting holes into or through cement concrete slabs, Chajjas, etc. reinforced 300.00 Per cm 0.00 #VALUE!
or otherwise for superficial area exceeding 500 Sq.cm and not exceeding 0.1 Sqm depth
complete all as specified and as directed.

10 Cutting chases in stone/ concre block walls, pinning in, making good to facings where 400.00 Running 0.00 #VALUE!
required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, Metre
sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or
concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
complete all as specified and as directed.

11 Taking down Chowkats or frame with shutters [without taking off shutter from the 60.00 Each 0.00 #VALUE!
frame] not exceeding 1.5 Sq.m each complete all as specified and as directed.

12 Taking down Chowkats or frame with shutters [without taking off shutter from the 30.00 Each 0.00 #VALUE!
frame] exceeding 1.5 Sq.m and not exceeding 4 Sq.m each complete all as specified
and as directed.
13 Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar 2300.00 Square 0.00 #VALUE!
bedding [but not backing] and removing serviceable tiles to the stores and removing Metre
rubbish / debris to a distance exceeding 1.5 KM but not exceeding 5.0 KM complete all
as specified and as directed.
14 Demolition of Stone Slab laid, bedded and pointed in Cement Mortar of thickness not 210.00 Square 0.00 #VALUE!
exceeding 25 mm and removing serviceable tiles to the stores and removing rubbis / Metre
debris to a distance exceeding 1.5 KM but not exceeding 5.0 KM complete all as
specified and as directed.
15 Taking down Cement Plaster of any description on brick or stone walls or concrete 1300.00 Square 0.00 #VALUE!
surfaces etc including raking out joints, hacking for key scrubbing down with water Metre
etc and removing rubbish to a distance not exceeding 1.50 KM complete all as
specified and as directed.

16 Taking down or up steel tubing and connections for 15 mm bore of pipe complete all 400.00 Running 0.00 #VALUE!
as specified and as directed. Metre

17 Taking down or up steel tubing and connections for 20 mm bore of pipe complete all 300.00 Running 0.00 #VALUE!
as specified and as directed. Metre
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 20
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
18 Taking down or up steel tubing and connections for 25 or 32 mm bore of pipe 450.00 Running 0.00 #VALUE!
complete all as specified and as directed. Metre

19 Taking down or up steel tubing and connections for 40 or 50 mm bore of pipe 200.00 Running 0.00 #VALUE!
complete all as specified and as directed. Metre

20 Taking down CI pipes/ PVC SWR of 150/160mm bore of any pattern, including all 120.00 Running 0.00 #VALUE!
fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the Metre
centre line over fittings and accessories) all as specified and as directed .

21 Taking down CI pipes/ PVC SWR of 100/110mm bore of any pattern, including all 560.00 Running 0.00 #VALUE!
fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the Metre
centre line over fittings and accessories) all as specified and as directed .

22 Taking down CI pipes/ PVC SWR of 75/80mm bore of any pattern, including all fittings, 590.00 Running 0.00 #VALUE!
heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre Metre
line over fittings and accessories) all as specified and as directed .

23 M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m 5.00 Cubic 0.00 #VALUE!
mean radius built in Cement Mortar 1:6 complete all as specified and as directed. Metre

24 M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on 50.00 Square 0.00 #VALUE!
plan to any radius built in Cement Mortar 1:4 including 2 Nos of 6mm dia bars at Metre
every fourth course of brick work complete all as specified and as directed.

25 S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, 1.20 Cubic 0.00 #VALUE!
framed, rebated on the solid, rounded or chamfered, put together with glue, pinned Metre
at joints complete all as specified and directed.

26 S & F Factory made, 40mm thick, Second Class Hard Wood, Plain framed, Panelled 60.00 Square 0.00 #VALUE!
Shutter [Two Panel] with Lock Rail and Panel of 9 mm BWP Commercial Ply or 12 mm Metre
Veneered Particle Board with Commercial Veneering on both faces, the size of Rail
and Stile as per IS – 1003 [Part – I], Kiln Seasoned and Chemically Pressure treated
and fitted to Chowkats complete all as specified and as directed.

27 S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton 60.00 Square 0.00 #VALUE!
Shutters, open rebated and prepared to receive glass, gauze, etc., without sash bars, Metre
edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for
securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section
8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 21
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
28 S & F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed 350.00 Running 0.00 #VALUE!
PVC sheet reinforced with MS square tube fixed in opening including edges painted to Metre
match with printed sheet complete all as specified and as directed.

29 S & F Factory Made Solid PVC Moulded Door Shutter, with Particle Board Core, 28 to 96.00 Square 0.00 #VALUE!
30mm thick [Stiles], with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Metre
Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing
in frame at site as per specification & drawing shown on Serial Page No. 161 of MES
Schedule Part - II complete all as specified and as directed.

30 S & F 125 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished 90.00 Each 0.00 #VALUE!
including fixtures complete all as specified and as directed.

31 S & F 100 mm size, Butt hinges, Extruded Aluminium alloy with galvanised mild steel 180.00 Each 0.00 #VALUE!
hinge pin, anodised, Type C-21, including fixtures complete all as specified and as
directed.
32 S & F 375 mm size mild steel ordinary rat tail rod pattern springs including roller and 30.00 Each 0.00 #VALUE!
roller plate complete all as specified and as directed.

33 S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm 180.00 Each 0.00 #VALUE!
long complete all as specified and as directed.

34 S & F Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section 120.00 Each 0.00 #VALUE!
complete all as specified and as directed.

35 S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of 120.00 Each 0.00 #VALUE!
size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and
sliding bolts of extruded sections or cast aluminium alloy complete all as specified
and as directed.
36 S & F in repairs Stainless Steel Double Coat Hook, Fancy type complete all as 30.00 Each 0.00 #VALUE!
specified and as directed.
Make: Jaquar Catalogue No. AKP-35761P or its equivalent in Kohler / Cera /
Parryware / Prayag/ Grohe
37 S & F Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm 40.00 Square 0.00 #VALUE!
and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples Metre
with new wooden beading including necessary painting to beading to match with
existing surfaces complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 22
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
38 M & L for applying Chemical Injection Treatment in the form of Pressure Grouting by 900.00 Square 0.00 #VALUE!
drilling 20 mm dia holes, 60 mm deep @ 100 cm grid at bottom floor and all the Metre
internal wall surfaces of the sunken slabs of toilet by injecting Cement Slurry mixed
with Grout Admixture [CONBEXTRA EP 10" of M/s. Fosroc Chemicals India [P] Ltd. or
its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals
Pvt. Ltd. or M/s Batik India Pvt. Ltd.] at 225 Grams for 50 KG of cement and applying a
coat of Brush Bond RFX of M/s. Fosroc Chemicals or equivalent approved water
proofing coating as per manufacturer's instructions complete all as required and as
directed at site.
39 M & L for Cleaning the existing exposed reinforcement of slab, beam, column, footing 5.00 Square 0.00 #VALUE!
etc. and any other RCC structural member by emery paper, providing two coats of Metre
Single Component Rust Remover i.e. Sika Rustoff 100 of M/s. Sika India Pvt. Ltd. or
equivalent approved bonding agent in M/s. Fosroc Chemicals or M/s. STP Ltd. or M/s.
Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's
instructions] complete all as specified and as directed.

40 M & L for cleaning the existing exposed concrete surfaces and applying Solvent free 400.00 Square 0.00 #VALUE!
two component Bonding Agent i.e. Sikadur-32 LP of M/s. Sika India Pvt. Ltd. or Metre
equivalent approved bonding agent in M/s. Fosroc Chemicals or M/s. STP Ltd. or M/s.
Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's
instructions to create structural bonding between old concrete surface and new
concrete complete all as specified and as directed.

41 M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, 350.00 Square 0.00 #VALUE!
Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any Metre
thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of
Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s.
Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik
India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting
averaging 25mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar
1:3 with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP
Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight
of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias &
Chajjas etc., finishing surface rough conforming to proper geometrics including
providing double scaffolding and safety measures as required and removal of the
same on completion and disposal and depositing the demolished material to a
distance exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as
directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 23
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
42 M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, 300.00 Square 0.00 #VALUE!
Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any Metre
thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of
Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s.
Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik
India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting
averaging 30mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar
1:3 with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP
Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight
of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias &
Chajjas etc., finishing surface rough conforming to proper geometrics including
providing double scaffolding and safety measures as required and removal of the
same on completion and disposal and depositing the demolished material to a
distance exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as
directed.

43 M & L for application of high build polymer modified cement mortar, 1:2½ mixed with 400.00 Square 0.00 #VALUE!
3 Litres of Nitobond SBR of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in Metre
M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or or M/s. Choksey Chemicals Pvt. Ltd. or M/s
BOSTIk India Pvt. Ltd. per bag of cement in ceiling surfaces in two layers to form 10 to
20 mm thick even surface over a coat of bonding agent by mixing Nitobond SBR of
M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or
M/s. STP Ltd. or or M/s. Choksey Chemicals Pvt. Ltd. or M/s BOSTIk India Pvt. Ltd. @ 1
Litre + 1 Litre water + 3 KG cement complete all as per manufacturer's instructions.

44 M & L for Non-Shrink, Cementitious Micro Concrete using Rendroc RG' manufactured 4.00 Cubic 0.00 #VALUE!
by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or Metre
M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.
modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in
the ratio as per manufacturer's instructions, laid in average thickness of 80 to 100mm
in columns, beams and similar structural members including use and waste of water
tight formwork to facilitate pouring of micro concrete complete all as per
manufacturer's instructions including providing double scaffolding and safety
measures as required and as specified. [Note: Measurement shall be considered for
circumference at centerline of core thickness]
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 24
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
45 M & L for providing additional reinforcement using High Strength Corrosion Resistant 100.00 Kilogra 0.00 #VALUE!
Deformed Bars of Grade Fe–500D by checking the diameter of the existing bars, m
cutting the necessary main reinforcement to the required length with proper
development length, tying and binding with 16 SWG black soft annealed binding
wire / welding where required / lapping / anchoring with the existing shear connectors
/ reinforcement so that the additional reinforcement acts monolithically with the
existing reinforcement and core concrete complete all as specified and as directed.
Note: The shear reinforcement shall also be provided as specified here-in-above in the
form of 2 "U" shaped bars if existing shear reinforcement is found deteriorated /
diameter of the bars is reduced to form a rigid cage and placing with proper cover
block, supports, chairs, spacers etc. Diameter of the new bar shall be equal to the
existing bars. Additional reinforcement shall be provided only in case the diameter of
the existing bars is found less than 25% of the original diameter.

46 M & L for Powder coated aluminium sections of approved colour for doors, Windows, 135.00 Kilogra 0.00 #VALUE!
Ventilators, Partitions, with frames and shutters fully or partly glazed, sliding / m
openable, with extruded aluminium sections not less than 1.5mm thick and powder
coating not less than 60 micron thick including necessary jointing cleats, rubber
beading, neoprene packing, aluminium snap beading, screws, powder coated
aluminium fittings such as handles, aluminium butt hinges , aluminium tower bolts,
stainless steel friction hinges, locking arrangements etc. including taking down
existing unserviceable aluminium joineries complete all as specified and as directed.
Notes:
[a] The size of aluminium extruded sections shall conform to Designation 63400 all
shall be as specified in relevant IS code and as specified in MES Schedule Part - I.
[b] Panel inserts such as Glass / Particle board / Gauze and grill shall be measured and
paid separately at supply only rates.
[c] Weight of aluminium sections shall only be accounted for payment purpose.
Weight of aluminium Handles, Butt Hinges & Tower Bolts shall not be accounted for
payment purpose.
[d] The unit rate quoted shall be deemed to include for cost of jointing cleats, glazing
clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws,
anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower
bolts, stainless steel friction hinges,Peg stays, locking arrangements etc., and fixing
only of panel inserts of glass / particle board / gauge etc and grills.

47 Supply only 8mm thick Heat Absorbing Glass in squares exceeding 0.5 Sq.m in each 20.00 Square 0.00 #VALUE!
pane complete all as specified and as directed. Metre
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 25
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
48 Supply only Stainless steel wire cloth / mesh with average aperture not exceeding 10.00 Square 0.00 #VALUE!
1.40 mm and dia of wire 0.36 mm complete all as specified and as directed. Metre

49 Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 50.00 Kilogra 0.00 #VALUE!
(7mmx4.2mm), including Powder Coated Aluminium Channel of size 10 X 10 X 1.5mm m
complete all as specified and as directed.

50 S & F plain Aluminium Sheet Alloy 31000 H4 in Ridges, Hips, Valley Gutter, drip and 5.00 Square 0.00 #VALUE!
straight flashing of 0.71 mm thick complete all as specified and as directed. Metre

51 M&L for Providing light weight AAC block bats concrete 1:3:6 mix (1 part of cement : 3 225.00 Cubic 0.00 #VALUE!
parts of coarse sand : 6 parts of AAC block bats of size 40-60 mm) mixed with Metre
approved water proofing compound as per manufacturer's instructions, as in filling in
sunken floors, well rammed and compacted as required complete all as specified and
as directed.
Notes:-
[a] The AAC block bats shall conform to relevant IS and all necessary tests shall be
carried before incorporating the same in the work.
[b] Care shall be taken prior to filling, that all pipes passing through sunken portion
are pressure tested by maintaining pressure for 24 hours and junctions of pipes
passing through walls, slabs are well grouted and sealed. Necessary testing shall be
carried out by ponding water for required depth and maintaining continuously
B141for 72 hours and any leakage found shall be immediately rectified without any
extra cost.
[c] Rate quoted by the contractor shall be deemed to include for the cost of working
at all levels, leads and heights.
[d] Water proofing compound shall be measured and paid separately at supply only
rate under relevant item of this BoQ.

52 M & L for 25 mm average thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate 500.00 Square 0.00 #VALUE!
as in as in levelling couse, Sub base for flooring etc. including finishing the top Metre
surface even and fair complete all as specified and as directed.

53 M & L for 40 mm average thick PCC 1:2:4, Type B-1, using 20mm graded aggregate as 900.00 Square 0.00 #VALUE!
in as in levelling couse, Sub base for flooring etc. including mixing water proofing Metre
compound as per manufacturers instructions and finishing the top surface even
complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 26
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
54 M & L for 75mm thick PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth 30.00 Square 0.00 #VALUE!
protection etc surface finished even and smooth with out using extra cement and Metre
providing 12mm thick joints for full depth of PCC at every 3.00 m and every change of
direction duly filled with mastic filling comprising of 01 Part of heated bitumen blown
grade of any penetration and 3 parts of sand [all by weight] complete all as specified
and as directed.

55 M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size 900.00 Square 0.00 #VALUE!
exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Metre
Rectangular] as in Floors, skirtings, etc, set and jointed in neat cement slurry and
pointed flush using polymer based cementitious tiling joint filler to match the shade
of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement
Mortar 1:4 complete all as specified and as directed.
Note: The colour / shade / design of tiles shall be as approved by GE.

56 M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size 500.00 Square 0.00 #VALUE!
exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Metre
Rectangular] as in Floors, skirtings, etc, set and jointed in neat cement slurry and
pointed flush using polymer based cementitious tiling joint filler to match the shade
of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement
Mortar 1:4 complete all as specified and as directed.
Note: The colour / shade / design of tiles shall be as approved by GE.

57 M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium 900.00 Square 0.00 #VALUE!
Quality, of size 350 mm x 250 mm or 450 mm x 350 mm, 7 to 8 mm thick as in Vertical Metre
Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed
flush using polymer based cementitious tiling joint filler to match the shade of the tile
over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and
as directed.
Note: The colour / shade / design of tiles shall be as approved by GE.

58 M & L for machine cut Kota stone slab flooring using 20 to 25mm thick slabs, laid and 100.00 Square 0.00 #VALUE!
jointed with grey cement slurry mixed with a admixture of pigment to match shade of Metre
slab including rubbing and polishing to smooth mirror finish all to required sizes, the
size and design / pattern of slabs shall be as directed, including diagonals, inlays,
borders, margins in two or more shades of slabs including screed bed or bedding layer
of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 27
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
59 M & L for machine cut Kota stone slab as in riser of steps, skirting, dado etc. using 20 80.00 Square 0.00 #VALUE!
to 25mm thick slabs laid and jointed with grey cement slurry mixed with a admixture Metre
of pigment to match shade of slab including rubbing and polishing to smooth mirror
finish all to required sizes, the size and design / pattern of slabs shall be as directed,
including borders, margins in two or more shades of slabs over backing coat of 10mm
thick in cement mortar 1:3 complete all as specified and as directed.

60 M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red/ Ruby Red/ 40.00 Square 0.00 #VALUE!
Z Black/ Pearl Black as in Skirting, Dado, Risers of Steps, Jambs, Pillars, Partitions, Metre
Wall Lining [Veneering to Wall] etc. with machine cut edges, Table rubbed and
prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be
of design / pattern as directed, including diagonals, inlays, borders, margins in two or
more colours / shades, designs / patterns of stone slabs, set and bedded with grey
cement [slurry] and jointed and pointed flush using polymer based cementitious
tiling joint filler to match the shade of the Granite Slabs over backing coat of 10mm
thick in Cement Mortar 1:3 complete all as specified and as directed.
Note: Single stone slab shall be used for entire height of Skirting / Dado / Risers and
joints shall match with the flooring.

61 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and 120.00 Running 0.00 #VALUE!
other similar situations all as specified and as directed. Metre

62 M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface 400.00 Square 0.00 #VALUE!
of ceiling surfaces finished even and smooth without using extra cement complete all Metre
as specified and as directed.

63 M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, 500.00 Square 0.00 #VALUE!
surfaces finished even and smooth without using extra cement complete all as Metre
specified and as directed.
64 M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, 400.00 Square 0.00 #VALUE!
including mixing water proofing compound as per manufacturers instructions and Metre
finishing the top surface even and smooth without using extra cement complete all as
specified and as directed.
Note: Water proofing compound will be measured and paid separately.

65 M & L for rendering on concrete surfaces, 10 mm thick in Cement Mortar 1:3 including 1000.00 Square 0.00 #VALUE!
mixing water proofing compound as per manufacturers instructions and finishing the Metre
top surface even and smooth without using extra cement complete all as specified
and as directed.
Note: Water proofing compound will be measured and paid separately.

66 Supply only integral water proofing compound [ISI marked] of approved make. 110.00 Kilogra 0.00 #VALUE!
m
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 28
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
67 M & L for preparing newly plastered ceiling surfaces and applying three coats of white 400.00 Square 0.00 #VALUE!
washing complete all as specified and as directed. Metre

68 M & L for two coats of white wash on old decorated surfaces of ceilings etc including 2500.00 Square 0.00 #VALUE!
necessary preparation by brooming down or steel wire brushing complete all as Metre
specified and as directed.
69 M & L for preparing newly plastered Wall surfaces by using vaccume based sanding 500.00 Square 0.00 #VALUE!
machine and applying two coats of Acrylic washable Distemper by using auto Metre
roller/airless sprayer, over a coat of alkali resistant primer over two or more coats of
Cement based Wall Care Putty on walls by using multipurpose mixture for proper
mixing of putty and putty sprayer for application of putty including rubbing with sand
paper to obtain a smooth surface complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work
through the Authorised Applicator of the manufacturer only. The lowest bidder shall
submit MoU from manufacturer to provide technical support and trained persons for
carrying out Distempering & allied works through their authorised applicators before
commencement of the work to GE for approval.

70 M & L for one coat of Acrylic Washable Distemper by using auto roller/airless sprayer 8500.00 Square 0.00 #VALUE!
on old decorated wall surfaces including necessary preparation of surfaces by Metre
washing, rubbing down and stopping all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work
through the Authorised Applicator of the manufacturer only. The lowest bidder shall
submit MoU from manufacturer to provide technical support and trained persons for
carrying out Distempering & allied works through their authorised applicators before
commencement of the work to GE for approval.

71 M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using 400.00 Square 0.00 #VALUE!
auto roller/ airless sprayer over a Coat of Exterior Primer of same manufacturer as Metre
that of paint on newly plastered walls/ ceiling, pillasters, bands, borders, soffits of
chajjas and projections including necessary preparation of surfaces by using vaccume
based sanding machine complete all as specified and as directed.
Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under
subject work through the Authorised Applicator of the manufacturer only. The lowest
bidder shall submit MoU from manufacturer to provide technical support and trained
persons for carrying out Weather Proof Exterior Emulsion Painting through their
authorised applicators before commencement of the work to GE for approval.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 29
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
72 M & L for One coat of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using 6500.00 Square 0.00 #VALUE!
auto roller/ airless sprayer on old painted surfaces of Walls, pillasters, bands, Metre
borders, soffits of chajjas and projections etc including necessary preparation of
surfaces by using vaccume based sanding machine, washing, rubbing down and
stopping complete all as specified and as directed.
Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under
subject work through the Authorised Applicator of the manufacturer only. The lowest
bidder shall submit MoU from manufacturer to provide technical support and trained
persons for carrying out Weather Proof Exterior Emulsion Painting through their
authorised applicators before commencement of the work to GE for approval.

73 M & L for two coats of synthetic enamel paint over one coat of pink primer to newly 240.00 Square 0.00 #VALUE!
untreated wooden surfaces over 10cm width or girth including preparation of surfaces Metre
complete all as specified and as directed.

74 M & L for one coat of synthetic enamel paint on old painted wooden surfaces of any 100.00 Square 0.00 #VALUE!
description not other wise described over 10 cm width or girth incuding necessary Metre
preparation of surfaces complete all as specified and directed.

75 M & L for one coat of synthetic enamel paint on old painted steel surfaces of any 50.00 Square 0.00 #VALUE!
description not other wise described over 10 cm width or girth incuding necessary Metre
preparation of surfaces complete all as specified and directed.

76 M & L for one coat of synthetic enamel paint on old painted steel surfaces of any 50.00 10 0.00 #VALUE!
description not other wise described not exceeding 10 cm width or girth incuding Running
necessary preparation of surfaces complete all as specified and directed. Metre

77 M & L for French polishing one or more coats on old polished wooden surfaces of any 20.00 Square 0.00 #VALUE!
description over a coat of wood filler, over 10cm width or girth including necessary Metre
cleaning and preparing the surfaces complete all as specified and as directed.

78 S & F Rotational Moulded Polyethelene [HDPE] Water Tanks, Triple Layered, ISI 8.00 Each 0.00 #VALUE!
Marked, Cylindrical & Vertical Type 2000 Litres Capacity hoisted and fixed in position
including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow
and washout pipes complete including taking down old tanks and removing to store
complete all as specified and as directed.

79 S & F Rotational Moulded Polyethelene [HDPE] Water Tanks, Triple Layered, ISI 8.00 Each 0.00 #VALUE!
Marked, Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position
including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow
and washout pipes complete including taking down old tanks and removing to store
complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 30
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
80 S & F in repair Ball Valves, 40 mm Bore, high pressure of PTMT with epoxy coated 16.00 Each 0.00 #VALUE!
Aluminium rod & high-density plastic ball screwed for iron pipe etc complete all as
specified and as directed.
81 S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 25.00 Each 0.00 #VALUE!
MPa, 20 mm bore with iron wheel head, screwed both ends for iron pipe/ fixed to
CPVC pipes, conforming to IS, ISI Marked complete all specified and as directed.

82 S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 25.00 Each 0.00 #VALUE!
MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe/ fixed to
CPVC pipes, conforming to IS, ISI Marked complete all specified and as directed.

83 S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 10.00 Each 0.00 #VALUE!
MPa, 50 mm bore with iron wheel head, screwed both ends for iron pipe/ fixed to
CPVC pipes, conforming to IS, ISI Marked complete all specified and as directed.

84 S & F 16 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as 400.00 Running 0.00 #VALUE!
bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., Metre
concealed in walls/ ceiling including testing complete all as specified and as directed.

85 S & F 20 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as 300.00 Running 0.00 #VALUE!
bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., Metre
concealed in walls/ ceiling including testing complete all as specified and as directed.

86 S & F 25 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as 200.00 Running 0.00 #VALUE!
bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., Metre
concealed in walls/ ceiling including testing complete all as specified and as directed.

87 S & F 32 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as 250.00 Running 0.00 #VALUE!
bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., Metre
concealed in walls/ ceiling including testing complete all as specified and as directed.

88 S & F 40 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as 100.00 Running 0.00 #VALUE!
bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., Metre
concealed in walls/ ceiling including testing complete all as specified and as directed.

89 S & F 50 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as 100.00 Running 0.00 #VALUE!
bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., Metre
concealed in walls/ ceiling including testing complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 31
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
90 S & F 40 mm bore UPVC Pipes of pressure rating 10 Kgf/Cm², any type including all 40.00 Running 0.00 #VALUE!
fittings such as bends, reducers, etc., fixed to walls or laind in floors complete all as Metre
specified and as directed.

91 S & F in repairs Bib Taps, 15 mm dia, Brass Chromium Plated, Long Body, Fancy Type 200.00 Each 0.00 #VALUE!
with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all
as specified and as directed.
92 S & F in repairs Health Faucet, ABS body, including 1.00 m long flexible tube, ABS wall 60.00 Each 0.00 #VALUE!
hook, non return valve complete all as specified and as directed.
Make: Cat No. ALD -577 of JAQUAR or its equivalent model in Kohler / Cera /
Parryware/ Prayag/ Grohe

93 S & F in repairs Two way Bib Cock, cast copper alloy, 15 mm dia, Chromium Plated, 60.00 Each 0.00 #VALUE!
Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc.
complete all as specified and as directed.
Make: Cat No. LYR-38041 of JAQUAR or its equivalent model in Kohler / Cera /
Parryware/ Prayag/ Grohe

94 S & F in repairs Stop Valves/ Angle cocks, for 15 mm bore dia of pipe, Brass 110.00 Each 0.00 #VALUE!
Chromium Plated, Fancy Type, screwed down, high pressure, with crutch or butterfly
handle, screwed both ends for iron pipe or for unions etc complete all as specified and
as directed.

95 S & F in repairs Stop Valves/ Angle cocks, concealed type, with long shak and cup, for 30.00 Each 0.00 #VALUE!
15 mm bore dia of pipe, Brass Chromium Plated, Fancy Type, screwed down, high
pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for
unions etc complete all as specified and as directed.

96 S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm 80.00 Each 0.00 #VALUE!
dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or
"Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete
all as specified and as directed.

97 S & F in repairs Wall mixer, 15mm dia, Single Lever cast copper alloy, chromium 10.00 Each 0.00 #VALUE!
plated Hot and Cold with provision for connection to Overhead Shower complete with
115mm long bend pipe, connecting legs & wall flange complete [excluding hand &
overhead shower] all as specified and as directed.
Make: Jaquar Catalogue No. CON-273KNUPR or its equivalent in Kohler / Cera /
Parryware/ Prayag
98 S & F in repairs 6mm thick Looking Mirror fixed with SS Studs, first quality Belgium 50.00 Square 0.00 #VALUE!
glass, with chamfered edges complete all as specified and as directed. Metre
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 32
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
99 S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 630 40.00 Each 0.00 #VALUE!
mm X 450 mm including brass chromium plated waste fittings with long screw shanks
and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug
with rings including CI Brackets, cutting for and pinning in ends of brackets or
erecting strand, 32mm bore PVC flexible waste pipe, complete all as specified and as
directed.

100 S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, 30.00 Each 0.00 #VALUE!
including plastic water closet seat back closed pattern with flat bottom and cover and
mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap and
connecting to pipe and flush pipe complete all as specified and as directed.

101 S & F in repairs Vitreous china squatting pan "Orissa Pattern", White, size 580 mm X 80.00 Each 0.00 #VALUE!
440 mm with integral foot rests and 'P' or 'S' trap including provision of lime
concrete bedding and connecting to pipe and flush pipe complete all as specified and
as directed.

102 S & F Vitreous China Urinal, white, vertical, wall mounting type of size 20.00 Each 0.00 #VALUE!
710x480x300mm including provision of all connnected urinal accessories such as
waste coupling, waste pipe, connector pipe, PTMT urinal spreader, etc. complete all
as specified and as directed.
Make: Jaquar model cat part No URS-WHT-0704 or its equivalent in Kohler / Cera /
Parryware/ Prayag

103 Taking down existing urinal partitions of any description type and size and refixing 10.00 Each 0.00 #VALUE!
the same in position all as specified and as directed.

104 S & F in repairs 10 Litres capacity, PVC Valveless, Syphonic action type, low level 110.00 Each 0.00 #VALUE!
flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene
of low or high density of PVC, 32mm dia including brackets and connections to pipe
and flush pipe complete all as specified and as directed.

105 S & F in repairs PVC Connection of 15mm Bore and 600mm long with PTMT check nut 110.00 Each 0.00 #VALUE!
and union etc complete all as specified and as directed.

106 S & F in repairs Stainless Steel, Soap Dish, Fancy Type complete all as specified and 60.00 Each 0.00 #VALUE!
as directed.
Make: Cat No. AHS-1531 of JAQUAR or its equivalent model in Kohler / Cera /
Parryware/ Prayag/ Grohe
107 S & F in repairs Stainless steel Towel ring Round Type, Fancy type, with wall flange 60.00 Each 0.00 #VALUE!
complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 33
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
108 S & F in repairs Stainless Steel Toilet Paper Holder, Fancy type complete all as 30.00 Each 0.00 #VALUE!
specified and as directed.
Make: Jaquar Catalogue No. ACN-1151N or its equivalent in Kohler / Cera / Parryware /
Prayag/ Grohe

109 S & F 160mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ 120.00 Running 0.00 #VALUE!
solvent cement joints, fixed to walls including necessary brackets, clamps complete Metre
all as specified and as directed.

110 S & F 110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ 500.00 Running 0.00 #VALUE!
solvent cement joints, fixed to walls including necessary brackets, clamps complete Metre
all as specified and as directed.
111 S & F 110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ 60.00 Running 0.00 #VALUE!
solvent cement joints, laid in trenches or in floors complete all as specified and as Metre
directed.
112 S & F 75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ 450.00 Running 0.00 #VALUE!
solvent cement joints, fixed to walls including necessary brackets, clamps complete Metre
all as specified and as directed.
113 S & F 75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ 80.00 Running 0.00 #VALUE!
solvent cement joints, laid in trenches or in floors complete all as specified and as Metre
directed.

114 S & F in repairs UPVC Pipe of 40 mm bore, of pressure rating 10 KGf / Sq.cm in any 60.00 Running 0.00 #VALUE!
length including all fittings such as bends, tees, short pieces, connectors, elbows, Metre
reducers, sockets etc and fixed to walls, ceiling, and laid on floors with rubber ring/
solvent cement joints, complete all as specified and as directed.

115 S & F in repairs UPVC Pipe of 50 mm bore, of pressure rating 10 KGf / Sq.cm in any 80.00 Running 0.00 #VALUE!
length including all fittings such as bends, tees, short pieces, connectors, elbows, Metre
reducers, sockets etc and fixed to walls, ceiling, and laid on floors with rubber ring/
solvent cement joints, complete all as specified and as directed.

116 S & F 160 mm bore UPVC [SWR] Bends of any radius with Access Door including 10.00 Each 0.00 #VALUE!
jointing with solvent cement complete all as specified and as directed.

117 S & F 160 mm bore UPVC [SWR] Junction Single [Single "T"] equal or unequal with 4.00 Each 0.00 #VALUE!
access door including jointing with solvent cement complete all as specified and as
directed.

118 S & F 110 mm bore UPVC [SWR] Junction Single [Single "T"] equal or unequal with 30.00 Each 0.00 #VALUE!
access door including jointing with solvent cement complete all as specified and as
directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 34
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
119 S & F 110 mm bore UPVC [SWR] Junction Double [Double "T"] equal or unequal with 30.00 Each 0.00 #VALUE!
access door including jointing with solvent cement complete all as specified and as
directed.

120 S & F 110 mm bore UPVC [SWR] Bends of any radius with Access Door including 40.00 Each 0.00 #VALUE!
jointing with solvent cement complete all as specified and as directed.

121 S & F 75 mm bore UPVC [SWR] Junction Single [Single "T"] equal or unequal with 60.00 Each 0.00 #VALUE!
access door including jointing with solvent cement complete all as specified and as
directed.

122 S & F 75 mm bore UPVC [SWR] Bends of any radius with Access Door including jointing 50.00 Each 0.00 #VALUE!
with solvent cement complete all as specified and as directed.

123 S & F 110 mm bore UPVC [SWR] Reducers including jointing with solvent cement 10.00 Each 0.00 #VALUE!
complete all as specified and as directed.

124 S & F 75 mm bore UPVC [SWR] Reducers including jointing with solvent cement 20.00 Each 0.00 #VALUE!
complete all as specified and as directed.

125 S & F 110 mm bore UPVC [SWR] Vent Cowl including jointing with solvent cement 15.00 Each 0.00 #VALUE!
complete all as specified and as directed.

126 S & F 75 mm bore UPVC [SWR] Vent Cowl including jointing with solvent cement 15.00 Each 0.00 #VALUE!
complete all as specified and as directed.

127 S & F 75mm outlet UPVC [SWR] Floor trap with grating including jointing with solvent 130.00 Each 0.00 #VALUE!
cement complete all as specified and as directed.

128 S & F 75mm outlet UPVC [SWR] Multi-Floor trap with grating including jointing with 20.00 Each 0.00 #VALUE!
solvent cement complete all as specified and as directed.

129 S & F in repairs Stainless steel kitchen sink with draining board, made of stainless 2.00 Each 0.00 #VALUE!
steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass,
Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including
bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and
connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x
330 mm x 160 mm complete all as specified and as directed.
C. A. No. CWE / VIZ / of 2023 – 2024 Schedule "A" Serial Page No. 35
Rate In
Figures To be
Sl. Total Amount
Item Description Quantity Units entered by Total Amount
No. In Words
the Bidder in
₹
130 Note for Serial Item No. 1 to 129: The work shall be carried out up to 04 [Four] Storey
height and the rates quoted are deemed to be including providing double scaffolding
and safety measures as required and removal of the same on completion complete all
as specified and as directed. Nothing shall be paid extra on this account.

Total in Figures 0.00 #VALUE!

Quoted Rate in Words #VALUE!