Product data sheet METSEPM5350

Characteristics PowerLogic, Power and energy meter

Main
Range PowerLogic
Product name PowerLogic PM5350
Device short name PM5350
Product or component Power meter
type

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Complementary
Power quality analysis Total demand distortion

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
Total harmonic distortion

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Device application Power monitoring

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Type of measurement Current
Voltage
Frequency
Power factor
Energy
Phase angle
Apparent power
Active power
Reactive power
Supply voltage 85...265 V AC 45...65 Hz
100...300 V DC
Network frequency 50 Hz
60 Hz
[In] rated current 5A
1A
Type of network 1P + N
3P + N
3P
Maximum power consumption in VA 11.9 VA
Ride-through time 100 Ms 120 V AC typical
400 Ms 230 V AC typical
50 ms 125 V DC typical
Display type Monochrome graphic LCD
Display resolution 6 lines
Sampling rate 32 samples/cycle
Measurement current 5…9000 mA
Analogue input type Current 0.05...9 A (impedance <= 0.3 mOhm)
Voltage (impedance 10 MOhm)
Measurement voltage 35…480 V AC 45...65 Hz phase to phase
20…277 V AC phase to neutral
Frequency measurement range 45…70 Hz
Number of inputs 4 digital

07/08/2024
1
Measurement accuracy Current +/- 0.3 %
Voltage +/- 0.3 %
Frequency +/- 0.05 %
Power factor +/- 0.005
Active energy +/- 0.5 %
Reactive energy +/- 2 %
Active power +/- 0.5 %
Apparent power +/- 0.5 %
Apparent energy +/- 0.5 %
Reactive power +/- 2 %
Accuracy class Class 0.5S active energy conforming to IEC 62053-22
Class 0.5 active energy conforming to IEC 61557-12
Class 2 reactive energy conforming to IEC 62053-23
Class 2 reactive energy conforming to IEC 61557-12
Class 0.5 power conforming to IEC 61557-12
Number of outputs 2 relay
Information displayed Tariff (4)
Communication port protocol JBUS
Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds
Communication port support Terminal block: RS485
Data recording Min/Max of instantaneous values
Alarms
Connections - terminals Voltage circuit: screw terminal block4
Control circuit: screw terminal block2
Current transformer: screw terminal block6
Input/Output circuit: screw terminal block6
Relay output: screw terminal block4
Ethernet network: RJ45 connector
Mounting mode Flush-mounted
Type of installation For indoor use in a stationary panel
Standards IEC 61010-1
Product certifications CE[RETURN]CULus
Width 96 mm
Depth 44 mm
Height 96 mm
Net weight 0.25 kg

Environment
Electromagnetic compatibility Limitation of voltage changes, voltage fluctuations and flicker in low-voltage
conforming to IEC 61000-3-3
Electrostatic discharge conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
1.2/50 µs shock waves immunity test conforming to IEC 61000-4-5
Conducted RF disturbances conforming to IEC 61000-4-6
Immunity to impulse waves conforming to IEC 61000-4-12
Conducted and radiated emissions class A conforming to EN 55011
Limits for harmonic current emissions conforming to IEC 61000-3-2
Overvoltage category III
IP degree of protection IP30 rear: conforming to IEC 60529
IP54 display: conforming to IEC 60529
Relative humidity 5…95 % at 50 °C non-condensing
Pollution degree 2
Ambient air temperature for operation -25…70 °C meter
-20…70 °C display
-25…-20 °C (with reduced performance) display
Ambient air temperature for storage -40…85 °C
Operating altitude <= 3000 m

Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 11.200 cm
Package 1 Width 12.500 cm
Package 1 Length 12.700 cm

2
Package 1 Weight 346.000 g
Unit Type of Package 2 S03
Number of Units in Package 2 12
Package 2 Height 30.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 4.829 kg

Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation
REACh Declaration
EU RoHS Directive Compliant with Exemptions
Mercury free Yes
China RoHS Regulation
China RoHS Declaration
RoHS exemption information
Yes
Environmental Disclosure
Product Environmental Profile
WEEE The product must be disposed on European Union markets following specific
waste collection and never end up in rubbish bins

Contractual warranty
Warranty 18 months