Scribd
Upload
27 views

Assignment#1

Uploaded by

20nandini05
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

Assignment#1

Uploaded by

20nandini05
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Assignment#1

Q.1 Determine the voltage gain, input, and output impedance with feedback for voltage-series
feedback having A =-100, 𝑅𝑖 = 10 k 𝛺, and 𝑅𝑂 = 20 k 𝛺 for feedback of (a) 𝛽 = -0.1 and (b) 𝛽
= -0.5.

Q.2 If an amplifier with gain of -1000 and feedback of 𝛽 = -0.1 has a gain change of 20% due
to temperature, calculate the change in gain of the feedback amplifier.

Q.3 Calculate the gain without and with feedback for the FET amplifier circuit of Fig. 1 and
the following circuit values: 𝑅1 = 80 k 𝛺, 𝑅2 = 20 k 𝛺, 𝑅0 = 10 k 𝛺, 𝑅𝐷 = 10 k 𝛺, and 𝑔𝑚 =
4000 µS.

Fig.1

Q.4 Calculate the amplifier gain of the circuit of Fig. 2 for op-amp gain A =100,000 and
resistances 𝑅1 =1.8 k 𝛺 and 𝑅2 =200 𝛺.

Fig.2
Q.5 Calculate the voltage gain of the circuit of Fig.3.

Fig.3

Q.6 Calculate the voltage gain with and without feedback for the circuit of Fig.4 with values
of 𝑔𝑚 = 5 mS, 𝑅𝐷 = 5.1 k 𝛺 , 𝑅𝑆 = 1 k 𝛺 , and 𝑅𝐹 = 20 k 𝛺 .

Fig.4

Q.7 1. Calculate the gain of a negative-feedback amplifier having A = -2000 and 𝛽 =1/10.

Q.8 If the gain of an amplifier changes from a value of -1000 by 10%, Calculate the gain
change if the amplifier is used in a feedback circuit having 𝛽 =1/20.

Q.9 Calculate the gain, input, and output impedances of a voltage-series feedback amplifier
having A=-300, 𝑅𝑖 =1.5 k 𝛺 , 𝑅𝑂 =50 k 𝛺 , and 𝛽 =1/15.

Q.10 Calculate the gain with and without feedback for an FET amplifier as in Fig.5 for circuit
values 𝑅1 =800 k 𝛺 , 𝑅2 =200 𝛺, 𝑅3 =40 k 𝛺 , 𝑅𝐷 =8 k 𝛺 , and 𝑔𝑚 =5000 µS.
Fig.5

Q.11 For a circuit as in Fig. 6 and the following circuit values, calculate the circuit gain and
the input and output impedances with and without feedback: 𝑅𝐵 =600 k 𝛺 , 𝑅𝐸 =1.2 k 𝛺, 𝑅𝐶 =
4.7 k 𝛺 , and 𝛽 =75. Use 𝑉𝐶𝐶 =16 V.

Fig. 6

You might also like