ECO-PACTM 1

Single Phase PSW1C100 ITRMS = 96 A

AC Controller Modules VRRM = 600-1600 V

Preliminary Data Sheet

VRSM VRRM Type MN

IJ
VDSM VDRM H
(V) (V)
700 600 PSW1C 100/06
900 800 PSW1C 100/08 G
1300 1200 PSW1C 100/12
1500 1400 PSW1C 100/14
1700 1600 PSW1C 100/16
AB EF

Symbol Test Conditions Maximum Ratings Features

I TRMS TVJ = TVJM 96 A
ITAVM TC = 75 °C; 180° sine 63 A • Thyristor controller for AC (circuit
ITAVM TC = 85 °C; 180° sine 53 A W1C acc. to IEC) for mains frequency

ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 1200 A

• Isolation voltage 3000 V∼

VR = 0 t = 8.3 ms (60 Hz), sine 1300 A

• Planar glass passivated chips

TVJ = 125 °C t = 10 ms (50 Hz), sine 1100 A

• Low forward voltage drop
• Leads suitable for PC board
VR = 0 t = 8.3 ms (60 Hz), sine 1200 A
soldering
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 7200 A²s • UL registered, E 148688
VR = 0 t = 8.3 ms (60 Hz), sine 7000 A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine 6050 A²s Applications
VR = 0 t = 8.3 ms (60 Hz), sine 5970 A²s
• Switching and control of single and three
(di/dt)cr TVJ = 125 °C repetitive, IT = 150 A 150 A/µs
phase AC circuits
f=50Hz, tP=200µs • Light and temperature control
VD=2/3VDRM • Softstart AC motor controller
IG=0.45 A non repetitive,IT = ITAVM 500 A/µs • Solid state switches
diG/dt=0.45A/µs
(dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs Advantages
RGK= ∞, method 1 (linear voltage rise)
• Easy to mount with two screws
PGM TVJ = 125 °C tP=30µs ≤ 10 W
• Space and weight savings
IT =ITAVM tP=300µs ≤ 5 W
• Improved temperature and power
PGAVM 0.5 W
cycling capability
VRGM 10 V • High power density
TVJ -40... + 125 °C • Small and light weight
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V∼
IISOL ≤ 1 mA t=1s 3000 V∼
Md Mounting torque (M4) 1.5 - 1.8 Nm
14 - 16 lb.in.
Weight typ. 18 g

Data according to IEC 60747 refer to a single thyristor unless otherwise stated

POWERSEM GmbH, Walpersdorfer Str. 53  2005 POWERSEM reserves the right to change limits, test conditions and dimensions
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
 ECO-PACTM 1

Symbol Test Conditions Characteristic Value

ID,IR TVJ = 125°C, VR = VRRM, VD=VDRM ≤ 5 mA
VT IT = 200 A, TVJ = 25 °C ≤ 1.55 V
VTO For power-loss calculations only 0.85 V
rT 4.0 mΩ
VGT VD=6V TVJ= 25°C ≤ 1.5 V
TVJ=-40°C ≤ 1.6 V
IGT VD=6V TVJ= 25°C ≤ 100 mA
TVJ=-40°C ≤ 200 mA
VGD TVJ= 125°C VD=2/3VDRM ≤ 0.2 V
IGD TVJ= 125°C VD=2/3VDRM ≤ 10 mA
IL TVJ= 25°C, tP=10µs, VD=6V ≤ 450 mA
IG=0.45A, diG/dt=0.45A/µs
IH TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤ 2 µs
IG=0.45A, diG/dt=0.45A/µs
tq TVJ= TVJM; IT=120A; tp=200µs;-di/dt=10A/µs typ. 150 µs
VR=100V; dv/dt=20V/µs; VD=2/3VDRM
RthJC per thyristor; DC 0.53 K/W
per module 0.27 K/W
RthJK per thyristor; sine 180° el typ. 0.73 K/W
per module typ. 0.37 K/W
ds Creeping distance on surface 6.6 mm
dA Creeping distance in air 9.7 mm
a Max. allowable acceleration 50 m/s²

Package style and outline

Dimensions in mm (1mm = 0.0394“)

POWERSEM GmbH, Walpersdorfer Str. 53  2005 POWERSEM reserves the right to change limits, test conditions and dimensions
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20