Addocat 726 B en RCR
Addocat 726 B en RCR
Addocat® PU ADDITIVES
726 B
Function
Catalyst for the production of rigid polyurethane foam
Product description
Chemical composition: dimethylcyclohexylamine
Flash point: 41 °C
(DIN 51755)
Product information
Addocat 726 B catalyses the gas and crosslinking reaction of rigid
polyurethane systems.
Dosage:
1-3 p.b.w., calculated on 100 p.b.w. polyol. In the foam filling of intricately
shaped cavities Addocat PV or Addocat 108 is used at 0.1 -
0.3 p.b.w. as a co-catalyst in combination with Addocat 726 B.
Addocat 102 (at 0.5 - 1.5 p.b.w.) has proved particularly suitable
as a co-catalyst in the production of sandwich panels.
Application:
Insulation of refrigerators and foam filling of intricately shaped cavities.
Continuous and discontinuous production of building board (foam thick-
ness < 80 mm; also with rigid or metal facings) and of insulating panels
with flexible facings (foam thickness 15-100 mm). Production of insulations
by the layer-by-layer method.
Packing
metal drums, contents 160 kg
IBC, contents 800 kg
Handling
Consult material safety data sheet (MSDS) for additional handling
information for Addocat 726 B.
Our technical advice - whether verbal, in writing or by way of trials - is given in good faith but without warranty, and this also applies where
proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their
suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore,
entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods
delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale
and Delivery.