Scribd
Upload
14 views

Addovate TX en RCR

addovate_tx_en_rcr

Uploaded by

asgharmahmood564
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Addovate TX en RCR

addovate_tx_en_rcr

Uploaded by

asgharmahmood564
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Addovate® PU ADDITIVES
TX

Function
Emulsifier/Stabilizer for the production of polyurethane polyester
flexible slabstock foam.

Product description
Chemical composition: Preparation of sulphonated
hydrocarbons

Physical appearance: brown liquid

Density (20 °C): approx. 0.99 g/cm³

Initial boiling point: approx. > 100 °C

Pour point: approx. - 5 °C

Flash point: > 100 °C


(ASTM-D 93, DIN EN 22719)

Miscibility with water dispersible

Acid number 7.0 ± 1.0 mg KOH/g

Water content max. 1.0 %

Viscosity (25 °C) 350 ± 100 mPa.s

Product information
Before processing Addovate TX has to be thoroughly homogenised by rolling or tumbling the drums or stirring
the contents. Addovate TX is usually used in combination with Addovate EM in the manufacture of polyester
slabstock foam.With a combination of Addovate TX / Addovate EM, good foaming control resulting in fine cell
structure can be achieved. The proportions which should be used are 1.0-3.0 p.b.w. Addovate TX to 100.0
p.b.w. polyester polyol. The following sequence for adding the individual components has proven effective in the
manufacture of catalyst compounds: water, catalyst, Addovate EM, Addovate TX. A clear, homogeneous
mixture is produced.

WARNING: When mixing with other emulsifiers or additives, it is advis-


able to carry out laboratory tests for compatibility, as incompatibilities
may cause defects in the cellular structure.

Packing
Metal drums, contents 180 kg
Containers, contents 900 kg

Page Version: Revised: Printed on:


1 of 2 3/23. Aug 2011 12-15-2014 12-15-2014
Storage stability
Addovate TX should be stored at a temperature of 10 - 25 °C (optimal storage temperature) if possible. In the
colder season of the year it may occur that Addovate TX becomes fully or partly crystalline during transport. In
this case the product should be stored at a temperature between 20 - 25 °C where it will become liquid within 1 -
2 weeks. Exposure to higher temperatures should be avoided, particularly over long periods of time. Addovate
TX is mildly hygroscopic. To prevent it from adsorbing water from the atmosphere, the container should always
be resealed tightly after use. The shelf life of
Addovate TX is 6 months (originally packed).

Handling
Consult material safety data sheet (MSDS) for additional handling
information for Addovate TX.

Our technical advice - whether verbal, in writing or by way of trials - is given in good faith but without warranty, and this also applies where
proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their
suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore,
entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods
delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale
and Delivery.

Rhein Chemie Rheinau GmbH Rhein Chemie Corporation


Duesseldorfer Strasse 23-27 145 Parker Court
68219 Mannheim, Germany Chardon, OH 44024, USA
Tel.: +49-621-8907-0 Telefon: +1 440-285-3547
Fax: +49-621-8907-675 Fax: +1 440-285-2462
E-Mail: [email protected] [email protected]
www.rheinchemie.com

Rhein Chemie Japan Ltd. Lanxess Chemical (China) Co.Ltd.


Marunouchi Kitaguchi, Bldg. 23 F Business Unit Rhein Chemie
1-6-5 Marunouchi, Chiyodo-ku 16F, Park Place
Tokyo 100-0005, Japan NO. 1601, Nanjing Road (West)
Telefon: +81-03-5293-8041 Shanghai 200040, VR China
Fax: +81-03-5219-9779 Telefon: +86-21-6109 8308
[email protected] Fax: +86-21-6109-8309
[email protected]

Page Version: Revised: Printed on:


2 of 2 3/23. Aug 2011 12-15-2014 12-15-2014

You might also like