Scribd
Upload
4 views

Lab 05

Uploaded by

محمد عکاشہ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Lab 05

Uploaded by

محمد عکاشہ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Experiment 5

Designing a Combinational Circuit using Logic Gates


(Open Ended Lab)
Objective

• Design, construct and test combinational circuits using logic gates.

Design Problem

Design a combinational circuit with four inputs A, B, C and D and one output F. F is to be
equal to 1 when A = 1, provided that B = 0, or when B = 1, provided that either C or D is
equal to 1. Otherwise, the output is equal to 0.

Design, draw and implement the circuit using any type of logic gates with minimum number
of ICs.

• Obtain the truth table of the circuit and simplify the output function.
• List out the ICs required.
• Write down the steps of the procedure.

Tools/Equipment Requirement

Identify and list down

Procedure

Logic/Circuit Diagram
\

Observations/Truth Table Conclusion

You might also like