Scribd
Upload
841 views

Lab - 07 - To Control One Bell From Three Different Places With Indicator Lamps.

To control one bell from three different places with indicator lamps.

Uploaded by

Tuhin Saha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
841 views

Lab - 07 - To Control One Bell From Three Different Places With Indicator Lamps.

To control one bell from three different places with indicator lamps.

Uploaded by

Tuhin Saha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Building Electrification Lab.

Experiment No.: - 07

Experiment Name: - To control one bell from three different places with indicator lamps.

Objective: -

1. To understand the working of call bell circuit.


2. To find out the purpose of call bell circuit.

List of Tools: -

Sl. No. Name of Item Specification Quantity Remarks


1 Insulated screwdriver 250 mm 1 As Working
2 Tester 110 mm, 500 volt 1 As Working
3 Cutting pliers 150 mm 1 As Working
4 Combination pliers 200 mm 1 As Working
5 Ball peen hammer 200 gm 1 As Working
Self-adhesive PVC tap
6 Insulation tap 1 As Working
6m × 1.70m × 0.125 mm
7 Drill machine -/- 1 As Working
8 Hand Saw 260 mm 1 As Working

Theory: -

In this system where a bell is controlled from three different locations, a special circuit design is
required to ensure that the bell can be activated from any switch while providing visual feedback (via
indicator lamps) at each location. This can be accomplished using push switch, along with an indicator
lamp connected with the bell.

Connection Diagram: -

Connection Diagram of Call Bell Circuit

Page - 1
Building Electrification Lab.

Wiring Diagram: -

Wiring Diagram of Call Bell Circuit

Estimated List of Materials: -

Sl. No. Name of Item Specification Quantity Remarks


1 Switch Board 4”×4”×2” 3 As Working
2 Lamp Holder Batten Holder, B22 3 As Working
3 Electric Bell 240 volt 1 As Working
5 Push Switch 240 volt, 6 amp 3 As Working
6 Red Led 240 volt, 3 Watt 3 As Working
7 Fuse 5 amp 1 As Working
1100 volt grade 1.5
As per
8 Connecting Wires sq.mm, 6 core copper As Working
requirement
PVC cable
As per
9 Wood Screw -/- As Working
requirement

Procedure: -

1. Collect the necessary tools, instruments and materials to prepare call bell circuit.
2. Mark positions of switches on the boards to connect the switches with the lamp and the bell.
3. Install push switch at the marked locations on board and Fix the lamp holder at the designated
position. Ensure they are securely fastened to prevent movement.
4. Connect the wires as per the circuit diagram.
5. Power on the circuit and test the lamp functionality of call bell circuit.

Precautions: -

1. Verify that all wires, tools, and components are well-insulated to prevent accidental shocks.
2. Before handling or modifying any circuit, ensure the power supply is turned off.
3. Do not directly touch any exposed electrical conductors or terminals when the circuit is live.
4. Ensure that all devices, components, and tools used are rated for the voltage and current levels
in the experiment.
5. Keep the work area dry and avoid using wet hands while handling electrical components.

Page - 2
Building Electrification Lab.

Conclusion: -

By performing this experiment we have learnt how a call bell can control from three different placed
by using three push button along with the indicator lamp. We have also learn the application of call
bell circuit.

Submitted by: - Tuhin Saha

Page - 3

You might also like