0% found this document useful (0 votes)
7 views

Assignment No. 6 (Sept. 20, 2024) - Serviceabilty

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
7 views

Assignment No. 6 (Sept. 20, 2024) - Serviceabilty

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASSIGNMENT NO.

5
SERVICEABILTY

Problem solving. Show all your calculations. No solutions, no credit. Write the answer on
the space provided after each question. Use three decimal places.
SITUATION 1
A reinforced concrete beam is 350mm wide by 600mm deep. The beam is simply supported over a span
of 8m and carries a uniform DL= 11 KN/m including its own weight and a uniform LL= 15 KN/m. The
beam is reinforced for tension only with 6- 25mm ϕ bars as shown in the figure. fc’= 20.7 MPa, fy= 344.8
MPa, fr= 2.832 MPa, Econc= 21,650 MPa and Es= 200 GPa.
1, Calculate the cracking moment in KN.m. Ans. ________________

2. Calculate the cracked moment of inertia in mm4. Ans. ________________

3. Calculate the effective moment of inertia in mm4. Ans. ________________

4. Calculate the maximum instantaneous deflection due to service loads in mm. Ans. _________

5. Calculate the deflection for the same loading after 5 years, assume that 40% of the live load
is sustained in mm. Ans. ______________

You might also like