Revision date: 23/04/2015 Revision: 4

SAFETY DATA SHEET

MOTORCYCLE CLEANER

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name MOTORCYCLE CLEANER

Product number MC001, MC001SW/F

Internal identification BMC/TM/2/090615

1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Detergent for motorcycles

1.3. Details of the supplier of the safety data sheet

Supplier Autoglym
Works Road
Letchworth
Herts
SG6 1LU
UK
[email protected]

1.4. Emergency telephone number

Emergency telephone +44 (0) 1462 489498 (24Hrs)

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (EC 1272/2008)
Physical hazards Not Classified

Health hazards Not Classified

Environmental hazards Not Classified

2.2. Label elements

Hazard statements NC Not Classified

Detergent labelling < 5% anionic surfactants, < 5% non-ionic surfactants

2.3. Other hazards

SECTION 3: Composition/information on ingredients

3.2. Mixtures

Butoxypropan-1-ol 1-5%
CAS number: 29387-86-8 EC number: 249-598-7

Classification
Skin Irrit. 2 - H315
Eye Irrit. 2 - H319

1/6
Revision date: 23/04/2015 Revision: 4

MOTORCYCLE CLEANER

Alcohols, C12-14, ethoxylated, sulfates, sodium salts 1-5%

CAS number: 68891-38-3 EC number: 500-234-8 REACH registration number: 01-
2119488639-16-XXXX

Classification
Skin Irrit. 2 - H315
Eye Dam. 1 - H318
Aquatic Chronic 3 - H412

Glycerine 1-5%
CAS number: 56-81-5 REACH registration number: 01-
2119471987-18-XXXX

Classification Classification (67/548/EEC or 1999/45/EC)

Not Classified -

Alcohols, C6-12, ethoxylated 1-5%

CAS number: 68439-45-2

Classification Classification (67/548/EEC or 1999/45/EC)

Acute Tox. 4 - H302 Xn;R22. Xi;R41.
Eye Dam. 1 - H318

The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation Remove person to fresh air and keep comfortable for breathing.

Ingestion Do not induce vomiting. Get medical attention immediately.

Skin contact Rinse immediately with plenty of water. Take off contaminated clothing and wash it before
reuse. Get medical attention if any discomfort continues.

Eye contact Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes and get
medical attention. Remove any contact lenses and open eyelids wide apart. Rinse with water.
Get medical attention.

4.2. Most important symptoms and effects, both acute and delayed
Eye contact May cause temporary eye irritation.

4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations.

SECTION 5: Firefighting measures

5.1. Extinguishing media

Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.

5.2. Special hazards arising from the substance or mixture

Hazardous combustion Oxides of carbon.
products

5.3. Advice for firefighters

2/6
Revision date: 23/04/2015 Revision: 4

MOTORCYCLE CLEANER

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions Follow precautions for safe handling described in this safety data sheet. Take precautionary
measures against static discharges. Provide adequate ventilation.

6.2. Environmental precautions

Environmental precautions Spillages or uncontrolled discharges into watercourses must be reported immediately to the
Environmental Agency or other appropriate regulatory body. Avoid discharge into drains or
watercourses or onto the ground.

6.3. Methods and material for containment and cleaning up

Methods for cleaning up Absorb spillage with inert, damp, non-combustible material. Flush contaminated area with
plenty of water. Collect and place in suitable waste disposal containers and seal securely.
Dispose of contents/container in accordance with local regulations.

6.4. Reference to other sections

Reference to other sections Wear protective clothing as described in Section 8 of this safety data sheet.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Usage precautions Avoid contact with skin and eyes.

Advice on general When using do not eat, drink or smoke. Wash hands thoroughly after handling.
occupational hygiene

7.2. Conditions for safe storage, including any incompatibilities

Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place. Keep only in
the original container.

7.3. Specific end use(s)

Specific end use(s) The identified uses for this product are detailed in Section 1.2.

SECTION 8: Exposure Controls/personal protection

8.1. Control parameters

Occupational exposure limits
Glycerine
Long-term exposure limit (8-hour TWA): WEL 10 mg/m³ mist
WEL = Workplace Exposure Limit

8.2. Exposure controls

Protective equipment

Appropriate engineering Provide adequate ventilation.

controls

Eye/face protection Wear eye protection. EN 166:2001

3/6
Revision date: 23/04/2015 Revision: 4

MOTORCYCLE CLEANER

Hand protection Wear protective gloves made of the following material: Nitrile rubber. The breakthrough time
for any glove material may be different for different glove manufacturers.

Hygiene measures Wash at the end of each work shift and before eating, smoking and using the toilet.

Respiratory protection Respiratory protection not required.

SECTION 9: Physical and Chemical Properties

9.1. Information on basic physical and chemical properties

Appearance Clear liquid.

Colour Pink.

Odour Detergent.

Odour threshold No information available.

pH pH (concentrated solution): 12.5

Melting point No information available.

Initial boiling point and range 100°C

Flash point Not applicable.

Evaporation rate No information available.

Evaporation factor No information available.

Upper/lower flammability or No information available.

explosive limits

Vapour pressure No information available.

Vapour density No information available.

Relative density ~ 1.02

Bulk density No information available.

Solubility(ies) Miscible with water.

Partition coefficient No information available.

Auto-ignition temperature No information available.

Decomposition Temperature No information available.

Viscosity No information available.

Explosive properties No information available.

9.2. Other information

SECTION 10: Stability and reactivity

10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.

10.2. Chemical stability

Stability Stable at normal ambient temperatures and when used as recommended.

10.3. Possibility of hazardous reactions

Possibility of hazardous No potentially hazardous reactions known.
reactions

4/6
Revision date: 23/04/2015 Revision: 4

MOTORCYCLE CLEANER

10.4. Conditions to avoid

Conditions to avoid No specific requirements are anticipated under normal conditions of use.

10.5. Incompatible materials

Materials to avoid Avoid contact with the following materials: Strong acids. Strong alkalis.

10.6. Hazardous decomposition products

Hazardous decomposition Not known.
products

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Acute toxicity - oral
ATE oral (mg/kg) 30,959.75

General information This product has low toxicity. Only large quantities are likely to have adverse effects on
human health.

SECTION 12: Ecological Information

Ecotoxicity The product is not expected to be hazardous to the environment.

12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
Bioaccumulative potential Not determined.

Partition coefficient No information available.

12.4. Mobility in soil

12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB This product does not contain any substances classified as PBT or vPvB.
assessment

12.6. Other adverse effects

SECTION 13: Disposal considerations

13.1. Waste treatment methods

General information Dispose of waste product or used containers in accordance with local regulations

Disposal methods Dispose of contents/container in accordance with local regulations.

SECTION 14: Transport information

General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).

14.1. UN number
Not applicable.

14.2. UN proper shipping name

Not applicable.

14.3. Transport hazard class(es)

5/6
Revision date: 23/04/2015 Revision: 4

MOTORCYCLE CLEANER

No transport warning sign required.

14.4. Packing group

Not applicable.

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant

No.

14.6. Special precautions for user

Not applicable.

14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU legislation Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).

15.2. Chemical safety assessment

SECTION 16: Other information

Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision.

Revision date 23/04/2015

Revision 4

SDS number 21719

Hazard statements in full H302 Harmful if swallowed.

H315 Causes skin irritation.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.

Signature Daniel Higgs

This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.

6/6