Scribd
Upload
120 views2 pages

ABB Split Phase Capacitor Brochure

Uploaded by

adhil thangal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
120 views2 pages

ABB Split Phase Capacitor Brochure

Uploaded by

adhil thangal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PowerIT High Voltage Power Capacitor CHD

Split Phase
Economical Alternative To Two Single-phase Capacitors
General Operating Conditions

The ABB split-phase capacitor unit type CHD combines two Temperature range -10/+50oC
capacitors in a single housing. The split-phase capacitor units Location Outdoor or indoor
provide an economical double star (Y-Y) unbalance detection Altitude ≤ 1000m above sea level
scheme using only three units, compared with conventional
designs using six units. This is particularly advantageous in low Capacitor Container
power capacitor banks in Fixed, Enclosed and Pole Mount
capacitor applications. The capacitor unit has three bushings Material Stainless steel, 304 high-grade
consisting of one common terminal and two capacitor output Colour Storm grey N42 (AS 2700)
terminals. Finish Matt
Fixing brackets One or two per side
The split-phase capacitor can be used in applications as an
economic alternative. Three units can be used in a two-stage Terminations
switched system, providing an economical and space saving
alternative to utilizing six conventional capacitors. Alternatively, it Bushings Grey porcelain, three
can be used as a dual tap capacitor or as a redundancy in critical Terminals M16 x 3
applications. Clamps Nickel-coated brass, ≤. 2x70mm2
Fixing Two 11x16mm holes, 397mm centres
The split-phase capacitors are supplied unfused as standard.
Internally fused designs are available upon request. Dimensions and Data (typical)
The split-phase capacitor has two sections with a common Unit rating > 3.3kV Unit rating ≤ 3.3kV
terminal. Each section is sized evenly as standard, however they
can be sized unevenly upon request.

Connection Arrangement

Quality Assurance and Environment

ABB is certified according to ISO 9001 (quality) and ISO 14001


(environment). 50Hz 60Hz
kvar A B A B kg

Standards 50 (25+25) 250 200 250 200 27


100 (50+50) 250 200 250 200 27
AS 2897, IEC 60871 or other standards on request. 150 (75+75) 300 225 300 225 28
200 (100+100) 350 250 300 225 35
Technical Data 300 (150+150) 450 225 400 200 43
400 (200+200) 550 275 500 250 51
Power 800 (400 + 400) 500 (250+250) 650 325 600 300 59
Voltage range Up to 17.5kV line to line 600 (300+300) 800 400 650 325 71
Up to 10.1kV line to common 700 (350+350) 900 450 750 375 79
Frequency 50/60Hz 800 (400+400) 1000 500 850 425 87
Current Max. 180A
2GSA 100007 ed. 01 (05-2004)

Dielectric Polypropylene film BIL C Notes:


Impregnant Jarylec C101 (non-PCB) All dimensions are in millimetres
40 115
Discharge resistors Built-in Dimension D equals 115mm
Losses ≤ 0.15 W/kvar including resistors 60 140 All dimensions are subject to
change without notice
95 215
150 295

ABB Australia Pty Limited


ABN 68 003 337 611 This product has been certified by ABB Group as Industrial IT Enabled™ - Information Level.
88-120 Beresford Road All product information is supplied in interactive electronic format, based on ABB Aspect Object™
technology. The Industrial IT commitment from ABB ensures that every enterprise building block is
Lilydale Vic 3140 Australia equipped with the integral tools necessary to install, operate, and maintain it efficiently throughout the
product lifecycle.

While care has been taken to ensure that the information contained in this document is correct, no
Phone: +61 3 9735 7333
HOPEAD 5/04 #9419

responsibility can be accepted for any inaccuracy. We reserve the right to alter or modify the information
contained herein at any time in the light of technical or other developments. Technical specifications are
Fax: +61 3 9735 3863 valid under normal operating conditions only. We do not accept any responsibility for any misuse of the
Internet: www.abb.com product and cannot be held liable for indirect or consequential damages. Technical data and design can
be subject to change and should be confirm prior to ordering.

You might also like