0% found this document useful (0 votes)
13 views2 pages

040 Sanicondens en

SANI CONDENS PUMP

Uploaded by

Ameer Mohammed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
13 views2 pages

040 Sanicondens en

SANI CONDENS PUMP

Uploaded by

Ameer Mohammed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL SPECIFICATIONS

CONNECTIONS
Sanicondens® Condensate Pump

AIR
BOILER
CONDITIONER

HVAC

APPLICATIONS

RESIDENTIAL COMMERCIAL

Example of installation. Follow local plumbing codes for actual install.

The Sanicondens is a small pump used to pump condensate from condensing boilers,
HVAC systems, water heater systems, etc. The Sanicondens will pump condensate waste
up to 15 feet in height and/or 150 feet away from a soil stack.

Discharges the condensate waste through a 3/8” vinyl tube. A non-return valve is
included on the discharge connection provided with the system.
The small, powerful pumping unit can be floor or wall mounted. It comes with provisions
for already-to-wire connection to an external overflow switch that will shut down the
appliance or alert the consumer in the event of overflow. It also includes all necessary
hardware for ease of installation; 20 Ft of vinyl tubing, inlet adapter, discharge adapter.
Discharges condensate from a condensing boiler or other condensate producing
fixtures.
The condensate will drain into the system via two 1” inlets located on top of the
enclosure.

AN EASY SOLUTION TO
Drain PUMP CONDENSATE
PUMPING DISTANCE
AWAY FROM
CONDENSING BOILERS
15 Ft
AND AIR CONDITIONERS
ain

One of the most powerful


Dr

and quiet condensate



/8

Drain pumps on the market with


ø3

features that no competitor


can match.
15 ft vertical
The two-quart capacity
condensate pump comes
150 Ft equipped with all the
necessary hardware for
easy installation. It can be
installed on top of a flat
surface or mounted on a
wall.

Sanicondens • PART NO 040


TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS

PLEASE CALL US TOLL-FREE AT TECHNICAL SPECIFICATIONS


800-571-8191 (US) / 800-363-5874 (CDN) Pump type:
TO PURCHASE PARTS REFERENCED BELOW
Condensate Pump
Electrical:
120 V – 60 Hz / 1.5 Amps (Max)
Motor:
1/30 HP oil-filled thermally protected motor
Operating Temperature:
160°F Max
Power cord length:
60 inches
Noise level:
≤ 44 dBA (Lp) (measured at 3 ft.)
Discharge pipe diameter:
3⁄8”
Discharge rate at 15 ft:
30 GPH
Discharge rate at 3 ft:
86 GPH
Normal running time:
3-5 seconds (Short bursts)
Capacity:
0.5 gallons / 1.9 liters
Inlets:
1” (top)
Method of activation:
Float/microswitch
Weight:
7 lbs / 3.1 kg
Certifying agencies:
CSA (IPC, NSPC)
Connections:

DIMENSIONAL DRAWINGS Condensing boiler, HVAC systems,


air conditioners
9-1/2" 5-5/8"
Flow Rate (liters/hour)
75.7 125.7 175.7 225.7 275.7 325.7 375.7
15

4
Vertical Distance (Feet)

10 3
Vertical Distance (m)
6-5/8"

0 0
20 30 40 50 60 70 80 90 100

Pump away condensate from any HVAC application! Flow Rate (gallons/hour)

You might also like