NET FLYWHEEL POWER 57 kW / 76 HP

OPERATING WEIGHT (max) 9460 Kg

BUCKET CAPACITY 0.05 - 0.29 m3

 FIAT-HITACHI
MIDI EXCAVATORS
RELIABILITY
PRODUCTIVITY
VERSATILITY
COMFORT
ACCESSIBILITY
The new FIAT-HITACHI midi 4.2 l emissioned Perkins engine On-board Computer
excavators offer technological features • Low rpm = quiet operation and low
of comfort, performance, and reliability fuel consumption
at the top of what the market has • Low piston linear velocity = less
available today. wear
Machines designed and built to • Low HP/l ratio = longer life
• Satisfy the most demanding Features that ensure long-lasting
customers and operators reliability.
• Offer easy operation, precision and
productivity in all maintenance and
tough digging jobs
• Operate in the most cramped areas
and the toughest working conditions
• Ensure total reliability and unit
availability
• Guarantee operators have the best
place to work in terms of comfort,
easy and safe operation
NEW MIDI FIAT-HITACHI
WHEEL EXCAVATORS:
COMPACT BUT BIG IN
EVERYTHING

Superstructure slewing with the SPC (Swing Pressure Control) device

The SPC acts “automatically” on superstructure slewing pump delivery for
immediately available pressure and precise response to slewing control or
peerless soft superstructure stopping.

The 3- transfer and 3-operating 6-

speed hydrostatic transmission
means selecting proper transfer of
operating speed with top precision.
The variable displacement hydraulic Sturdy oil bath disc brake axles.
motor guarantees constant speed Both steering oil bath disc brakes
adjustment to the tractive effort ensure soft and effective braking. This
demanded to ensure top speed or solution eliminates the need for brake
steep slope coverage. adjustment.
The new LOAD SENSING hydraulic system with variable delivery double pump
and closed centre main hydraulic control valve ensures great application
versatility and excellent operating performance when digging, levelling, finishing
and moving dirt. The CS Cross Sensing device enables you to exploit all engine
power on one function only or its optimum automatic distribution in simultaneous
movements of superstructure slewing, boom lifting and dipper stick boom opening.

Grease bath circle

 FIAT-HITACHI
MIDI EXCAVATORS
RELIABILITY
New double proof electrical Hew hydraulic hoses with front seals
connections All hydraulic hoses feature front seals
The new double proof electrical to prevent all possible oil leaks.
connections ensure total protection The same system as used on higher-
against humidity and possible liquid class FIAT-HITACHI crawler
infiltration. excavators.
All electrical wires are coded for easy
identification of the function they are
connected to.

HD Heavy Duty booms for severe applications

The booms on the new FIAT-HITACHI midi excavators are designed and built with
state-of-the-art CAD-CAM technologies for top reliability and top performance.
The boom to frame connection area is reinforced to guarantee the same
performance level and reliability even when working slewed.
Robot controlled industrialised boom guarantees high quality standards.

New main hydraulic control valve

The new pressure compensation main
hydraulic control valve with anti-
saturation valves guarantees not only
perfect excavator controllability but also
features constructional items such as
controlled balance rods, delivery pre-
adjustment and the like for long-lasting
top reliability
New hydraulic oil and engine New generation engine rpm
coolant radiators adjustment
New design and increased radiating The new FIAT-HITACHI midi wheel
mass for regular operation even in the excavators feature the innovative
hottest climates. The special blade STEP MOTOR adjustment system.
design and optimum radiator location This device connected to the on-board
ensure excellent accessibility and easy computer and the accelerator
cleaning. potentiometer hand control ensures
constant and precise engine rpm
adjustment.
 FIAT-HITACHI
MIDI EXCAVATORS
PERFORMANCE
The clamshell bucket rotation One-piece bucket control rod.
feature reaching the dipper stick and Top reliability and fast bucket
predisposition for the hammer system replacement.
are supplied standard. Great bucket opening angle for easy
plinth digging.

Specific antidrop valves are supplied as standard equipment on the

positioning, slewing, blade and axle locking cylinders to ensure booms remain
exactly in the position selected for safe operation.

Damped travel end hydraulic

cylinders
The special design of the hydraulic
travel ends inside the cylinders
guarantees:
• Soft manoeuvres
• No cylinder or boom stress
• Increased operator comfort

1490
Exceptional precision and productivity
The LOAD SENSING hydraulic system with UNLOADING valve features
precision and operating speed to simplify even the toughest jobs such as levelling,
which requires combined finishing and backfill compacting.

Totally simultaneous movements

The new technology of its components
means the hydraulic system features
simultaneous movements at speed
independent of pressure for different
uses.
The outcome is outstanding
operating speed coupled with
perfectly homogeneous movements.

Reduced
superstructure
slewing (1490 mm)
matched with boom
wing means operating in
cramped areas and
reducing unit overall
dimensions in road
maintenance jobs.
 FIAT-HITACHI
MIDI EXCAVATORS
VERSATILITY
4-wheel steering.
The two steering axles are a feature that increases the versatility of these
machines.
The advantages: selection of three different types of steering action:
• 1 axle, for normal on the road and yard transfers
• 2 axles, where reduced steering radius is needed to move in very cramped areas
(only 3.6 m steering radius at the wheel outside)
• crab steering, to move sideways with the wheel parallel and approach/leave the
operating area without complicated manoeuvres
Recovery of precise rear wheel alignment is indicated with a special light.

Steering selector easy to reach and

actuate.

Wall side digging.

Optimum boom swing and design enables the operator to position the unit perfectly at the wall side. Crab steering means the
operator can approach and leave the digging area with very simple manoeuvres.

Possible versions of the basis wheel

unit.
Stabiliser blade and/or stabilisers.
Its robust construction gives the excavator excellent operating stability. Note the
614-mm blade lift height for 36° high ramp angle. Both the blade and the stabilisers
are supplied standard with lock valves, to guarantee operator safety.

FH90W side digging version.

The ideal choice for trenching in urban
maintenance jobs and wherever
operations require small overall
dimensions, easy movements, and
versatility.
Easy digging beyond the wall side
both sides.
Perfectly vertical side digging.
Great performance.
 FIAT-HITACHI
MIDI ESCAVATORS
COMFORT
Continuous adjustment tiltable The motorcar-style front instrument
operator seat panel enables full operator control of:
The tiltable steering wheel enables • travel speed
personalised operator positions and • speed selected
features maximum visibility to the • braking system pressure
digging area. • steering mode selected
On the right, the ergonomic and easily
actuated control switch and axle lock.

Comfortable cab with ample glass areas

Transparent upper canopy for maximum visibility at full height. Multi-function hand controls
Rear sun shield. Ample glass area for complete visibility both on the job and on- Enable actuation of all excavator
road transfers. functions, including the stabilisers, the
blade and all supplementary hydraulic
functions, such as the hammer for
instance, without having to remove the
hand from the controls.

Wide operators seat with armrests

supplied standard for improved
operator comfort.
On-board electronic instrument Potentiometer hand accelerator
panel for immediate level checks Precise and easy engine rpm selection.
When actuated, push button E
enables fuel consumption reduction
for all jobs not requiring maximum
productivity.

The operator compartment

A comfortable working environment is
the basis of daily productivity.
• Ample internal room
• Rational control location
• Efficient ventilation system
• Quiet operation
 FIAT-HITACHI
MIDI ESCAVATORS
ACCESSIBILITY
Fuel purging pump, fuel and air Batteries easily accessed from
filters positioned for easy ground level, automatic battery cutout
maintenance. device.

Completely liftable fibreglass reinforced rear cover to access the rear of the unit
for easy and fast maintenance.
Hinged side panels openable from the inside to easily access the radiator, the
pumps, and the main control valve.
Anti-vandalism locks

Easily accessed fuse box holder

Spacious tool kit compartment.

Quick-disconnect PTOs. Standard key for engine start and all
doors

An easy compartment to access and

leave
Positioning of the ladder and cab door
means the operator can enter and
leave the machine in absolute safety
and with the greatest of ease.
TECHNICAL FEATURES

“EUROMOT 1 emissioned” ENGINE TRANSMISSION

Rated power (ISO/TR 14396) ........................76 HP / 57 kW Hydrostatic 4-wheel drive. The hydraulic motor operates
Rated rpm (transfer) ....................................................2000 through an electro-hydraulic shift for two speed ranges.
Rated power (EEC 80/1269) ..........................71 HP / 53 kW Travel speed ..............................................................km/h
Operational rated rpm ..................................................1800 1st ..............................................................................0 - 10
Make and model ....................................PERKINS - 1004.42 2nd ............................................................................0 - 20
Type ........diesel, 4 stroke, direct injection, natural aspiration 3rd..............................................................................0 - 30
Number of cylinders ............................................................4 Maximum slope ..............................................................16%
Displacement ..........................................................4233 cm3 Operating speed ........................................................km/h
Bore and stroke ..............................................103 x 127 mm 1st ..............................................................................0 - 4
“Auto Idling” device to return engine automatically to 2nd ............................................................................0 - 7
minimum rpm with controls in neutral. The device can be 3rd ............................................................................0 - 11
cutout manually with the switch in the cab. Maximum slope ..............................................................60%
Engine rpm electronic control with a knob hand control.
Pushbutton E (Economy) to reduce fuel consumption. AXLES
Cold start device for easy engine starts down to - 18 °C
outside temperature.
Oil bath disk brake axles.
Rear axles: steering, rigid.
Front axles: steering, oscillating:
ELECTRICAL SYSTEM total oscillation ................................................................15°
vertical travel ..........................................................290 mm
Operating voltage............................................................24 V The front axle can be locked hydraulically at any position.
Batteries in series, maintenance free ..................................2
Rating............................................................................75 Ah
Alternator ........................................................................55 A STEERING
Starter ............................................................................4 kW
Selection of 3 steering modes: 2 wheels, 4 wheels, crab.
Steering mode selection with a selector in the cab, rear
HYDRAULIC SYSTEM wheel alignment indicated with a light in the cab , steering
mode selection indicated in the cab with lights and
New “Load Sensing” hydraulic system with implement ideograms.
control closed centre and CS Cross Sensing type Steering type ..........................ORBITROL with safety valves
superstructure slewing circuit for simultaneous Pump ......................................................................gear type
movements. Double effect double stem cylinder
SPC Swing Pressure Control Device for top controllability Steering can be with engine cut out and excavator on the
and operating comfort during superstructure accelerations move.
and stops. Steering radius at tyre outside:
Main pumps: front axle steered ....................................................6000 mm
1 variable delivery piston type pump for implement/travel rear and front axles steered ....................................3600 mm
control
maximum delivery..................................................150 l/min
maximum operating pressure ..................................350 bar BRAKING SYSTEM
1 variable delivery piston type pump for superstructure
slewing control Service: oil bath disk type on the 4 wheels with double
maximum delivery....................................................50 l/min independent circuit.
maximum operating pressure ..................................310 bar Parking: multiple oil bath disk type. Mechanically applied,
Cylnders: number bore x stroke electro-hydraulically released.
lift ........................................1..........................100 x 750 mm Emergency: double independent circuit to ensure braking
digging ................................1..........................100 x 750 mm on at least one axle in case of failure.
*positioning ........................2............................70 x 610 mm Operating: on service brakes.
bucket ................................1............................70 x 750 mm
swing ..................................1..........................100 x 550 mm
blade ..................................2............................80 x 200 mm
TYRES
*(only triple articulation)
Cylinders with hydraulic travel end stop for less stress on Sizes available ................8.25 - 20 twinned, with spacer ring
implements and greater operating comfort. ..................................................................500/45-20 single

SWING CAPACITIES

Swing motor..................................................axial piston type Engine ............................................................................litres

Swing brake ............................................automatic disk type Lube oil ..............................................................................8.5
Reduction unit ..........................................oil bath epicyclical Coolant ............................................................................18.5
Swing ring............................................................grease bath Fuel ..................................................................................147
Swing speed..................................................................9 rpm Hydraulic system ..............................................................120
Swing reduction ....................................................................3
Axles (total) ........................................................................19
TRIPLE ARTICULATION DIMENSIONS (mm)

1900 2749 1490

3873
2950

615
1000
320

3460 2200 1045

6705
2200

7250
6932
60°
30°
°
60
1095

2200
2617
910

OPERATING WEIGHT (kg)

Rear blade Rear stabilisers Rear stabilisers and front blade
9040 8890 9390
(machine with 1850 mm dipper stick, 600 mm bucket, twinned wheels,
full fuel tank, operator) 9

7
DIGGING PERFORMANCE
6
Backhoe Clamshell (**)
5
Digging boom mm 1850 2200 1850 2200 4
Maximum reach mm 7840 8190 7450 7800
A) Reach at ground level mm 7650 8000 - - 3
C D
B) Digging depth mm 3750 4100 4650 5000 2
Vertical digging depth mm 3585 3950 - -
C) Digging front height mm 7895 8225 - - 1
D) Dump height mm 6030 6355 4895 5125 0
Front swing radius(*) mm 3240 3465 - -
Breakout force: -1
A
Bucket daN 5400 5400 - - -2 B
Dipper stick daN 4400 3900 - -
(*) With boom straight. -3
(**) Performance depends on clamshell bucket selection to be made
-4
according to lift capacity.
-5
9 8 7 6 5 4 3 2 1 0
MONOBOOM DIMENSIONS (mm)

1900 3454 1490

3783
2950

1000

615
320

3535 2200 1045

2200 6780

6427
6109
60°
30°
°
60
1095

2200
2617
910

OPERATING WEIGHT (kg)

Rear blade Rear stabilisers Rear stabilisers and front blade
8860 8710 9210
(machine with 1850 mm dipper stick, 600 mm bucket, twinned wheels,
full fuel tank, operator) 9
8

7
DIGGING PERFORMANCE
6
Backhoe Clamshell (**)
5
Digging boom mm 1850 2200 1850 2200 4
Maximum reach mm 7040 7385 6770 7100
A) Reach at ground level mm 6815 7160 - - 3 C
B) Digging depth mm 3635 3985 4570 4920 2 D
Vertical digging depth mm 3280 3670 - -
C) Digging front height mm 6110 6305 3400 3595 1
D) Dump height mm 4340 4540 - - 0
Front swing radius(*) mm 3090 3115 - - A
-1
Breakout force:
Bucket daN 5400 5400 - - -2 B
Dipper stick daN 4400 3900 - -
(*) With boom straight. -3
(**) Performance depends on clamshell bucket selection to be made -4
according to lift capacity.
-5
9 8 7 6 5 4 3 2 1 0
SIDE DIGGING DIMENSIONS (mm)

1900 3446 1490

3785
2950

2200 1000
320

610
3395 2200 1045
6640

5600
60°
30°
°
60
804

°
55
1900

2200
2617
1450

OPERATING WEIGHT (kg)

Rear blade Rear stabilisers Rear stabilisers and front blade
9110 8960 9460
(machine with 1850 mm dipper stick, 600 mm bucket, twinned wheels,
full fuel tank, operator) 9

7
DIGGING PERFORMANCE
6
Backhoe
5
Digging boom mm 1850 2200 4
Maximum reach mm 6875 7215
A) Reach at ground level mm 6650 6990 3 C
B) Digging depth mm 3625 3975 2
D
Vertical digging depth mm 3190 3580
1
C) Digging front height mm 5600 5760
D) Dump height mm 3980 3780 0
Front swing radius(*) mm 3070 3070 A
-1
Breakout force:
Bucket daN 5400 5400 -2 B
Dipper stick daN 4400 3900
-3
(*) With boom straight.
-4

-5
9 8 7 6 5 4 3 2 1 0
LIFTING CAPACITIES
With blade or two stabilizers on ground
(Kg x 1000)

Reach
1,5 m 3,0 m 4,5 m 6,0 m Max reach

Front Side Front Side Front Side Front Side Front Side

1850 mm Dipper stick

Height
Triple art./Offset boom *2.36 1.53 *2.36 1.43
+6.0 m
One piece boom
Triple art./Offset boom *2.21 1.55 *1.89 0.97 *1.89 0.95
+4.5 m
One piece boom *1.98 1.55 *2.02 1.50
Triple art./Offset boom *2.56 1.46 *1.90 0.96 *1.70 0.79
+3.0 m
One piece boom *1.90 1.64 *1.76 1.14
Triple art./Offset boom *3.42 2.72 *2.92 1.34 *1.97 0.91 *1.55 0.75
+1.5 m
One piece boom *2.09 1.36 *1.80 1.05
Triple art./Offset boom *4.53 2.30 *2.77 1.28 *1.82 0.89 *1.37 0.78
0
One piece boom *2.29 1.26 *2.56 1.23 *2.12 1.11
Triple art./Offset boom *2.56 2.31 *2.02 1.29 *1.02 0.91
-1.5 m
One piece boom *3.41 1.79 *2.36 1.46
Triple art./Offset boom *3.20 2.39 *1.92 1.49
-2.5 m
One piece boom
Triple art./Offset boom
-3.0 m
One piece boom

2000 mm Dipper stick

Height
Triple art./Offset boom *2.10 1.57 *2.03 1.21
+6.0 m
One piece boom
Triple art./Offset boom *2.04 1.58 *1.77 0.99 *1.64 0.86
+4.5 m
One piece boom *1.71 1.60 *1.64 1.35
Triple art./Offset boom *2.41 1.49 *1.83 0.96 *1.53 0.73
+3.0 m
One piece boom *1.64 *1.64 *1.46 1.06
Triple art./Offset boom *2.52 2.52 *2.85 1.35 *1.94 0.91 *1.45 0.69
+1.5 m
One piece boom *1.84 1.37 *1.69 0.99 *1.49 0.98
Triple art./Offset boom *4.49 2.29 *2.85 1.27 *1.88 0.87 *1.30 0.71
0
One piece boom *2.00 1.25 *2.33 1.16 *1.72 1.03
Triple art./Offset boom *3.24 2.27 *2.24 1.26 *1.38 0.88 *1.02 0.82
-1.5 m
One piece boom *3.20 1.56 *2.69 1.43 *2.23 1.30
Triple art./Offset boom *2.87 2.34 *1.42 1.30 *1.16 0.76
-2.5 m
One piece boom *3.10 2.62 *2.12 1.91
Triple art./Offset boom *2.88 2.39 *1.81 1.58
-3.0 m
One piece boom

Values are according with ISO 10567, with excavator without bucket, equipped with bucket cylinder, and bucket linkage.
Lifting capacities does not exceed 75% of tipping load or 87% of full hydraulic capacity.
Data marked with an asterisk (*) are limited by hydraulic capacity.
STANDARD EQUIPMENT
Standard equipment may change according to the country. Consult the Fiat-Hitachi Dealer.
ENGINE • Emergency lights
Alternator 55 A • Piloting system off
Anti-freeze • Level checks
Engine preheating • Automatic idling
Dry air filter with safety cartridge • Buzzer off
Maintenance-free batteries • Operating lights
ELECTRICAL SYSTEM • E Economy mode on
24 Volt • Parking, operating brake and axle locking selector
Horn • Speed selector (1st and 2nd mechanical)
Working lights • Steering mode selector
Road circulation lights • Rpm control selector
HYDRAULIC SYSTEM • Cab heating selector
Load Sensing • Air conditioning selector (optional)
Hydraulic hoses and connections with seals • Engine starter selector
Hydraulic cylinders with hydraulic travel end • Windshield wiper lever
Antidrop valves for positioner, slewing, blade, and • Lights and direction indicator control lever
axle locking cylinders • Hydraulic speed control lever
CAB • Steering column tilt lever
Cab with heating, heat protection glasses, • Servo control cut out safety lever
windshield wiper, washer, rear sun shield • Swing locking lever
Damped seat with independent adjustment control FRONT IMPLEMENT
Safety belts One piece boom
Tiltable steering column Triple articulation
Radio Offset boom
Travel foot control 1850 mm dipper stick
ON BOARD MONITOR Predisposition for hydraulic demolition hammer system
Indicators: Predisposition for branch cutter system
• Engine coolant temperature Clamshell bucket hydraulic system
• Fuel level Clamshell bucket rotation hydraulic cylinder
• Tachometer 600 mm bucket
• Brake pressure gauge UNDERCARRIAGE
• Hourmeter Grease bath circle
Warning lights Rear stabiliser blade
• Engine oil lever Tool hit holder
• Coolant level 2 steering axles
• Hydraulic oil level Front axle locking
• Battery charge Twinned 8.25 - 20 tyres with spacer ring
• Engine oil low pressure MISCELLANEOUS
• Air filter clogging 1650 Kg counterweight
• Engine overheating Internal and external sound deadening
• Low fuel level Standardised lock doors
• Operating lights
• Position lights
• Steering mode
• Rear wheel alignment
• Engine preheating OPTIONAL ACCESSORIES
• Automatic idling on
• E Economy mode on Air conditioning
• Level checks 280 to 800 mm backhoe buckets
• Axle lock 2200 mm dipper stick
• Parking bake FOPS, FGPS
• Operating brake Digging and lift cylinder anti-drop valves
• Brake pressure Hydraulic hammer system
• Emergency lights Branch cutter system
• Direction indicators Rear stabilisers
• Piloting system off Rear stabilisers and front blade
• Rotating light Front and rear stabilisers
• 1st gear Single 500/45-20 tyres
• 2nd gear Fuel pump
• TB / EX Stabiliser rubber shoes
Switches: Clamshell bucket support
• Horn Rain protection canopy

BACKHOES
SAE capacity Width Weight with teeth
m3 mm kg
0,050 280 78
0,075 350 85
0,145 450 128
0,181 600 137
0,217 700 147
0,290 800 163
Bucket selection depends on machine equipment and operating conditions.
 At your dealership

The information contained in this catalog is supplied for information only. The manufacturer may introduce changes to the models described
herein at any time for technical or commercial reasons. The illustrations of this document do not necessary show the product in the standard
version. For further information Customers are kindly required to refer to the closest Dealership.

Published by Fiat-Hitachi Excavators S.p.a. - http://www.fiat-hitachi.com - Number 79076/INB - Printed in Italy - 03/2000 - Siaca Arti Grafiche.