Scribd
Upload
15 views

Machine Design-I Lec 06

Uploaded by

zakokox1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Machine Design-I Lec 06

Uploaded by

zakokox1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Machine Design I

Cr Hrs: 3-0
Dr Syed Maaz Hasan
PG Coord
Mechanical Engineering Department
SMME, NUST
Keys and Couplings

Example 01
Machine Design I
Design and draw a protective type of cast iron flange coupling for a steel shaft transmitting 15 kW at
200 r.p.m. and having an allowable shear stress of 40 MPa. The working stress in the bolts should
not exceed 30 MPa. Assume that the same material is used for shaft and key and that the crushing
stress is twice the value of its shear stress. The maximum torque is 25% greater than the full load
torque. The shear stress for cast iron is 14 MPa.

2
Keys and Couplings

Machine Design I

3
Keys and Couplings

Example 01
Machine Design I
Design and draw a protective type of cast iron flange coupling for a steel shaft transmitting 15 kW at
200 r.p.m. and having an allowable shear stress of 40 MPa. The working stress in the bolts should
not exceed 30 MPa. Assume that the same material is used for shaft and key and that the crushing
stress is twice the value of its shear stress. The maximum torque is 25% greater than the full load
torque. The shear stress for cast iron is 14 MPa.

4
Keys and Couplings

Example 01
Machine Design I
Design and draw a protective type of cast iron flange coupling for a steel shaft transmitting 15 kW at
200 r.p.m. and having an allowable shear stress of 40 MPa. The working stress in the bolts should
not exceed 30 MPa. Assume that the same material is used for shaft and key and that the crushing
stress is twice the value of its shear stress. The maximum torque is 25% greater than the full load
torque. The shear stress for cast iron is 14 MPa.

? Other Dimensions?

? No of bolts? Other
Dimensions? D1?
5
Keys and Couplings

Machine Design I
Flexible Coupling

6
Keys and Couplings

Machine Design I
Flexible Coupling

7
Keys and Couplings

Machine Design I
Flexible Coupling

8
THANK YOU

You might also like