SAUDIARAMCO.

NOTES:

1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS

STATED OTHERWISE.

2. CABLE SHALL BE MEGGER TESTED AT 5000 V.

BETWEEN ARMOUR AND CONDUCTOR PRIOR TO
SHIPMENT.

3. ANODE DATA: : [MANUFACTURER - AFIC]

OF
BASE MATERIAL :TITANIUM GRADE 1.

COATING : MIXED METAL OXIDE OF GROUP

CONSENT
VIII ELEMENTS.
CRYSTALINE STRUCTURE 6-12gm/cm
ALL TITANIUM SURFACES OF VANES
HOUSING & PLUG IN CONTACT
2650 WITH SEAWATER ARE COATED.

TTEN
CURRENT DENSITY : 600 A/sq.m (MAX.)

820 COATING LOADING : 20g/sq.m

WRI
SURFACE AREA : 0.31 sq.m
IDENTIFICATION LABEL RATED OUTPUT CURRENT: 150A (MIN.).
SEE DETAIL-1

THE
MAX. VOLTAGE ALLOWED: NOLIMIT
NET WEIGHT OF PYRAMID ANODE : 450Kg Approx.
HMWPE OUTER SHEATH

THOUT
4. CABLE DRUM DATA (TYPICAL FOR 400M)

DIA. OF DRUM: 1375mm APPROX.

WITDH OF DRUM: 1000mm APPROX.
2 LAYERS GALVANIZED ROUND WIRE ARMOUR
400M ANODE CABLE DRUM

WI
5.SLING
POLYETHYLENE COVER WIDTH :4" INCH

A.

NG
BANDED IN PLACE LENGTH :6 METER

DI

DRAWI
CAPACITY :3200 KG (APPROX.)

+/_ 2%
PVC BEDDING 6. ANODE CABLE DATA:

50
29.
ARAMCO APPROVAL: 9COM-6000000957, CABLE,
1200

820

ELECTRICAL, OFFSHORE, CATHODIC PROTECTION

S
THI
7. LABELING SHALL BE WATER PROOF MATERIAL.
HMWPE INSULATION

8.TEMPORARY WOODEN PROTECTION ON THE TOP

FROM
OF CABLE DRUM SHALL BE PROVIDED.

CIRCULAR STRANDED COPPER 9.ANODE AND CABLE WEIGHT DETAILS AS FOLLOWS:

CONDUCTOR TO IEC-60228
TOLERANCE OF +/- 10% ON OVERALL
10.

NED
DIMENSION ONLY.

OBTAI
BATCH NUMBER TO BE PROVIDED AT THE TIME OF
11.
FAT.

A CABLE PULLING GRIP (CHINESE FINGER) SHALL BE

12.
2 DETAIL - CABLE SECTION

BE
SUPPLIED ALONG AS LOOSE ITEM.
SCALE NTS
CABLE LENGHT IS SUBLECT TO CHANGE
13.

PART,SHALL
ANODE ASSEMBLY STRAPPED AFTER FINALIZED DESIGN.
TO PALLET
FOR PYRAMID ANODE TAG NUMBERS REFER DWG#
13.
2000-64340AC-P013-001, SHEET.002

ANODE ASSEMBLY SHOWN WITHOUT PACKING FOR CLARITY

SPECIFICATION

17-SAMSS-017-25 JANUVARY 2017

N
CABLE

I
ANODE 17-SAMSS-007-25 JANUVARY 2017

FULL,OR
N
I
00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

ON
INTERNAL DSND CHKD APPR
DATE DESCRIPTION

REPRODUCTI
REVISION BY BY BY

MPP REVISION CONTROL

NATIONAL PETROLIUM CONSTRUCTION COMPANY

REFERENCE DRAWINGS
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
1000 ONE LINE DIAGRAM ICCP RA-185087
150

SAUDIARAMCO.NO
ABUDULLA FOUAD IMPALLOY LTD. CO.
CABLE DRUM. CLIENT NAME:NATIONAL PETROLEUM CONSTRUCTION COMPANY PJSC

CLIENT P.O. NO.: 2000-2020/64340-AC LINE ITEM NO.: SEE TABLE-1

ANODE TYPE: PYRAMID ANODE SLED A (MIXED METAL OXIDE)

OF
DRUM CHOCKED IN PLACE

100
AND STRAPPED TO PALLET. ANODE DIMENTION: 500x50x3MM (VENE TYPE))

PROPERTY
DATE OF MANUFACTURING: T.B.A

BATCH NO: SEE NOTE 11 SR. NO:

1000

T.B.A
CABLE END TO BE PROTECTED 2
BY HEAT SHRIKABLE SLEEVE. CABLE TYPE (IF ANY): CU/HMWPE/PVC/DSWA/HMWPE. 70MM
(ACCESSIBLE CABLE TAIL MANUFACTURER (ANODE CASTING): T.B.A CABLE: T.B.A
1000mm LONG (NOMINAL)
TAG NO: (SEE TABLE-1) PLATFORM NO: SEE TABLE-1
COMPANY LABEL

SOLE
WOOD CHOCK.

THE
1 D E T A I L
SCALE NTS

ARE
LABELED IN WHITE-BLACK-WHITE
TRAFFOLYTE, FIXED WITH SS SCREWS 1•" #8

N
HEREI
TIMBER PLATE

1900 750

NED
TABLE : 1 SCALE: NONE

CONTAI
LINE ITEM NO. SR.NO PLATFORM NO. TAG NO. CABLE LENGTH QTY
REVISION VALIDATION
1 ANODE SLED-A 400M 1

2 ANODE SLED-B 400M 1 THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

14551.00 3 ANODE SLED-C 400M 1

ON
ZULF 410/419 12-18000-0008-001
4 ANODE SLED-D 400M 1

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
5 ANODE SLED-E 400M 1 (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

6 ANODE SLED-F 400M 1 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00 12/10/20 ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION DETAILS CAT

NG
ICCP PYRAMID ANODE SLED ZULF 410/419

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
SUBMARINE CABLE (ALL-AREA)
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X CA-569241 001 00
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-01

 SAUDIARAMCO.
NOTES:

1. FOR NOTES, REFER DWG CA-569241 SHEET 001.

OF
CONSENT
TTEN
500 X 50 X 3mm
TITANIUM VANE

WRI
(TYP OF 6)

THE
THOUT
WI
DAR (DEVICE AGAINST

NG
ROTATION) PYRAMID ANODE

DRAWI
LIFTING HOLE (THROUGH)
SLING

S
THI
50mm 2" LIFTING HOLE (EXIST)

FROM
STRAPPING

ICCP CABLE W/

NED
CABLE TIES

OBTAI
2
70mm CABLE FIBERGLASS GRATING
HMWPE/DSWA/HMWPE

BE
SEE DETAIL-2

PART,SHALL
457 457

SECTION THROUGH

N
I
CENTER LINE

FULL,OR
PYRAMID ANODE INTERNAL ASSEMBLY

N
I
00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

ON
INTERNAL DSND CHKD APPR
DATE DESCRIPTION

REPRODUCTI
REVISION BY BY BY

MPP REVISION CONTROL

NATIONAL PETROLIUM CONSTRUCTION COMPANY

REFERENCE DRAWINGS
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735

ONE LINE DIAGRAM ICCP RA-185087

SAUDIARAMCO.NO
500 X 50 X 3mm
TITANIUM VANE
(TYP OF 6)

OF
PROPERTY
SOLE
LIFTING HOLE (THROUGH)

THE
ARE N
HEREI
2

NED
70mm CABLE
SCALE: NONE
HMWPE/DSWA/HMWPE

CONTAI
SEE DETAIL-2

REVISION VALIDATION

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00 12/10/20 ISSUED FOR CONSTRUCTION

PYRAMID ANODE

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION DETAILS CAT

NG
ICCP PYRAMID ANODE SLED ZULF 410/419

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
SUBMARINE CABLE (ALL-AREA)
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X CA-569241 002 00
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-01

 SAUDIARAMCO.
NOTES:
1. FOR NOTES, REFER DWG CA-352518 SHEET 001.

FROM 480V, 3PH, 60Hz

POWER PANEL PP-001

OF
FOR CONTINUATION SEE DISTRIBUTION
ONE LINE DIAGRAM DWG CA-445987 SH 001

CONSENT
PC-0975

TTEN
(NOTE 3)

REC-003

WRI
LEGEND

THE
CB-017

THOUT
100AF TRANSFORMER
30AT

WI NG
A PYRAMID ANODE SLED

DRAWI
INPUT 480VAC OUTPUT/50VDC, 300A
R
IMPRESSED CURRENT RECTIFIER

S
CATHODIC PROTECTION

THI
OIL FILLED TAP ADJUSTABLE
TRANSFORMER/RECTIFIER THERMITE WELD

FROM
IC-1314

ET ET EI (DC RECTIFIER FUSE, NON-DISCONNECT

NED
4009 4009 4009 VOLTAGE)

OBTAI
PC-0977
CIRCUIT BREAKER

IT IT II (DC RECTIFIER
PC-0978 R 4010 4010 4010 CURRENT)
NEGATIVE OR BOND CABLE

BE
ANODE OR POSITIVE CABLE

PART,SHALL
0-75 V V
CONDUIT

0-400A A
PC-XXXX POWER CABLE

175A 175A
CC-0983 C-XXXX CONDUIT TAG NUMBER

N
I
FULL,OR
N
PC-0977

I
C-0984

PC-0981

PC-0982

ON
REPRODUCTI
PC-0978
C-0985

PC-0981

PC-0982
C-0988

C-0989

SAUDIARAMCO.NO
(NOTE 3)
(NOTE 3) ANODE
NEGATIVE JUNCTION
SPLITTER BOX BOX

JB-043 JB-008
00A

00A 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

BUS BAR BUS BAR BUS BAR
GND BAR 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

INTERNAL DSND CHKD APPR

OF
DATE DESCRIPTION
REVISION BY BY BY

MPP REVISION CONTROL

PROPERTY
NATIONAL PETROLIUM CONSTRUCTION COMPANY

REFERENCE DRAWINGS
DWG CONTROL FOR J.O. 12-18000-0008 CE-464735
ARMOR ARMOR
E1L DIAGRAM 480V POWER DISTRIBUTION CA-445987
INST BLOCK DIAGRAM

SOLE
CA-445721
PC-0979
C-0986

CABLE & CONDUIT SCHEDULE (POWER) CD-446034

CABLE & CONDUIT SCHEDULE (INST) CD-527677
NG/

NG/
PANEL SCHEDULE

THE
RC-446025
BEDDI

BEDDI
SUBMARINE CABLE
PC-0597

PC-0596

PC-0598

PC-0599

PC-0600
C-0620

C-0621
C-0618

C-0617

C-0619

ARE
WORKSCOPE
JACKET)

JACKET)
PC-0992

PC-0990

PC-0993
C-0991
1-70m m ,HMWPE/PVC

1-70m m ,HMWPE/PVC

N
HEREI
TO NEGATIVE
DSWA/HMWPE(

DSWA/HMWPE(
SPLITTER BOX
JB-012

NED
2

(RA-185087 SCALE: NTS

SH 001)

CONTAI
REVISION VALIDATION

THIS REVISION NO. 00A IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

JACKET REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

A A

ON
LEG 12-18000-0008-001

NFORMATI
COLUMN
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
"E" 2A "F" (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

150A (NOTE 6) 150A ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

DECK
PYRAMID ANODE REV.NO. DATE REVISION DESCRIPTION

I
SLED ASSEMBLIES 00A 08/24/21 RE-ISSUED FOR CONSTRUCTION
#413

#415

#417
FUTURE

SLOT #3

#5

#7
#9
#410
#411

#1
2

2
FUTURE

FUTURE

THE
(POSITIVE) JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
NOTE

NOTE

NOTE

SLOT

SLOT
SLOT

12-18000-0008
SLOT

CONSTRUCTION UNTIL CERTIFIED AND DATED

WELL

WELL

WELL
WELL
WELL

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
ONE LINE DIAGRAM (ICCP)

DRAWI
ALL INSTRUMENT AND
EQUIPMENT TAG NUMBERS
ZULF 410/419
ARE PRECEDED BY
WELL CASINGS/CONDUCTORS PLATFORM PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.
(NEGATIVE)

THI
5B 408 X RA-185087 002 00A
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
CABLE TRAY DETAIL GROUNDING DETAIL BILL OFMATERIAL BILL OFMATERIAL
NOTES:
SCHEDULE SCHEDULE DWG DWG
STOCKNUMBER STOCKNUMBER IU DESCRIPTION QTY
CODE CODE
FOR THIS SHEET FOR THIS SHEET 1. ALL MATERIALS AND FABRICATION ARE IN
PDM ACCORDANCE WITH COMPANY SPECIFICATIONS.
DETAIL QTY DETAIL QTY STUFFING CABLE GLAND: ZONE 1, GAS GROUP IIB, T3,
TRAY: CABLE; CHANNEL COVER; STRAIGHT; AL 4" WD X 12'
EX D/EX E, IP65 (MIN), NICKEL PLATED BRASS, NPT 12.00 XX XXXXXX-XX EA 2. ALL DIMENSIONS ARE IN MILLIMETERS.
2 2 G4 10 LG; FLAT VENTED.
XX XXXXXX-XX EA THREADED, C/W EARTH TAG, LOCK NUT, WASHERS,
UV PROTECTED PVC SHROUDS; SIZE: 1'' NPT. SCREW: MACH; SST 1/4"-20 X 1-1/4" LG RD;
18 6 G15 2 XX XXXXXX-XX EA
SLOTTED HEAD W/ HEX NUT; 2 EA FLATWASHERS 3. SHIM PLATE TO LEVEL & SEAL WELD ALL AROUND.
INSTRUMENT CABLE GLANDS: 3/4" NPT, SS 316, CERTIFIED & LOCKWASHERS; TYPE 316
G16 2

OF
FLAMEPROOF (TYPE "D") NEMA TYPE 4X, SUITABLE 3.00
02 XX XXXXXX-XX
FOR CLASS-1, ZONE-1, IIA & IIB, T3, C/W PVC SHROUD, SHEET:INSULATING;PHENOLIC RESINLAMINATE 3/32" 4. FURNISHED BY ICCP TRANSFORMER/ RECTIFIER
G22 2
LOCKNUT, EARTH TAG, IP WASHER & SERRATED WASHER. XX XXXXXX-XX (2.38MM)THK X 48"X 48",TAN,SEMI-GLOSS,FOR VENDOR UNDER P.O. NO.2000-2020/64340-AC

CONSENT
G26 4 CABLE GLAND: BARRIER TYPE, ZONE 1, GAS GROUP IIB, T3, ELECTRICALINSULATEDMATERIAL
A EX D/EX E, IP65 (MIN), DOUBLE COMPRESSION, NICKEL
TIE,CABLE:18"LG,X 1/4"WD,X 5.4"(MAX)DIA RANGE, 5. ALL EQUIPMENT TAG NUMBERS ARE PRECEEDED
PLATED BRASS, NPT THREADED, C/W BARRIER INNER/OUTER 3.00
XX XXXXXX-XX XX XXXXXX-XX SST 316,PPA COATED,UNAFFECTED BY UV,(100 EA/PK ) BY PLANT NUMBER. REFER ELECTRICAL
SEALING, EARTH TAG, LOCK NUT, WASHERS, UV PROTECTED
2950 BAND-IT AE114OR BAND-IT AE1148.
PVC SHROUDS; SIZE: 1'' NPT. NAMEPLATE SCHEDULE CD-527960.
LUG: TERM; 4/0 AWG (107.2MM2) X 9/16" 2-HOLE; BURNDY
132 WIRE:600V THHN/THWN 1/C 4AWG (21.15MM2)STRDNYLON XX XXXXXX-XX
B XX XXXXXX-XX YA28-2LN OR EQUIVALENT.
6. RECTIFIER INTERNAL WIRING OF HIGH CURRENT

TTEN
PVC INSULBUILDING GREEN
LUG: TERM RING; 18-14 AWG X NO.6 HOLE INSUL CRIMP; PATHS SHALL BE THROUGH DIRECT CONTACT OF
LUBRICANT:THREAD;ANTI-GALLINGLITHIUM BASE (1.75 XX XXXXXX-XX
XX XXXXXX-XX BURNDY YAE14N1 OR EQUIVALENT.
OZ/TU);CH STL2 WIRED PART TERMINAL SURFACES PER 17-SAMSS-004

WRI
SLEEVE: HEAT SHRINK; 13-31.5MM DIA X 1MT LG; RAYCHEM
TRANSFORMER/RECTIFIER (REC-001 & 002): FOR ICCP XX XXXXXX-XX SECTION 8.4.10.2b TO MINIMIZE OR ELIMINATE
MWTM-35/12-1000/172 OR EQUIVALENT.
SYSTEM; 22KVA; 480VAC-50VDC, 300A, WITH DRAIN BREATHER, CURRENT FLOW THROUGH FASTENING BOLTS.
XX XXXXXX-XX WITH TRANSDUCERS HOUSED WITHIN THE RECTIFIER LUG: TERM RING; 22-16 AWG X NO.6 HOLE CRIMP CU TIN
XX XXXXXX-XX

THE
ENCLOSURE FOR 4-20MA OUTPUT SIGNAL TO RTU. PLTD; RED; BURNDY YAE18N1 OR EQUIVALENT.
7. FOR ORIENTATION OF REC-001/REC-002 & REC-003
NAME PLATE LADDER CABLE TRAY: MATERIAL: COPPER-FREE ALUMINUM LUG: TERM RING; 6 AWG X 5/16" HOLE; CRIMP TYPE; BURNDY
XX XXXXXX-XX PLEASE REFER EQUIPMENT LAYOUT DGN NO.
(ALUMINUM WITH A MAXIMUM OF 0.4% COPPER), INDIVIDUAL YAEV6C-L4 OR EQUIVALENT.

THOUT
REC-001 XX XXXXXX-XX CA-445651-001 & POWER AND CONTROL CABLE
RUNG LOAD CAPACITY: MINIMUM 90KG, LOADING DEPTH: 6",
LUG: TERM RING; 8 AWG (10MM2) X 1/4" HOLE CRIMP;
WIDTH: 6", LENGTH: 12', FLANGE WIDTH: 13/16". XX XXXXXX-XX LAYOUT DGN. NO. CA-445994.
OR BURNDY YAEV8C-L1 OR EQUIVALENT.

REC-002 LADDER CABLE TRAY COVER: MATERIAL: COPPER-FREE 8. ALL TAGS SHALL BE PREFIXED BY 408-5B.

WI
24 XX XXXXXX-XX HUB: 3/4" DIA. ZINC PVC CTD WITH GROUND & GALVANIZED 6.00
ALUMINUM (ALUMINUM WITH MAXIMUM OF 0.4% COPPER).
OR XX XXXXXX-XX WIDTH: 6", THICKNESS: MININUM 1MM, LENGTH: 12', FLANGE STEEL PLUG FOR USE ON 25MM2 THHN/THWN CABLE.
TYPE: OUTSIDE, COVER TYPE: LOUVERED. (BY VENDOR)

NG
REC-003

DRAWI
CIRCUIT BREAKER PANEL HUB: 1" DIA. ZINC PVC CTD WITH GROUND & GALVANIZED
TRAY:CABLE;STRAIGHT CHANNEL;AL 4"WD X 12'LG;1 25 XX XXXXXX-XX 12.00
CATHODIC PROTECTION STEEL PLUG FOR USE ON 120MM2 HMWPE CABLE.
3/4"HIGH;VENTED;A/C 1124-04SL-12V,OR USE
RECTIFIER (BY VENDOR)
DC-014-810-02;OR(WESCOSA 2AGP-100-3.66,
(NOTE 4) XX XXXXXX-XX
DC-014-520-12);OR(WESCOSA 2AGP-100-3.0, ADAPTER/REDUCER: REGULAR TYPE , ZONE 1, GAS GROUP IIB,
26 XX XXXXXX-XX EX D/EX E, IP65 (MIN), NICKEL PLATED BRASS, C/W 3.00
DC-014-456-00;OR(WESCOSA AT2PB-100ST-3V,

S
THI
DC-014-456-03) ACCESSORIES , SIZE: 3/4'' MALE X 1" FEMALE NPT.

2" x 150 LG NIPPLE W/CAP

FROM
00B
OIL FILL TUBE
SEE DETAIL-4

DC A +

D CA+
S H LD

S H LD

S H LD

S P RE

S P RE

S P RE
D CA -

D CV -
FOR CABLE ENTRY

C OM

NC
NO

NED
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

OBTAI
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

MAIN DECK OIL CONTAINMENT 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

DCV (- )
DCV (+ )
DCA (- )
DCA (+ )

LD
1 2 3
CURB

SHEI
LD

LD
INTERNAL DSND CHKD APPR

COM

NC
NO

SHEI

SHEI
SPARE DATE DESCRIPTION
TERMINAL REVISION BY BY BY

OV.
G4 G16 G22

BE
L1 L2 L3 GND MPP REVISION CONTROL
ANODE
CA-527956 CA-527956 CA-527956 TS1 STRUCTURE RMS
DC(+)
W10x19 SH 001 SH 003 W10x19
SH 004 AC INPUT
DC(-) RTU CONNECTIONS
NATIONAL PETROLIUM CONSTRUCTION COMPANY

PART,SHALL
480 VAC 1 2 1 2

REFERENCE DRAWINGS
W27x84
STRUCTURE DC(-) LUGS DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
G15
CA-527956 ELECT. GENERAL NOTES LEGEND & ABBREVIATIONS CA-527971
ANODE DC(+) LUGS
SH 003 POWER & CONTROL CABLE LAYOUT CA-445994

PC-0008
1060 CATHODIC PROTECTION LAYOUT-MAIN DECK RA-185092-002
PC-0582 G4 3 D E T A I L CABLE & CONDUIT SCHEDULE (ELEC) CD-446034

N
1060

I
PC-0583
CA-527956 SCALE NTS CABLE & CONDUIT SCHEDULE (INST) CD-527677
PC-0584

FULL,OR
SH 001
ELECTRICAL DETAIL - CABLE TRAY INSTALLATION CA-527957
PC-0585

#4 AWG GROUNDING WIRE GROUNDING DETAIL-STANDARDIZED CA-527956

FOR CONT, SEE GROUNDING LAYOUT CA-445998

GROUNDING PLAN
DWG CA-445998 AC VOLTAGE
TEST POINTS

0
X
VOLTMETER

X X X
X
X 0
X
AMMETER

X X X
X
X

N
L1 L2 L3

I
DC VOLTS DC AMPERES

AC CIRCUIT
BREAKER
VOLTMETER AMMETER
30 AMP
AC VOLTAGE
TEST POINTS
X X

ON
X X X X
X X X X
0 X 0 X

L1 L2 L3

DC VOLTS DC AMPERES

REPRODUCTI
AC CIRCUIT 400A-50mV
SHUNT
BREAKER
TEST POINTS

ELECTRICAL TRAY 30 AMP

AC INPUT
480 VAC

BOT EL (+) 10854 20 18 3PH 60Hz

SPARE
RMS

SEE
1 D E T A I L
FUSE
400A-50mV
SHUNT

TO GND GRID
TEST POINTS

KEY PLAN
AC INPUT
480 VAC
DETAIL-3
RA-185088 3PH 60Hz

SCALE NTS 20 18 SPARE

RMS

G4
FUSE

SH 003 UT
(TYP) 19 M

DA+

D V+
00B

S HLD

S H LD
SH L D

D V-
DA -
IC-0212 (4 PLACES) GR
CA-527956 SH 004 ID

DCA (- )
DCA (+ )

DCV (- )
DCV (+ )
SHLD OVERALL

LD
SPARE

SPARE

LD
GND

22
L1 L2 L3

SHEI
SHEI
STRUCTURE ANODE
TS1

SH 001 AC INPUT
DC(-) DC(+)

(TYP) SEE 480 VAC

RTU CONNECTIONS
RMS

DA+

D V+
S HLD

S H LD
SH L D

D V-
DA -
29.25°

A CIN

A COT

D COT

SAUDIARAMCO.NO
L- L- L+ L+ DC OK

D COT
A C IN

A C OT

P S OT

P S OT

P S OT
DETAIL-3
OUTPUT 24 VDC 2.5A

00B 25 01

DCA (- )
CP-E 24/2.5

DCA (+ )

DCV (- )
DCV (+ )
SHLD OVERALL
POWER SUPPLY

LD
SPARE

SPARE

LD
GND

22
L1 L2 L3

SHEI
SHEI
STRUCTURE ANODE
TS1 Output ADJ

DC(-) DC(+)
DC ON
AC INPUT

480 VAC RMS

RTU CONNECTIONS

03
INPUT 50/60Hz

PLATFORM

AC OUT

DC OUT
AC OUT

DC OUT
AC 100-240V 0.25A
AUXILLIARY

N
00B

AC I
1 2 3

AC I
N L

GND TRANSFORMER SPARE

TERMINAL
480 VAC INPUT 480 110 24V

INSTRUMENT TRAY
AC AC DC
110 VAC OUTPUT

A CIN

A COT

D COT
19 NORTH
L- L- L+ L+ DC OK

D COT
A C IN

A C OT

P S OT

P S OT

P S OT
OUTPUT 24 VDC 2.5A

25 01 DC
CP-E 24/2.5
POWER SUPPLY

Output ADJ

ON

BOT EL (+) 10045 03

INPUT 50/60Hz

(FOR POWER CABLE) 21 24 26 REC-003

AC OUT

DC OUT
AC OUT

DC OUT
AC 100-240V 0.25A
AUXILLIARY

N
N

AC I
1 2 3

AC I
N L

GND TRANSFORMER SPARE

ND
NG WI
TERMINAL
480 VAC INPUT 480 110 24V

LI
AC AC DC
110 VAC OUTPUT

00B PREVAI
02 21 (FOR RTU SIGNAL)
(FOR POWER CABLE) 21 24 26

OIL CONTAINMENT 02 21 (FOR RTU SIGNAL) SEE DETAIL-4 24 B A

#4 AWG
CURB FOR CABLE ENTRY DECK PENETRATION REC-001
GROUNDING WIRE 24
SEE DETAIL-4
SEE STRUCTURAL DWG
FOR CABLE ENTRY DECK PENETRATION

OF
SEE STRUCTURAL DWG
MAIN DECK
18B 2

PROPERTY
MAIN DECK CA-527957
REC-001 18B SH 003

CA-527957
MAIN DECK
REC-002 SH 003
OR

REC-003 #4 AWG GROUNDING WIRE 4" INST TRAY

1

SOLE
FOR CONT SEE CHANNEL
CATHODIC PROTECTION
#4 AWG GROUNDING WIRE 4" INST TRAY GROUNDING PLAN
RECTIFIER
FOR CONT SEE CHANNEL DWG CA-445998 SH 002 09 10
(NOTE 4)
REC-002

THE
GROUNDING PLAN
04
DWG CA-445998 SH 002 09 10 (8 PLACES)
12 15
G22
04

ARE
CA-527956 (8 PLACES)
12 15
SH 004
SCALE

N
HEREI
PC-0013

PC-0586
08 07
0 0.1 0.2 0.3 0.4 0.5 1.0
PLAN PC-0008 PC-0587
08 07 2
PC-0582 PC-0588 METERS
CA-527957
A S E C T I O N PC-0583 PC-0589

NED
2 SH 001
SCALE: 1 : 10
PC-0584
SCALE NTS CA-527957

CONTAI
PC-0585
SH 001

HOLE SUITABLE FOR 375 REVISION VALIDATION

CONDUIT HUB SIZE 3/4"NPT ELECTRICAL TRAY

119 150 100 THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
(W/ 3/4"NPT (M) TO 1"NPT BOT EL (+) 10854 REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

(F) ADAPTER) FOR AC ELECTRICAL TRAY

ON
HOLES SUITABLE FOR CONDUIT
85

TO GND GRID 12-18000-0008-001

INPUT POWER SUPPLY BOT EL (+) 10854

NFORMATI
HUB SIZE 1" NPT FOR 1C X 120mm2 G4
150

DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER

UNARMORED (FOR NEGATIVE CABLE) TO GND GRID (4 PLACES) (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
CA-527956
DRAIN BREATHER G4 IC-0670
SH 001 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

(4 PLACES)
CA-527956
95

SH 001
IC-0669 REV.NO. DATE REVISION DESCRIPTION
600

I
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

HOLES SUITABLE FOR CONDUIT

THE
INSTRUMENT TRAY
100

JOB ORDER/EWO NO.

THIS REVISION IS NOT TO BE USED FOR
HUB SIZE 1" FOR 1C X 120mm2
BOT EL (+) 10045 12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED
UNARMORED (FOR POSITIVE CABLE)
INSTRUMENT TRAY
SAUDI ARABIAN OIL COMPANY

AND
BOT EL (+) 10045
95

REC-002 DRAWING TYPE

HOLE SUITABLE FOR CATHODIC PROTECTION CAT

NG
CONDUIT HUB SIZE 3/4" NPT FOR CABLE ENTRY DETAILS REC-001
75

B S E C T I O N ICCP RECTIFIERS REC-001, 002 AND 003

DRAWI
CABLE TO RTU
ALL EQUIP, INSTRUMENT
SCALE NTS ZULF 410/419
85

B S E C T I O N AND PIPING TAG

4 D E T A I L NUMBERS ARE PRECEDED

SCALE NTS
BY PREFIX NO. ZULUF SAUDI ARABIA
SCALE NTS

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185088 001 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:
1. FOR NOTES, REFER DWG RA-185088 SHEET 001.

2. FOR BOM QUANTITY, REFER DWG RA-185088

SHEET 001.

OF
CONSENT
TTEN
WRI
THE
1060

THOUT
WI NG
DRAWI
VOLTMETER AMMETER
AC VOLTAGE
TEST POINTS
X X X X X X
X X X X
0 X 0 X

L1 L2 L3

DC VOLTS DC AMPERES

AC CIRCUIT
BREAKER
30 AMP

S
THI
400A-50mV
SHUNT

TEST POINTS

SEE
20 18 AC INPUT
480 VAC
3PH 60Hz
RMS
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
SPARE

FUSE
DETAIL-3

FROM
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

19 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

(TYP)

DA+

D V+
00B

S HLD

S H LD
SHL D

D V-
DA -
INTERNAL DSND CHKD APPR
DATE DESCRIPTION
REVISION BY BY BY

NED
DCA (- )
DCA (+ )

DCV (- )
DCV (+ )
SHLD OVERALL

LD
SPARE

SPARE

LD
L1 L2 L3 GND

SHEI
22

SHEI
STRUCTURE ANODE
TS1
DC(-) DC(+)
AC INPUT

480 VAC RMS

RTU CONNECTIONS

MPP REVISION CONTROL

A CIN

A COT

D COT

OBTAI
L- L- L+ L+ DC OK

D COT
A C IN

A C OT

P S OT

P S OT

P S OT
OUTPUT 24 VDC 2.5A

25 01
CP-E 24/2.5
POWER SUPPLY

NATIONAL PETROLIUM CONSTRUCTION COMPANY

Output ADJ

DC ON

03
INPUT 50/60Hz

AC OUT

DC OUT
AC OUT

DC OUT
AC 100-240V 0.25A
AUXILLIARY

N
N

AC I
1 2 3

AC I
N L

GND TRANSFORMER
480 VAC INPUT
110 VAC OUTPUT
480
AC
110
AC
24V
DC
TERMINAL
SPARE

00B

REFERENCE DRAWINGS
(FOR POWER CABLE) 21 24 26
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735

BE
02 21 (FOR RTU SIGNAL)
ELECT. GENERAL NOTES LEGEND & ABBREVIATIONS CA-527971
24

PART,SHALL
SEE DETAIL-4 POWER & CONTROL CABLE LAYOUT CA-445994

FOR CABLE ENTRY DECK PENETRATION CATHODIC PROTECTION LAYOUT-MAIN DECK RA-185092-002

SEE STRUCTURAL DWG CABLE & CONDUIT SCHEDULE (ELEC) CD-446034

CABLE & CONDUIT SCHEDULE (INST) CD-527677
ELECTRICAL DETAIL - CABLE TRAY INSTALLATION CA-527957
MAIN DECK
18B GROUNDING DETAIL-STANDARDIZED CA-527956

CA-527957 GROUNDING LAYOUT CA-445998

N
I
SH 003

FULL,OR
#4 AWG GROUNDING WIRE 4" INST TRAY
FOR CONT SEE CHANNEL
GROUNDING PLAN

N
DWG CA-445998 SH 002 09 10

I ON
04
(8 PLACES)
12 15

REPRODUCTI
KEY PLAN

PC-0975
UT
M
PC-0977
08 07 GR
ID
PC-0978
2 29.25°
PC-0981

SAUDIARAMCO.NO
CA-527957
PC-0982 PLATFORM
SH 001
NORTH
(HOLD)
LI ND
NG WI
PREVAI REC-003
ELECTRICAL TRAY

BOT EL (+) 10504

B A
TO GND GRID
REC-001
G4
(4 PLACES)
CA-527956

OF
SH 001
IC-0670

PROPERTY
2

INSTRUMENT TRAY
MAIN DECK
BOT EL (+) 10023

SOLE
REC-003

B S E C T I O N

THE
REC-002
SCALE NTS

ARE
SCALE

N
HEREI
0 0.1 0.2 0.3 0.4 0.5 1.0

METERS

NED
SCALE: 1 : 10

CONTAI
REVISION VALIDATION

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
ICCP RECTIFIERS REC-001, 002 AND 003

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185088 002 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BI
LL O F M ATERI
AL
NOTES:
DW G STO CK
B I
U DESCRI
PTI
ON Q TY
CO DE NUM BER
1. ALL MATERIALS AND FABRICATION SHALL BE IN
PDM
ACCORDANCE WITH COMPANY SPECIFICATIONS.
18 12 407 585-
00 Mtr ANG LE:CS 50M M X 50M M X 6M M THK G RADE S235JR (
ST 37-
2)EN 10025 7.0
O R ASTM A36M /
A6M (
4.47 KG/M T)(
6MT
/PC) 2. ALL DIMENSIONS ARE IN MILLIMETERS.

3. SHIM PLATE TO LEVEL & SEAL WELD ALL AROUND.

OF
4. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER

CONSENT
TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.

5. ALL TAGS SHALL BE PREFIXED BY 408-5B.

REC-001
REC-001

TTEN
CATHODIC PROTECTION
RECTIFIER

WRI
THE
THOUT
DECK PENETRATION
SEE STRUCTURAL DWG 71

WI NG
MAIN DECK MAIN DECK MAIN DECK

DRAWI
140

140
TOS EL (+) 12000

W10x19 W10x19
299

S
THI
(TYP) W10x19
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

637 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

FROM
617

617
INTERNAL DSND CHKD APPR
468 DATE DESCRIPTION
REVISION BY BY BY
W27x84 MPP REVISION CONTROL

NED
532 275
NATIONAL PETROLIUM CONSTRUCTION COMPANY

OBTAI
312
REFERENCE DRAWINGS
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735

ELEC. GEN NOTES, LEGEND & ABBREVIATION CA-527971

BE
900

900
POWER & CONTROL CABLE LAYOUT CA-445994
209
CATHODIC PROTECTION BLOCK DIAGRAM RA-185095

PART,SHALL
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034

REC-001
303

303
295
240 SIDE ELEVATION
428

N
B S E C T I O N

I
FULL,OR
SCALE NTS
677
295

414

N
I
REC-001 A

ON
REPRODUCTI
ELEVATION
KEY PLAN
(LOOKING AT RECTIFIER PANEL ENTRY END)
UT
M
1 D E T A I L GR
ID
RA-185088
SCALE NTS
SH 001
29.25°

PLATFORM

SAUDIARAMCO.NO
NORTH
(HOLD)
LI ND
NG WI
REC-002 PREVAI REC-003
REC-002

CATHODIC PROTECTION
RECTIFIER B A
REC-001

OF
DECK PENETRATION
2

PROPERTY
SEE STRUCTURAL DWG

MAIN DECK

1
MAIN DECK MAIN DECK

SOLE
154

TOS EL (+) 12000

119 W10x19 W10x19 REC-002

THE
W10x19

401

ARE
(TYP)
547

771 SCALE

N
509

HEREI
0 0.1 0.2 0.3 0.4 0.5 1.0

METERS
139

209

NED
SCALE: 1 : 10

CONTAI
REVISION VALIDATION

612 THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

REC-002

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
SIDE ELEVATION
895

895

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
A S E C T I O N 00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
SCALE NTS JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

209
SAUDI ARABIAN OIL COMPANY

AND
612
REC-002 DRAWING TYPE

CATHODIC PROTECTION CAT

NG
ELEVATION ICCP RECTIFIERS REC-001, 002 AND 003

DRAWI
299

299

(LOOKING AT RECTIFIER PANEL ENTRY END)

ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
438 NUMBERS ARE PRECEDED

2 D E T A I L BY PREFIX NO. ZULUF SAUDI ARABIA

S
RA-185088 PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
SCALE NTS
SH 001
5B 408 X RA-185088 003 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BI
LL O F M ATERI
AL
NOTES:
DW G STO CK
I
U DESCRI
PTI
ON Q TY
CO DE NUM BER 1. FOR NOTES, REFER DWG RA-185088 SHEET 003.

PDM

18 12 407 585-
00 Mtr ANG LE:CS 50M M X 50M M X 6M M THK G RADE S235JR (
ST 37-
2)EN 10025 2.2
O R ASTM A36M /
A6M (
4.47 KG/M T)(
6 M T/PC)

OF
CONSENT
TTEN
WRI
THE
THOUT
C

WI NG
DRAWI
S
THI
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

FROM
INTERNAL DSND CHKD APPR
DATE DESCRIPTION
REVISION BY BY BY

MPP REVISION CONTROL

NED
REC-003
NATIONAL PETROLIUM CONSTRUCTION COMPANY
REC-003

OBTAI
CATHODIC PROTECTION REFERENCE DRAWINGS
RECTIFIER DWG. CONTROL FOR J.O.12-18000-0008 CE-464735

ELEC. GEN NOTES, LEGEND & ABBREVIATION CA-527971

BE
POWER & CONTROL CABLE LAYOUT CA-445994

CATHODIC PROTECTION BLOCK DIAGRAM RA-185095

PART,SHALL
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034
DECK PENETRATION
SEE STRUCTURAL DWG 236
310 236

N
I
MAIN DECK MAIN DECK

FULL,OR
TOS EL (+) 12000
100

N
I ON
REPRODUCTI
173
KEY PLAN

UT
597

M
GR
ID

29.25°

PLATFORM

SAUDIARAMCO.NO
NORTH

LI ND
NG WI (HOLD)
PREVAI
REC-003

173 B A
370 297
REC-001

667

OF
PROPERTY
2
REC-003
REC-003
MAIN DECK

ELEVATION SIDE ELEVATION

(LOOKING AT RECTIFIER PANEL ENTRY END) 1

SOLE
3 C S E C T I O N
D E T A I L
RA-185088 SCALE NTS

THE
SCALE NTS REC-002
SH 002

ARE
SCALE

N
HEREI
0 0.1 0.2 0.3 0.4 0.5 1.0

METERS

NED
SCALE: 1 : 10

CONTAI
REVISION VALIDATION

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
ICCP RECTIFIERS REC-001, 002 AND 003

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185088 004 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
GROUNDING DETAIL BILL OF MATERIAL
NOTES:
SCHEDULE DW G STO CK
FOR THIS SHEET I
U DESCRI
PTI
ON Q TY
Y 1. ALL MATERIALS AND FABRICATION SHALL BE IN
CO DE NUM BER
4 4A 4B ACCORDANCE WITH COMPANY SPECIFICATIONS.
2 DETAIL QTY 01 XX XXX XXX-XX FT CHANNEL:CS C4 X 5.
4#/FT A36 (
35 - 40 FT LG ) 12.
50
RA-185089 RA-185089 RA-185089
2. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER
SH 002 SH 002 SH 002 G3 4 02 XX XXX XXX-XX SM PLATE:CS 10M M THK X 2500M M X 6000M M A36M (
164.
63 #/SM ) 0.
08
TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
03 XX XXX XXX-XX FT CHANNEL:CS C6 X 10.
5#/FT A36 11.
70
G4 1
BUSHING :CND; 3/4"INSUL G ND 14 - 4 AW G PVC CTD ;APP G I
B-75L-4- 3. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
09 XX XXX XXX-XX EA PVC/ O Z G EDNEY I
BC-75L-4AO -PVC;O ZG NO .IBC-75L-4AC 6.
00

OF
OR EQUIVALENT. 4. SHIM PLATE TO LEVEL AND SEAL WELD ALL

BUSHING END: CND; 1" INSUL PVC CTD; APP BU-100I-PVC AROUND.
10 XX XXX XXX-XX EA 12.
00

CONSENT
OR EQUIVALENT. 5. ALL CONDUIT CONNECTIONS ARE SHALL BE COATED
BO LT:U;SST 3/4"NO M PI
PE SI
ZE 1/4"-20 THD X 1-3/8"CEN TER O F PI
PE 6.
00 WITH PVC PATCHING COMPOUND.
B 11 XX XXX XXX-XX EA TO END O F BO LT W /2 HEX NUT;W /2 EA RO UND W ASH ERS;2 EA
TAG NO. 408-5C-JB-009

CATHODIC PROTECTION
TAG NO. 408-5C-JB-010

CATHODIC PROTECTION
TAG NO. 408-5C-JB-010

CATHODIC PROTECTION
28 (3 PLACES)
OFFSHORE POSITIVE TERMINAL
JUNCTION BOX
OFFSHORE POSITIVE TERMINAL
JUNCTION BOX
OFFSHORE POSITIVE TERMINAL
JUNCTION BOX
LO CKW ASHERS AI
SI316L 6. GLANDING AND TERMINATING ANODE CABLES TO

XX XXX XXX-XX FT GROUNDING WIRE: 450/750V I/C 4 AWG (25 MM2) STRD CU PVC JUNCTION BOX IS UNDER SUBMARINE CABLE SCOPE.
12 6.
00
ANODE JUNCTION BOX ANODE JUNCTION BOX ANODE JUNCTION BOX
INSULATED BUILDING GREEN

TTEN
JB-009 JB-010 JB-008 7. ALL TAGS SHALL BE PREFIXED BY 408-5B.
BOLT:U;SST 1"NOM PIPE SIZE (1.315"OD)3/8"DIA ROD; 12.
00
ABDULLA FOUAD - IMPALLOY LTD. CO.

P.O.BOX 257, DAMMAM 31411,

KINGDOM OF SAUDI ARABIA.
ABDULLA FOUAD - IMPALLOY LTD. CO.

P.O.BOX 257, DAMMAM 31411,

KINGDOM OF SAUDI ARABIA.
ABDULLA FOUAD - IMPALLOY LTD. CO.

P.O.BOX 257, DAMMAM 31411,

KINGDOM OF SAUDI ARABIA. 16 THD/INCH;50MM CENTER OF PIPE TO END OF BOLT;A193 8. BUSHING SHALL BE INSTALLED ON BOTH ENDS OF

WRI
TEL : + 966 (13) 8473300
FAX : + 966 (13) 8472233
TEL : + 966 (13) 8473300
FAX : + 966 (13) 8472233
TEL : + 966 (13) 8473300
FAX : + 966 (13) 8472233 13 XX XXX XXX-XX EA GR B8M AISI316L W/6 HEX NUT A194GR 8M AISI316 AND 4
1919 THE CONDUIT.
FLATWASHER A194GR 8M AISI316
176 364 237 364 237 364 177 14 XX XXX XXX-XX EA CLAM P:CABLE;316 SST;P-TYPE;1-HO LE;W /BO LT A193 B8M ;NUT,2 EA 10.00

THE
FLATW ASHERS,1EA LO CKW ASHER;A194 8M ;0.
38"I
D (
3/8")
15 XX XXX XXX-XX PC ANG LE:CS 50M M X 50M M X 6M M THK G RADE S235JR (
ST 37-2)EN 10025 0.
40

THOUT
PC-0627 PC-0629
O R ASTM A36M /A6M (
4.47 KG /M T)(
6 M T/PC)
19 XX XXX XXX-XX CN CO M PO UND:PATCHI
NG ;FO R PVC CO ATED CO NDUI
T 16 O Z (
0.5 LT/CN) 0.
50
PC-0628 PC-0630
01 12mmø HOLE (
SL12AC)

554

WI
(4 PLACES)
C-0605 C-0631
20 XX XXX XXX-XX TU LUBRI
CANT:THREAD;ANTI
-G ALLI
NG LI
THI
UM BASE (
1.75 O Z/TU)
;CH 0.
50
ANODE JUNCTION BOX ANODE JUNCTION BOX ANODE JUNCTION BOX
STL2
JB-009 JB-010 JB-008

NG
00A
C-0606 C-0632 22 XX XXX XXX-XX FT ANG LE:CS,3-1/2"X 3-1/2"X 1/4"THK A36 (
35 - 40 FT LG ) (
5.8#/FT) 3.
70

DRAWI
TYP
C-0603 C-0602 5 CLAM P:CABLE;316 SST;P-TYPE;1-HO LE;W /BO LT A193 B8M ;NUT,2 EA 12.00 REVISION CLOUD OMITTED
23 XX XXX XXX-XX EA
FLATW ASHERS,1EA LO CKW ASHER;A194 8M ;35 MM FOR CLARITY.

13
**

S
THI
BO X:CATHO DI
C PRO TEC PO SI
TIVE;ENCL TYPE;N EM A 4X ;SS316L;
PC-0992 XX XXX XXX-XX EA 514MMx514MMx150MM; W /BUS BARS,G ND BUS, TWO HO LE CABLE
28 3.
00
(12 PLACES) 11
PC-0993 CO NN.W /NUTS,BO LTS & W ASHER;W / I
NTEG RAL DR AI
N & BREATHER
(6 PLACES)

FROM
12mmø

630
C-0988

1772
01 (4 PLACES)
30 XX XXX XXX-XX EA CONDUIT: RGS, PVC COATED 1"W/1 COUPLING AT ONE END;
DECK PENETRATION C-0989 03 2.00
RIGID STELL, HOT DIP GALV (10FT/PC).
SEE STRUCTURAL DWG 22 00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

NED
31 XX XXX XXX-XX EA CONDUIT: RGS, PVC COATED 3/4"W/1 COUPLING AT ONE END;
3.00 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
C-0991 TYP RIGID STELL, HOT DIP GALV (10FT/PC).

OBTAI
5 03 INTERNAL DSND CHKD APPR
MAIN DECK DATE DESCRIPTION
1. I
TEM 28 I
S SUPPLI
ED BY I
CCP VENDO R. REVISION BY BY BY

** CONDUIT SUPPORT HOLES SHALL MPP REVISION CONTROL

BE DRILLED TO SUIT AT SITE.

** NATIONAL PETROLIUM CONSTRUCTION COMPANY

BE
23
REFERENCE DRAWINGS

PART,SHALL
(12 PLACES) DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
**

588
ELECT. GENERAL NOTES LEGEND & ABBREVIATIONS CA-352530
02 02 CATHODIC PROTECTION LAYOUT-MAIN DECK RA-185092-002
(TYP)
(6 PLACES) 09
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034
(NOTE 8) 12
GROUNDING DETAIL-STANDARDIZED CA-527956
14
(12 PLACES) 10
(NOTE 8) (4 PLACES)

N
MAIN DECK

I
FULL,OR
153
1-#4 AWG GROUND WIRE

400
SEE GROUNDING PLAN 15 02

15
TO ANODE 01
1-#4 AWG GROUND WIRE
SLEDS SEE GROUNDING PLAN **

N
I
'A' & 'B'
1925

ON
TO ANODE G4

REPRODUCTI
SLEDS 'C' & 'D'
CA-527956
SH 001 (3 PLACES) KEY PLAN
ANODE
JUNCTION U
T
G M
BOX R
TO ANODE I
D
SLEDS JB-008
30°
'E' & 'F'
JB-009 PLATFORM

SAUDIARAMCO.NO
G3 NORTH
CA-527956 ELEVATION JB-010
SH 001 PREVAILING WIND
(LOOKING EAST)

ELEC CABLE TRAY ANODE JUNCTION BOX SUPPORT STAND (ABOVE DECK) & 01 B A
BOT EL (+) 10262
CABLE & CONDUIT SUPPORT (BELOW DECK) 03

PC-0582 PC-0588 PC-0981

TYP

OF
FROM REC-001 FROM FROM 5
REC-002 REC-003 2 D E T A I L

PROPERTY
2
PC-0590 PC-0601 SCALE NTS
PC-0990
22
TO LEG 1B TO LEG 1A TO LEG 2A
MAIN DECK

PC-0583 PC-0589 PC-0982

FROM REC-001 FROM REC-002 FROM REC-003 1

SOLE
ELEVATION A
A

THE
(LOOKING EAST) JB-008
DECK 02 ANODE
PENETRATION JUNCTION JB-009

ARE
606 (TYP) BOX
JB-010
ANODE JUNCTION BOXES JB-008, JB-009 & JB-010 6

N
HEREI
1 SCALE

1 D E T A I L
RA-185092
SCALE NTS
SH 002

NED
153 1617
SCALE: N.T.S
NOTE 4

485
03 100
(TYP) 02

CONTAI
(TYP)

03 REVISION VALIDATION
15
02
TYP)

TYP)

THIS REVISION NO. 00A IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
254

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

51

ON
(

02 12-18000-0008-001
(

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

176

72

REV.NO. DATE REVISION DESCRIPTION

I
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED
TYP
6
SAUDI ARABIAN OIL COMPANY

AND
DECK PENETRATION
SEE STRUCTURAL DWG B S E C T I O N DRAWING TYPE

CATHODIC PROTECTION CAT

NG
SCALE NTS
ANODE JUNCTION BOX JB-08, 09 & 10

DRAWI
A S E C T I O N ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
SCALE NTS NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185089 001 00A
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BILL OFMATERIAL
NOTES:
DWG
STOCKNUMBER IU DESCRIPTION QTY
CODE 1. ALL MATERIALS AND FABRICATION SHALL BE IN
ACCORDANCE WITH COMPANY SPECIFICATIONS.
PDM

GROUNDING WIRE: 450/750V I/C 8 AWG (10 MM2) STRD CU PVC 2. ALL DIMENSIONS ARE IN MILLIMETERS.
01 DC 015 710-08 FT 5.00
INSULATED BUILDING GREEN
3. SEE NAMEPLATE SCHEDULE DWG NO. CD-352510

TAPE:ELECT COLOR CODE;3/4"WD X 0.007"THKGREEN;SCOTCH FOR NAMEPLATES.

03 14 908 363-00 RO 0.03
35 (66 FT/RO)

OF
4. FURNISHED BY ICCP VENDOR. UNDER P.O. NO.

514 514 2000-2020/64340-Ac.

10 01 550 343-00 FT TUBING:COPPER;1/2"OD X 0.032"WTHPOLYETHYLENE SHEATED 0.60

CONSENT
75 364 75 75 364 75 5. GLANDING AND TERMINATING ANODE CABLES TO
SEE DETAIL P-1 SEE DETAIL P-1
TERMINAL CONNECTOR: TINNED COPPER; CRIMP TYPE; JUNCTION BOX IS UNDER SUBMARINE CABLE SCOPE.
12 XX XXX XXX-XX EA 6.00
432 432 FOR 25MM2 CABLE SIZE.
6. ALL TAGS SHALL BE PRE FIXED BY 408-5B.
SEE DETAIL-7 SEE DETAIL-7 TERMINAL CONNECTOR: TINNED COPPER; KPA-25:
13 XX XXX XXX-XX EA 6.00
21 21 FOR 50MM2-70MM2 CABLE SIZE.
FOR BUS BAR FOR BUS BAR

TTEN
DETAILS DETAILS
16 15 14 13 TERMINAL CONNECTORS 16 15 14 13 TERMINAL CONNECTORS BOLT: SS 316L; SIZE: 12MM DIA X 38MM LONG
14 DC 010 330-00 EA 24.00
FURNISHED WITH PANEL FURNISHED WITH PANEL

WRI
(2 PLACES) (2 PLACES)
BAKELITE BACK BAKELITE BACK
BUS BAR BUS BAR 15 DC 010 141-00 EA NUT: SS 316L; SIZE: FOR 12MM DIA BOLT 24.00
PANEL PANEL

THE
16 14 188 844-00 EA WASHER: SS 316L; ROUND FLAT; SIZE: FOR 12MM DIA HOLE 48.00
16 15 14 22 21 16 15 14 22 21

A (2 PLACES) A (2 PLACES) 17 XX XXX XXX-XX EA

HUB: 1" DIA. ZINC PVC CTD WITH GROUND & GALVANIZED
6.00

THOUT
STEEL PLUG FOR USE ON 120MM2 HMWPE CABLE. (BY VENDOR)
578

578
546

546
514

514
PC-0583 SEE DETAIL-9 PC-0589 SEE DETAIL-9 HUB: 1 1/4" DIA. ZINC PVC CTD WITH GROUND FOR USE ON
18 XX XXX XXX-XX EA 6.00 00A
FOR BUS BAR FOR BUS BAR 70MM2 ANODE ARMORED CABLE. (BY VENDOR)

WI
DETAILS DETAILS
HUB: 3/4" DIA. ZINC PVC CTD WITH GROUND & GALVANIZED REVISION CLOUD OMITTED
19 XX XXX XXX-XX EA 3.00
PC-0628 NOTE 5 PC-0630 NOTE 5 STEEL PLUG FOR USE ON 25MM2 THHN/THWN CABLE. (BY VENDOR)

NG
PC-0582 PC-0588 FOR CLARITY.

DRAWI
NOTE 5 PC-0627 PC-0590 NOTE 5 PC-0629 PC-0601 GLAND: 1 1/4" NPT, BARRIER TYPE, DOUBLE COMPRESSION, Exd/Exe,

20 XX XXX XXX-XX EA IIC, IP66, NICKEL PLATED BRASS, NPT THREADED CONNECTION WITH 6.00
GROUNDING GROUNDING PVC SHROUD FOR USE ON 70MM2 ARMORED ANODE CABLE. (BY

BUS BAR BUS BAR VENDOR)

S
THI
(2 PLACES) 13 (2 PLACES) 13 21 XX XXX XXX-XX EA WASHER: SS 316L; LOCK; SIZE: FOR 12MM DIA HOLE 24.00
03 03
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

FROM
EARTHING STUD SUITABLE EARTHING STUD SUITABLE 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
SEE DETAIL P-2 SEE DETAIL P-2 22 XX XXX XXX-XX EA TERMINAL CONNECTOR: TINNED COPPER; CLAMP TYPE; TWO HOLES
FOR 1CX25MM2 GROUNDING FOR 1CX25MM2 GROUNDING 6.00
FOR 120MM2 CABLE SIZE. INTERNAL DSND CHKD APPR
DATE DESCRIPTION
CABLE WITH NUT, BOLT WASHER, LUG CABLE WITH NUT, BOLT WASHER, LUG REVISION BY BY BY
17 25 (2 PLS) 17 25 (2 PLS)
23 XX XXX XXX-XX EA TERMINAL CONNECTOR: TINNED COPPER; CRIMP TYPE; TWO HOLES 6.00 MPP REVISION CONTROL

NED
1/2" DIA. NPT S/S 01 1/2" DIA. NPT S/S 01 FOR 70MM2 CABLE SIZE.
BREATHER & DRAIN 18 20 (2 PLS) BREATHER & DRAIN 18 20 (2 PLS) NATIONAL PETROLIUM CONSTRUCTION COMPANY

OBTAI
(TYP) (TYP) STUFFING CABLE GLAND: ZONE 1, GAS GROUP IIB, T3, EX
D/ EX E, IP65 (MIN), NICKEL PLATED BRASS, NPT THREADED, REFERENCE DRAWINGS
PC-0627 PC-0629
19 24 19 24 24 XX XXX XXX-XX EA C/W EARTH TAG, LOCK NUT, WASHERS, UV PROTECTED PCP 3.00
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
SHROUDS; SUITABLE FOR 600/1000V; CU/XLPE/GSWA/PVC
PC-0628 ELEC GENERAL NOTES LEGEND & ABBREVIATIONS CA-352530
C-0605 C-0631 CABLES; 3/4" NPT

BE
PC-0630
CATHODIC PROTECTION LAYOUT-MAIN DECK RA-185092-002
C-0603 C-0606 C-0602 STUFFING CABLE GLAND: ZONE 1, GAS GROUP IIB, T3, EX D/EX E,
CABLE & CONDUIT SCHEDULE CD-446034

PART,SHALL
C-0632
25 XX XXX XXX-XX EA IP65 (MIN), NICKEL PLATED BRASS, NPT THREADED, C/W EARTH TAG, 6.00
LOCK NUT, WASHERS, UV PROTECTED PVC SHROUDS; SIZE: 1'' NPT.

SEE DETAIL-5 SEE DETAIL-6

NOTE 1. ITEMS 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 & 23
THIS DWG FOR DRILLING BOTTOM THIS DWG FOR DRILLING BOTTOM
ARE INCLUDED IN ANODE JUNCTION BOX PURCHASE.

JB-009 JB-010

N
I
(COVER NOT SHOWN FOR CLARITY) (COVER NOT SHOWN FOR CLARITY)

FULL,OR
4 D E T A I L 4A D E T A I L
RA-185089 RA-185089
SCALE NTS SCALE NTS
SH 001 SH 001

N
I ON
REPRODUCTI
KEY PLAN

U
T
G M
R
I
D

514 30°

PLATFORM

SAUDIARAMCO.NO
75 364 75
SEE DETAIL P-1
NORTH
432
PREVAILING WIND
SEE DETAIL-7
21 FOR BUS BAR
DETAILS
16 15 14 13 TERMINAL CONNECTORS B A
FURNISHED WITH PANEL
(2 PLACES)
BAKELITE BACK
BUS BAR
PANEL

OF
16 15 14 22 21

PROPERTY
(2 PLACES) 2
578

546

514

PC-0982 SEE DETAIL-9

FOR BUS BAR MAIN DECK
DETAILS

PC-0981 PC-0993 NOTE 5 1

SOLE
NOTE 5 PC-0992 PC-0990

GROUNDING

THE
BUS BAR JB-008
ANODE
JUNCTION JB-009
(2 PLACES) 13

ARE
03
BOX
JB-010
EARTHING STUD SUITABLE
SEE DETAIL P-2
FOR 1CX25MM2 GROUNDING

N
HEREI
CABLE WITH NUT, BOLT WASHER, LUG SCALE
17 25 (2 PLS)
1/2" DIA. NPT S/S 01
BREATHER & DRAIN 18 20 (2 PLS)
(TYP)

NED
SCALE: N.T.S
PC-0992

CONTAI
19 24

C-0988 REVISION VALIDATION

PC-0993
THIS REVISION NO. 00A IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
C-0991 REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
C-0989

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
SEE DETAIL-10
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
THIS DWG FOR DRILLING BOTTOM

REV.NO. DATE REVISION DESCRIPTION

JB-008

I
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION
(COVER NOT SHOWN FOR CLARITY)

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED
4B D E T A I L
SAUDI ARABIAN OIL COMPANY

AND
RA-185089
SCALE NTS
SH 001 DRAWING TYPE

CATHODIC PROTECTION CAT

NG
ANODE JUNCTION BOX JB-08, 09 & 10

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185089 002 00A
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:

1. FOR NOTES, REFER DWG RA-185089 SHEET 002.

2. FOR BOM QUANTITY, REFER DWG RA-185089

SHEET 002.

ENCLOSURE DRILL 1 HOLE SUITABLE FOR

OF
175 (NOTE 4) 3/4" DIA CONDUIT HUB
ENCLOSURE DRILL 1 HOLE SUITABLE FOR 528 1/2" DIA. NPT S/S HOLE DRILL 2 HOLE SUITABLE FOR

CONSENT
(NOTE 4) 25 150
3/4" DIA CONDUIT HUB
FOR BREATHER/DRAIN GLAND (NPT) HUB 1 1/4" DIA
1/2" DIA. NPT S/S HOLE DRILL 2 HOLE SUITABLE FOR 31 34 1C x 70MM2 CABLE
FOR BREATHER/DRAIN GLAND (NPT) HUB 1 1/4" DIA

34
1C x 70MM2 CABLE

70

TTEN
150
70
8

80
150

WRI
30
TAG NO.

CATHODIC PROTECTION

80
OFFSHORE POSITIVE TERMINAL
JUNCTION BOX
30
30

PLATFORM NO.
P.O NO.

THE
30 100 75 82 82 75 100

534

344

344
514

THOUT
514
100 75 82 82 75 100

514 MANUFACTURER'S NAME PLATE DRILL 2 HOLE SUITABLE FOR

CONDUIT HUB 1" DIA 1C x 120MM2 CABLE

WI
DRILL 2 HOLE SUITABLE FOR ABDULLA FOUAD - IMPALLOY LTD. CO.

P.O.BOX 257, DAMMAM 31411,

CONDUIT HUB 1" DIA 1C x 120MM2 CABLE KINGDOM OF SAUDI ARABIA.

NG
TEL : + 966 (13) 8473300
FAX : + 966 (13) 8472233
BACK

DRAWI
15x15x2mm THK.
BACK S.S. ANGLE BOTTOM VIEW OF ENCLOSURE JB-008

31
BOTTOM VIEW OF ENCLOSURE JB-009

S
10 D E T A I L

THI
1/2" DIA. NPT S/S SCALE NTS
5 D E T A I L 00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
BREATHER & DRAIN

FROM
00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
SCALE NTS
INTERNAL DSND CHKD APPR
DATE DESCRIPTION
REVISION BY BY BY
FRONT VIEW OF ENCLOSURE COVER RIGHT SIDE VIEW MPP REVISION CONTROL

NED
NOT TO SCALE
OF ENCLOSURE NATIONAL PETROLIUM CONSTRUCTION COMPANY

OBTAI
NOT TO SCALE
REFERENCE DRAWINGS
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
ELEC GENERAL NOTES LEGEND & ABBREVIATIONS CA-352530

BE
CATHODIC PROTECTION LAYOUT-MAIN DECK RA-185092-002

CABLE & CONDUIT SCHEDULE CD-446034

PART,SHALL
ENCLOSURE

N
DRILL 1 HOLE SUITABLE FOR

I
(NOTE 4) 3/4" DIA CONDUIT HUB

FULL,OR
1/2" DIA. NPT S/S HOLE DRILL 2 HOLE SUITABLE FOR
FOR BREATHER/DRAIN GLAND (NPT) HUB 1 1/4" DIA
1C X 70MM2 CABLE (SUBMARINE CABLE TO ANODE SLEDS)
50 50
{12mm HOLE
25
70

N
202 202 25

I
20

20
150

22 30 70 60 20 20 60 70 30 22

ON
16

16
80

REPRODUCTI
32

32
28
28
30

KEY PLAN
30
44

44
U
T
G M
12 R
100 75 82 82 75 100 I
D

514 30°

PLATFORM
P1 DETAIL P2 DETAIL

SAUDIARAMCO.NO
DRILL 2 HOLE SUITABLE FOR NORTH
CONDUIT HUB 1" DIA 1C x 120MM2 CABLE NOT TO SCALE NOT TO SCALE
BUS BAR DETAIL
PREVAILING WIND

BACK
7 D E T A I L
BOTTOM VIEW OF ENCLOSURE JB-010 SCALE NTS B A

6 D E T A I L

OF
SCALE NTS

PROPERTY
2

MAIN DECK

TERMINAL
(4 PLACES)
CONNECTOR FURNISHED 1

SOLE
WITH PANEL (4 PLACES)
6 8 9

BUS BAR

THE
JUNCTION BOX COVER FURNISHED
JB-008
WITH PANEL ANODE
JUNCTION JB-009

ARE
BOX
JB-010

N
HEREI
TYP)
SCALE

25
110 (4 PLACES) 9

(
12

NED
12 20 23 23 20 12
SCALE: N.T.S
NAME PLATE

CONTAI
(INSIDE) NAME PLATE
25

(OUTSIDE)
REVISION VALIDATION

BAKELITE BACK PANEL THIS REVISION NO. 00A IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
STAND-OFF 9 10
FURNISHED WITH PANEL REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

S/S 316 MATERIAL FURNISHED

ON
(4 PLACES) (4 PLACES) 12-18000-0008-001
GROUNDING BUSBAR DETAILS WITH PANEL

NFORMATI
(4 PLACES) DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

9 D E T A I L
SCALE NTS 8 D E T A I L REV.NO. DATE REVISION DESCRIPTION

I
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION
SCALE NTS A D E T A I L

THE
JOB ORDER/EWO NO.
SCALE NTS THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
ANODE JUNCTION BOX JB-08, 09 & 10

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185089 003 00A
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BILL OFMATERIAL
NOTES:
DWG
STOCKNUMBER IU DESCRIPTION QTY 1. ALL MATERIALS AND FABRICATION ARE IN
CODE
A ACCORDANCE WITH COMPANY SPECIFICATIONS.
PDM

SCOPE
SCOPE
- ANGLE:CS 50MM X 50MM X 6MM THKGRADE S235JR (ST 37-2)EN
2. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER
01 12 407 585-00 PC 2.12 TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
JB-011 10025OR ASTM A36M/A6M (4.47 KG/MT)(6 MT/PC)
JB-012 3. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
CLAMP:CABLE;316 SST;P-TYPE;1-HOLE;W/BOLT A193 B8M;

HOOK-UP
ONSHORE
00B JB-043 02 DC 015 640-04 EA NUT,2 EA FLATWASHERS,1EA LOCKWASHER;A194 8M;0.38"ID 14.00 4. ALL CONDUIT CONNECTIONS ARE COATED WITH

OF
(3/8") PVC PATCHING COMPOUND.
NEGATIVE
SPLITTER BOX PLATE:CS10MM THK X 2500MM X 6000MM A36M (164.63 #/SM) 5. FURNISHED BY ICCP VENDOR UNDER

CONSENT
03 12 066 190-00 SM 0.07
USE 12-066-181-00. P.O. NO.2000-2020/64340-Ac
4 7 8 9

OFFSHORE
C-0986
RA-185090 RA-185090 RA-185090 6. ALL TAGS SHALL BE PREFIXED BY 408-5B.
(3 PLACES) BOX: CATHODIC PROTEC NEGATIVE; SS316L TYPE; NEMA 4X;
SH 002 SH 002 SH 002
514MMx514MMx150MM; W/BUS BARS, GND BUS, TWO HOLE 7. UNUSED ENTRIES TO BE PLUGGED WITH BLANKING
NOTE 5 04 DC 017 146-00 EA 3.00
CABLE CONN. W/NUTS, BOLTS & WASHER;W/INTEGRAL
PLUGS.
DRAIN & BREATHER

TTEN
05 12 435 612-00 FT CHANNEL:CS C4 X 5.4#/FT A36 (35 - 40 FT LG) 30.00

WRI
08 12 413 071- 00 FT ANG LE:CS,3-1/2"X 3-1/2"X 1/4"THK A36 (
35 - 40 FT LG ) (
5.8#/FT) 3.
70
TAG NO. TAG NO. TAG NO.

CATHODIC PROTECTION CATHODIC PROTECTION CATHODIC PROTECTION

OFFSHORE NEGATIVE TERMINAL OFFSHORE NEGATIVE TERMINAL OFFSHORE NEGATIVE TERMINAL
GROUNDING WIRE: 450/750V I/C 4 AWG (25 MM2) STRD CU PVC

THE
SPLITTER BOX SPLITTER BOX SPLITTER BOX
PLATFORM NO.
P.O NO.
PLATFORM NO.
P.O NO.
PLATFORM NO.
P.O NO. 09 15 194 415-00 FT 30.00
INSULATED BUILDING GREEN
NAME PLATE NAME PLATE NAME PLATE

00B
JB-011 JB-012 JB-043 COMPOUND: PATCHING; FOR PVC COATED CONDUIT 16 OZ (0.5
NOTE 7 12 15 307 500-00 CN 1.00

THOUT
LT/CN) (SL12AC) OR EQUIVALENT.
NEGATIVE SPLITTER NEGATIVE SPLITTER NEGATIVE SPLITTER
BOX BOX BOX LUBRICANT: THREAD; ANTI-GALLING LITHIUM BASE (1.75 OZ/TU);
13 14 839 050-00 TU 1.00
CH STL2 OR EQUIVALENT.

WI
16 DC 015 630-15 PK CABLE TIE: SIZE 6.0MM WIDE X 450MM LONG NYLON COATED SS316, 0.25
C-0607 FULLY COATED BALL-LOCK TIES 6.4X450MM-STEMCO3

NG
C-0618
C-0987

DRAWI
C-0609
C-0995 C-0617
C-0612
19 XX XXX XXX-XX EA DRAIN: SST 1/2" FOR WATER ONLY; CH ECD11/ OZ DB50 13.00
C-0626
C-0610 C-0619 OR EQUIVALENT.
C-0613
C-0620
C-0611 BOLT:U;SST 1"NOM PIPE SIZE 1/4"-20 X 2"CENTER OF PIPE TO
C-0608

S
21 DC 010 063-02 EA END OFBOLT A193GR B8M AISI316L W/2HEX NUT A194GR 8M 38.00

THI
AISI316L
C-0614 C-0621
COUPLING
C-0616 (38 PL) BODY: GUAT; 1" NEMA 4; 3" THD COVER PVC CTD; 00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
SEE DWG 22 15 591 110-00 EA 13.00

FROM
SESCO S3C CAT. NO. GUAT-36 WOD OR EQUIVALENT.
C-0615 9 C-0984 RA-185091 00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
21 ELBOW: CND; 90° RGS 1" MNPT X 12" RAD PVC CTD;
23 DC 015 850-03 EA 13.00 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
C-0985 W/HEAD ACCESS AREA SESCO S3C CAT. NO. ELB-100 OR EQUIVALENT.
INTERNAL DSND CHKD APPR
DECK DATE DESCRIPTION

NED
(10 PL) REVISION BY BY BY
(10 PL) (10 PL) 24 DC 015 141-04 EA
REDUCER: CND; 1" TO 1/2" M/F; SESCO S3C CAT. NO. RE31
13.00
PENETRATION TO WELLHEADS
(3 PL) 16 OR EQUIVALENT. MPP REVISION CONTROL

OBTAI
25 22 SEE DWG
23
W/HEAD RA-185091 UNION: CND; RGS PVC CTD 1" M/F STRAIGHT; SESCO S3C CAT. NO. NATIONAL PETROLIUM CONSTRUCTION COMPANY
25 DC 015 153-00 EA 13.00
ACCESS AREA UNY-305 OR EQUIVALENT.
REFERENCE DRAWINGS
26 14 872 276-00 PK COMPOUND:SEALING;'DUXSEAL'SYNTHOILBASE (5LB/PK) 0.20

BE
(14 PLACES) DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
30 XX XXX XXX-XX EA CONDUIT: RGS, PVC COATED 1"W/1 COUPLING AT ONE END;
2 10.00
RIGID STEEL, HOT DIP GALV (10FT/PC). ELEC GENERAL NOTES LEGEND & ABBREVIATIONS CA-527971

PART,SHALL
31 XX XXX XXX-XX EA CONDUIT: RGS, PVC COATED 2"W/1 COUPLING AT ONE END; CATH PROT L/O W/H ACC AREA & MEZZ DK RA-185092-001
#4 AWG GND 0.2
** WIRE
RIGID STEEL, HOT DIP GALV (10FT/PC).
CATH PROTECTION L/O MAIN DECK RA-185090-002

CABLE & CONDUIT SCHEDULE (ELEC) CD-446034

ITEM NO.4 IS SUPPLIED BY THE ICCP VENDOR.
19 24 (10 PL) CATHODIC PROTECTION - WELLHEAD CONNECTION RA-185091
#4 AWG GROUNDING
GROUNDING LAYOUT CA-445998
TO REC-002 CONDUCTOR SEE
PC-0586 GROUNDING PLAN
TO REC-003 DWG CA-445998 (TYP)
PC-0587

N
I
PC-0977

PC-0978 12" ELEC TRAY

FULL,OR
PC-0584
BOT EL (+) 14175
PC-0585
12 26
TO REC-001

(LOOKING EAST)
12" ELEC TRAY (6 PLACES)

N
I
BOT EL (+) 14175

ON
A V I E W

REPRODUCTI
- SCALE NTS C
ELEVATION
- KEY PLAN
(LOOKING SOUTH)

U
IMPRESSED CURRENT NEGATIVE SPLITTER BOX G
T
M
R
(TYP) 5 1986 I
D

SAUDIARAMCO.NO
29.25°

1 D E T A I L 140 364 307 364 307 364 140 PLATFORM

RA-185092 NORTH
SCALE NTS
SH 001
PREVAILING WIND NEGATIVE

51
SPLITTER BOX
JB-011, JB-012 & JB-043

00B DRILL 12mm (‹") { WELLHEAD

B A
JB-011 JB-012 JB-043
546

546
452
HOLE FOR …" { BOLT ACCESS

OF
NEGATIVE SPLITTER NEGATIVE SPLITTER NEGATIVE SPLITTER 5
(4 PLACES) AREA
BOX BOX BOX

PROPERTY
2

MEZZANINE
2 DECK
387
1524

SOLE
1986 474 8 8 1
(2 PLACES) 3

THE
(2 PLACES) 5 142
51
B 5

ARE
(TYP)
(TYP) -

N
584

HEREI
TYP)

CABLE DECK SCALE

192

(2 PLACES)
PENETRATION PENETRATION 3
CABLE PENETRATION
(

3
SEE STRUCTURAL DWG
TYP)

NED
W/HEAD
W/HEAD ACCESS
383

1 N T S
45

SCALE:
ACCESS AREA
AREA
36

CONTAI
(

REVISION VALIDATION
6161

260

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

**

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
1800 94 2120 (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

1 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

** CONDUIT SUPPORT HOLE SHALL REV.NO. DATE REVISION DESCRIPTION

I
BE DRILLED TO SUIT AT SITE. 00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR

ELEVATION 12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
(LOOKING SOUTH)
B S E C T I O N C V I E W DRAWING TYPE

SCALE NTS
IMPRESSED CURRENT NEGATIVE SPLITTER BOX SCALE NTS
CATHODIC PROTECTION CAT
- -

NG
(ALL SEAL WELD CONSTRUCTION) NEGATIVE SPLITTER BOX JB-011,012 & 043

DRAWI
ALL EQUIP, INSTRUMENT
2 ZULF 410/419
D E T A I L AND PIPING TAG
NUMBERS ARE PRECEDED

SCALE NTS
BY PREFIX NO. ZULUF SAUDI ARABIA
-

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185090 001 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BILL OFMATERIAL
NOTES:
DWG
150 STOCKNUMBER IU DESCRIPTION QTY
CODE
1. ALL MATERIALS AND FABRICATION ARE IN
PDM
5 ACCORDANCE WITH COMPANY SPECIFICATIONS.
528
08 02 157 079-00 EA COUPLING:FNPT;SST 1/2"X 3000# A182/F316L 3.00
2. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER
09 DC 015 600-02 EA 1/2" DIA. NPT S/S 316L DRAIN & BREATHER 3.00 TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
COMPOUND: PATCHING; FOR PVC COATED CONDUIT 16 OZ (0.5
10 15 307 500-00 CN 1.00 3. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
LT/CN) (SL12AC) OR EQUIVALENT.

OF
LUBRICANT: THREAD; ANTI-GALLING LITHIUM BASE 4. ALL CONDUIT CONNECTIONS ARE COATED WITH
11 14 839 050-00 TU 1.00
(1.75 OZ/TU); CH STL2 OR EQUIVALENT. PVC PATCHING COMPOUND.

CONSENT
12 XX XXX XXX-XX EA BUSHING END: CND; 1" INSUL PVC CTD; APP BU-100I-PVC 38.00 5. SEE NAMEPLATE SCHEDULE DWG CD-352510 FOR
OR EQUIVALENT.
NAMEPLATES.
TERMINAL CONNECTOR: TINNED COPPER; CRIMP TYPE;
13 14 198 136-00 EA 14.00 6. ALL TAGS SHALL BE PREFIXED BY 408-5B.
TWO 13MM DIA HOLES FOR 70MM2 CABLE SIZE.

DRILL 60mm HOLE 7. UNUSED ENTRIES TO BE PLUGGED WITH BLANKING

TTEN
14 DC 010 330-00 EA BOLT: SS 316L; SIZE: 12MM DIA X 38MM LONG 56.00
SUITABLE FOR 2" HUB PLUGS.
50
TAG NO.
NUT: SS 316L; SIZE: FOR 12MM DIA BOLT 8. BUSHING SHALL BE INSTALLED ON BOTH ENDS OF

WRI
CATHODIC PROTECTION 15 DC 010 041-01 EA 56.00
25 THE CONDUIT.
OFFSHORE NEGATIVE TERMINAL
SPLITTER BOX Ø12mm HOLE
PLATFORM NO. 16 XX XXX XXX-XX EA WASHER: SS 316L; ROUND FLAT; SIZE: FOR 12MM DIA HOLE 112.00

THE
P.O NO.

32
344
514
534

344
TERMINAL CONNECTOR: TINNED COPPER; CRIMP TYPE;

16
17 14 198 144-00 EA 14.00
TWO 13MM DIA HOLES FOR 120MM2 CABLE SIZE.

THOUT
18 15 444 168-00 EA NIPPLE:CND;RGS 2"X 2 1/2"LG CLOSE PVC CTD 1.00
NAMEPLATE
75
(NOTE 5 & 6) 19 DC 014 604-04 EA BUS BAR: TINNED COPPER; 6MM X 432MM X 432MM. 3.00
PL-5
S.S.

WI
HUB: 1" DIA. ZINC PVC CTD WITH GROUND & GALVANIZED
20 83 011 221-00 EA 19.00

318
STEEL PLUG FOR USE ON 70-120MM2 HMWPE UNARMORED
P1-DETAIL

NG
CABLE. (BY VENDOR)

DRAWI
21 XX XXX XXX-XX EA WASHER: SS 316L; LOCK; SIZE: FOR 12MM DIA HOLE 56.00
12
22 HUB: 2" DIA. ZINC PVC CTD WITH GROUND & GALVANIZED STEEL 4.00
XX XXX XXX-XX EA
15x15x3mm THK. PLUG FOR USE ON 70-120MM2 HMWPE UNARMORED CABLE.
(BY VENDOR)

S
S.S. ANGLE

THI
16
23 XX XXX XXX-XX EA 1" NPT Exe/Exd BLANKING PLUG, MODEL NO CCG-PHN001E 1.00

32

FROM
STUFFING CABLE GLAND: ZONE 1, GAS GROUP IIB, T3, EX D/EX E,
24 XX XXX XXX-XX EA IP65 (MIN), NICKEL PLATED BRASS, NPT THREADED, C/W 19.00
25 EARTH TAG, LOCK NUT, WASHERS, UV PROTECTED PVC SHROUDS;
PL-5 50 SIZE: 1'' NPT.
S.S.

NED
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
NEOPRENE ITEMS 8,9,12,13,14,15,16,17 & 19 AREINCLUDED IN THE SPLITTER BOX PURCHASE.

OBTAI
GASKET
P2-DETAIL 00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
DRAIN/BREATHER 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
FRONT LID
SS316L (TYP) INTERNAL DSND CHKD APPR
DATE DESCRIPTION
REVISION BY BY BY

ENCLOSURE COVER DETAIL FRONT LID MPP REVISION CONTROL

BE
RIGHT SIDE VIEW OF ENCLOSURE
SCALE NTS NATIONAL PETROLIUM CONSTRUCTION COMPANY
SCALE NTS

PART,SHALL
REFERENCE DRAWINGS
514 514 514
DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
ELEC GENERAL NOTES LEGEND & ABBREVIATIONS CA-527971
364 364 364
CATH PROT L/O W/H ACC AREA & MEZZ DK RA-185092-001

CATH PROTECTION L/O MAIN DECK RA-185092-002

SEE DETAIL-P1 SEE DETAIL-P1 SEE DETAIL-P1
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034

N
I
00B
JB-011 JB-012 JB-043 DRAIN AND BREATHER INSTALLTION DETAIL CA-527851

FULL,OR
TERMINAL CONNECTORS 17 16 15 14
FURNISHED W/PANEL 5 11

N
6

I
(TYP) PC-0581 PC-0979

- 13 14 15 16 -

ON
3 PL 19
C-0626 - C-0986

REPRODUCTI
KEY PLAN

U
T
G M
R
I
D
29.25°

PLATFORM

SAUDIARAMCO.NO
NORTH
A B C
22 22 22 PREVAILING WIND

- - - NEGATIVE
18 18 SPLITTER BOX
JB-011, JB-012 & JB-043

PC-0584 PC-0586
PC-0587 PC-0977
PC-0585
PC-0978 B A
L TO R WELLHEAD
L TO R
PC-0591 ACCESS

OF
PC-0980 AREA
PC-0592 L TO R
PC-0994
PC-0604 PC-0597

PROPERTY
PC-0593 PC-0596
(NOTE 7)
PC-0595 20 24 PC-0598 2
23
PC-0594 PC-0599
8 PL
PC-0600 MEZZANINE
DECK

SOLE
1
WELD M8X10mm LONG P2 4 10
SS STUD WITH NUT
3 - -

THE
FOR GROUNDING
20 24
-
DRAIN/BREATHER 24 20

ARE
4 PL
SS316L (TYP)
12 SEE DETAIL-P2 DRAIN/BREATHER 7 PLS 12
1 SS316L (TYP)
(NOTE 8)

N
C-0607 (NOTE 8)

HEREI
CA-527851 SCALE
SH 001 C-0611
C-0609
C-0612 C-0615 C-0987
C-0618
C-0985
8 9 C-0613 C-0616 C-0610

NED
C-0995 C-0621
C-0614 C-0617 N T S
SCALE:
C-0608 C-0620
(COVER NOT SHOWN FOR CLARITY) C-0984

CONTAI
C-0619
(COVER NOT SHOWN FOR CLARITY)
8 (COVER NOT SHOWN FOR CLARITY)
D E T A I L REVISION VALIDATION
BUS BAR FURNISHED
7 D E T A I L RA-185090
SCALE NTS
WITH PANEL SH 001
9 D E T A I L THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

RA-185090 REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

SCALE NTS RA-185090
SH 001 SCALE NTS

ON
SH 001 12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

BUS BAR BUS BAR REV.NO. DATE REVISION DESCRIPTION

I
FURNISHED FURNISHED 00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

WITH PANEL WITH PANEL

THE
JOB ORDER/EWO NO.
SPACER WITH BOLTS & NUTS SPACER WITH BOLTS & NUTS THIS REVISION IS NOT TO BE USED FOR

TO BE FURNISHED WITH PANEL TO BE FURNISHED WITH PANEL

12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
NEGATIVE SPLITTER BOX JB-011,012 & 043

DRAWI
A S E C T I O N B S E C T I O N C S E C T I O N ALL EQUIP, INSTRUMENT
ZULF 410/419
BAKELITE BACK PANEL TO BAKELITE BACK PANEL TO BAKELITE BACK PANEL TO AND PIPING TAG
NUMBERS ARE PRECEDED
BE FURNISHED WITH PANEL SCALE NTS SCALE NTS BE FURNISHED WITH PANEL SCALE NTS BE FURNISHED WITH PANEL
- - - BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
TYPICAL FOR JB-011 TYPICAL FOR JB-012 TYPICAL FOR JB-043
00B
5B 408 X RA-185090 002 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:

1. FOR NOTES, REFER DWG RA-185090 SHEET 001.

OF
CONSENT
TTEN
WRI
THE
1/2" DIA. NPT
BREATHER/DRAIN 514
514 514

THOUT
175 54 55 55 175
77 45 90 45 45 45 45 45 77 77 45 45 45 45 45 90 45 77
47

47

WI
1/2" DIA. NPT

75
1/2" DIA. NPT
BREATHER/DRAIN

NG
BREATHER/DRAIN 00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

150
150

150

DRAWI
00A 04/26/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

46

46
INTERNAL DSND CHKD APPR
DATE DESCRIPTION
REVISION BY BY BY

MPP REVISION CONTROL

S
38
38

THI
DRILL 4 HOLE SUITABLE FOR 1" CONDUIT HUB
38

38
DRILL 8 HOLE SUITABLE FOR 1" CONDUIT HUB
38 2x70sqmm(FOR NEGATIVE DRAIN CABLE/SPARE) & NATIONAL PETROLIUM CONSTRUCTION COMPANY
38 6x70sqmm(FOR NEGATIVE DRAIN CABLE/SPARE) &
2x120sqmm(FOR NEGATIVE HEADER CABLE)
2x120sqmm(FOR NEGATIVE HEADER CABLE)
REFERENCE DRAWINGS

FROM
DRILL 8 HOLE SUITABLE FOR 1" CONDUIT HUB
BOTTOM VIEW 6x70sqmm(FOR NEGATIVE DRAIN CABLE/SPARE) & DWG. CONTROL FOR J.O.12-18000-0008 CE-464735
2x120sqmm(FOR NEGATIVE HEADER CABLE)
ELEC GENERAL NOTES LEGEND & ABBREVIATIONS CA-527971

BOTTOM VIEW

NED
JB-012 BOTTOM VIEW
CATH PROT L/O W/H ACC AREA & MEZZ DK RA-185092-001

CATH PROTECTION L/O MAIN DECK RA-185092-002

OBTAI
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034
JB-011
JB-043 00B
D E T A I L 4
NTS SCALE

BE
3 D E T A I L
D E T A I L 10
SCALE NTS

PART,SHALL
NTS SCALE

432

N
432

I
FULL,OR
15 22 28 56 28 28 28 28 28 31 45 80 15 15 80 45 34 28 28 28 34 45 80 15
5

5
15

15

15
15
27.

27.
34

34

N
I ON
REPRODUCTI
100

100
70

70
32

70
70

32
45

45

45
KEY PLAN

U
T
G M
R
5

5
I
D
34

34
27.

27.
15

15

15
15
29.25°

PLATFORM

SAUDIARAMCO.NO
NORTH
DRILL & TAP FOR 13MM DIA. BUS BAR DETAILS DRILL & TAP FOR 13MM DIA.
BUS BAR DETAILS NATIONAL COURSE THREADS-20 HOLES NATIONAL COURSE THREADS-16 HOLES PREVAILING WIND

JB-011 JB-012
NEGATIVE
SPLITTER BOX
5 6 D E T A I L
D E T A I L JB-011, JB-012 & JB-043

SCALE NTS
SCALE NTS

WELLHEAD
B A
ACCESS

OF
AREA

PROPERTY
2

MEZZANINE
DECK

SOLE
1

THE
432

ARE
15 80 45 31 28 28 28 28 28 56 28 22 15

N
HEREI
5 SCALE

15
15

27.
34

NED
SCALE: N T S

CONTAI
100
70
70

32

45

REVISION VALIDATION

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

5

ON
34

27.

12-18000-0008-001

15
15

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

BUS BAR DETAILS DRILL & TAP FOR 13MM DIA.

NATIONAL COURSE THREADS-20 HOLES REV.NO. DATE REVISION DESCRIPTION

I
JB-043 00B
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
11 D E T A I L 12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SCALE NTS SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
NEGATIVE SPLITTER BOX JB-011,012 & 043

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185090 003 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BILL OFMATERIAL
NE NOTES:
GA DWG
TI 1 CODE
STOCKNUMBER IU DESCRIPTION QTY
VE
JB RA-185090 1. ALL MATERIALS AND FABRICATION SHALL BE IN
-0 BO SP -
11 XE LI SH 001 ACCORDANCE WITH COMPANY SPECIFICATIONS.
26 S TT MOLD: TAP; CABLE TO STEEL 30" & LARGER PIPE 70MM2
-06 ER 01 XX XXX XXX-XX EA 1.00 2. DIMENSIONS SHOWN ARE IN MILLIMETERS.
C JB 45° DOWN.
-0 C-0986
07 12 02 XX XXX XXX-XX EA CLAMP:MOLD;CHANGE HANDLE;CADWELD L-160 1.00 3. BONDING JUMPER FROM WELL CONDUCTOR
-06
C TO DRILLING DECK PLATE REQUIRED FOR ALL
09 JB 03 XX XXX XXX-XX BX POWDER:WELD METAL 10 CART & DISC 90F20 16.00
- 06 -0 WELLHEADS.

OF
C 43 00B
84 04 XX XXX XXX-XX EA COUPLING:CND;FNPT 1"RGS PVC CTD 20.00
-09 4. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER
C 85 ANGLE:CS 100MM X 100MM X 10MM THK,DIN 1028 EN

CONSENT
-09 05 XX XXX XXX-XX PC 0.70 TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
C 10025-S235JR (ST 37-2),ASTM A36M,(15.1 KG/MT),(12
11 5. STOP CABLE ROUTING AT COUPLINGS. ALLOW ENOUGH
-06 ANGLE:CS 50MM X 50MM X 6MM THKGRADE S235JR (ST
C 10 08 XX XXX XXX-XX PC 1.70 LENGTH OF CABLE TO REACH WELLHEADS AS
37-2)EN 10025OR ASTM A36M/A6M (4.47 KG/MT)(6
-06 SHOWN ON OFFSHORE INSTALLATION. TAPE END OF
C
BOLT:U;SST 1"NPS,3/8" - 16 X 1 1/2"CENTER OF PIPE CABLE, COIL OUTSIDE OF COUPLING AND PROTECT
09 XX XXX XXX-XX EA TO END OF BOLT,ASTM A193GR B8M AISI316L,UNC-2A/2B 50.00 FROM DAMAGE,

TTEN
THD,WITH 2HEX NUTS,ASTM A194GR 8M AISI316.
6. FOR METHOD OF INSTALLATION AND FORMATION
OF THERMITE WELD, REFER TO MANUFACTURER'S

WRI
COATING:PRIMER;BLACK,HVY DUTY,2-COMP EPOXY,

REA CONNECTION TO 13 XX XXX XXX-XX KT

APCS-26,RAL 9011 BLACKCOMPOUND,HPINTERGUARD HB
0.12
INSTRUCTIONS.
A JACKET LEG MASTIC OR INT'LINTERSEAL 738EQUAL (10 LT/KT)
S 7. ALL THERMITE WELDED CONNECTIONS SHALL BE
ES
COLUMN 1B (SL12AC)

THE
C COATED WITH EPOXY PRIMER AND, WHERE POSSIBLE,
AC C-0995
C-0987
TAPE:ELECT COLOR CODE;3/4"WD X 0.007"THKGREEN;
TAPED WITH GREEN PVC TAPE.
AD 14 XX XXX XXX-XX RO 2.00
E SCOTCH 35 (66 FT/RO)
H 29 CONNECTION TO
LL

THOUT
JACKET LEG 8. ALL CONDUIT CONNECTIONS SHALL BE COATED WITH
WE COLUMN 2A
UNION: CND; RGS PVC CTD 1" F/F STRAIGHT;
15 XX XXX XXX-XX EA 37.00 PVC PATCHING COMPOUND.
SESCO S3C CAT. NO. UNF-305
B
LUBRICANT:THREAD;ANTI-GALLINGLITHIUM BASE (1.75

WI
17 XX XXX XXX-XX TU 2.00
OZ/TU);CH STL2
LL
15 WE 8 #8 REDUCER,CONDUIT:1"X 1/2"CND,RIGID,STEEL,MALE X

NG
19 XX XXX XXX-XX EA 10.00
-06 41OT 15 23 FEM NPT,CH# RE31,

DRAWI
C # SL
14
-06 BODY: GUAT; 1" NEMA 4; 3" THD COVER PVC CTD;
C 22 XX XXX XXX-XX EA 10.00
SESCO S3C CAT. NO. GUAT-36 WOD
6
41 9 29 NIPPLE: CND; RGS 1" X 2" LG PVC CTD 32.00
# 6 41 23 XX XXX XXX-XX EA
SESCO S3C CAT. NO. NPL-100200
# # 10

S
L #

THI
L 16
2 E
W L OT
06 ELL T COMPOUND:PATCHING;FOR PVC COATEDCONDUIT 16 OZ (0.5 2.00
61 C- W L O 25 XX XXX XXX-XX CN
0 S S LT/CN)(SL12AC)SHELF LIFE ITEM;MSDSITEM
13 C-
-06 PLATE:CS10MM THK X 1250MM WD X 2500MM LG A36M
C 0.09

FROM
2 26 XX XXX XXX-XX PC
(3.125 SM/PC).
4 1
41 062
COMPOUND:SEALING;POWDER;1 LB/CANCHICO "A"POWDER 4.00
# C- 27 XX XXX XXX-XX CN
L #4 INE W/ 1 OZCHICO "X"FIBER;CHCHICO A4
L 8 L 20
E 60 RE 06

NED
W O T 0 -
SL C- WI LE C
30.00
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
PO LL 29
BODY:LBH;1"W/COVER PVC CTD;CH LBH30-PVC/ APP
00A 03/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
XX XXX XXX-XX EA

OBTAI
2 E
41 W 17 #7
4
ELBD100-PVC
# 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
L #2 # OT
26 L T 7 SL UNION: CND; RGS PVC CTD 1" M/F STRAIGHT; 23.00
90
WE O 61 30 XX XXX XXX-XX EA
INTERNAL
DATE DESCRIPTION
DSND CHKD APPR
SL
0
C- SESCO S3C CAT. NO. UNY-305 REVISION BY BY BY
29 9 15
61 #4 MPP REVISION CONTROL

BE
0 10.00
C- LL #5 ICCP CONDUIT ROUTING DIAGRAM 31 XX XXX XXX-XX EA DRAIN: SST 1/2" FOR WATER ONLY; CH ECD11
6 WE OT E NATIONAL PETROLIUM CONSTRUCTION COMPANY
R
SL TU

PART,SHALL
67

FU REFERENCE DRAWINGS
#9 0 3 1 D E T A I L
) 41 41
T
O BS # 18 # 3 DWG. CONTROL FOR J.O. 12-18000-0008 CE-464735
SL (
RA-185092
O LL -06 L # NOT TO SCALE
C L T
WE RE
E SH 001 DWG LEGEND ELECTRICAL GENERAL NOTES CA-527971
W L O
S TU
15 23 FU POWER & CONTROL CABLE LAYOUT CA-445994
1 2 3
CATHODIC PROTECTION ONE LINE DIAG (ICCP) RA-185087
E 11
13 14 WELLHEAD TUR 4 CATHODIC PROTECTION BLOCK DIAGRAM RA-185095
# 1

N
FU L

I
# CATHODIC PROTECTION LAYOUT MEZZ DECK RA-185092-001
EL T
W O
SL

FULL,OR
28 CABLE & CONDUIT SCHEDULE (ELEC)
D E T A I L CD-446034
GROUNDING DETAIL-STANDARDIZED CA-527956
SCALE NTS
1
CATHODIC PROTECTION SYSTEM - ENCLOSURE RA-185090
ASSEMBLY DETAILD OF NAGATIVE JUNCTION BOX

N
I ON
REPRODUCTI
REMOVABLE WELLHEAD ACCESS SEE CONDUIT ROUTING
WELLHEAD DECK PLATFORM DIAGRAM THIS DWG KEY PLAN
FOR CONDUIT FITTINGS
U
T
AND SUPPORTS G M
R
29 (NOTE 5) I
D
15 23 25
30°

SAUDIARAMCO.NO
PLATFORM
NORTH

3 PREVAILING WIND
(2 PLACES)
PC-0591 WELL # 412 WELL # 412
C-0612
PC-0592 WELL # 414 WELL # 414 NEGATIVE
C-0613
PC-0604 WIRELINE POLE WIRELINE POLE
SPLITTER BOX
C-0608
JB-011, JB-012 & JB-043
PC-0593 WELL # 416
28 C-0614 WELL # 416
PC-0595 WELL # 419 WELL # 419
C-0616
WELL # 418
PC-0594
C-0615 WELL # 418
WELLHEAD
B A
PC-0597 WELL # 411 (FUTURE) WELL # 411 (FUTURE)
C-0618

OF
ACCESS
PC-0596 WELL # 410 (OBS) WELL # 410 (OBS)
C-0617 AREA
PC-0598 WELL # 413 (FUTURE) WELL # 413 (FUTURE)
22 C-0619

PROPERTY
PC-0599 WELL # 415 (FUTURE) C-0620 WELL # 415 (FUTURE)
PC-0600 WELL # 417 C-0621 WELL # 417
2
27
WELL CASING
FOR WELL CONDUCTOR A MEZZANINE
BONDING SEE DETAIL-G21 DRILL HOLE TO MATCH
19 31 DECK

SOLE
ON DWG CA-527956 SH 004 THRU ANGLE. SIZE FOR
MAIN DECK (NOTE 3) FLANGE BOLT 1

THE
GATE VALVE FLANGE

ARE
5
FY)

N
VERI

HEREI
SCALE
25

CONDUCTOR
51

GUIDE
26
ELD

NED
9
FI

SCALE: N T S
(

CONTAI
2" GATE VALVE
FLANGE
REVISION VALIDATION

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

DRILLING DECK FRAMING

ON
05 12-18000-0008-001

NFORMATI
CHAMFER DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
WELL CONDUCTOR AS REQ'D
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
09

REV.NO. DATE REVISION DESCRIPTION

25 64

I
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

22mm (‡")

THE
89 JOB ORDER/EWO NO.
ELEVATION FLANGE BOLT
12-18000-0008
THIS REVISION IS NOT TO BE USED FOR
CONSTRUCTION UNTIL CERTIFIED AND DATED
(FIELD VERIFY)
SAUDI ARABIAN OIL COMPANY

AND
2 D E T A I L
RA-185092
NOT TO SCALE
ELEVATION 1"C CATHODIC PROTECTION
DRAWING TYPE

SH 001
CAT

NG
A S E C T I O N WELLHEAD CONNECTION

DRAWI
(TYPICAL 10 PLACES)
3 D E T A I L SCALE NTS
- ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF 410/419
SCALE NTS NUMBERS ARE PRECEDED

(20 PLACES) (20 PLACES)

BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185091 001 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:
CATHODIC PROTECTION EQUIPMENT

1. ALL MATERIALS AND FABRICATION SHALL BE IN

EQUIPMENT DECK LOCATION QUANTITY ACCORDANCE WITH COMPANY SPECIFICATIONS.

RECTIFIER TRANSFORMER MAIN DECK 03 NOS. 2. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER
TO LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
ANODE JUNCTION BOX MAIN DECK 03 NOS.

NEGATIVE SPLITTER BOX MEZZANINE DECK 03 NOS.

OF
U
T
G M
R
I
D

CONSENT
29.25°

PLATFORM
NORTH

PREVAILING WIND

TTEN
WRI
THE
THOUT
B A

WI
LEGEND

N 100000
PC-0584

NG
DOWN TO
PC-0585

DRAWI
REC-001, REC-002 & CABLE GOING UP
PC-0586
REC-003
PC-0587
@ MAIN DECK VIA
PC-0977 CABLE GOING DOWN
ELEC CABLE TRAY
PC-0978

S
THI
1200 21400 14500

FROM
RA-185090
SH 001
CONNECTION TO
JACKET LEG
COLUMN 2A

NED
SB-001 00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
NEGATIVE
JB-202

JB-204

JB-206

JB-208

JB-210
FROM JB-012
SPLITTER 00A 03/10/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

OBTAI
NAV-AID LANTERN PC-0994
BOXES 00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
LG-001 C-0995
INTERNAL DSND CHKD APPR
DATE DESCRIPTION
REVISION BY BY BY

MPP REVISION CONTROL

BE
UP DN
C-0607 C-0610 NATIONAL PETROLIUM CONSTRUCTION COMPANY
JB-011 AFD AFD

PART,SHALL
PC-0584 PC-0586
XFR(T) -008 XFR(T) XFR(T) -010 XFR(T)
C-0609 C-0611 -008 -010
REFERENCE DRAWINGS
4000

-108 -110
PC-0585 PC-0587 DWG CONTROL
DWG CONTROLFOR
FORJ.O.
J.O. 12-18000-0008 CE-464735
JB-012 WELL#418 SLOT#8 WELL#419 SLOT#10 ELEC GEN NOTES, LEGEND & ABBREVIATION CA-527971
C-0984
ALH-00668 00B
JB-043 PC-0977 CATHODIC PROTECTION ONE LINE DIAGRAM (ICCP) RA-185087
/GJB-066
C-0985 CATHODIC PROTECTION BLOCK DIAGRAM RA-185095
PC-0592
PC-0978 CABLE & CONDUIT SCHEDULE (ELEC) CD-446034
C-0613

N
2

I
CATHODIC PROTECTION NEGATIVE SPLITTER BOX 11, 12, 13. RA-185090

FULL,OR
CATHODIC PROTECTION - WELLHEAD CONNECTION RA-185091
PC-0591
PC-0604
C-0612 AFD AFD
C-0608
SLOT 4 XFR(T) -004 XFR(T) XFR(T) -006 XFR(T)
DECK

PC-0594 -004 -006

WELL#412 WELL -104 -106
SLOT 2 C-0615
SLOPE

#414 MDP-002/
WELL#414 SLOT#4 WELL#416 SLOT#6 XFR(T)-302

N
PC-0593

I
100

SLOT 8 C-0614

L)

ON
1:

ACCESS
WELL KEY MAP

HANDRAI

REPRODUCTI
SLOT 6 #418
2 WELL PC-0595
U
#416 T
RA-185091 C-0616 G M
R
RIG SH 001 | PLATFORM WELL SLOT 10
I
D
XFR(T) XFR(T) XFR(T) XFR(T)
10700

#410
APPROACH WELL -107 AFD -007 -102 AFD -002 29.25°

18700

REMOVABLE
SLOT 9 WIRELINE POLE #419 -007 -002
PC-0596
PLATFORM
C-0617 NORTH
PC-0597 WELL#417 SLOT#7 WELL#412 SLOT#2

SAUDIARAMCO.NO
C-0618 PREVAILING WIND
DECK

PC-0600

(
WELL
WELL C-0621
#411
SLOPE

WELL WELL WELL#413 (FUTURE) WELL#415 (FUTURE)

SLOT 1 #413 #417 MDP-001/ B A
#415
100

(FUTURE) SLOT 3 SLOT 7 XFR(T)-301

SLOT 5
(FUTURE) XFR(T) XFR(T) XFR(T) XFR(T)
1:

(FUTURE)
-103 AFD -003 -105 AFD -005
PC-0599 -003 -005
PC-0598 C-0620
C-0619 3909
SLOT#3 SLOT#5
2

OF
1

CP-009A
LP-002

LC-007

LC-006

CP-009
WELLHEAD MEZZANINE

PROPERTY
ACCESS DECK
WINDSOCK
AREA
PC-0980
WELL#411 (FUTURE) WELL#410 (OBS)
4000

C-0987
1
JB-201

JB-203

JB-209
JB-205

JB-207

CONNECTION TO
JACKET LEG XFR(T) XFR(T) XFR(T) XFR(T)
COLUMN 1B UP DN -101 AFD -001 -109 AFD -009

SOLE
FROM JB-012 UP -001 -009

SLOT#1 SLOT#9

THE
VSD SKID WITH 520KVA
PHASE SHIFT TRANSFORMER, SCALE

ARE
520KVA ADJUSTABLE
FREQUENCY DRIVE & 520KVA
STEP UP TRANSFORMER

N
HEREI
TYP-10 LOCATIONS
WELLHEAD ACCESS AREA MEZZANINE DECK 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0

WELLHEAD ACCESS AREA METERS

NED
SCALE: 1 :75
EL(+) 15000 HP TOS
MEZZANINE DECK

CONTAI
EL(+) 16500 HP TOS
REVISION VALIDATION

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION LAYOUT CAT

NG
WELLHEAD ACCESS AREA AND MEZ DECK

DRAWI
ALL INSTRUMENT AND
EQUIPMENT TAG NUMBERS
ZULF 410/419
ARE PRECEDED BY
PLATFORM PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185092 001 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:
CATHODIC PROTECTION EQUIPMENT

1. ALL MATERIALS AND FABRICATION SHALL BE IN

EQUIPMENT DECK LOCATION QUANTITY ACCORDANCE WITH COMPANY SPECIFICATIONS.

RECTIFIER TRANSFORMER MAIN DECK 03 NOS. 2. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER
TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
ANODE JUNCTION BOX MAIN DECK 03 NOS.
U
T 3. ANODE CABLE INSTALLATION AND TERMINATION IS
G M
R NEGATIVE SPLITTER BOX MEZZANINE DECK 03 NOS.

OF
I
D BY SUBMARINE CABLE CONTRACTOR.

29.25°

CONSENT
PLATFORM
NORTH

PREVAILING WIND

TTEN
WRI
B A

THE
00A

N 100000

THOUT
WI
REVISION CLOUD OMITTED FOR CLARITY.

21400 8500

NG
DRAWI
LEGEND

CABLE GOING UP

S
THI
CABLE GOING DOWN
IC-0212

IC-0213

FROM
IC-0832

480v AC POWER PANEL

JB-015A
ANALOG/DIGITAL

JB-017A
JACKET

WR-002
PP-002 & PP-004

NED
PP-008
MB-003
JUNCTION BOX LEG COLUMN 2A

MB-002

MB-001
JB-013
JB-015 & JB-017

OBTAI
PC-0990

00A 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

DRAIN SLOPE DRAIN SLOPE DRAIN SLOPE
00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

CB-011
INTERNAL DSND CHKD APPR

BE
DATE DESCRIPTION
UP TO REVISION BY BY BY
JB-020
MEZZ DK MPP REVISION CONTROL

PART,SHALL
WARNING NATIONAL PETROLIUM CONSTRUCTION COMPANY
4000

SIGN BOARD
BC-

SB-
006
CP-004B 006 CB-013 REFERENCE DRAWINGS
COM
TEL PC-0975
-001 DWG CONTROL FOR J.O. 12-18000-0008 CE-464735

SCL-002
RTU-001

BC-
DIVERTER VALVE AREA

005
-001 PC-0977
SB-010 ELEC GEN NOTES, LEGEND & ABBREVIATION CA-527971

CB-012

REC-003
PC-0978
PPE

I
CATHODIC PROTECTION ONE LINE DIAGRAM (ICCP) RA-185087

C-0832
PC-0981

SB-
005
BOX-1
2

N
CATHODIC PROTECTION BLOCK DIAGRAM RA-185095

I
CB-014 PC-0982
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034

FULL,OR
SB- BC-
008 CATHODIC PROTECTION SYSTEM - ENCLOSURE
008 RA-185089
ASSEMBLY DETAILD OF ANODE JUNCTION BOX

REC-001 PC-0008 PC-0582

WELL WELL WELL WELL PC-0583
#412 #414 #416 #418 CB- SG-302

N
IC-0212

I
SLOT#2 SLOT#6 PC-0584
SLOT#4 SLOT#8 007 SPACE FOR SWITCHGEAR
CP-
DECK

PC-0585

ON
001 SLOPS PUMP KEY MAP
SLOPE

PSV PIPING

REPRODUCTI
WELL U
T
M
100

WELL WIRELINE IC-0213 G

#419 BC- R
#410 VALVE I
D
10700

POLE SLOT#10
DECK1:

| PLATFORM SLOT#9 LAYDOWN 010

REC-002 PC-0586 29.25°
AREA

SCL-001
2500x2000 PC-0587
PLATFORM
SLOPE

PC-0013
PC-0588
NORTH

SG-001
BC-
007
PC-0589
ZV
100

MOV

SAUDIARAMCO.NO
PREVAILING WIND
0020 PP-007
0022
1:

PPE
WELL WELL BOX-3
WELL WELL
#417 B A
CP-004A

#411 #413 #415

SLOT#3 SLOT#3 SLOT#5 SLOT#7 CP-005
MOV-0022-JB
PORTABLE EYE
WASH STATION-1 PC-0601
JB-036 SPACE FOR PIPING
JACKET LEG
COLUMN 1A
JB-010
E 100000 2

OF
1 SB- CS-
HIPS-01
CB-013 007 012
JB-009 JB-008

PROPERTY
C-0988 MAIN DECK

BOX-2
PPE
DIVERTER VALVE AREA PC-0981

CB-
014
PC-0590
4000

C-0989
JACKET LEG PC-0982 1
COLUMN 1B

SB-
009
BC- C-0991
DOWN TO 009 HFU-301
UP TO PC-0990
CELLAR DK (FUTURE)

SOLE
MEZZ DK
PC-0992
NOTE 3
PC-0993
JB-014A
JB-016A

THE
DRAIN SLOPE DRAIN SLOPE DRAIN SLOPE
GN
NG SI

ALH-0069/
C-0605 SCALE
C-0631
BOARD

GJB-069
480v AC POWER PANEL PC-0582

ARE
PC-0588
PP-003 & PP-005 C-0606
WARNI

C-0632
PC-0583
PC-0589
ANODE JUNCTION BOX

N
HEREI
C-0603 JB-009 ,JB-010 & JB-008
C-0602
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
PC-0590
PC-0601
1
METERS
PC-0627 RA-185089
NOTE 3 PC-0629

NED
PC-0628 NOTE 3 SH 001
1 :75
PC-0630 SCALE:

CONTAI
REVISION VALIDATION

THIS REVISION NO. 00A IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

MAIN DECK REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001
EL(+) 12000 TOS

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00A 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION LAYOUT CAT

NG
MAIN DECK

DRAWI
ALL INSTRUMENT AND
EQUIPMENT TAG NUMBERS
ZULF 410/419
ARE PRECEDED BY
PLATFORM PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185092 002 00A
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:
1. ALL MATERIALS AND FABRICATION SHALL BE IN
ACCORDANCE WITH COMPANY SPECIFICATIONS.

2. ALL ELEVATIONS ARE IN MILLIMETERS AND REFER

U TO THE LOWEST ASTRONOMICAL TIDE (LAT) DATUM.

T
G M
R 3. ANODE CABLE INSTALLATION AND TERMINATION IS
I
D
BY SUBMARINE CABLE CONTRACTOR.

OF
29.25°

PLATFORM

CONSENT
NORTH

PREVAILING WIND

TTEN
WRI
THE
UP TO
B A
MEZZ DECK
VIA CABLE TRAY

THOUT
PC-0584
LEGEND
PC-0585

WI
PC-0586 IC-0212 TO REC-001
PC-0587 IC-0213 TO REC-002 CABLE GOING UP
PC-0977

NG
IC-1314 TO REC-003
PC-0978
JACKET LEG

DRAWI
UP TO CABLE GOING DOWN
CONNECTION 2A
IC-1314 TO MB-001
PC-0994 RTU-001
C-0995 VIA MB-001
PC-0975 FROM SR-001 (PP-001)
PC-0981

S
THI
PC-0982 TO JB-008

PC-0977
TO JB-043 00B

FROM
PC-0978

G8
CA-527956

NED
SH 002

OBTAI
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00A 03/10/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

2 INTERNAL DSND CHKD APPR
JACKET LEG DATE DESCRIPTION

BE
REVISION BY BY BY
IC-0212 TO MB-001
CONNECTION 2A MPP REVISION CONTROL

PART,SHALL
PC-0990
PC-0008 FROM SR-001 (PP-001) NATIONAL PETROLIUM CONSTRUCTION COMPANY
PC-0582

PC-0583 TO JB-009 REFERENCE DRAWINGS

DWG CONTROL FOR J.O. 12-19000-0014 CE-464735

PC-0584
TO JB-011 ELEC GEN NOTES, LEGEND & ABBREVIATION CA-527971
PC-0585
TO REC-001 PC-0008 CATHODIC PROTECTION ONE LINE DIAGRAM (ICCP) RA-185087
TO REC-002 PC-0013
CATHODIC PROTECTION BLOCK DIAGRAM RA-185095

N
TO REC-003 PC-0975

I
JACKET LEG
CABLE & CONDUIT SCHEDULE (ELEC) CD-446034
CONNECTION 1B UP TO

FULL,OR
GROUNDING DETAIL-STANDARDIZED CA-527956
PC-0980 SR-001
C-0987 (PP-001)
IC-0213 TO MB-001

PC-0013 FROM SR-001 (PP-001)

N
I
PC-0588

PC-0589 TO JB-010
KEY MAP

ON
REPRODUCTI
PC-0586
TO JB-012 U
PC-0587 T
G M
R
I
D
29.25°

PC-0627 PLATFORM
PC-0628 DOWN TO NORTH
PC-0629 ANODE SLEDS A,B,C,D,
1 PREVAILING WIND

SAUDIARAMCO.NO
JACKET LEG PC-0630 E & F (RESP)
CONNECTION 1A PC-0992
(NOTE 3)
PC-0601 PC-0993
JACKET LEG
CONNECTION 1B B A
PC-0590

OF
MAIN DECK

PROPERTY
C-0611 C-0988
C-0605 PC-0588 PC-0981
PC-0582 TO REC-002 TO REC-003 1
C-0610 C-0989
TO REC-001
C-1003 PC-0589 PC-0982
PC-0583
TO JACKET C-0602 C-0991 TO JACKET

SOLE
TO JACKET C-0603 LEG 1A PC-0601 PC-0990 LEG 2A
LEG 1B PC-0590
PC-0629 PC-0992
PC-0627
NOTE 3 NOTE 3
PC-0630 PC-0993
NOTE 3

THE
PC-0628
SCALE
UP TO UP TO

ARE
UP TO JB-010 JB-008
JB-009

N
HEREI
BELOW MAIN DECK PLAN 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0

METERS

NED
SCALE: 1 :75

CONTAI
REVISION VALIDATION

THIS REVISION NO. 00B IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00B 08/24/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION LAYOUT CAT

NG
BELOW MAIN DECK

DRAWI
ALL INSTRUMENT AND
EQUIPMENT TAG NUMBERS
ZULF 410/419
ARE PRECEDED BY
PLATFORM PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185092 003 00B
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:

1. ALL MATERIALS AND FABRICATION ARE IN

ACCORDANCE WITH COMPANY SPECIFICATIONS.

2.ANODE CABLE ARMOUR SHALL BE CONNECTED

TO ANODE JB GROUND BUS BAR AND THEN
IT SHALL BE CONNECTED TO PLATFORM DECK
NEAR SPECIFIED LEG.

OF
3.FOLLOWING CABLES/CONNECTIONS SHALL BE

CONSENT
FROM 480V, 3PH, 60Hz
INSTALLED AT OFFSHORE
POWER PANEL PP-001 FROM 480V, 3PH, 60Hz FROM 480V, 3PH, 60Hz (a) PYRAMID ANODE SLED ASSEEMBLY AND ITS
FOR CONTINUATION SEE DISTRIBUTION POWER PANEL PP-001 POWER PANEL PP-001 ANODE CABLE TO ANODE JB
ONE LINE DIAGRAM DWG CA-445987 SH 001 FOR CONTINUATION SEE DISTRIBUTION FOR CONTINUATION SEE DISTRIBUTION (b) NEGATIVE CABLE CONNECTION TO WELL CASINGS
ONE LINE DIAGRAM DWG CA-445987 SH 001 ONE LINE DIAGRAM DWG CA-445987 SH 001 AND JACKET LEGS.

TTEN
4. CABLE IS COILED, INSULATED & PROTECTED
FROM WEATHER & DAMAGE AT LAST CONDUIT
FITTING BEFORE WELLHEAD AREA.

WRI
THE
THOUT
PC-0008

PC-0975
PC-0013

WI NG
DRAWI
S
THI
LEGEND

FROM
PC-XXXX POWER CABLE TAG NUMBER

CB(A)-009 CB(A)-010 CB(A)-017

NED
CC-XXXX CATHODIC CABLE TAG NUMBER

OBTAI
RECTIFIER RECTIFIER RECTIFIER
REC-001 REC-002 REC-003 C-XXXX CONDUIT TAG NUMBER

CONDUIT

BE
PART,SHALL
N
I
FULL,OR
PC-0582

PC-0584

PC-0585

PC-0588

PC-0589
PC-0586

PC-0587

PC-0977

PC-0978

PC-0981

PC-0982
PC-0583

N
I ON
REPRODUCTI
SAUDIARAMCO.NO
PC-0582

PC-0583

PC-0981

PC-0982
PC-0584

PC-0585
C-0607

C-0609

PC-0977

PC-0978
C-0605

C-0606

C-0988

C-0989
C-0984

C-0985
PC-0586

PC-0587

PC-0588

PC-0589
C-0631

C-0632
C-0610

C-0611

00A 08/24/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

INTERNAL DSND CHKD APPR

DATE DESCRIPTION
REVISION BY BY BY

MPP REVISION CONTROL

C-0626 C-0986

PC-0979 NATIONAL PETROLIUM CONSTRUCTION COMPANY

PC-0581

OF
REFERENCE DRAWINGS
ANODE ANODE ANODE
NEGATIVE NEGATIVE NEGATIVE

PROPERTY
JUNCTION JUNCTION JUNCTION DWG CONTROL
DWG CONTROLFOR
FORJ.O.
J.O. 12-18000-0008 CE-464735
SPLITTER SPLITTER SPLITTER
BOX BOX BOX ELEC ONE LINE DIAGRAM-480V POWER DISTRIBUTION CA-445987
BOX BOX BOX
JB-009 JB-010 JB-008
JB-011 JB-012 JB-043 POWER & CONTROL CABLE LAYOUT CA-445994
ELEC ONE LINE DIAGRAM-CATHODIC PROTECTION RA-185087
00A CATHODIC PROTECTION LAYOUT-MEZZ DECK RA-185092-001
CATHODIC PROTECTION LAYOUT-MAIN DECK RA-185092-002

SOLE
INST BLOCK DIAGRAM CA-445721
CABLE & CONDUIT SCHEDULE (POWER) CD-446034

CABLE & CONDUIT SCHEDULE (INST) CD-527677

THE
PANEL SCHEDULE RC-446025
SUBSEA TIE-IN PLATFORM DA-890604

ARE N
HEREI
PC-0591

PC-0592

PC-0604
C-0608
PC-0590

PC-0627

PC-0628

PC-0593

PC-0980

PC-0994

PC-0629

PC-0630

PC-0601

PC-0992

PC-0993

PC-0990
C-0603

C-0987

C-0602

C-0991
PC-0595

PC-0594

PC-0597

PC-0596

PC-0598

PC-0599

PC-0600
C-0620

C-0621
C-0612

C-0613

C-0614

C-0616

C-0615

C-0618

C-0617

C-0619
C-0995

NED
SCALE: NTS

CONTAI
REVISION VALIDATION
#412

#2

#414
#4

#418
#8
WELL #419
NE
POLE

#416
#6

SLOT #10

SLOT #1

#413

#415

#417
SLOT #3
FUTURE

FUTURE

FUTURE
NOTE 4

SLOT #5

#7
#411

#9
#410
RELI

THIS REVISION NO. 00A IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

NOTE

NOTE
SLOT

SLOT

SLOT
SLOT

SLOT
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
JACKET JACKET

SLOT
JACKET
ANODE
WELL

WELL

WELL

ANODE ANODE ANODE ANODE

WELL

ANODE

ON
WI

WELL

WELL

WELL
PLATFORM PLATFORM LEG LEG
WELL

LEG

WELL
12-18000-0008-001
SLED SLED SLED SLED SLED SLED

NFORMATI
COLUMN DECK DECK COLUMN COLUMN
"B" "C" "D" "E" "F" DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
"A" 1A 2A
1B (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

(NOTE 2) (NOTE 2) (NOTE 2)

CONNECTION CONNECTION
TO TO REV.NO. DATE REVISION DESCRIPTION

SUBMARINE CABLE

I
SUBMARINE CABLE JACKET JACKET SUBMARINE CABLE 00A 08/24/21 RE-ISSUED FOR CONSTRUCTION

WORKSCOPE WELL CASINGS/CONDUCTORS LEG LEG WORKSCOPE WELL CASINGS/CONDUCTORS WORKSCOPE

THE
JOB ORDER/EWO NO.
(NEGATIVE) COLUMN 1B COLUMN 2A THIS REVISION IS NOT TO BE USED FOR
(NEGATIVE) 12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

CATHODIC PROTECTION CAT

NG
BLOCK DIAGRAM ICCP SYSTEM

DRAWI
ALL EQUIP, INSTRUMENT ZULF 410/419
AND PIPING TAG
NUMBERS ARE PRECEDED
BY PREFIX NO.
ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185095 001 00A
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
BILL OF MATERIAL NOTES:

DWG 1. ALL DIMENSIONS ARE IN MILLIMETERS.

STOCK NUMBER IU DESCRIPTION QTY
CODE
2. ALL ELEVATIONS ARE IN METERS AND REFER
TO THE LOWEST ASTRONOMICAL TIDE (LAT)
U
T 01 XX XXX XXX-XX FT GROUNDING CABLE; 450/750V 2/0 AWG (1/C X 70 SQ MM)
G M 68.00
R 3. ALL MATERIALS AND FABRICATION SHALL BE IN
I
D CU/PVC INSULATION; BUILDING GREEN
ACCORDANCE WITH COMPANY SPECIFICATIONS.
29.25°

OF
PLATFORM 4. MATERIALS SHALL BE SHIPPED LOOSE AND

CONSENT
NORTH 00A INSTALLED OFFSHORE.

PREVAILING WIND
5. APPROXIMATELY ONE METER OF #2/0 AWG CABLE
REQUIRED FOR EACH BONDING CONNECTION.

B A

TTEN
WRI
THE
THOUT
TOS.EL+3600)

WI
N

NG
DRAI
DRUM

DRAWI
N 100000
BONDING LEGEND

D-00X1 (
BATTERY

BELOW)
NG
BOAT LANDING

HOLDI
ACCESS LADDER

S
#2/0 BONDING CONDUCTOR

THI
(
UPPER BOAT LANDING
EL(+) 3894 TOG

FROM
BONDING CONNECTION MADE WITH
CADWELD

NED
OBTAI
G2
00A 03/10/21 RE-ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
RA-185097
00 04/02/21 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA
DN SHT-001
INTERNAL DSND CHKD APPR

BE
DATE DESCRIPTION
REVISION BY BY BY
(1 PLACE)
REVISION CONTROL

PART,SHALL
(Refer Note-5)

00A NATIONAL PETROLEUM CONSTRUCTION COMPANY

UP

1850
REFERENCE DRAWINGS
DWG CONTROL FOR J.O.12-18000-0008 CE-464735

BONDING DETAILS RA-185097

2

1000 1000
G1A

N
I
8-5/8" J-TUBE ICCP
RA-185097

FULL,OR
C
L 16" RISER
(7 PLACES) WELL WELL GIA
00A
WELL #416 #418
(Refer Note-5) RA-185097
WELL #414 SLOT#6 SLOT#8
SLOT#4 SHT-001
#412

3350

N
I
SLOT#2
(1 PLACE)

ON
(Refer Note-5) KEY PLAN

REPRODUCTI
G3 U
T
WELL G M
10700

R
RIG RA-185097 C
L PLATFORM #410 WELL C
L PLATFORM I
D
#419

DN
APPROACH SLOT#9 29.25°
SLOT#10 #2/0 AWG RUN

DN
(TYP.) PLATFORM
(30 PLACES)
NORTH

3700
(Refer Note-5) WELL
#417 PREVAILING WIND

SAUDIARAMCO.NO
SLOT#7
WELL WELL
G1B WELL
#413 #415
#411
SLOT#3 SLOT#5 B A
RA-185097 SLOT#1 12-3/4" J-TUBE POWER/COMMS

1000 650
8-5/8" J-TUBE-ICCP
(3 PLACES)
PRIMARY LOCATION
(Refer Note-5)
E 100000
1
2

OF
UP

3350

PROPERTY
1
DN

SOLE
DATUM
POINT
REMOVABLE HANDRAIL
(NOTE-8)

THE
BOAT LANDING UPPER BOAT LANDING LOWER BOAT LANDING
ACCESS LADDER EL(+) 3894 TOG EL(+) 2894 TOG SCALE

ARE N
HEREI
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0

METERS

NED
SCALE: 1:75

CONTAI
CATHODIC PROTECTION BONDING PLAN & DETAILS - BOAT LANDING REVISION VALIDATION

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

SCALE 1 :50M REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

REV.NO. DATE REVISION DESCRIPTION

I
00 03/10/21 RE-ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

BONDING PLAN CATHODIC PROTECTION CAT

NG
JACKET WATER DEPTH

DRAWI
ALL EQUIP, INSTRUMENT
AND PIPING TAG
ZULF-410/419
NUMBERS ARE PRECEDED
BY PREFIX NO. ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185096 001 00
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05

 SAUDIARAMCO.
NOTES:

1. ALL MATERIALS AND FABRICATION SHALL BE IN

ACCORDANCE WITH THE COMPANY SPECIFICATIONS.

2. FOR METHOD OF INSTALLATION AND FORMATION OF

THERMITE WELD, REFER TO MANUFACTURER'S
BILL OFMATERIAL BILL OFMATERIAL
INSTRUCTIONS.

OF
DWG DWG
STOCKNUMBER IU DESCRIPTION QTY STOCKNUMBER IU DESCRIPTION QTY
CODE CODE
3. CADWELD OPERATION EQUIPMENT FOR BONDING

CONSENT
02 BX POWDER: WELD METAL 10 CART SEICO "P90" OR EQUIVALENT. 0.10 02 BX POWDER: WELD METAL 10 CART SEICO "P90" OR EQUIVALENT. 0.10 CONNECTIONS, SUCH AS DESIGNATED CLAMPS AND
MOLDS, WILL SERVE APPROXIMATELY 50 WELDS.
MOLD: TAP; CABLE-12-28" PIPE 70MM2 (2/0 AWG) HORZ; CADWELD 05 EA CLAMP: MOLD; CHANGE HANDLE; SEICO "CH-M" OR EQUIVALENT. 1.00
03 EA 1.00
SEICO "CH-TH-70" OR EQUIVALENT POWDER P-90.
MOLD: TAP; CABLE-STEEL 2/0 AWG (70 MM2) VERT DOWN;
07 EA 1.00 4. ALL THERMITE WELDED CONNECTIONS SHALL BE
MOLD: TAP; CABLE 6-10" PIPE 70MM2 (2/0 AWG) HORZ; CADWELD ERICO "CH-VI-70" OR EQUIVALENT POWDER P-90.
04 EA 1.00 COATED USING APCS-19A COATING SYSTEM
SEICO "CH-TH-70" OR EQUIVALENT POWDER P-90.
08 PC PLATE:CS 6MM THK X 1250MM X 2500MM A36M (3.125 SM/PC) 0.004 IMMEDIATELY AFTER WELDING.

TTEN
05 EA CLAMP: MOLD; CHANGE HANDLE; SEICO "HC-M" OR EQUIVALENT. 1.00

06 PC PLATE:CS 6MM THK X 1250MM X 2500MM A36M (3.125 SM/PC) 0.004 5. MATERIALS SHOWN ARE FOR ONE ASSEMBLY ONLY.

WRI
FOR TOTAL QUANTITY SEE PLANS & DETAILS.

6. PAINTING WILL BE DONE AS PER SAES-H-004.

THE
7. BOM FOR BONDING CONDUCTOR IS INDICATED

THOUT
IN DWG. No. RA-185096

WI
FOR DETAIL-G1A

NG
03

DRAWI
04 FOR DETAIL-G1B
02 05

S
THI
#2/0 AWG RUN

PIPE

FROMNED
BONDING LEGEND

OBTAI
06

BE
DOUBLER PL 6x100x100

PART,SHALL
TYP
5
#2/0 BONDING CONDUCTOR

G1A D E T A I L PIPE
RA-185096
BONDING CONNECTION MADE WITH
SH 001 CADWELD

TYP

N
CABLE TAP TO HORIZONTAL 5

I
FULL,OR
02 05 07
G1B D E T A I L
RA-185096
SH 001

N
I
PIPE SURFACE

ON
00 12/10/20 ISSUED FOR CONSTRUCTION HH/SH SUK/PMA WKA

REPRODUCTI
INTERNAL DSND CHKD APPR
08 DATE DESCRIPTION
REVISION BY BY BY

REVISION CONTROL
DOUBLER PL 6x100x100 #2/0 AWG RUN

NATIONAL PETROLEUM CONSTRUCTION COMPANY

REFERENCE DRAWINGS
BILL OFMATERIAL

SAUDIARAMCO.NO
DWG CONTROL FOR J.O.12-18000-0008 CE-464735
DWG
STOCKNUMBER IU DESCRIPTION QTY BONDING PLAN CATHODIC PROTECTION RA-185096
CODE

02 BX POWDER: WELD METAL 10 CART SEICO "P90" OR EQUIVALENT. 0.10

05 EA CLAMP: MOLD; CHANGE HANDLE; SEICO "CH-M" OR EQUIVALENT. 1.00

MOLD: TAP; CABLE TO STEEL 12"-30" PIPE 70MM2 VERT

06 EA 1.00
DOWN; SEICO "CH-TH-70" OR EQUIVALENT POWDER P-90.
PIPE
07 PC PLATE:CS 6MM THK X 1250MM X 2500MM A36M (3.125 SM/PC) 0.004

OF
PROPERTY
SOLE
THE
02 05 06

ARE
PIPE G3 D E T A I L SCALE
RA-185096

N
HEREI
SH 001
0 1.0 2.0 3.0 4.0 5.0

CABLE TAP FOR 30" & 32" CONDUCTOR PILE METERS

NED
1 : 50M
SCALE:

CONTAI
07 REVISION VALIDATION

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

DOUBLER PL 6x100x100
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
12-18000-0008-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

#2/0 AWG RUN

TYP
5
REV.NO. DATE REVISION DESCRIPTION

I
00 12/10/20 ISSUED FOR CONSTRUCTION

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
12-18000-0008 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

G2 D E T A I L BONDING DETAILS AT EL (+)5.500M CAT

NG
RA-185096
JACKET WATER DEPTH 22.3M

DRAWI
SH 001

ZULF 410/419
DOWN CABLE TAP TO VERTICAL PIPE SURFACE
ZULUF SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
5B 408 X RA-185097 001 00
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-01