Scribd
Upload
24 views

CypherCrescent PE Internship Test

Internship

Uploaded by

Abdullahi Tahiru Sarajo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

CypherCrescent PE Internship Test

Internship

Uploaded by

Abdullahi Tahiru Sarajo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TEST EXERCISES

Using a computer aided approach, solve the problems below.


Instruction: You may use any programming tool/Language: Excel VBA, Python, MATLAB, C# etc.

Exercise One (From L.P. Dake Exercise 9.2)


A wedge-shaped reservoir is suspected of having a fair strong natural water drive. The geometry of
the reservoir-aquifer system is shown below. The reservoir was at bubble point at the initial condition
with no gas cap (m=0). Develop a computer program that will Perform history matching of the
reservoir using the production and PVT data given below.

Hint: Use Klins et al paper: “A Polynomial approach to the Van Everdingen - Hurst dimensionless
variables for water encroachment”

The PVT data are given in the table below:

Copyright © 2021 CypherCrescent Ltd. 1


Copyright © 2021 CypherCrescent Ltd. 1
Exercise Two
The equation given by Hall and Yarborough (Ikoku, 1984) is given below:
2
0.06125𝑃𝑝𝑟 𝑡𝑒 −1.2(1−𝑡)
𝑧=
𝑦
Where t = 1 / Tpr, and y = the reduced density which is obtained as the solution of the equation:

2 𝑦 + 𝑦2 + 𝑦3 − 𝑦4
F(y) = −0.06125𝑃𝑝𝑟 𝑡𝑒 −1.2(1−𝑡) + − (14.76𝑡 − 9.76𝑡 2 + 4.58𝑡 3 )𝑦 2
(1 − 𝑦)3
+ (90.7𝑡 − 242.2𝑡 2 + 42.4𝑡 3 )𝑦 (2.18+2.82𝑡)

Ppr is defined as the Pseudo Reduced Pressure; while Tpr is defined as the Pseudo Reduced
Temperature.

Ppc = 677 + 15.0 γg - 37.5 γg2; and Tpc = 168 + 325 γg - 12.5 γg2, where γg is the specific gravity.

For Natural gas with specific gravity of 0.7, at a pressure of 2000 psia and a temperature of 180 deg
Fahrenheit, use the equations above to calculate the z-factor, considering the presence of the non-
hydrocarbon components: N2 = 0.5%, CO2 = 2% and H2S = 0.1%.

REFERENCES

1. L.P Dake “Fundamentals of Reservoir Engineering” pp. 310 – 314, 1978.


2. Chi. U. Ikoku “Natural Gas Production Engineering” Wiley pp. 46 – 47, 1984.

Copyright © 2021 CypherCrescent Ltd. 1

You might also like