Division 00 - Procurement and Contracting Requirements: Comprehensive Library
Division 00 - Procurement and Contracting Requirements: Comprehensive Library
Comprehensive Library
DIVISION 03 - CONCRETE
030100 Maintenance of Concrete Patching and repair of damaged or deteriorated
concrete, using cementitious and epoxy repair
materials.
031000 Concrete Forming and Accessories Form materials, water stops and accessories, as
required to form cast-in-place concrete.
DIVISION 04 - MASONRY
U 040100 Maintenance of Masonry Restoration of masonry surfaces of brick, stone, clay tile,
terra cotta, and block by water, steam, sand blasting, or
chemical cleaning.
U 040513 Masonry Mortaring Mortar for masonry Work, specified by property method
or by proportion method.
U 040516 Masonry Grouting Grouting for masonry Work, specified by property
method or by proportion method.
U 042000 Unit Masonry Single-wythe, veneer, cavity, and reinforced, load or non
-load bearing masonry units, CMU, brick, clay tile, and
surface parging.
U 042300 Glass Unit Masonry Glass block unit masonry, plain and decorative designs,
reinforcement, joints, and accessories.
U 042500 Unit Masonry Panels Shop fabricated masonry panels of face brick veneer
structurally attached to steel framing.
U 042600 Single-Wythe Unit Masonry Single wythe masonry construction using concrete
masonry units, decorative and pre-faced units, face
brick, clay tile units, and surface parging.
U 042613 Masonry Veneer Masonry exterior or interior veneer walls using
decorative and pre-faced masonry units.
U 042723 Cavity Wall Unit Masonry Double-wythe cavity wall construction, load- and non-
load-bearing, including related accessories.
U 042900 Engineered Unit Masonry Steel reinforced, structural, and load-bearing masonry
with grout- or concrete-filled cores.
DIVISION 05 - METALS
051200 Structural Steel Framing Structural steel items including framing, anchor rods,
base plates, structural frame accessories, and shop
finishing.
052100 Steel Joist Framing Open-web joists, long-span joists, deep long-span joists,
joist girders, and anchorage and bearing plates.
053113 Steel Floor Decking Shop-formed structural metal floor deck, cellular or non
-cellular, and plain or ribbed.
053123 Steel Roof Decking Structural metal roof deck; non-cellular, acoustic or non-
acoustic types.
054000 Cold-Formed Metal Framing Axially loaded steel studs, slotted channels, joists, purlin
framing, and connections, including bracing, fasteners
and accessories.
055000 Metal Fabrications Shop fabricated metal items of steel and aluminum.
055013 Metal Service Platforms Steel service platforms consisting of grating, ladders
and stairs, handrails, and railings used for accessing and
servicing equipment.
055100 Metal Stairs Shop fabricated steel stairs with concrete filled pan,
checkered plate, or open grating; pre-engineered or
engineer designed, preassembled stair towers;
including integral handrails and balusters.
055200 Metal Railings Pipe or tube railing system; aluminum or steel
materials; custom fabricated or proprietary design.
055300 Metal Gratings Metal and FRP bar gratings and floor plates for
pedestrian or light vehicle loads.
057000 Decorative Metal Basic metal materials and fabrication for specially
designed and fabricated metal products by Project.
057113 Fabricated Metal Spiral Stairs Production or custom-manufactured spiral stairs, with
or without vertical center columns.
DIVISION 08 - OPENINGS
081163 Metal Screen and Storm Doors and Frames Modular sized, packaged, and glazed aluminum storm
doors, frames, and operating hardware intended to be
attached to wood-frame door openings.
081213.13 Standard Hollow Metal Frames Standard shop fabricated steel frames, fire rated and
non-rated types.
081213.53 Custom Hollow Metal Frames Custom shop fabricated steel frames, fire rated and non
-rated types.
DIVISION 09 - FINISHES
092116 Gypsum Board Assemblies Metal-channel and stud framing, with paper- or vinyl-
faced gypsum board; for walls, ceilings, soffits, furred
space enclosures, and shaftwall systems; includes taped
-joint or batten-joint closures.
092213 Metal Furring Metal furring usually associated with gypsum or cement
plaster finish.
092216 Non-Structural Metal Framing Lightweight, non-axial load bearing metal stud framing
and bracing.
092236 Lath Framing and lathing, usually associated with gypsum or
cement plaster finish.
092300 Gypsum Plastering Gypsum plaster for interior finish; two coat application
over solid surfaces, or a three coat application over
metal lath.
092400 Cement Plastering Portland cement plaster for an interior or exterior
finish; two coat application over solid surfaces; or a
three coat application over metal lath. Sometimes
referred to as stucco.
092613 Gypsum Veneer Plastering Interior gypsum veneer plaster in one or two coats
applied to various substrates and over electric radiant
heating cable.
DIVISION 10 - SPECIALTIES
101100 Visual Display Units Chalkboards, marker boards, and tack boards with
aluminum frames, wood frames, or frameless types,
and accessories.
101400 Signage Plastic plaque-style door and wall signs with engraved,
raised, individually mounted, silk-screened, or sand-
blasted characters.
102113 Toilet Compartments Baked enamel and plastic laminate toilet compartments
and accessories; floor, wall, or ceiling mounted.
102113.16 Plastic-Laminate-Clad Toilet Compartments Shop-fabricated plastic laminate clad toilet
compartments and accessories; floor, wall, and ceiling
mounted.
102113.19 Plastic Toilet Compartments Shop-fabricated solid plastic toilet compartments and
accessories; floor, wall, and ceiling mounted.
102123 Cubicle Curtains and Tracks Curtains and overhead track used for privacy screening
in medical facilities.
102213 Wire Mesh Partitions Woven or expanded metal wire mesh partitions; steel or
aluminum frame; hinged doors or access panel;
operating hardware, and accessories.
102219 Demountable Partitions Demountable interior gypsum board partitions,
reusable components, modular sized framing, framed
openings; concealed or exposed jointing methods.
U 102223.23 Movable Panel Systems Operable panel partitions of various types, floor to
ceiling acoustic type.
102233 Accordion Folding Partitions Accordion folding partitions, acoustic or non-acoustic
type, with vinyl coated fabric finish; manual and electric
operation, with overhead track and hardware.
102600 Wall and Door Protection Manufactured wall and corner guard devices for the
protection of interior wall surfaces and corners.
102800 Toilet, Bath, and Laundry Accessories This section is intended to cover any type of toilet, bath,
shower, washroom and utility room accessories.
103100 Manufactured Fireplaces Manufactured steel cabinet fireplaces with chimney,
optional doors or face screen, and accessories.
104400 Fire Protection Specialties Fire extinguishers, cabinets, mounting hardware, and
fire blankets.
105113 Metal Lockers Metal wardrobe lockers, shop fabricated, with locker
benches and accessories.
105513 Central Mail Delivery Boxes Multiple mail boxes often used in office, apartment, and
multiple tenant buildings.
105591 Mail Chutes Vertical mail chutes for multi-story buildings, including
receiving box at chute bottom.
107313 Awnings Fixed awnings of special or custom shape, constructed
of a plastic or synthetic fabric covering over a formed-
pipe or tube-framing structure.
107500 Flagpoles Metal and glass-fiber flagpoles, primed for Site painting
or prefinished, ground or building mounted, and with
manual or electric operation.
DIVISION 11 - EQUIPMENT
111200 Parking Control Equipment Parking gate arm and activator units, devices for ticket
dispensing, vehicle detection activators, and card, coin,
or remote controlled access.
DIVISION 12 - FURNISHINGS
122113.13 Metal Horizontal Louver Blinds Interior horizontal slat window blinds of steel or
aluminum, with lifting cord and cord or wand for tilting
slats.
122113.23 Wood Horizontal Louver Blinds Interior horizontal slat window blinds of wood, with
lifting cord and cord or wand for tilting slats.
122216 Drapery Track and Accessories Drapery track with manual or electric operation,
including metal channel, single or double track,
supports, and nylon carriers.
123100 Manufactured Metal Casework Shop fabricated metal casework, usually modular
dimension, including a common range of counter top
types and laboratory service fittings.
123530 Residential Casework Shop-fabricated and modular-size, residential-quality
casework, of proprietary manufacture.
124813 Entrance Floor Mats and Frames Surface or recessed entry floor mats, carpet, vinyl link,
rubber link, or cocoa types; with or without custom
design inlay.
DIVISION 22 - PLUMBING
220513 Common Motor Requirements for Plumbing Equipment Electric motors and their accessories normally supplied
as part of equipment assemblies.
220516 Expansion Fittings and Loops for Plumbing Piping Fittings and practices used to compensate for thermal
expansion and other movements in plumbing piping
systems.
220523 General-Duty Valves for Plumbing Piping Ball, butterfly, check, gate, and globe valves used in
plumbing piping systems.
220529 Hangers and Supports for Plumbing Piping and Equipment Supports, hangers, anchors, sleeves and sealing of work
to adjacent construction for plumbing systems
220548 Vibration and Seismic Controls for Plumbing Piping and Inertia bases and vibration isolation equipment used for
Equipment vibration and seismic control of plumbing equipment.
220553 Identification for Plumbing Piping and Equipment Nameplates, labeling, and identification methods for
plumbing equipment and components.
DIVISION 26 - ELECTRICAL
260505 Selective Demolition for Electrical Basic methods for demolition and repair of disrupted
existing electrical work.
260513 Medium-Voltage Cables Medium voltage cable and accessories, for systems
rated above 600 volts to 35,000 volts.
DIVISION 27 - COMMUNICATIONS
270513.43 Cable Services Master antenna (MATV), satellite master antenna
(SMATV), television service entrance, and premises
wiring for cable television or community antenna
television (CATV).
270526 Grounding and Bonding for Communications Systems Wire, connections, and other related grounding
components for grounding associated with
communication systems.
DIVISION 31 - EARTHWORK
310513 Soils for Earthwork Soil and subsoil materials intended to be referenced by
other Sections, generally for fill and grading purposes.
310516 Aggregates for Earthwork Coarse- and fine-aggregate materials intended to be
referenced by other Sections, generally for fill and
grading purposes.
310519.13 Geotextiles for Earthwork Turf reinforcement mats (woven geotextiles) and
nonwoven geotextiles materials.
310813 Pile Load Testing Pile load-testing requirements intended to supplement
piling Sections where testing is a project requirement.
DIVISION 33 - UTILITIES
330110.58 Disinfection of Water Utility Piping Systems Disinfection of domestic water services associated with
site services and utility supply systems.
DIVISION 34 - TRANSPORTATION
347113 Vehicle Barriers Formed steel guard rail on steel or timber posts for
vehicular traffic control.
DIVISION 43 - PROCESS GAS AND LIQUID HANDLING, PURIFICATION AND STORAGE EQUIPMENT
430510 Common Work Results for Gas Handling Equipment Basic materials and methods for fans, blowers, and
compressors.
430520 Common Work Results for Liquid Handling Equipment Basic materials and methods for process pumps.
430540 Common Work Results for Gas and Liquid Storage Common materials and construction requirements for
gas and liquid storage tanks.
430548 Vibration and Seismic Controls for Process Gas and Liquid Vibration isolation and seismic control equipment for
Handling Equipment pumps, fans, blowers, compressors, and other gas- and
liquid-handling equipment.
430553 Identification for Process Gas and Liquid Handling Equipment Labeling and identification methods for process fans,
blowers, compressors, pumps, and accessories,
including nameplates, tags, stencils, labels, and lockout
devices.
431111 Direct Drive Single Stage Centrifugal Blowers Centrifugal blowers and drives.
431119 Centrifugal Fans Centrifugal fans and drives.
431123 Axial Blowers Axial blowers, drives, and accessories.
431126 Axial Fans Axial fans, drives, and accessories.
431133 Rotary Lobe Blowers Rotary lobe blowers and drives.
U 431211 Centrifugal Compressors Low-pressure centrifugal air compressors and
components for compressed-air systems in plant or
process applications, including pipe and pipe fittings,
valves, piping accessories, aftercoolers, air dryers, air
receivers, and pressure-reducing stations.