Scribd
Upload
39 views

Proj of Line - Question Bank

Uploaded by

10d
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Proj of Line - Question Bank

Uploaded by

10d
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Question Bank: Projection of Straight Line

1. A straight line AB of length 70 mm has its end A on the HP and 30 mm in front of VP. Line is
parallel to VP and inclined at 450 to the HP. Draw three views of the line AB and find distance of
end B from HP and length of the plan.
2. A line PQ of length 65 mm is situated in VP. End P and Q of line are 25 mm and 55 mm
respectively above the HP. Draw three views of the line. Find the inclination of the line with HP
and its plan length.
3. Distance between end projectors P and Q of a line AB of length 70 mm is 55 mm. End P of the
line is 10 mm above the HP and 25 mm infront of the VP. Line is parallel to the VP. Draw three
views of the line. Find inclination of the line with HP and its plan length.
4. End A of a line AB is on the HP. Line is inclined to HP at 400. Its plan length is 50 mm. Draw
three views of the line AB when it is situated on the VP. Find true length.
5. A line AB of length 65 mm has it’s end A 20 mm infront of the VP. Line is parallel to HP and 20
mm above it. Draw the three Views of the line when elevation length is 55 mm. Find the
inclination of the line with VP and distances of end B from VP.
6. A line AB of length 60 mm is situated on the HP. The end A and B of the line are 20 mm an 50
mm respectively infront of the VP. Draw three views of line. Find the inclination of the line with
VP and its elevation length.
7. The distance between end projectors P and Q of the line PQ of length 75 mm is 50 mm. End P of
line is 10 mm infront of VP and 30 mm above HP. Line is parallel to the HP. Draw three views
of the line. Find inclination of the line with VP and its elevation length.
8. The distance between end projectors P and Q of line PQ is 65 mm. End P of the line is 15 mm
infront of thje VP and 35 mm above HP. End Q of the line is 55 mm infront of the VP and 30
mm above HP. Draw three views of the line. Find inclination of line with VP and its true length.
9. End A of the line AB is on the VP. Line is inclined to VP at 500 and its elevation length is 35
mm. Draw three views of the line AB, when it is situated on the HP. Find true length.
10. End A and B of a line AB is 15 mm and 50 mm respectively infront of the VP. Elevation length
of line is 60 mm and its parallel to the XY line and 15 mm above it. Draw three views of the line
and find its true length and inclination with VP.

Line inclined to both plane (Oblique Line)


11. A line AB, 65 mm long is inclined at an angle of 400 to the HP and 350 to the VP. Its end point A
is on the HP and 15 mm infront of VP. Draw the projection of line AB, assuming it to be in the
first quadrant. Also locate its Traces.(May 2013 Phase I)
12. A line PQ, 70 mm long is inclined at an angle of 350 to VP. Its end point P is 15 mm above HP
and 15 mm infront of the VP. The plan length of line is 45 mm. Draw the projection of line PQ.
Also locate its Traces.
13. A line AB, 65 mm long is inclined at an angle of 350 to the VP. Its end point A is 5 mm above
HP and 25 mm infront of VP. The end B is 35 mm above HP. Draw the projection of line AB.
Also locate its Traces.
14. A line AB, 65 mm long is inclined at an angle of 350 to the HP. Its end point A is 5 mm above
HP and 25 mm infront of VP. The elevation length of line is 45 mm. Draw the projection of
line AB. Also locate its Traces.
15. A line AB, 65 mm long is inclined at an angle of 350 to the HP. Its end point A is 5 mm above
HP and on the VP. The end B is 45 mm infront of VP. Draw the projection of line AB. Also
locate its Traces.
16. A line AB, 70 mm long has its end A is 10 mm above HP and 15 mm infront of VP. The
elevation and plan length of line are same and is of 50 mm. Draw the projection of line AB.
Also locate its Traces.
17. A line AB, 70 mm long has its end A, 20 mm above HP and 15 mm infront of VP. The end B is
40 mm above HP and 55 mm infront of VP. Draw the projection of line AB. Also locate its
Traces.
18. A pont A of line AB is 10 mm above HP and is in VP. The FV and TV of line AB makes an
angle of 400 and 350 with XY respectively. Draw the projections, if the end projector distance
between the end point of the line is 60 mm. Fine the true length and true inclinations made by the
line. Also locate its Traces. (May 2013)
19. A point P of the line PQ is in HP and 15 mm infront of VP. The TV of line PQ makes 400 with
XY, while its plan measures 100 mm. Draw the projections if the true length of line is 112 mm.
Find the true inclinations made by the line and locate the traces. (May 2013)
20. A point P of 75 mm long line is 25 mm above HP, while its end point Q is 20 mm infront of VP.
Its plan Makes 460with XY. The projector distance between the end points of line is 50 mm.
Draw the projections of a line and find the inclination made by it with HP and VP. Also locate
the traces of line. (Dec. 2012)
21. A line AB, 80 mm long has its end point A on the HP. Line makes an angle of 300 with the HP
and 450 with the VP. End B of the line is on the VP. Draw the projection of the line. Locate
traces of the line.

You might also like