PRODUCT DATA SHEET
SikaControl® WT-200 P (IN)
WATER RESISTING AND CRYSTALLINE WATERPROOFING CONCRETE ADMIXTURE
DESCRIPTION CHARACTERISTICS / ADVANTAGES
SikaControl® WT-200 P (IN) is a combined water resist- SikaControl® WT-200 P (IN) reduces ability of concrete
ing and crystalline water proofing admixture used to to conduct water flow. It has unique active chemicals,
reduce permeability of concrete and has the ability to which react with the moisture within the concrete and
heal the cracks. with various products of the cement hydration pro-
cess. As a result of this reaction insoluble crystalline
USES compounds are created throughout the entire capil-
lary system. Over time crystalline formations reduce
SikaControl® WT-200 P (IN) has been specifically for- the size of the capillary pores until they are completely
mulated to produce high quality waterproof concrete. blocked and water flow is stopped.
SikaControl® WT-200 P (IN) can be used in any below/ SikaControl® WT-200 P (IN) in water tight concrete ap-
in / above ground watertight structures such as: plication can result in:
▪ Tunnels ▪ Uniform water proofing throughout the entire con-
▪ Subway Stations crete volume
▪ Bridges ▪ No leakage due to surface damage
▪ Water tanks ▪ Reduced water penetration under pressure
▪ Dams & Reservoirs ▪ Enhancement of self-healing properties of concrete
▪ Water treatment plants
▪ Basements APPROVALS / STANDARDS
▪ Foundations
ACI 212
PRODUCT INFORMATION
Chemical Base Minerals and additives
Packaging 20kg and 25kg bag
Appearance / Colour Off white to grey powder
Shelf Life 12 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage Conditions Store in dry conditions at temperatures between +10°C and +40°C. Protect
from direct sunlight and frost.
Bulk Density ~ 0.8 g/cc at 25°C
SYSTEM INFORMATION
Compatibility SikaControl® WT-200 P (IN) is compatible with most admixtures manufac-
tured to IS & ASTM Specifications, most cements & pozzolans.
Product Data Sheet
SikaControl® WT-200 P (IN)
April 2020, Version 01.01
021403011000000160
1/2
APPLICATION INFORMATION
Recommended Dosage 0.8% to 2% by weight of cementitious.
Actual dosage to be finalised on the basis of site trials and requirements.
APPLICATION INSTRUCTIONS ECOLOGY, HEALTH AND SAFETY
DISPENSING For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall
Add the correct amount of SikaControl® WT-200 P (IN) refer to the most recent Material Safety Data Sheet
during mixing process at the batch plant. containing physical, ecological, toxicological and other
safety-related data.
BASIS OF PRODUCT DATA
LEGAL NOTES
All technical data stated in this Product Data Sheet are
based on laboratory tests. Actual measured data may The information, and, in particular, the recommenda-
vary due to circumstances beyond our control. tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
LOCAL RESTRICTIONS rent knowledge and experience of the products when
properly stored, handled and applied under normal
Please note that as a result of specific local regulations conditions in accordance with Sika's recommenda-
the declared data for this product may vary from tions. In practice, the differences in materials, sub-
country to country. Please consult the local Product strates and actual site conditions are such that no war-
Data Sheet for the exact product data. ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which
will be supplied on request.
Sika India Pvt. Ltd.
620, Diamond Harbour Road
Commercial Complex II
Kolkata - 700 034
Tel : +91 33 24472448
Fax : +91 33 23978688
Mail :
[email protected] SikaControlWT-200PIN-en-IN-(04-2020)-1-1.pdf
Product Data Sheet
SikaControl® WT-200 P (IN)
April 2020, Version 01.01
021403011000000160
2/2
