DF2400 FACTS2 ™

C-SAM® Automated Scanning

Another Step Forward in Automated Scanning!

Ensures Defect-Free Production without
Sacrificing Throughput
The FACTS2 model DF2400 delivers even faster automation
inspection with maximized flexibility. Equipped with our
industry preferred Sonolytics™ software platform, the
DF2400 is the ideal solution for production environments.

Improved Flexibility and Throughput!

2x to 7x Faster Throughput
Dual optimized scanning zones.
Simultaneous scanning and drying.
Factory Friendly
SECS-II/GEM E30 and SMEMA.
Water quality management system.
Fully automated and also doubles
as an analytical tool

Features
I ncreased throughput: • Thru-Scan™, reflection and non-immersion
• Inertially balanced dual linear motor scanners for scan modes.
vibration free high speed scanning.
Compatible with the Windows 7 Sonolytics
• Simultaneously scans two (2) modules or JEDEC trays.
software platform featuring:
• Continuously scans while parts are being dried in
• Visual PolyGate™ technology with Multi-Gate™
an isolated drying area.
and Probing-Gate™ - capable of single and
• Programmable customized scanning of specific areas,
multi-focus imaging.
thus maximizing throughput.
• Automated image analysis for accept / reject.
Flexible configuration:
• In-line operation for high volume
production environments.
• Operates as a stand-alone analytical tool.

www.nordson.com/TestInspect
DF2400 FACTS2 ™ C-SAM® Automated Scanning

FACTS2 Features System Optional For more information,

speak with your Nordson
• Sonolytics™ for Windows 7® • Dual Ultra High Speed Scanning • SECII/GEM E30 for total factory representative or contact
with multi-language operation: mechanism is inertially balanced automation requirements. your Nordson regional office
English, Japanese and linear motor scanners provide • Vacuum Hold-down for small parts
Traditional Chinese. the fastest image acquisition in scan region. Ref. U.S. Patent Nordson Test & Inspection
• Automatic Data Analysis times and inhibits vibration; while 6,357,136 Europe, SEA, Africa
Package automatically simultaneously scanning two [email protected]
• Vacuum Hold-down for drying.
determines results “Accept/ (2) trays with a precision of ±0.5
Reject” based on measured microns. Ref. U.S. Patent 7,584,664 • Thru-Scan™ (Through-transmission
Nordson Test & Inspection
criteria. imaging) displays material Americas
• High Frequency Pulser/Receivers
continuity and delamination or
• Two Scanners with Region of with 500MHz bandwidth delivers [email protected]
voids. Compatible with Vacuum
Interest Scanning more than the power needed for transducers
Hold-down.
doubles the throughput of our up to 230MHz. Nordson Test & Inspection
previous model. • STaR™ (Simultaneous Thru-Scan China
• Super High Resolution of 286
and Reflection) generates TDI and [email protected]
• Capable of scanning a standard Megapixels (16K) acoustic data
Thru-Scan images in one pass.
JEDEC Tray and Auer Boat points provide the most accurate
compatible configuration. imaging resolution. • SEMI F47 UPS for orderly shut- Nordson Test & Inspection
down. Japan
• PolyGate™ simultaneously • 95dB Gain selectable in 0.5dB steps
offers needed gain for the best • Heated Air during drying ensuring [email protected]
captures up to 100 depths of
interest (gates) with independent image quality. completely dry components.
• Remote Water Temperature Nordson Test & Inspection
gains, color maps and waveform • AIPD™ (Acoustic Impedance
Singapore
analysis. Polarity Detector) Simultaneously Monitor and Control System
maintains the ideal scanning [email protected]
• TDI™ (Time Domain Imaging) Displays both Polarity (i.e., Phase)
includes A-Scan, B-Scan, C-Scan, and Amplitude Data. Ref. U.S. conditions.
Patent 4,866,986 Nordson Test & Inspection
Bulk Scan, Multi-Scan, Surface • In-line DI Water Treatment reduces Taiwan
Scan, Interface Scan, Bulk Scan • Probing-Gate™ automatically water usage by recirculating DI
[email protected]
and Loss of Back Echo (LoBE). configures the parameters for while maintaining and monitoring
• Turbo Speed improves scan imaging various depths of interest conductivity level.
Nordson Test & Inspection
rates 2.5X faster at the smallest sequentially, downward, upward • In-line Water Heater decreases Korea
resolution settings. and expanding. the attenuation loss of high [email protected]
• AutoScan™ automates • Pixel Pitch™ allows the operator frequencies.
alignment, gain, focus and field to select the desired scan area size • In-line Degasification eliminates
of view for multiple locations. and data point spacing, thereby gases from the water.
Also integrates with data analysis determining the C-SAM image
• Water Filtration eliminates
tools. resolution.
particulates from the water.
• Precision Focusing adds focus • Movement Map™ offers an
• UV Light assists in the reduction of
precision 10X for applications interactive graphical representation
bacterial growth in water
that require critical focus. of the scan area.
• Transducers manufactured by
• Dual WaterFall™ is a non- • Color Maps for image enhancement
SONOSCAN available from 50 –
immersion technique that using pre-defined
400MHz.
minimizes components exposure or user defined color mappings.
• Heat Exchanger assists in
time to water. • C-SAM Interactive™ provides user
maintaining a consistent water
• Dual Multi Stage Drying Unit application support - an intuitive
temperature.
removes DI water from inspected interaction-based learning tool.
components. Dries two trays or • Image files store scan parameters Facility Requirements
modules simultaneously. in every saved image and can be
used to recall previous settings. • Main Unit Dimensions: L 97.4” x W
• SMEMA-9851 integrated interface
37.0” x H 88.8” (L 2.48m x W 0.94m
for loading and unloading of • Image conversion to GIF, PNG, JPG,
x H 2.26m)
trays. TIF and BMP supported.
• 220-240VAC, Single Phase, 50/60
• Multiple Waveform analysis • Clean room ready with ESD
Hz.
modes: Safe surfaces.
• Main Unit – 15 amps.
• Amplitude measures • Safety enclosed cabinetry with
viewing ports and manufactured • Additional amperage is required
peak-to-peak signal
per CE and SEMI S2 and S8 for vacuum hold-down & heating
and polarity.
Standards and clean room ready. options. Max 80 amps.
• Profile analyzes distance
from front surface to • 32 cfm @ 80 psi of Clean/Dry
interface of interest. Compressed Air.
• Time Difference • DI Water @ 20 psi max inlet for ~6
evaluates distance gallons (~23 liters) of Deionized
between two interfaces. Water for Recirculation Tank.
• Integration Mode™
• Approximately 1,100 lbs. 500Kg.
allows diminished
signals to stand out.

www.nordson.com/TestInspect
DS-FACTS2-271022
US and Foreign Patents Pending.