 IT Questions Bank  IOS Command List  Ebooks  IP Calculators »

 Donations

Search the site 

 Home  CCNA » Security » CyberOps »

 IT Questions Bank  IOS Command List CCNA » CCNA Security v2.0 »

Cybersecurity » Networking Essentials IP Subnet Calculators » Donation

Contact

CCNA 1 v7 Modules 1 – 3: Basic CCNA v7.0 Exam

Network Connectivity and Answers
Communications Exam Answers CCNA 1 - v7 CCNA 2 - v7
 Dec 18, 2019 |  Last Updated: Sep 17, 2024 |
CCNA 3 - v7
 CCNA v7 Course #1 |  129 Comments

 Share  Tweet  Share  Pin it

System Test Exam

Modules 1 - 3: Basic
Network Connectivity
and Communications
Exam Answers

Modules 4 - 7:

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 1 dari 66
 Ethernet Concepts
Exam Answers

Modules 8 - 10:
Communicating
Between Networks
How to find: Press “Ctrl + F” in the browser Exam Answers
and fill in whatever wording is in the question to
Modules 11 - 13: IP
find that question/answer. If the question is not Addressing Exam
here, find it in Questions Bank. Answers

Modules 14 - 15:
Network Application
NOTE: If you have the new question on this
Communications
test, please comment Question and Multiple- Exam Answers
Choice list in form below this article. We will
Modules 16 - 17:
update answers for you in the shortest time.
Building and Securing
Thank you! We truly value your contribution
a Small Network
to the website.
Exam Answers

[PT Skills] Practice

PT Skills Assessment
(PTSA)

[Final Skills] ITN

Final Skills Exam
(PTSA)

Delaga Biru Green Hero RedDoorz ITNv7 Practice Final

Convention Hot… Darajat Hotel Syariah near…
Exam
295.848,00 153.654,00
842.296,00
CCNA 1 v7 Course
FINAL Exam
Selengkapnya Selengkapnya Selengkapnya
Answers
Promo Liburan Dalam Negeri
Traveloka

Checkpoint Exam: Basic Network

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 2 dari 66
 Connectivity and Communications Related Posts
Exam Answers 4.6.5 Packet Tracer – Connect
a Wired and Wireless LAN
(Answers)
Modules 1 – 3 of the CCNA1 –
Introduction to Networks v7.0 (ITN) CCNA 1 v7 Modules 8 – 10:
Communicating Between
1. During a routine inspection, a technician Networks Exam Answers
discovered that software that was installed on a
computer was secretly collecting data about 13.3.1 Packet Tracer – Use
ICMP to Test and Correct
websites that were visited by users of the Network Connectivity
computer. Which type of threat is affecting this (Instructions Answer)
computer?
7.2.4.9 Packet Tracer –
DoS attack Configuring IPv6 Addressing
(Answers)
identity theft
spyware 13.3.2 Packet Tracer – Use
zero-day attack Ping and Traceroute to Test
Network Connectivity –
Physical Mode Answers
Explanation: Spyware is software that is
8.5.7 Check Your
installed on a network device and that collects Understanding – Introduction to
information. Routing Answers

12.3.8 Check Your

2. Which term refers to a network that provides Understanding – IPv6 Address
Types Answers
secure access to the corporate offices by
suppliers, customers and collaborators? 17.8.5 Module Quiz – Build a
Small Network (Answers)
Internet
intranet 8.4.5 Check Your
Understanding – How a Host
extranet
Routes Answers
extendednet
8.6.2 Module Quiz – Network
Layer (Answers)
Explanation: The term Internet refers to the
worldwide collection of connected networks.
Intranet refers to a private connection of LANs
Recent Comments
IT Administrator on CCNA 2

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 3 dari 66
 and WANS that belong to an organization and is v7.0 Final Exam Answers Full
– Switching, Routing and
designed to be accessible to the members of the
Wireless Essentials
organization, employees, or others with
authorization. Extranets provide secure and safe luis on 1.0.5 Packet Tracer –
Logical and Physical Mode
access to suppliers, customers, and
Exploration.pka
collaborators. Extendednet is not a type of
network. Mian on CCNA 2 v7.0 Final
Exam Answers Full –
Switching, Routing and
3. A large corporation has modified its network to Wireless Essentials
allow users to access network resources from Anonymous on NetEss Final
their personal laptops and smart phones. Which Packet Tracer Skills
networking trend does this describe? Assessment (PTSA) Answers

cloud computing Felix on An organization is

assigned an IPv6 address
online collaboration block of 2001:db8:0:ca00::/56.
bring your own device How many subnets can be
video conferencing created without using bits in
the interface ID space?

Explanation: BYOD allows end users to use

personal tools to access the corporate network.
Allowing this trend can have major impacts on a
network, such as security and compatibility with
corporate software and devices.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 4 dari 66
 Delaga Biru Green Hero RedDoorz
Convention Hot… Darajat Hotel Syariah near…
295.848,00 153.654,00
842.296,00

Belanja sekarang Belanja sekarang Belanja sekarang

Promo Liburan Dalam Negeri

Traveloka

4. What is an ISP?

It is a standards body that develops cabling and

wiring standards for networking.
It is a protocol that establishes how computers
within a local network communicate.
It is an organization that enables individuals
and businesses to connect to the Internet.
It is a networking device that combines the
functionality of several different networking
devices in one.

Explanation: An ISP, or Internet Service

Provider, is an organization that provides access
to the Internet for businesses and individuals.

5. Match the requirements of a reliable network

Close
with the supporting network architecture. (Not all
options areDelaga
used.)Biru Convention Hotel -
Co!age & Restaurant

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 5 dari 66
 6. An employee at a branch office is creating a
quote for a customer. In order to do this, the
employee needs to access confidential pricing
information from internal servers at the Head
Office. What type of network would the employee
access?

an intranet
the Internet
an extranet
a local area network

Explanation: Intranet is a term used to refer to a

private connection of LANs and WANs that
belongs to an organization. An intranet is
designed to be accessible only by the
organization’s members, employees, or others
with authorization.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 6 dari 66
 7. Which statement describes the use of
powerline networking technology?

Delaga Biru Green Hero Puncak Village

Convention Hot… Darajat Hotel Hotel & Kampu…
295.848,00 231.491,00
842.296,00

Selengkapnya Selengkapnya Selengkapnya

Promo Liburan Dalam Negeri

Traveloka

New “smart” electrical cabling is used to extend

an existing home LAN.
A home LAN is installed without the use of
physical cabling.
A device connects to an existing home LAN
using an adapter and an existing electrical
outlet.
Wireless access points use powerline adapters to
distribute data through the home LAN.

Explanation: Powerline networking adds the

ability to connect a device to the network using
an adapter wherever there is an electrical outlet.
The network uses existing electrical wiring to

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 7 dari 66
 send data. It is not a replacement for physical
cabling, but it can add functionality in places
where wireless access points cannot be used or
cannot reach devices.

8. A networking technician is working on the

wireless network at a medical clinic. The
technician accidentally sets up the wireless
network so that patients can see the medical
records data of other patients. Which of the four
network characteristics has been violated in this
situation?

fault tolerance
scalability
security
Quality of Service (QoS)
reliability

Explanation: Network security includes

protecting the confidentiality of data that is on the
network. In this case, because confidential data
has been made available to unauthorized users,
the security characteristic of the network has
failed.

9. Match each characteristic to its corresponding

Internet connectivity type. (Not all options are
used.)

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 8 dari 66
 ITN (Version 7.00) – Basic Network Connectivity and
Communications Exam 5

Explanation: DSL is an always-on, high

bandwidth connection that runs over telephone
lines. Cable uses the same coaxial cable that
carries television signals into the home to
provide Internet access. Dialup telephone is
much slower than either DSL or cable, but is the
least expensive option for home users because it
can use any telephone line and a simple modem.
Satellite requires a clear line of sight and is
affected by trees and other obstructions. None of
these typical home options use dedicated leased
lines such as T1/E1 and T3/E3.

10. What two criteria are used to help select a

network medium from various network media?
(Choose two.)

the types of data that need to be prioritized

the cost of the end devices utilized in the network

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 9 dari 66
 the distance the selected medium can
successfully carry a signal
the number of intermediate devices installed in
the network
the environment where the selected medium
is to be installed

Explanation: Criteria for choosing a network

medium are the distance the selected medium
can successfully carry a signal, the environment
in which the selected medium is to be installed,
the amount of data and the speed at which the
data must be transmitted, and the cost of the
medium and its installation.

11. What type of network traffic requires QoS?

email
on-line purchasing
video conferencing
wiki

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 10 dari 66
 Explanation: Video conferencing utilizes real-
time audio and video communications. Both of
these are time-sensitive and bandwidth-intensive
forms of communication that require quality of
service to be active on the network. QoS will
ensure an uninterrupted user experience.

12. A user is implementing security on a small

office network. Which two actions would provide
the minimum security requirements for this
network? (Choose two.)

implementing a firewall
installing a wireless network
installing antivirus software
implementing an intrusion detection system
adding a dedicated intrusion prevention device

Explanation: Technically complex security

measures such as intrusion prevention and
intrusion prevention systems are usually
associated with business networks rather than
home networks. Installing antivirus software,
antimalware software, and implementing a
firewall will usually be the minimum requirements
for home networks. Installing a home wireless
network will not improve network security, and
will require further security actions to be taken.

13. Passwords can be used to restrict access to

all or parts of the Cisco IOS. Select the modes
and interfaces that can be protected with
passwords. (Choose three.)

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 11 dari 66
 VTY interface
console interface
Ethernet interface
boot IOS mode
privileged EXEC mode
router configuration mode

Explanation: Access to the VTY and console

interfaces can be restricted using passwords.
Out-of-band management of the router can be
restricted in both user EXEC and privileged
EXEC modes.

14. Which interface allows remote management of

a Layer 2 switch?

the AUX interface

the console port interface
the switch virtual interface
the first Ethernet port interface

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 12 dari 66
 Explanation: In a Layer 2 switch, there is a
switch virtual interface (SVI) that provides a
means for remotely managing the device.

15. What function does pressing the Tab key have

when entering a command in IOS?

It aborts the current command and returns to

configuration mode.
It exits configuration mode and returns to user
EXEC mode.
It moves the cursor to the beginning of the next
line.
It completes the remainder of a partially typed
word in a command.

Explanation: Pressing the Tab key after a

command has been partially typed will cause the
IOS to complete the rest of the command.

16. While trying to solve a network issue, a

technician made multiple changes to the current
router configuration file. The changes did not
solve the problem and were not saved. What
action can the technician take to discard the
changes and work with the file in NVRAM?

Issue the reload command without saving the

running configuration.
Delete the vlan.dat file and reboot the device.
Close and reopen the terminal emulation
software.
Issue the copy startup-config running-config

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 13 dari 66
 command.

Explanation: The technician does not want to

make any mistakes trying to remove all the
changes that were done to the running
configuration file. The solution is to reboot the
router without saving the running configuration.
The copy startup-config running-config command
does not overwrite the running configuration file
with the configuration file stored in NVRAM, but
rather it just has an additive effect.

17. An administrator uses the Ctrl-Shift-6 key

combination on a switch after issuing the ping
command. What is the purpose of using these
keystrokes?

to restart the ping process

to interrupt the ping process
to exit to a different configuration mode
to allow the user to complete the command

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 14 dari 66
 Explanation: To interrupt an IOS process such
as ping or traceroute, a user enters the Ctrl-Shift-
6 key combination. Tab completes the remainder
of parameters or arguments within a command.
To exit from configuration mode to privileged
mode use the Ctrl-Z keystroke. CTRL-R will
redisplay the line just typed, thus making it easier
for the user to press Enter and reissue the ping
command.

18. Refer to the exhibit. A network administrator is

configuring access control to switch SW1. If the
administrator uses a console connection to
connect to the switch, which password is needed
to access user EXEC mode?

CCNA-1-v7-Modules-1-3-Basic Network
Connectivity and Communications Exam Answers
14

letmein
secretin
lineconin
linevtyin

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 15 dari 66
 Explanation: Telnet accesses a network device
through the virtual interface configured with the
line VTY command. The password configured
under this is required to access the user EXEC
mode. The password configured under the line
console 0 command is required to gain entry
through the console port, and the enable and
enable secret passwords are used to allow entry
into the privileged EXEC mode.

19. A technician configures a switch with these

commands:

SwitchA(config)# interface vlan 1

SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0
SwitchA(config-if)# no shutdown

What is the technician configuring?

Telnet access
SVI
password encryption
physical switchport access

Explanation: For a switch to have an IP

address, a switch virtual interface must be
configured. This allows the switch to be
managed remotely over the network.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 16 dari 66
 20. Which command or key combination allows a
user to return to the previous level in the
command hierarchy?

end
exit
Ctrl-Z
Ctrl-C

Explanation: End and CTRL-Z return the user to

the privileged EXEC mode. Ctrl-C ends a
command in process. The exit command returns
the user to the previous level.

21. What are two characteristics of RAM on a

Cisco device? (Choose two.)

RAM provides nonvolatile storage.

The configuration that is actively running on
the device is stored in RAM.
The contents of RAM are lost during a power
cycle.
RAM is a component in Cisco switches but not in
Cisco routers.
RAM is able to store multiple versions of IOS and
configuration files.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 17 dari 66
 Explanation: RAM stores data that is used by
the device to support network operations. The
running configuration is stored in RAM. This type
of memory is considered volatile memory
because data is lost during a power cycle. Flash
memory stores the IOS and delivers a copy of
the IOS into RAM when a device is powered on.
Flash memory is nonvolatile since it retains
stored contents during a loss of power.

22. Which two host names follow the guidelines

for naming conventions on Cisco IOS devices?
(Choose two.)

Branch2!
RM-3-Switch-2A4
Floor(15)
HO Floor 17
SwBranch799

Explanation: Some guidelines for naming

conventions are that names should:
Start with a letter
Contain no spaces
End with a letter or digit
Use only letters, digits, and dashes
Be less than 64 characters in length

23. How is SSH different from Telnet?

SSH makes connections over the network,

whereas Telnet is for out-of-band access.
SSH provides security to remote sessions by

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 18 dari 66
 encrypting messages and using user
authentication. Telnet is considered insecure
and sends messages in plaintext.
SSH requires the use of the PuTTY terminal
emulation program. Tera Term must be used to
connect to devices through the use of Telnet.
SSH must be configured over an active network
connection, whereas Telnet is used to connect to
a device from a console connection.

Explanation: SSH is the preferred protocol for

connecting to a device operating system over the
network because it is much more secure than
Telnet. Both SSH and Telnet are used to connect
to devices over the network, and so are both
used in-band. PuTTY and Terra Term can be
used to make both SSH and Telnet connections.

24. An administrator is configuring a switch

console port with a password. In what order will
the administrator travel through the IOS modes of

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 19 dari 66
 operation in order to reach the mode in which the
configuration commands will be entered? (Not all
options are used.)

Place the options in the following order:

first mode user EXEC mode

second mode privileged EXEC mode

third mode global configuration mode

final mode line configuration mode

Explanation: The configuration mode that the

administrator first encounters is user EXEC
mode. After the enable command is entered, the
next mode is privileged EXEC mode. From there,
the configure terminal command is entered to
move to global configuration mode. Finally, the
administrator enters the line console 0
command to enter the mode in which the
configuration will be entered.

25. What are three characteristics of an SVI?

(Choose three.)

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 20 dari 66
 It is designed as a security protocol to protect
switch ports.
It is not associated with any physical
interface on a switch.
It is a special interface that allows connectivity by
different types of media.
It is required to allow connectivity by any device
at any location.
It provides a means to remotely manage a
switch.
It is associated with VLAN1 by default.

Explanation: Switches have one or more switch

virtual interfaces (SVIs). SVIs are created in
software since there is no physical hardware
associated with them. Virtual interfaces provide a
means to remotely manage a switch over a
network that is using IP. Each switch comes with
one SVI appearing in the default configuration
“out-of-the-box.” The default SVI interface is
VLAN1.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 21 dari 66
 26. What command is used to verify the condition
of the switch interfaces, including the status of
the interfaces and a configured IP address?

ipconfig
ping
traceroute
show ip interface brief

Explanation: The show ip interface brief

command is used to display a brief synopsis of
the condition of the device interfaces. The
ipconfig command is used to verify TCP/IP
properties on a host. The ping command is used
to verify Layer 3 connectivity. The traceroute
command is used to trace the network path from
source to destination.

27. Match the description with the associated IOS

mode. (Not all options are used.)

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 22 dari 66
 28. Match the definitions to their respective CLI
hot keys and shortcuts. (Not all options are used.)

Explanation: The shortcuts with their functions

are as follows:
– Tab – Completes the remainder of a partially
typed command or keyword

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 23 dari 66
 – Space bar – displays the next screen
– ? – provides context-sensitive help
– Up Arrow – Allows user to scroll backward
through former commands
– Ctrl-C – cancels any command currently being
entered and returns directly to privileged EXEC
mode
– Ctrl-Shift-6 – Allows the user to interrupt an
IOS process such as ping or traceroute

29. In the show running-config command, which

part of the syntax is represented by running-
config ?

the command
a keyword
a variable
a prompt

Explanation: The first part of the syntax, show,

is the command, and the second part of the

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 24 dari 66
 syntax, running-config, is the keyword. The
keyword specifies what should be displayed as
the output of the show command.

30. After making configuration changes on a

Cisco switch, a network administrator issues a
copy running-config startup-config command.
What is the result of issuing this command?

The new configuration will be stored in flash

memory.
The new configuration will be loaded if the
switch is restarted.
The current IOS file will be replaced with the
newly configured file.
The configuration changes will be removed and
the original configuration will be restored.

Explanation: With the copy running-

config startup-config command, the
content of the current operating configuration
replaces the startup configuration file stored in
NVRAM. The configuration file saved in NVRAM
will be loaded when the device is restarted.

31. What command will prevent all unencrypted

passwords from displaying in plain text in a
configuration file?

(config)# enable password secret

(config)# enable secret Secret_Password
(config-line)# password secret
(config)# service password-encryption
(config)# enable secret Encrypted_Password

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 25 dari 66
 Explanation: To prevent all configured
passwords from appearing in plain text in
configuration files, an administrator can execute
the service password-encryption command. This
command encrypts all configured passwords in
the configuration file.

32. A network administrator enters the service

password-encryption command into the
configuration mode of a router. What does this
command accomplish?

This command encrypts passwords as they are

transmitted across serial WAN links.
This command prevents someone from
viewing the running configuration passwords.
This command enables a strong encryption
algorithm for the enable secret password
command.
This command automatically encrypts passwords
in configuration files that are currently stored in
NVRAM.
This command provides an exclusive encrypted
password for external service personnel who are
required to do router maintenance.

Explanation: The startup-config and running-

config files display most passwords in plaintext.
Use the service password-encryption global
config command to encrypt all plaintext
passwords in these files.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 26 dari 66
 33. What method can be used by two computers
to ensure that packets are not dropped because
too much data is being sent too quickly?

encapsulation
flow control
access method
response timeout

Explanation: In order for two computers to be

able to communicate effectively, there must be a
mechanism that allows both the source and
destination to set the timing of the transmission
and receipt of data. Flow control allows for this
by ensuring that data is not sent too fast for it to
be received properly.

34. Which statement accurately describes a

TCP/IP encapsulation process when a PC is
sending data to the network?

Data is sent from the internet layer to the network

access layer.
Packets are sent from the network access layer
to the transport layer.
Segments are sent from the transport layer to
the internet layer.
Frames are sent from the network access layer
to the internet layer.

Explanation: When the data is traveling from the

PC to the network, the transport layer sends
segments to the internet layer. The internet layer
sends packets to the network access layer,

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 27 dari 66
 which creates frames and then converts the
frames to bits. The bits are released to the
network media.

35. What three application layer protocols are part

of the TCP/IP protocol suite? (Choose three.)

ARP
DHCP
DNS
FTP
NAT
PPP

Explanation: DNS, DHCP, and FTP are all

application layer protocols in the TCP/IP protocol
suite. ARP and PPP are network access layer
protocols, and NAT is an internet layer protocol
in the TCP/IP protocol suite.

36. Match the description to the organization. (Not

all options are used.)

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 28 dari 66
 Explanation: The EIA is an international
standards and trade organization for electronics
organizations. It is best known for its standards
related to electrical wiring, connectors, and the
19-inch racks used to mount networking
equipment.

37. Which name is assigned to the transport layer

PDU?

bits
data
frame
packet
segment

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 29 dari 66
 Explanation: Application data is passed down
the protocol stack on its way to be transmitted
across the network media. During the process,
various protocols add information to it at each
level. At each stage of the process, a PDU
(protocol data unit) has a different name to
reflect its new functions. The PDUs are named
according to the protocols of the TCP/IP suite:
Data – The general term for the PDU used at the
application layer.
Segment – transport layer PDU
Packet – network layer PDU
Frame – data link layer PDU
Bits – A physical layer PDU used when
physically transmitting data over the medium

38. When IPv4 addressing is manually configured

on a web server, which property of the IPv4
configuration identifies the network and host
portion for an IPv4 address?

DNS server address

subnet mask
default gateway
DHCP server address

Explanation: There are several components that

need to be entered when configuring IPv4 for an
end device:
IPv4 address – uniquely identifies an end
device on the network
Subnet mask – determines the network
address portion and host portion for an IPv4

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 30 dari 66
 address
Default gateway – the IP address of the
router interface used for communicating with
hosts in another network
DNS server address – the IP address of
the Domain Name System (DNS) server

DHCP server address (if DHCP is used) is not

configured manually on end devices. It will be
provided by a DHCP server when an end device
requests an IP address.

39. What process involves placing one PDU inside

of another PDU?

encapsulation
encoding
segmentation
flow control

Explanation: When a message is placed inside

of another message, this is known as
encapsulation. On networks, encapsulation takes
place when one protocol data unit is carried
inside of the data field of the next lower protocol
data unit.

40. What layer is responsible for routing

messages through an internetwork in the TCP/IP
model?

internet
transport
network access

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 31 dari 66
 session

Explanation: The TCP/IP model consists of four

layers: application, transport, internet, and
network access. Of these four layers, it is the
internet layer that is responsible for routing
messages. The session layer is not part of the
TCP/IP model but is rather part of the OSI
model.

41. For the TCP/IP protocol suite, what is the

correct order of events when a Telnet message is
being prepared to be sent over the network?

Place the options in the following order:

The Telnet-formatted data is provided First

to the next layer.

The TCP header is added. Second

The IP header is added. Third

The Ethernet header is added. Fourth

42. Which PDU format is used when bits are

received from the network medium by the NIC of a

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 32 dari 66
 host?

file
frame
packet
segment

Explanation: When received at the physical

layer of a host, the bits are formatted into a
frame at the data link layer. A packet is the PDU
at the network layer. A segment is the PDU at the
transport layer. A file is a data structure that may
be used at the application layer.

43. Refer to the exhibit. ServerB is attempting to

contact HostA. Which two statements correctly
identify the addressing that ServerB will generate
in the process? (Choose two.)

ServerB will generate a packet with the

destination IP address of RouterB.
ServerB will generate a frame with the

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 33 dari 66
 destination MAC address of SwitchB.
ServerB will generate a packet with the
destination IP address of RouterA.
ServerB will generate a frame with the
destination MAC address of RouterB.
ServerB will generate a packet with the
destination IP address of HostA.
ServerB will generate a frame with the
destination MAC address of RouterA.

Explanation: In order to send data to HostA,

ServerB will generate a packet that contains the
IP address of the destination device on the
remote network and a frame that contains the
MAC address of the default gateway device on
the local network.

44. Which method allows a computer to react

accordingly when it requests data from a server
and the server takes too long to respond?

encapsulation
flow control
access method
response timeout

Explanation: If a computer makes a request and

does not hear a response within an acceptable
amount of time, the computer assumes that no
answer is coming and reacts accordingly.

45. A web client is receiving a response for a web

page from a web server. From the perspective of

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 34 dari 66
 the client, what is the correct order of the protocol
stack that is used to decode the received
transmission?

Ethernet, IP, TCP, HTTP

HTTP, TCP, IP, Ethernet
Ethernet, TCP, IP, HTTP
HTTP, Ethernet, IP, TCP

Explanation:
1. HTTP governs the way that a web server and
client interact.
2. TCP manages individual conversations
between web servers and clients.
3. IP is responsible for delivery across the best
path to the destination.
4. Ethernet takes the packet from IP and formats
it for transmission.

46. Which two OSI model layers have the same

functionality as a single layer of the TCP/IP
model? (Choose two.)

data link
network
physical
session
transport

Explanation: The OSI data link and physical

layers together are equivalent to the TCP/IP
network access layer. The OSI transport layer is
functionally equivalent to the TCP/IP transport
layer, and the OSI network layer is equivalent to

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 35 dari 66
 the TCP/IP internet layer. The OSI application,
presentation, and session layers are functionally
equivalent to the application layer within the
TCP/IP model.

47. At which layer of the OSI model would a

logical address be added during encapsulation?

physical layer
data link layer
network layer
transport layer

Explanation: Logical addresses, also known as

IP addresses, are added at the network layer.
Physical addresses are edded at the data link
layer. Port addresses are added at the transport
layer. No addresses are added at the physical
layer.

48. What is a characteristic of multicast

messages?

They are sent to a select group of hosts.

They are sent to all hosts on a network.
They must be acknowledged.
They are sent to a single destination.

Explanation: Multicast is a one-to-many type of

communication. Multicast messages are
addressed to a specific multicast group.

49. Which statement is correct about network

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 36 dari 66
 protocols?

Network protocols define the type of hardware

that is used and how it is mounted in racks.
They define how messages are exchanged
between the source and the destination.
They all function in the network access layer of
TCP/IP.
They are only required for exchange of
messages between devices on remote networks.

Explanation: Network protocols are

implemented in hardware, or software, or both.
They interact with each other within different
layers of a protocol stack. Protocols have nothing
to do with the installation of the network
equipment. Network protocols are required to
exchange information between source and
destination devices in both local and remote
networks.

50. What is an advantage of network devices

using open standard protocols?

Network communications is confined to data

transfers between devices from the same vendor.
A client host and a server running different
operating systems can successfully
exchange data.
Internet access can be controlled by a single ISP
in each market.
Competition and innovation are limited to specific
types of products.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 37 dari 66
 Explanation: An advantage of network devices
implementing open standard protocols, such as
from the TCP/IP suite, is that clients and servers
running different operating systems can
communicate with each other. Open standard
protocols facilitate innovation and competition
between vendors and across markets, and can
reduce the occurrence of monopolies in
networking markets.

51. Which device performs the function of

determining the path that messages should take
through internetworks?

a router
a firewall
a web server
a DSL modem

Explanation: A router is used to determine the

path that the messages should take through the
network. A firewall is used to filter incoming and
outgoing traffic. A DSL modem is used to provide
Internet connection for a home or an
organization.

52. Open the PT Activity. Perform the tasks in the

activity instructions and then answer the
question.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 38 dari 66
 CCNA-1-v7-Modules-1-3-Basic Network
Connectivity and Communications Exam
Answers 52

Modules 1 - 3: Basic
Network Download
Connectivity and
Communications
Exam - Packet
Tracer  0.00 KB
 17280 downloads

...

What is the IP address of the switch virtual

interface (SVI) on Switch0?

192.168.5.10
192.168.10.5
192.168.10.1
192.168.5.0

Explanation: After the enable command is

issued, the show running-configuration
command or the show ip interfaces brief
command will display the IP address of the
switch virtual interface (SVI).

53. Why would a Layer 2 switch need an IP

address?

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 39 dari 66
 to enable the switch to send broadcast frames to
attached PCs
to enable the switch to function as a default
gateway
to enable the switch to be managed remotely
to enable the switch to receive frames from
attached PCs

Explanation: A switch, as a Layer 2 device,

does not need an IP address to transmit frames
to attached devices. However, when a switch is
accessed remotely through the network, it must
have a Layer 3 address. The IP address must be
applied to a virtual interface rather than to a
physical interface. Routers, not switches,
function as default gateways.

54. Refer to the exhibit. An administrator is trying

to configure the switch but receives the error
message that is displayed in the exhibit. What is
the problem?

CCNA-1-v7-Modules-1-3-Basic Network
Connectivity and Communications Exam
Answers 54

The entire command, configure terminal, must be

used.
The administrator is already in global
configuration mode.
The administrator must first enter privileged
EXEC mode before issuing the command.

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 40 dari 66
 The administrator must connect via the console
port to access global configuration mode.

Explanation: In order to enter global

configuration mode, the command configure
terminal, or a shortened version such as config t,
must be entered from privileged EXEC mode. In
this scenario the administrator is in user EXEC
mode, as indicated by the > symbol after the
hostname. The administrator would need to use
the enable command to move into privileged
EXEC mode before entering the configure
terminal command.

55. What term describes a network owned by one

organization that provides safe and secure
access to individuals who work for a different
organization?

extranet
cloud
BYOD
quality of service

56. What term describes storing personal files on

servers over the internet to provide access
anywhere, anytime, and on any device?

cloud
BYOD
quality of service
converged network

57. What term describes a network where one

computer can be both client and server?

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 41 dari 66
 peer-to-peer
cloud
BYOD
quality of service

58. What term describes a type of network used

by people who work from home or from a small
remote office?

SOHO network
BYOD
quality of service
converged network

59. What term describes a computing model

where server software runs on dedicated
computers?

client/server
internet
intranet
extranet

61. What term describes a technology that allows

devices to connect to the LAN using an electrical
outlet?

powerline networking
internet
intranet
extranet

62. What term describes a policy that allows

network devices to manage the flow of data to
give priority to voice and video?

quality of service
internet

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 42 dari 66
 intranet
extranet

63. What term describes a private collection of

LANs and WANs that belongs to an organization?

intranet
internet
extranet
peer-to-peer

64. What term describes the ability to use

personal devices across a business or campus
network?

BYOD
internet
intranet
extranet

65. At which OSI layer is a source IP address

added to a PDU during the encapsulation
process?

network layer
data link layer
transport layer
application layer

66. At which OSI layer is a destination port

number added to a PDU during the encapsulation
process?

transport layer
data link layer
network layer
application layer

67. At which OSI layer is data added to a PDU

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 43 dari 66
 during the encapsulation process?

application layer
data link layer
network layer
transport layer

68. At which OSI layer is a source IP address

added to a PDU during the encapsulation
process?

network layer
data link layer
application layer
presentation layer

69. Which of the following is the name for all

computers connected to a network that
participate directly in network communication?

Servers
Intermediary device
Host
media

Explanation: Hosts are all computers connected

to a network that participate directly in network
communication.

70. At which OSI layer is a destination IP address

added to a PDU during the encapsulation
process?

network layer
application layer
transport layer

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 44 dari 66
 presentation layer

71. At which OSI layer is a source MAC address

added to a PDU during the encapsulation
process?

data link layer

application layer
transport layer
presentation layer

72. At which OSI layer is a source port number

added to a PDU during the encapsulation
process?

transport layer
application layer
network layer
presentation layer
data link layer

73. At which OSI layer is a destination MAC

address added to a PDU during the encapsulation
process?

data link layer

transport layer
application layer
network layer

74. When data is encoded as pulses of light,

which media is being used to transmit the data?

Wireless
Fire optic cable
Copper cable

Explanation: Fiber-optic cable is the media is

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 45 dari 66
 being used to transmit the data when data is
encoded as pulses of light.

75. Which two devices are intermediary devices?

(Choose two)

Host
Router
Switch
Servers

Explanation: Routers and switches are

intermediary devices.

← Previous Article Next Article →

CCNA 1 v7 Exam CCNA 1 v7 Modules 4 –
Answers – Introduction 7: Ethernet Concepts
to Networks v7.0 (ITN) Exam Answers

 Subscribe 

Join the discussion

{} [+]

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 46 dari 66
 129 COMMENTS

Slice  18 days ago

Are these questions still the in october 2024.

Im about to have the exam and I need know
if these answers still work after the new
system update.
Reply

Julio  9 days ago

 Reply to Slice
Were those the question for your
exam or did they changed it?

Reply

_one_  27 days ago

What characteristic of a network enables it to

quickly grow to support new users and
applications without impacting the
performance of the service being delivered
to existing users?

Reply

Peter  26 days ago

 Reply to _one_
Scalability
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 47 dari 66
 _one_  27 days ago

In which scenario would the use of a WISP

be recommended?
Reply

Peter  26 days ago

 Reply to _one_
A farm in a rural area without wired
broadband access.
Reply

isaK  1 month ago

What command will prevent all unencrypted

passwords from displaying in plain text in a
configuration file?

(config)# enable secret

Secret_Password
(config-line)# password secret
(config)# enable password secret
(config)# enable secret
Encrypted_Password
(config)# service password-encryption

Reply

Armageddon  1 month ago

 Reply to isaK
(config)# service password-
encryption
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 48 dari 66
 azam  1 month ago

Are they still the same for September 2024

???

Reply

nononono  28 days ago

 Reply to azam
yup
Reply

Sheikh  3 months ago

51What term describes a network owned by

one organization that provides safe and
secure access to individuals who work for a
different organization?

extranet
cloud
quality of service
BYOD

The right answer is BYOD.

Reply

Debora  14 days ago

 Reply to Sheikh
extranet
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 49 dari 66
 Mohamed Khaled  4 months ago

Which two characteristics describe Ethernet

technology? (Choose two.)
Reply

Kafeel Ahmed  4 months ago

I have given my first module Assessment

and got 93.9 %. Mostly all the questions
were same. and I have attempted according
these answers.

Reply

cyber  4 months ago

hello is this accurate in 2024 please

feedback asap ty

Reply

IT Administrator  4 months ago

Author
 Reply to cyber
still valid

Reply

cyber  4 months ago

 Reply to IT Administrator
thank you
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 50 dari 66
 Harry Ikwayoni  6 months ago

I am a new student studying this ccna 1 so

post the exam questions to my email
address

Reply

jonathan joestar  9 months ago

Open the PT Activity. Perform the tasks in

the activity instructions and then answer the
question.

What is the IP address of the switch virtual

interface (SVI) on Switch0?

192.168.5.10
Reply

BODE GANSALLO  1 year ago

Thanks so much Mr ONI

Reply

Jas  1 year ago

Are they the same questions for September

2023
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 51 dari 66
 Moiz  1 year ago

Question?
Reply

Sameer  1 year ago

user is implementing security on a small

office network. Which two actions would
provide the minimum security requirements
for this network? (Choose two.)
Reply

Shaunn T  1 month ago

 Reply to Sameer
add a firewall
install an antivirus software
Reply

Pritam kumar  1 year ago

thanks a lot man

Reply

rayst  1 year ago

Are they the same questions for February

2023?
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 52 dari 66
 rG  1 year ago

 Reply to rayst
yes

Reply

Crl  1 year ago

 Reply to rayst
is the same ?
Reply

Crl  1 year ago

 Reply to rayst
Is the same?
Reply

rory  1 year ago

think u

Reply

Daniel  1 year ago

Thanks for helping. Much blessing to you

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 53 dari 66
 Faysal  1 year ago

Sehr hilfreich
Reply

sean  1 year ago

Match the term to the value represented.

BIT
BYTE
GIGABYTE
KILOBYTE
MEGABYTE
TERABYTE
Reply

BODE GANSALLO  1 year ago

 Reply to sean
BIT
BYTE
KILOBYTE
MEGABYTE
GIGABYTE
TERABYTE
Reply

Max  1 year ago

Thanks!
Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 54 dari 66
 hue  1 year ago

thanks a lot
Reply

Evans  1 year ago

thanks for helping

Reply

Rodrigue  1 year ago

Thanks for your help

Reply

Rose  2 years ago

Thank you very much for sharing this. I

didn’t care much it’s legit or not. it’s finally
done.
Reply

Tam Tur  2 years ago

COOL Thank You vey much! ;o)

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 55 dari 66
 Thanh  2 years ago

Thanks so much
Reply

Jakeidk  2 years ago

Trust me guys, it only gets worse

Reply

hutr  2 years ago

Thanks so much

Reply

Uche  2 years ago

Thanks very much

Reply

Amr  2 years ago

Thanks so much
Reply

Patrick  2 years ago

Thank you very much

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 56 dari 66
 Eduson  2 years ago

I love this page!

Reply

Tedy  2 years ago

PLS correct this:

69. Which of the following is the name for all

computers connected to a network that
participate directly in network
communication?

Servers
Intermediary device – not correct
Host media – correct
PLS corect this:
Reply

Zelalem  2 years ago

Thank you for your support. but answers of

question no 69 is not correct
Reply

Pepa Jamnický dsf  2 years ago

very good wether todaj, maine svarta is god

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 57 dari 66
 Muhammed  2 years ago

güzel
Reply

ikot  3 years ago

Which attack slows down or crashes

equipment and programs?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option creates a secure connection

for remote workers?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option blocks unauthorized access to

your network?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option describes a network attack that

occurs on the first day that a vulnerability
becomes known?

1. Firewall

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 58 dari 66
 2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Which option describes malicious code

running on user devices?

1. Firewall
2. Virus, worm, or Trojan horse
3. Zero-day or Zero-hour
4. Virtual Private Network (VPN)
5. Denial of Service (DoS)

Reply

ikot  3 years ago

Which feature is a good conferencing tool to

use with others who are located elsewhere in
your city, or even in another country?

1. BYOD
2. Video communications
3. Cloud computing

Which feature describes using personal tools

to access information and communicate
across a business or campus network?

1. BYOD
2. Video communications
3. Cloud computing

Which feature contains options such as

Public, Private, Custom and Hybrid?

1. BYOD
2. Video communications

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 59 dari 66
 3. Cloud computing

Which feature is being used when

connecting a device to the network using an
electrical outlet?

1. Smart home technology

2. Powerline
3. Wireless broadband

Which feature uses the same cellular

technology as a smart phone?

1. Smart home technology

2. Powerline
3. Wireless broadband

Reply

ikot  3 years ago

When designers follow accepted standards

and protocols, which of the four basic
characteristics of network architecture is
achieved?

1. fault tolerance
2. Scalability
3. QoS
4. Security

Confidentiality, integrity, and availability are

requirements of which of the four basic
characteristics of network architecture?

1. fault tolerance
2. Scalability
3. QoS
4. Security

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 60 dari 66
 With which type of policy, a router can
manage the flow of data and voice traffic,
giving priority to voice communications if the
network experiences congestion?

1. fault tolerance
2. Scalability
3. QoS
4. Security

Having multiple paths to a destination is

known as redundancy. This is an example of
which characteristic of network architecture?

1. fault tolerance
2. Scalability
3. QoS
4. Security

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 61 dari 66
 ikot  3 years ago

Which network infrastructure provides

access to users and end devices in a small
geographical area, which is typically a
network in a department in an enterprise, a
home, or small business?

1. Extranet
2. Intranet
3. LAN
4. WAN

Which network infrastructure might an

organization use to provide secure and safe
access to individuals who work for a different
organization but require access to the
organization’s data?

1. Extranet
2. Intranet
3. LAN
4. WAN

Which network infrastructure provides

access to other networks over a large
geographical area, which is often owned and
managed by a telecommunications service
provider?

1. Extranet
2. Intranet
3. LAN
4. WAN

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 62 dari 66
 someone  3 years ago

is there is a way to delete the mark of the

answers and after answering them to view it
again ?

Reply

Anon  3 years ago

 Reply to someone
You can copy the text and transfer it to
a text editor on your computer, then
assign a single color to the entire text
and remove the bold text.
Reply

Anything  3 years ago

Good quiz!!
Reply

Anonymous  3 years ago

In the show running-config command,

which part of the syntax is represented
by running-config ?

a keyword
a variable
a prompt
the command
Navigation Bar

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 63 dari 66
 Edgar  3 years ago

 Reply to Anonymous
keyword
Reply

Anonymius  3 years ago

 Reply to Anonymous
a keyword

Reply

someone  3 years ago

 Reply to Anonymous
is there is a way to delete the mark of
the answers and after answering them
to view it again ?

?
Reply

IT Administrator  3 years ago

Author
 Reply to someone
Try Online test:
https://itexamanswers.net/ccna-1-
v7-modules-1-3-basic-network-
connectivity-and-communications-
test-online.html

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 64 dari 66
 Barath Kumar  3 years ago

 Reply to Anonymous
Keyword

Reply

Tob  1 year ago

 Reply to Anonymous
Keyword
Reply

balvinder  3 years ago

To prepare for exam, only CCNAv7

Questions are enough or should i also
complete CCNAv6 .
Waiting for reply
Thanks
Reply

IT Administrator  3 years ago

 Reply to balvinder
Author
Only v7

Reply

Lucky  3 years ago

Nice job guys

Reply

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 65 dari 66
 Erdenebat  3 years ago

thanks guys

Reply

Guess  3 years ago

Great job thanks guys.

Reply

Ali  3 years ago

It’s also same questions in 2021. Good luck

Reply

Load More Comments

ITExamAnswers.net Copyright © 2024. Privacy Policy

Contact

https://itexamanswers.net/ccna-1-v7-modules-1-3-basic-network-connectivity-and-communications-exam-answers.html 27/10/24, 17.39

Halaman 66 dari 66