Micro-project

Submitted to

MAHARASHTRA STATE BOARD OF TECHNICAL

EDUCATION, MUMBAI

 Academic Year = 2024-2025

 Submitted in Academic Year as part of First

Year k scheme curriculum of the subject
(ICT)of First Semester of Diploma in
Computer Engineering

 Submitted By = Ritesh jagtap

 Under the guidance of = Pratiksha patil mam

 Topic of Microproject = Report on

Different Types of Printers

1 | Page
 The Shirpur Education Society’s
R. C. Patel Polytechnic, Shirpur

 Certificate

 This is to certify that the following

students of First Year Diploma computer
Engineering at SES’ R. C. PATEL
POLYTECHNIC, Shirpur (1808), has
satisfactorily completed Micro
Project….., in the subject basics (ICT),
as prescribed by MSBTE, Mumbai in the
curriculum of k scheme in the academic
year 2024-25.

Sr Name of the Enrollme Seat No.

No. student. nt No.

1 Ritesh Jagtap
2
3

2 | Page
Date=
Place = Shirpur

3 | Page
 Index
Sr Topic Pg no.
no.
1 Introduction 1

2 Certificate 2

3 Index 3

4 Submission 4

5 Part – A

1.Aim
2. Course Out Come
3.Proposed Methodology
4.Report of the Micro Project
5.Resource Required

6 Part – B

1.Rationale
2.. Aim of micro project
3.Course outcome
Addressed
4.Literature Review
5.Actual methodology
Followed
6 .Skilled Developed \
outcome of the
Microproject.
4 | Page
 7. Conclusion
8. Application of
microproject.

Rc patel College of engineering And

Polytechnic Shirpur

SUBMISSION

We, the students of First year of

Department of Computer Engineering,
humbly completed this Micro-project
work on “types of the printer ” for time
to time as described in This report by
our own skill and study between the
periods from 2024-2025

As per instruction and guidance of

Mrs.Pratiksha patil mam and following
students were associated with us for
this work. However, quantum of our
contribution has been approved by the
guide.

 Project Group members

5 | Page
 1 24 Ritesh Jagtap 246126200
56

6 | Page
  Part – A Micro-Project Proposal

 Prepare a Presentation on Types of

Printer

1.0 Aims/Benefits of the Micro-Project (minimum 30-50

words)=
A printer is a device that accepts space text and graphic
output the information to paper usually to standard size 8.5
by 11 sheet of paper. Higher Image quality. There is no
denying the fact that production printers are big machines.
More Productivity. By natural product printers get more work
done faster than a standers printer or MFP.

2.0 Course Outcomes Addressed

* Students are able to understand the concept
onTypes of Printers.
*This micro project helps to know more about
Types of Printers
o Proposed Methodology
(Procedure in brief that will be followed to do the
microproject) in about 100 to 200 words)
 First all team members discussed about the
topic and select the topic.
 All team members will search on internet to
get more information about the topic and to
know resources.
4.0 REPORTS FOR THE MICRO-PROJECT

7 | Page
The micro-project report has two parts (format is
attached as Annexure I).
First part is 'Project Proposal' about two pages in
12-point calibre font of 1.2 spacing with margins
of 2.5 centimetres, top, bottom, right and left in
the format given in the Annexure- I.
This is related to the planning, which should be
submitted by the end of fourth week of the
semester.
The purpose of this part is to teach the student
to plan and also to ensure that students finalize
their title and start working by the fourth week.

5.0 Resources required (major resources

such as raw material,some machining
facility, software etc.)
Sr Name of Specificati Quantity Remark
no. resource / on
Material
1 Books ICT module
1
Mentioned in
the project
2 Computer Asus 1
internet

8 | Page
 Part – B Micro-Project Report
Prepare a Presentation on Types of Printers
1.0 Rationale
Printers have also advanced too and no longer
are they just a device for you to print things
from. You can use them for scanning, copying,
printing out high quality photos and much more.
By speaking to a company that offers a managed
print solution, you can also see how they can be
of real benefit to your business.
2.0 Aims/Benefits of the micro project
Hardware requires software to run correctly.
Without the correct hardware, your software may
not run efficiently or at all. It is important to
consider both when making decisions about your
IT systems, as this can affect the way you work,
your productivity and your business' bottom line.
Software is a collection of instructions that tell a
computer how to work. This is in contrast to
hardware, from which the system is built and
actually performs the work.

9 | Page
3.0 Course Outcomes Addressed
(a) Students are able to understand the concept
on the types of printers.
(b) This micro project helps to know more about
the types of printer Page.

4.0 Literature Review

Printers

Impact Printer Non-Impact

Printer

Daisy Dot Inkjet

Themal Laser
Wheel Matrix

5.0 WHAT IS THE PRINTER

An external hardware device responsible for
taking computer data and generating a hard copy
of that data . printer are one of the most
commonly used peripherals and they print text
and still image on the paper

10 | P a g e
  IMPACT PRINTER
 These printers have a mechanism that touches the paper to
create an image. These printers work by banging a print head
containing a number of metal pins which strike an inked ribbon
placed between the print head and the paper.

 NON IMPACT PRINTER

These printers are create an image on the print medium

without the use of force they don’t touch the paper while
creating a image. Non-impact printers us they don’t strike the
paper.

 DOT MATRIX PRINTER

 The term dot matrix refers to process of placing dot to
form an image.
 Its speed is usually 30 to 550 characters per second (cps)
 This is the cheapest and the noisiest printer and has a low
print quality
 Dot matrix was 1st introduced by Centronics in 1970
 ADVANTAGE AND DISADVANTAGE OF
DOT MATRIXPRINTER

 INK-JET PRINTER

11 | P a g e
 It is a non-impact printer
producing a standard inkjet printer has a
resolution of 300dpi.Newer models have further
improved dpi. Inkjet printers were introduced in
the latter half of 1980s and are very popular
owing to their extra ordinary performance.

 Advantage  Disadvantage
Great for photos and image Inkjet ink is more
heavy documents. expensive
Inkjet printers do a better job than champagne
of blending smooth colours
than
laser printers.
Inkjet printers have a Inkjet ink is water-
low based, so
start-up cost. Printers prints are susceptible
are less expensive than to
laser printers and water damage and
inkjet ink cartridges fading.
are cheaper than toner
cartridges.
Inkjet printers have a low Ink cartridges need
start-up cost. Printers are frequent
less cleaning.
expensive than laser
printers
Although printers
and inkjet ink cartridges perform
are this maintenance
12 | P a g e
 cheaper than toner automatically, it
cartridges. wastes lots
of ink.

 DYE SUBLIMATION PRINTER

A dye-sublimation printer is a printer that works by
heating ink and then depositing it on a
surface. The term arises from the misconception that the ink
goes from solid to gas without going through a liquid phase, or
sublimation. Dye-sublimation printers are used for printing
photos and designs on solid objects

Advantages Disadvantages
For fabrics, dye There are actually very
sublimation few
printing is usually seen disadvantages to dye
as a better option than sublimation
inkjet printing. printing fabrics
The biggest advantage The biggest issue that
is that dye sublimation arises or causes
creates a finished problems is that the
product that is process is much slower
noticeably more than using inkjet
durable than a product printing
printed with an inkjet
printer.

13 | P a g e
 As the dye essentially There are more steps
impregnates the fabric, in dye
it actually becomes a sublimation, and it
part of the fabric requires
itself. additional labor, which
can cause the price to
be a bit higher than
other processes.
The printing then Another disadvantage
cannot be a
damaged with wear, production issue more
nor can it be flaked off common with older
or crack. printers.

14 | P a g e
  MULTIFUNTION PRINTER

A multifunction printer
(also known as an MFP) is a piece of office
equipment or machinery that serves the primary
purpose of copying and printing documents. Over
time, multifunction printers have been referred
to as photocopiers, copiers, Xerox machines, and
a host of other names.

Advantages Disadvantages
multi-function printers Multi-function printers
save a great deal of are high in versatility
space. but typically low in
specialization
higher initial costs Nor will an all-in-one
than printers without printer
multi-function typically have the
capability, same copying features
They are the more Multi-function printers
energy-efficient option are
and the alternative versatile, effective
printers that perform
the functions of four

15 | P a g e
 separate machines

 3-D Printer

3D printing, also known as

additive manufacturing, is a method of
creating a three-dimensional object layer-by-
layer using a computer created design. 3D
printing is an additive process whereby
layers of material are built up
to create a 3D part.

Advantage Disadvantage

3D printing allows for 3D printers are

the design and print becoming
of more complex more and more
designs than accessible with more
traditional local service
manufacturing providers offering
processes. outsourcing services
for manufacturing
work.
This saves space and As this technology
costs as there is no reduces the amount
need to print in bulk of material wastage
unless required

16 | P a g e
 3D printing can print This can increase
object within hours, costs and time for
which is much larger parts.
faster than moulded
or
machined parts.

17 | P a g e
5.0 Outputs of the Micro-Projects
(Creating the informative chart about types of
printer .)
(Convert the information in systematic procedure
on
chart and presentation on the collect data.)
identify the main idea(s) in the text.
● identify specific details.
● distinguish main idea(s) from supporting detail.
● distinguish fact from opinion.
● we are all able to use computers
● Specially we are used formula on computer to
be typing.

6.0 Skills Developed/Learning outcomes of this

micro project
Helps to understand attitude of others and creates
awareness of special needs of research process.
Improving
your reading skills will reduce unnecessary reading time
and
enable you to read in a more focused and selective
manner.
You will also be able to increase your levels of
understanding
and concentration. The helps us in study in computers
and

18 | P a g e
solving our derivation. Helps to understand attitude of
others
and creates awareness of special needs of research
process.
Improving your reading skills will reduce unnecessary
reading
time and enable you to read in a more focused and
selective
manner. You will be able to increase your levels of
understanding
and concentration.
7.0 Conclusion
In Conclusion, Selecting the right printer involves
evaluating costs, quality, Speed and accessing your
specific needs to choose the most suitable printer type
for your application.

19 | P a g e
 8.0. Application of this Micro-project

 Software

 Microsoft Word. I already mentioned

Microsoft Word as being a great
example of application software.
 Google Chrome. Another application
software I referred to a few times is
Google Chrome.
 Firefox.
 Skype.
 Windows Media Player.
 VLC Media Player.
 Microsoft Access.
 Photoshop.

 Hardware
Motherboard, central processing unit, random access memory, hard
disk drive, monitor, keyboard, mouse, printer, speaker, joystick.

The hardware of the computer system includes

monitor, CPU,
keyboard, mouse, printer, sound system, RAM,
hard disk and
many more. Hardware is used for taking input
data from the
user, store the data and display the output and
execute the
commands given by an individual.

20 | P a g e