User Guide

Wireless Pan/Tilt/Zoom Security Camera

W54F5MP-WP
Contents
Declaration 1
Introduction 2
Product Detail 3
Insert Micro SD Card 4
Multiple Connection 5
Set Up Your Camera 6
Add Camera 7
Format Micro SD Card 10
Wall Mount 11
Tracking Setting 12
Motion Detection and Push Alert Message 14
Actions When Detect a Motion 15
Playback and Download Videos From Micro SD Card 17
Device Information 20
How to Use Two-way Talk Function 21
IR LED Night Vision and Floodlight 22
Share The Camera With Your Family 23
Camera Works On Other Devices 23
ONVIF & RTSP 23
How to Reset The Camera 24
Connect to Blue iris 24
Connect to Synology 25
Connect to QNAP 26
Connect to iSpy 30
Warranty & Support 32
Trouble Shooting 33
Declaration
Copyright C 2021 Boavision Technology Co.,Ltd All Rights Reserved.

Without written permission, please do dot Imitate, Reproduce, or translate part or all of the contents of this manual, and cannot be
used for commercial dissemination in any form.

This guide provides a brief introduction to the Pan/Tilt home security Wi-Fi Camera and the CamHipro app, as well as regulatory
information.Please note that The Product Specifications, Appearance Pictures And Related Information Mentioned In This Manual
Are For Reference Only and may not reflect your actual Boavision Camera experience.

Conventions
In this guide, the following convention is used:

Convention Description

Key information appears in teal, including management page text such as menus,
Blue items, buttons and so on.

Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.

Ignoring this type of note might result in a malfunction or damage to the device.
Note：

1
Introduction
When you are away home, there are always something you care about. This is where the smart camera functions. No matter your
child is climbing the kitchen cabinet, or the pet is stealing snacks, the Pan/Tilt Home Security Wi-Fi Camera helps you stay with
them anytime, anywhere. Receive a notification whenever your camera detects motion and see a video clip of this motion to check
everything.

• Smooth Pan and Tilt – 355° horizontal range and 90° vertical range.
• 5MP High -Definition – Capture every detail in crystal-clear Full HD definition.
• Advanced Night View – Even at night, the camera can provide a visual distance of up to 328 ft.
• Live View – Always stay with that matters most to you from anywhere, anytime.
• Two-Way Audio – Communicate with others with the built-in microphone and speaker.
• Sound and Light Alarm – Trigger light and sound effects to frighten away unwanted visitors.
• Privacy Mode - Shut down the surveillance to protect your privacy.
• Sharing - Share the memorable moments with your family and friends.
• Safe Storage – Store up to 128 GB on a micro SD card, equal to 384 hours (16 days) of footage.
*The micro SD card is not included in the package.

2
Product Detail

Wifi Antenna

Lens
IR Leds

Light Sensor
Micro SD Card Slot

DC 12V
POE Reset
( Optional use )
Note：
Note： Long press the reset button for 20
POE Port only Work with seconds to factory default
802.3at PoE Plus Device

3
Insert Micro SD Card
Open the bottom micro SD Card slot cover with a small screw driver
Insert a micro SD card (Support Class 10, 8Gb~128Gb, micro SD Card Not Included ,Sold Separate)

Note：
1. Support Class 10, 8Gb~128Gb,
micro SD Card Not Included ,Sold
Separate.
2. Initialize the micro SD card on the
app before using it . Please power off
the camera when you insert the micro
SD card.

Golden Face UP

Undo Screws and Insert the micro SD card

4
Multiple Connection
WiFi Wireless Connection:
l.Wireless Connected with wifi Router

2.4Ghz WIFI

WIRELESS ROUTER
ONVIF NVR

POE Wired Connection:

ll. Wired Connected with standard POE switch (48v-52v)

WIRELESS ROUTER

ONVIF NVR
POE SWITCH (802.3at POE Plus Required)

5
Set Up Your Camera
Note： For Android Phones, Please Select "Agree" To The Tips Pop-Up：
1. Allow Camhipro To Access Mobile Cellular Data And Wireless Lan, Otherwise It Can not Add Camera.
2. Allow Camhipro To Receive Pushed Messages, Otherwise The Phone Will Not Receive an Alarm Push Message.
3. Allow Camhipro To Use The Microphone When You Want To Use 2 Way Audio Function.

Download The "Camhipro" App From The

Apple App Store Or From The Google
Play Store.
Note：
CamHipro
Please use Supplied Power Adapter

Note：
Please Keep Your Phone and Camera
Close to WiFi Router

Note：Please Make Sure Your Router Is Working Properly，And The Wifi Signal
Is 2.4Ghz,Camera Only Support 2.4Ghz Wifi, Not 5Ghz. If Your 2.4Ghz Wifi And
5Ghz Wifi Are Same Ssid, You Need To Separate The Ssid, By Login To Your Wifi
Router.

6
Add Camera
Please follow the steps below to find the hotspot AP of the camera and connect to it, set up the camera's WiFi, and let it connect to the WiFi router in your home wirelessly.

Setup Via AP Mode

Add device
Settings Wi-Fi Camera
IP camera
Wi-Fi Note：
IPCAM-XXXXXX
If You Do Not Find The AP Wifi
of The Camera,Press And Hold
The Reset Button (On The Tail
Line) For 20 Seconds to Reset Device in use
the Camera and Search Again in Add Camera In-use device that has been connected to the
Your WLAN. LAN / Internet

Search nearby devices

Find the UID number in the same LAN

Step 1. Step 2.
Turn On The Mobile Wlan And Look For The Hotspot Wifi Open The Camhipro App, Select --->“+”--->“IP
"IPCAM-XXXXX" In Your Network List Camera”--->“Device In Use”--->“Search Nearby
Use The Default Password "01234567" To Connect. Devices”

7
 UID: XXXX-XXXXXX-XXXXX Mywifi Your wifi

singal:95% WPA2_ TKIP

username: admin
XXXX-XXXXXX-XXXXX
192.168.1.46
password: admin
Wireless setting
Your wifi
Wireless name: Mywifi x
Password
Password: XXXXXXXX x

Apply
Add to

Step 3. Step 4.
Tap On The Device Listed Under Lan. The Name Now,Tap On The Gear Wheel Icon “ ” ---> Tap On Wireless
Should Be “XXXX-XXXXX-XXXXX”（Default Setting “ ” And Select Prefered Network And Enter The Password.
User"admin",Password "admin").Click“Add To”And
Setup The Device Name.

8
 Note：If You Can not Successfully Connect To The Camera Via Ap(Access Point Wifi), We Suggest To Try
The Optional Setup As Below:

Setup With Network Cable (Optional)

Wireless setup is successful Wireless setup is successful

1. Connect The Camera To The Lan Port Of Your Wifi Router Note：It is highly recommended to change password.
With A Network Cable Temporarily. 1. From the main screen tap the gear wheel icon and then “Change
Password” .
2. Then Repeat Step 2,Step 3, Step 4 as above.
2. Enter the old password (if this is the first setup it will be “admin”)
3. Then Remove The Cable And Wait 10 Seconds The Camera then enter the new password in the next two fields. Then tap
APPLY. You can check you have done the correct password by
Will Connect To Your Wifi Router Wirelessly.
tapping the circle next to “show password”.

9
Format Micro SD Card
Open Camhipro app, Tap on the Gear Wheel Icon” “ --> SD card setting --> format SD card.

Note： The camera will start loop recording once installed micro sd card, 10min per video,the latest video will
cover the oldest video.

Format SD Card

SD card setting

10
Wall Mount
Paste the drilling location mark on the wall, then drill the hole according to the mark and Insert the anchors, pass the screw
through the back of the bracket, and fix the top of the bracket on the wall.

Wall
Drilling Location Mark
Anchors
Screws
1. Mark Position 2. Mount Camera
Place the mounting template where you Affix the camera base using the screws. For wall mounting, insert four
want the camera.For wall mounting, drill anchors into the holes and use the screws to affix the camera base over
four holes through four circles. the anchors.

11
Tracking Setting
Auto Tracking Setting：

Auto Tracking Setting

Step 1 :
Preset 92 (Default Position)

1 2

Step 2 :
Call 92 (Start Tracking) Call 94 ( Stop Tracking)

3 4
12
Tracking Setting
Auto Patroling Setting：

Preset the patroling

positions

Setup 1,2,3,4,5,6,7,8
( patroling posions )

1 2

Call 93 (Start to patroling) Call 94 (Stop patroling）

3 4
13
Motion Detection and Push Alert Message
Open Camhipro app, Tap on the Gear Wheel Icon” “
--> Alarm management and notification-->Turn on both “Receive alarm push” and “Motion detection alarm”.
Note：1. If you want the camera also detects a sound, please turn on “Audible alarm”.
2. If you only want the camera detect motion at night or any special time, you can go to “Advanced Setting” to set up
the time range.

Receive alarm push

CAMHIPRO now
Camera
Motion Alarm AABB-42xx42-xxxxx

Motion detection alarm

Trigger an alarm when the device screen
detects a moving object
Alarm management and notification

14
Actions When Detect a Motion
Save Motion Videos to micro SD Card Sound Warning
If you have inserted a micro SD card to camera, you If you want the camera warning with a sound when detect
will be able to turn on the switch “Alarm recording to the motion, please turn on “When the alarm is triggered,
SD card” (can not turn on if no sd card). the device issues a siren”.

When the alarm is triggered,the

device issues a siren

Alarm recording to SD card

15
Email Alert (Gmail setting reference)
1. If you want camera send an Email Alert with
picture, you can turn on “Alarm Capture sent
to Email”, and configure Email, see below photos
for your reference.
2. Tap “Apply” before Test

Note：Please turn on Gmail 2-factor Authentication ........

1. If your gmail has not turned on 2-factor
authentication
a. Login gmail account and go to Google apps -->
Account -->Security page.
Alarm capture sent to Email
b. Scroll the page down to Less secure app acess
and click to turn it on (only personal gmail Configure Email
account has this option)

Apply
2. If you gmail has turned on 2-factor authentication
a. Please login gmail account and go to Google
apps-->Account-->Security page, find 2-step
verification and turn on.
b. Setup an APP password, select windows mail type,
and use this unique password instead your original
gmail password in email alert settinge page.

16
Playback and Download Videos From Micro SD Card
Please tap the icon to check videos saved in micro SD card, select and tap a video to play, if you wan t to find older videos,
tap the right down Search icon to select the date.

Note： Select your Time Zone, and enable Daylight Saving Time, then Click Saving Time Zone for Device,
Open Camhipro app, Tap on the Gear Wheel Icon” “
--> Time Setting --> Enable Daylight Saving Time --> Saving Time Zone for Device.

AABB-4XXXXX-XXXXX AABB-4XXXXX-XXXXX AABB-4XXXXX-XXXXX

AABB-4XXXXX-XXXXX

Play

17
Upload Pictures and Videos to FTP Server
If you want to upload pictures and videos to FTP server, please turn on “Alarm recording to FTP” and “Alarm Capture saved to FTP”,
and configure FTP, Tap “Apply” before test.

This IP address is the example for setup

192.168.1.xxx

········

Apply
Alarm recording to FTP

Alarm capture saved to FTP

Configuring FTP

18
Download Video
Select the video --> Tap the video --> Tap Download --->after Download complete, Tap “To View”.
If you want to save this video to phone or share with family, you can tap download icon to save to album,
then you can find the videos in your phone photo album. right down Search icon to select the date (make sure your camera
date and time were right when recorded).

AABB-4XXXXX-XXXXX AABB-4XXXXX-XXXXX

Download

To view Save to album

19
 Note：
1. The camera will continue loop record videos after you inserted the sd card.
2. Saved to sd card 10min per video, no matter if there is a motion, there is a blue label “plan recording” for this kind
of videos.
3. If you have turned on the motion detection and action with alarm “Alarm recording to SD card”, you may also find
there are 14s short videos with Orange label “Alarm Recording”, these videos are all recorded when the camera is
triggered by a motion.
4. The Alarm recording could stop the Plan recording when there is a motion, so the plan recording maybe shorter
than normal 10min per video.
5. If you just want to save the motion videos and hope the limited sd card to save videos for a longer time, please go
to “SD card plan record” to turn OFF “Enable record”, and also make sure “motion deteciton alarm” and “motion
reording to sd card” are both opened.

Device Information
You can easily find camera ip address with the device information, and access the camera with its ip address on Web browser.
(IE, Edge, Firefox, Chrom, Safari)

20
How to Use Two-way Talk Function
If you want to talk with camera, need go to live video page
Step 1: Activate the Speaker icon, you can hear from camera
Step 2: Active the Microphone icon to speak
Note： You can not hear from camera when you active microphone,
and can not speak when you hear from the camera, so you
need switch from the microphone and speaker.

AABB-4XXXX-XXXXX

Speaker

Microphone

21
IR LED Night Vision and Floodlight
This smart camera has 3 types night vision mode:
Ordinary: IR LED works at night (light is low) automatically, picture is black/white, Floodlight does not work.
Color: IR LED does not work at night, Floodlight works at night, picture is color .
Intelligent: IR LED works at night, and when there is a motion detected, the IR LED will be off, the Floodlight will be on for 30
seconds, the it will be off if there is no motion in 30 seconds, if there are continue motions, the floodlight working
time will extend until no motion detected, after floodlight off, the IR led will work again.

AABB-4XXXX-XXXXX AABB-4XXXX-XXXXX

Night vision mode

Ordinary

Color
+ +
+

Intelligent
Night vision
mode

22
Share The Camera With Your Family
Each camera can be managed by several Camhipro app
1. After you setup the camera connected to your home WiFi, go to setting page;
2. Find top right share icon to get a QR code;
3. Then ask your family download Camhipro, scan the QR code to add the camera to the device list.

Camera Works On Other Devices

This small outdoor security camera not only works with phone app Camhipro, but also works on windows PC / MAC / ipad/ android
pad, we offer free windows pc software which could connect camera locally and remotely.
For Mac, it can only work with Safari via local ip address.
Please check detail instructions on www.boavision.com/download.html
Support page or contact our support team via Email [email protected]
If you need help for making it work with other devices or 3rd party ONVIF software/device.

ONVIF & RTSP

ONVIF:
If you want to add the camera to 3rd party onvif software/device, please find the camera ip address from device information
(settge page), usually we should use.
information below:
Protocol: ONVIF , Ip address , Onvif port : 8080 , User: admin , Password: admin (for
some special software may need more information, please contact us for remote online
help, we use Teamviewer to help you to setup remotely).
RTSP:
The camera RTSP port is 554, and there are two live H.264 rtsp stream,
main stream: http://ip address:554/11
sub steam: http://ip address:554/12
E.g. If camera ip address is 192.168.1.123, main steam: http://192.168.1.123:554/11
23
How to Reset The Camera
Connect camera to power adapter, press and hold camera reset button for 20 seconds, it will reset and restart in 1 min, the reset
button is on the cable with a cover.

Connect to Blue Iris

Input ip address and onvif port: 8080, click Find/Inspect

Note：
Camera IP Address 1. Camera IP Address
Find/inspect...
2. Discovery/ONVIF port 8080
3. Make Generic
Make Generic
4. Find/inspect...
Discovery/ONVIF port 8080
5. OK

OK

24
Connect to Synology
1 Add Camera Wizard x 2 Add Camera Wizard x
Setup Information
Select a setup mode: Quick Setup Name: CamhiPro Camera
Complete Setup IP address: 192.168.1.223
Port: 8080
Brand: [ONVIF]

Camera model: All functions

Username: admin
Password: ········
Load Capability Test Connetion

Next Cancel Previous Next Cancel

Add Camera Wizard x Add Camera Wizard x

3 Video 4 Complete
General Basic Information
Name CamhiPro Camera
Video format: H.264
IP address 192.168.1.223
Audio format: G711
Port 8080
Stream Profile ！ Brand ONVIF

Stream 1 Camera model Generic_ONVIF

High quality:
Video
Balanced: Stream 1 ！
Video format H.264
Low bandwidth: Stream 1 ！
Audio format G711
Stream 1 High quality 2592x1944 e 15 FPS
Balanced 2592x1944 e 15 FPS
Resolution: 2592x1944
Low bandwidth 2592x1944 e 15 FPS
Frame rate(FPS): 15
Bitrate control: Variable
Image quality: 5 (Highest)

Previous Next Cancel Finish Cancel

25
Connect to QNAP
1

26
2 3
Add Search Network Camera
# IP Address Brand Camera Model Port MAC Address
Add a camera
1 192.168.1.8 ONVIF IPC-model 8899
This wizard guides you through the following settings: 2 192.168.1.16 ONVIF IPC-model 8899
3 192.168.1.17 ONVIF IPC-model 8899
· Camera Configuration
· Video Settings 4 192.168.1.19 ONVIF IPC-model 8899
· Schedule Settings 5 192.168.1.20 ONVIF IPC-model 80
6 192.168.1.21 ONVIF IPC-model 8899
Search camera(s) automatically
7 192.168.1.24 ONVIF ONVIF Profiles Cameras 8080

8 192.168.1.29 ONVIF IPC-model 8899

9 192.168.1.36 ONVIF ONVIF Cameras(Recording...) 80
10 192.168.1.38 ONVIF IPC-model 8899
11 192.168.1.43 ONVIF IPC-model 8899

Step 1/6 Next Cancel Search type: ONVIF OK Cancel

4 5
Add Add

Camera Configuration Video Settings

Channel: Channel 1 Video Compression: H.264

Camera Brand: ONVIF Resolution: 1920x1080
Camera Model: ONVIF Profiles Cameras Frame Rate: 15
Camera Name: Camera 1 Quality: Quality 3
IP Address: 192.168.1.24 Enable audio recording on this camera
Port: 8080 Enable manual recording
Test Minimum number of days recording files are kept 1 day(s)
RTSP Port: 554
WAN IP Address: Enable suto snapshot
Port: 80
RTSP WAN Port: 554
User Name: admin
Password:

Step 2/6 Back Next Cancel Step 3/6 Back Next Cancel

27
6 7
Add
Add
Confirm Settings
Schedule Settings
Enable schedule recording Please confirm the following information

Active: Inactive: Channel: Channel 1

Camera Brand: ONVIF
Camera Model: ONVIF Profiles Cameras
Camera Name: Camera 1
IP Address/Port: 192.168.1.24/8080
Recording: Enabled
Video Compression: H.264
Resolution: 1920x1080
Frame Rate: 15
Quality: Quality 3
Enable manual recording: Enabled

Step 4/6 Back Next Cancel Step 5/6 Back Next Cancel

8
Add

Add a camera
The new camera has been added successfully.

Step 6/6 Finish

28
 9
Channel Camera Name IP Address Status Recording Setting

Video Compression: H.264

Resolution: 1920x1080
？ Frame Rate: 15/14
Camera 1 192.168.1.24 Connected
Bit Rate: 1.3 Mbps
Channel 1 Quality: Quality 3
Recording Status: Recording

10 11

29
Connect to iSpy
1
Video Source
JPEG URL MJPEG URL FFMPEG (H.264) VLC Plugin Local Device Desktop XIMEA Kinect ONVIF Custom Clone
1.

Username admin Overide RTSP Port

Password

Network Address
········ Port 0

http://192.168.1.223.8080/onvif/device_service
http://192.168.1.223.8080/onvif/device_service
http://192.168.1.218.8080/onvif/device_service
http://192.168.1.193/onvif/device_service
http://192.168.1.129/onvif/device_service
http://ipaddress/onvif/device_service

Transport TCP
Connect with
FFMPEG

Next

IP Camera With Wizard Help Advanced Cancel OK

2 Video Source
JPEG URL MJPEG URL FFMPEG (H.264) VLC Plugin Local Device Desktop XIMEA Kinect ONVIF Custom Clone
2.
URL
2560x1920:rtsp://admin:[email protected]/11
800x600:rtsp://admin:[email protected]/12

Back

IP Camera With Wizard Help Advanced Cancel OK

30
3
Edit Camera(ID:2, DIR: KWARX)

Сamera Montion Detection Alerts Recording PTZ Images FTP Cloud Storage Scheduling Storage

Сamera Model ONVIF ... Get Latest ListTo Edit Reload

Preset 001
Preset 002
Preset 003
Preset 004
Preset 005
Preset 006
Preset 007
Preset 008
Preset 009
Preset 010
Preset 011
Preset 012
Preset 013

Note: You can control PTZ on the live camera

+ preset - preset
view by holding down the middle mouse
button.
Track Objects Scheduler

Exit this to enable alerts and recording Copy To Help Back Next Finish

31
Warranty & Support
Dear Users:
Thank You For Purchasing Boavision Products. In Order To Protect Your Rights, Please Read The Following Carefully After
Purchasing:

1. The Following Situations Do Not Belong To The Scope Of Free Maintenance

Please Note:
* Disassemble And Repair The Product Without Permission.
* Intentional Damage To The Product, Such As The Use Of Unsuitable Adapters, Mechanical Damage, Etc.
* Product Failure Or Damage Caused By Force Majeure Such As Earthquake, Fire, Flood, Lightning, Etc.

2. Technical Support&Software Upgrade Service:

Before You Return The Product, Please Contact Our After-Sales Team To Confirm Whether The Product Is Faulty. We Suggest
That You Provide Us With Photos Or Videos Related To The Problem By Email, And We Will Reply To You Within 24 Hours.

E-Mail: [email protected]. Phone: +1484-862-1346 (9AM-6PM EST Mon-Fri)

For More Software Download And Use Help For The You Can Also Follow Our Official Youtube Channel For
Product, Please Scan The QR Code Below Or Enter The More Product Guidance Videos.
URL To Access:
www.boavision.com/download.html

Scan QR Code
Visit Quick Start Video

boavision official

32
Trouble Shooting
Lssues Description
No. Solutions

Please make sure the camera is NOT connecting Ethernet cable,

press and hold the reset button on the cable for 20 seconds,
wait for 30 seconds, check in your phone WLAN settinge, there
Can not see the camera’s WiFi Signal
1 should be a WiFi signal named IPCAM-xxxxx, if still can not find
in phone WLAN setting
the wifi signal, quick press the reset button and wait for 20
seconds, there should be a wifi signal now, the format is IPCAM-
XXXXX.

1) Check your Wi-Fi name and password, if there is any

special character.
2) Make sure your WiFi is 2.4G, it does not support 5G.
2 Connection can not be established
3) Make sure your camera and mobile phone are near the router.
4) Email contact customer service staff to solve your problem
within 24 hours

1) Press and hold the reset button for 20 seconds.

3 Reset to default 2) Hear “Dong” sound, and wait for reboot

1) Reset camera
How to connect the camera to a 2) Delete the camera from Camhipro device list
4
NEW WIFI 3）Setup the camera as a new one

33
 1) Please try to adjust the camera position or direction,
make the camera further from the monitor area.
5 Alarm captures without a person 2) Some objects (Fly, Leaves, Dust) trigger the motion sensor,
please reduce the motion sensitivity, and adjust the monitor
area to avoid the false alarm area.

Please reduce the motion sensitivity, adjust the monitor

6 Alarm too frequent
area, setup schedule alarm time in advanced setting

Enable notification of the Camhipro app in the mobile

7 Cannot get alarm push
settings.

Please insert the micro SD card, make sure the sd card is

8 No alarm video recorded readable in sd card setting page (you can see the memory
size)

Check if the network works well, maybe the camera location

9 Device offline is too far from the router, move to a closer place and try

Check the WIFI network, the distance between the camera

10 Video delay
and the router should not be too far

Please check if your SD card is installed correctly, or replace

11 The camera keep rebooting or crashing with another brand new memory card (Class 10) and go
through the whole set up again.

Setup the correct time zone for your device

Why I can not find recorded video on
12 Select your Time Zone, and enable Daylight Saving Time, then
my play back
Click Saving Time Zone for Device.
34