AXIAL-FLOW

®
AXIAL-FLOW COMBINE HEADERS

COMBINE HEADERS
 AXIAL-FLOW COMBINE HEADERS
Corn Head | Draper Head | Grain Head | Pickup Head

DESIGNED TO MATCH THE CAPACITY OF AXIAL-FLOW COMBINES

Case IH header options deliver consistent performance and durability, regardless of crop or conditions,
allowing you to harvest more of what you grow. Just like the combines behind them, Case IH headers are
simple to set and adjust, intuitive to operate and help deliver the highest-quality grain to the hopper.

“ We liked it from the get go, it was easy to use, easy to make adjustments, and performed
well. It picks clean and feeds smoothly, with less than 1% loss. ”

Thomas Sandt, Lake Crystal, MN

2
AXIAL-FLOW COMBINE HEADERS

A Perfect Match. ����������������������������������������������� 4 – 5 3016 Series II Pickup Head.��������������������������� 18 – 19

4400 Series Corn Heads. ����������������������������������� 6 – 9 Support and Service. ������������������������������������� 20 – 21

FD2 Draper Heads ����������������������������������������� 10 – 15 Summary Specifications.����������������������������������22 – 23

2030 Rigid Auger Head.��������������������������������� 16 – 17 Product Specifications.����������������������������������� 24 – 27

3
 A PERFECT MATCH
Find your perfect flow of grain from the field to the bin with header options from Case IH. Maximize grain quality, minimize grain loss and improve profitability with a Case IH header
specifically engineered to match the capacity of your Axial-Flow combine. From industry-leading grain savings to exceptional retained value, Case IH headers are built to last and deliver a
better return on your investment. And with seven header series matched to the capacity of your combine, Case IH offers the broadest and most competitive lineup of headers in the industry.

RELIABILITY PRODUCTIVITY HIGH-EFFICIENCY FARMING

• To provide the highest-quality levels of reliability, • Case IH headers are designed for high-horsepower • At Case IH, our goal is to help you make the
Case IH extensively tests headers in both lab and field throughput and match capacity levels of most of every input and every season. It requires
conditions worldwide and in different crop types and Axial-Flow combines. breaking through the status quo and achieving
harvest conditions. the most efficient harvest possible with the best
SIMPLICITY use of land, seed, fertilizer and equipment.
GRAIN SAVINGS
• Case IH headers have fewer components and easy
• With fluctuation in today’s grain prices, harvesting setup and maintenance. This uncomplicated design
more of what you grow is critical and the standard to allows you to spend more time harvesting your crop.
which Case IH upholds when designing its headers.

4
5
 A large, open front-gathering chain sprocket sweeps stalks Pinching stalk rolls power feed the cornstalk directly Patented CornLouvers™ channel ears of corn and
efficiently into rolls and helps harvest downed cornstalks. into the path of the chopping blade and consistently any loose kernels into the auger to ensure loose
deliver a 3- to 6-inch chop length. grain makes it into the combine.

SETTING THE HARVEST BENCHMARK AND PIONEERING COMPATIBILITY WITH

4400 SERIES CORN HEADS

Case IH headers set the industry benchmark for corn harvesting and provide the greatest CASE IH CORN HEADERS ARE DESIGNED TO PICK CLEANER
return on your investment. The 4400 series corn heads are designed to harvest more
From the profile of the dividers and hoods to the length and speed of the stalk rolls, every
efficiently, better matching today’s higher-horsepower combines and faster harvest speeds.
aspect of the corn head is designed to cleanly pick and gently move ears into the feeder house.
From the stalk roll spirals, to the diameter and length of the stalk rolls, to the speeds of
the gathering chains and the gearboxes, the headers are carefully matched, allowing you • Pinching-style stalk rolls are designed to cleanly pull the stalks through the row unit and
to pick each kernel of corn at faster ground speeds and in adverse conditions. deck plates and gently snap the ear off the stalk to minimize grain loss.
• The deck plates are gently curved downward to minimize butt shelling and ear toss.
This helps save more grain and channel it into the auger trough.
• The pinching style stalk rolls pull the corn stalks and leaf material through the row unit
and allow the deck plates to cleanly snap the ear off the stalk. This reduces the amount
of stalk and leaf material being ingested into the combine.

6
Case IH offers folding corn heads in 8-row and 12-row Replaceable wear strips are easy to service, keeping Heavy-duty drives with aluminum gear case housing reduce
configurations. Capable of folding into transport mode in you in the field during optimal harvest windows. weight and increase strength by 20% for high-speed harvest.
less than a minute, folding heads dramatically improving
transport efficiency, and, ultimately, field productivity.

CORN HEAD MODEL 4406 4408 4408 4412 4412 4412 4416* 4416* 4418*
Folding Narrow Row Folding Narrow Row Narrow Row

30 in. (762 mm) / 20 in. (508 mm) / 20 in. (508 mm) /

Spacing 30 in. (762 mm) 30 in. (762 mm)
36 in. (914 mm) / 38 in. (965 mm) 22 in. (559 mm) 22 in. (559 mm)
Configuration Nonchopping / chopping

6088, 7088,
6130, 7130,
88, 130, 140, 150, 10, 20, 6140, 6150,
Combine Model 88, 130, 140, 8120, 9120, 8230, 9230, 8240, 8250,
230, 7140, 7150, 10, 20, 230, 240, 250 series
Compatibility 150 series 9240, 9250 series
240, 250 series 10, 20, 230,
240, 250
series†

†
88 / 130 / 140 Series with 12R Non-Chopping Headers. *Requires heavy-duty feeder drive. 7
 CASE IH CORN HEADERS:

WHERE HARVEST SPEED AND EFFICIENCY MEET

Increase grain quality and cover more acres each day with Case IH 4400 series corn heads. These corn heads are built with advanced features and deliver even
more productivity to help you keep the grain flowing. Plus, the durable header design reduces maintenance requirements so you spend more time in the field.

TAKE PRODUCTIVITY TO THE NEXT LEVEL THE 4400 SERIES CORN HEAD ADVANTAGE

• A narrow, smooth divider profile and flatter angle of the 4400 series dividers guarantee • Pick cleanly and optimize residue management with headers designed to ensure every
excellent picking ability in both standing and downed corn with minimal cob losses. kernel ends up in the hopper while the row unit efficiently processes the stalks.
• The stalk roll spiral is designed to smoothly and evenly feed the stalks of even the • Case IH 4400 series heads offer substantially increased harvest speeds of 3 to 6 mph
highest-yielding corn varieties into the row unit. and better match corn heads to your combine’s capacity and power.
• The Automatic Header Height Control (AHHC) provides smooth and consistent header • Available in standard or chopping configurations, the 4400 series chopping corn heads
height response in ever-changing field conditions, improving harvesting efficiency and offer rotating blades positioned under the stalk rolls that spin at 2,880 rpm and
reducing operator fatigue. provide consistent chop lengths of 3 to 6 inches. The stalk rolls power-feed the corn
• In-cab, hydraulically-adjusted deck plates allow operators to carefully match deck plate stalks directly into the path of the rotating blades, providing consistent chop quality
clearance to various corn varieties and conditions, enabling clean, efficient picking. even at faster ground speeds and higher plant populations. The chopping mechanism
can be disengaged on an individual row unit, allowing a quick transition from chop to
• A chain removal tool that makes quick and simple work of removing or replacing a nonchop when required.
gathering chain is now standard.
• Compared with leading competitive designs, Case IH corn heads optimize the
• All 4400 series corn heads can operate Hydraulic Spiral Dividers to gently lift and productivity of your Case IH Axial-Flow combine.
move stalks into the header in down and tangled crop conditions. The optional spiral
dividers can also be added as a field-installed attachment.

8
 NARROW ROW CORN
HEAD AVAILABLE

NARROW ROW CONFIGURATIONS DIVIDERS AND HOODS ROW UNIT AND CHOPPER DRIVES

• Available in 20- and 22-inch spacing for 12-, • New inner hoods and dividers for narrow row • Separate drives for choppers and row unit
16- and 18-row models. spacing and weight reduction. components provide more efficient power flow
• Reduced row unit weight (over 100 lb. per row) • New outer hoods to accommodate tall corn and torque management.
and a better center of gravity. attachment and auger divider. • Gearbox replaces chain drives for improved durability.
• Parallel linkage on hydraulic deck plates keep the
FRAME deck plates properly centered over the stalk rolls.

• Provisions to accommodate split

driveline architecture. CHOPPING

• Multiple configurations on same frame • All configurations are chopping capable.

and common tooling. • Includes chopper overload protection.
• Increase clearance to standing crop. • Choppers can be disengaged by flipping a
lever on each individual row.

9
 MACDON FD2 SERIES FLEXDRAPER

ACHIEVE UNMATCHED
HARVESTING EFFICIENCY
The MacDon FD2 series FlexDraper helps you maximize harvest productivity thanks to
a heads-first feeding design. This superior system lays the crop down to feed it smoothly
and evenly into the combine. This allows for faster ground speeds and is particularly
beneficial in tough, bushy crops and adverse conditions.

PRODUCTIVITY AND EFFICIENCY

• Maintain a close reel-to-cutterbar relationship, even at extreme flex, with a floating

three-section flexible header and double and triple reel configurations. The entire
header frame, cutterbar, and reel follow ground contours as a complete unit, flexing
up to 17 inches on either end.
• Achieve a clean, close, even cut every time. ContourMax™ Contour Wheels allow the
header to follow the field’s contours, leaving a consistent stubble height while cutting
up to 18 inches off-the-ground.
• The Active Float System supports up to 97% of the header’s weight, allowing you to
glide seamlessly over rises and divots.
• Perform clean, fast cuts and maximize your crop’s yield with the ClearCut High-Speed
Cutting System. A heavy-duty output shaft, direct hydraulic drive and flywheel for
smooth operation allow you to cut through the most challenging condition. In addition,
a longer blade and optimized knife shape delivers quick and clean cut quality, even
when running at high ground speeds.

10
11
 Prevent shatter on the ground with ShatterGuard Reel Positioning. A high speed cutting system delivers clean, consistent cuts at
Standard on all FD2 models, this adjustment is designed to handle up to 30% faster speeds.
tall, brittle and bushy crops.

HARVEST MORE OF WHAT YOU GROW

Get harvesting earlier and run later at night with the head-first feeding of Active Crop • A floating three-section flexible header with double and triple
Flow. Efficient even in damp and moist conditions, head-first feeding maximizes your reel configurations allows the header to closely follow ground
efficiency with better straw distribution for a smooth, consistent crop flow. contours — even in changing field conditions.
• The FD2 features up to 17 inches of flex range allowing you to
maximize crop recovery.
• A triple reel option features three reel sections that mirror the
flexing points of the header, giving you an even closer reel-to-
cutterbar relationship for smooth, consistent, heads-first feeding.
Available on 40 foot and standard on 45 and 50 foot FD2 models.
• Easily move from field to field at speeds up to 20 mph with the
EasyMove™ Transport System.

12
The FD2’s ClearCut High-Speed Cutting System delivers just that: An industry-exclusive low-speed transport system (25 mph or less)
a clean cut at faster speeds. allows the operator to deploy the transport package with the touch
Two knife guard options to consistently deliver clean, close cuts: of a button, saving time when moving from field to field.
• Pointed Knife Guards, multi-purposed and engineered to glide
over the field, even at high cutting speeds.
• PlugFree Knife Guards, designed to resist plugging in even the
toughest conditions while still delivering a close, clean shave.

• The FD2 is a multi-crop harvest solution. Switch easily from a flex to a rigid frame header
with a simple lever.
• A low-profile cutterbar minimizes seed loss by enabling a short distance from knife to draper.
• Knife drive, knife sections, and a choice of knife guards provide you the power, efficiency,
and durability needed to cut through even the most challenging conditions.
• An ultra-deep deck with 50-inch-deep drapers delivers up to 20% more capacity
while keeping even the toughest, bushiest high-volume crops moving smoothly with
consistent heads-first feeding.

13
14
BUILT TO HANDLE TOUGH CONDITIONS
Float over ground contours and cut through bushy crops in challenging conditions. Designed to provide you the
power and durability to efficiently harvest your crop, the FD2 is engineered to keep your combine moving.

A CLEAN CUT, EVERY TIME PICK UP ALL YOUR CROP MAKE HARVEST EASY

• ClearCut High-Speed Knife Drive provides more torque to • The FD2 reel features a uniquely shaped cam that • Conveniently stored onboard the header, the
power, allowing you to speed through cutting in even allows the fingers to get underneath lodged crop and Set-It-Right Multi-Tool lets you make regular
the most challenging conditions. pick it up before it’s cut. header and reel positioning quickly and easily.
• Achieve a faster, cleaner cut at high ground speeds with • In-cab header and reel controls allow you to adjust • Switch from a flex to a rigid frame header with a
ClearCut Knife Sections, featuring over 25% more cutting draper and knife angle and fore-aft reel positioning. simple flip of a lever.
surface thanks to a longer blade and improved geometry.
• From the cab, control side draper speed, header
• Choose from ClearCut Pointed Knife Guards and ClearCut tilt, ground pressure, reel position, and contour
PlugFree Knife Guards to customize your cutting system wheels for cutting height up to 18 inches.
to your operation’s field conditions.

15
 CUT MORE OF THE CROP YOU
GROW WITH A 2030 RIGID AUGER HEAD
The 2030 rigid auger head handles a wide variety of crops in diverse conditions, such as downed crop, tangled crops, uneven terrain and muddy soils.
The powerful and robust design delivers gentle cutting and feeding of the crop into the combine for increased grain savings and grain quality.

DURABLE TO THE MAX EVEN FEEDING EASY CUTTING

• The robust, rigid frame was developed using two • Six-bat reel design positively engages the crop, gently • Tough double-cast steel fingers are designed with
reinforced strengthening webs for better durability. lifting it over the cutterbar and across the auger floor. maintenance-free internal knife guides.
• Double-skin skid shoes assure long-term durability • Offset steel reel tines provide efficient pickup and • Spare knife sections are located under the left-hand
and reduced ground pressure, providing better flotation. are easy to replace. shield for quick and easy replacement.
• Header hookup is easy with single-point hydraulics, • A powerful hydraulic reel drive provides smooth
dedicated electrical connector and 60-degree even reel operation, even in heavy, green straw
free-rotation PTO shafts. and in high-yielding conditions that would typically
produce heavy reel loads.

16
17
18
YOUR IDEAL HARVEST TOOL
The 3016 pickup head is the ideal harvest tool for cereal grains, canola, beans, peas, lentils, grass seed and many other crops. It gently lifts swaths cleanly and smoothly with minimal seed loss.
The swath is transported gently on the belts to the combine’s feeder. The pickup belts cover the total width of pickup, assuring the gathering of all material without running over adjacent swaths. Extra picking
fingers increase the performance in tough conditions. Pickup belt speed can be adjusted to combine forward speed, and the swath remains intact until it reaches the rotor for threshing and separating.

PICKUP SWATHS IN VARYING CONDITIONS. • Optional castor gauge wheels help eliminate ground FLOAT OVER ROUGH TERRAIN.
scuffing and reduce frame stress when turning with
• Wide pickup belt lifts all crops, even those in • Standard mechanical suspension provides excellent
the header on the ground.
irregular windrows. picking frame flotation, maintains consistent ground
• Header height control adjusts the header with two pressure and prevents bouncing at higher speeds.
• Large diameter auger feeds high-density swaths sensors to lift crops and ensure smooth operation.
into the combine. • Optional cab-equipped hydraulic suspension allows the
This option is available in 12-foot grass seed and
• With 12-inch movement range, the pickup header operator to comfortably change the header to perfectly
15-foot small grains models.
guarantees excellent picking ability in rough terrain float over the soil for optimum harvest efficiency in
at speeds of 8 to 9 mph. changing conditions.
• Flexible pickup header which follows the ground
contours and maximizes the amount of grain picked up.

SIMPLE, PROVEN DESIGN

• A single PTO drive provides effective
and efficient power delivery.
• Header requires no daily maintenance.

19
20
SUPPORT AND SERVICE
Case IH headers are tough, reliable and engineered to perform. When it comes time to OFFERING FINANCIAL SOLUTIONS
purchase accessories, parts and service, turn to your Case IH dealer for genuine OEM FOR MORE THAN 50 YEARS
parts and certified service support.
CNH Industrial Capital’s extensive experience in the equipment industry has created
UNMATCHED SUPPORT a deep understanding of your unique needs. Competitive financing with flexible
payments can be timed to your cash flow. Or conserve capital and reduce upfront
Case IH factory-trained technicians keep you working. Their Case IH dealer technicians are payments with operating lease options. We can even help to protect your investment
factory-trained in the latest service and diagnostic techniques specifically for your Case IH with a variety of insurance and equipment protection products. There’s a financing
equipment. They can provide an important added dimension to maintenance — the option that’s perfect for the way you operate. CNH Industrial Capital can help you find it.
ability to spot signs of trouble early and fix them before they become costly problems.
YOUR GO-TO PARTNER FOR SERVICE
Only genuine Case IH parts were made for your machine and designed for peak
performance. At your Case IH dealer, find everything you need from filters, fluids, shop Whether you are prepping for harvest or are in the middle of harvest season, your
products and safety equipment to operators manuals, parts diagrams, paint and batteries. Case IH dealer is your go-to source for harvest. A Case IH Axial-Flow combine matched
with a Case IH header translates into one source for parts.

21
 THE GREATEST CHOICE OF HEADS
TO GIVE YOU THE GREATEST YIELDS
Simple, reliable Case IH head designs deliver consistent
performance and durability, regardless of crop or
conditions. Just like the combines behind them, Case IH
heads are simple to set and adjust, intuitive to operate and
help you deliver more high-quality grain to the tank. With
heads as wide as 50 feet, they deliver a steady stream
of grain to match the high capacity of machines like the
Axial-Flow 9250.

CORN HEADS

Case IH Corn Heads are designed to pick cleaner, harvest

faster, grab more down corn and save more grain. The
corn heads incorporate the latest innovations in harvest
technology, with features that maximize your time in the
field and minimize your yield loss.

Case IH 6 to 18 row corn heads – available in narrow or

folding configurations – provide increased corn harvesting
speeds and consistent chop lengths to help increase
productivity without sacrificing chop quality. Always made
in America.

SUB- SPACING
5088

6088
2588

9240
8240

9230

9250
8230
7088

8250
7240
7230

7250
6140
5140

7140

8010
2188

6130

6150

9120
5130

5150

7130

7150

8120
7010

7120
CORN HEADS ROWS CONFIGURATION
MODEL (IN INCHES)

4406 6 30, 36, 38           –  –    – – – – – – – – – – – –

4408 8 30, 36, 38                        –    

4400 Series
Corn Heads
4412 12 20, 22, 30 – – – – – –                      
Chopping /
4416 16 20, 22, 30
Non-choppping
– – – – – – – – – – – – – – – – – – – –        
4418 18 18, 20, 22 – – – – – – – – – – – – – – – – – – – –        
4400 Series 4408 8 30      –    –      – – – –         
Folding
Corn Heads 4412 12 30 – – – – – – – – – –  –  – – –            

22
GRAIN HEADS PICKUP HEADS DRAPER HEADS

The Case IH rigid auger grain head is designed to match The Case IH pick up head is ideal for small-grain Case IH draper heads offer both rigid and flexible
the high horsepower combines of today, offering faster harvesting like cereal, grass seed, and more. Our simple, cutterbar configurations, variable draper speeds, a wide
harvesting speeds and the adaptability to tackle different proven design helps minimize seed loss, while extra range of cutting widths, and a head-first feeding design
crop conditions effectively. It can handle a range of picking fingers and adjustable belt speeds allow for for unmatched harvesting efficiency.
challenging situations, including tangled and downed increased performance in tough conditions.
crops as well as uneven terrains.

OVERALL WIDTH
5088

6088
2588

9240
8240

9230

9250
8230
7088

8250
7240
7230

7250
6140
5140

7140

8010
2188

6130

6150

9120
5130

5150

7130

7150

8120
7010

7120
GRAIN HEADS CONFIGURATION
(IN FEET)

Rigid Auger Head 2030 17, 20, 24, 30      –    –   –   –  –     –    – 

Single Knife
Terraflex Auger Head 3020 20, 25, 30, 35           –                 
OVERALL WIDTH
5088

6088
2588

9240
8240

9230

9250
8230
7088

8250
7240
7230

7250
6140
5140

7140

8010
2188

6130

6150

9120
5130

5150

7130

7150

8120
7010

7120
PICKUP HEADS CONFIGURATION
(IN FEET)

12 1-piece belt                            
Pickup Head 3016
15 3-piece belt                            
OVERALL WIDTH
5088

6088
2588

9240
8240

9230

9250
8230
7088

8250
7240
7230

7250
6140
5140

7140

8010
2188

6130

6150

9120
5130

5150

7130

7150

8120
7010

7120

DRAPER HEADS CONFIGURATION

(IN FEET)

Macdon FD2 Series 25, 30, 35, 40, Hydraulic

FlexDraper 41, 45, 50 cutting knife
– – – – – –           – – –         

23
 4400 SERIES CORN HEADS 4406 4408 4408F 4412
GENERAL
Divider Type Hinged and floating
Plastic Yes
Metal No
Number of Rows 6 8 12
Row Spacing 30 in. (762 mm) / 36 in. (914 mm) / 38 in. (965 mm) 30 in. (762 mm)
Number of Gathering Chains 12 16 24
Type of Chain Endless special chromed pins
OVERALL DIMENSIONS
Width (Max. Row Spacing)
30 in. (762 mm) 16 ft. (4 870 mm) 21 ft. (6 394 mm) 31 ft. (9 442 mm)
36 in. (914 mm) 18 ft. 8 in. (5 682 mm) 24 ft. 8 in. (7 511 mm) N/A
38 in. (965 mm) 19 ft. 2 in. (5 836 mm) 25 ft. 6 in. (7 766 mm) N/A
Height (Level Ground) 4 ft. 2 in. (1 258 mm)
Length with Dividers 9 ft. 11 in. (3 010 mm)
Length without Dividers 7 ft. 6 in. (2 272 mm)
WEIGHTS
Approximate Weight — Non Chopping Header
30 in. (762 mm) 3,988 lb. (1 809 kg) 5,484 lb. (2 488 kg) 6,726 lb. (3 051 kg) 8,058 lb. (3 655 kg)
36 in. (914 mm) 4,288 lb. (1 945 kg) 5,837 lb. (2 648 kg) N/A
38 in. (965 mm) 4,290 lb. (1 946 kg) 5,842 lb. (2 650 kg) N/A
Chopping Units Add an Additional 75 lb. / row
ROW UNITS
Point-to-Point Knife Type Stalk Rolls Standard
Number of Knives per Roll 4 - single edge
Weed Knives (Single Piece) Adjustable
Row Unit Drive Enclosed in gearbox – spur / bevel gears
Stalk Roll Length 23.4 in. (594 mm)
Stalk Roll Diameter 4.25 in. (108 mm)
Stalk Roll Speed (Nominal) 1,058 rpm
Gathering Chain Speed (Nominal) 349 fpm
SLIP CLUTCHES
Row Units 1 per row radial pin
Auger Drive 1 per auger radial pin
STRIPPER PLATES
Hydraulic Hydraulic adjustable
Stalk Stompers (Available Through Part Marketing) Optional
Automatic Front Height Control / Lateral Tilt Optional / pre-wired in main harness
HEADER DATA
Header Jackshaft Speed
4400 CH on 7010 / 8010 / 20 Series 575 rpm
Auger Diameter 15.75 in. (400 mm)
Auger Tube Dimension 6.3 in. (160 mm)
Flighting Pitch 19.7 in. (500 mm)
Reverse Flighting No

24
4400 SERIES CORN HEADS 4412 NARROW ROW 4412F 4416 4416 NARROW ROW 4418 NARROW ROW
GENERAL
Divider Type Hinged and floating
Plastic Yes
Metal No
Number of Rows 12 16 18
Row Spacing 20 in. (508 mm) / 22 in. (559 mm) 30 in. (762 mm) 20 in. (508 mm) / 22 in. (559 mm)
Number of Gathering Chains 24 32 36
Type of Chain Endless special chromed pins
OVERALL DIMENSIONS
Width (Max. Row Spacing)
20 in. (508 mm) 22.1 ft. (9 442 mm) N/A 27.8 ft. (8 484 mm) 31.2 ft. (9 500 mm)
22 in. (559 mm) 23 ft. (7 010 mm) N/A 30.3 ft. (9 246 mm) 34 ft. (10 363 mm)
30 in. (762 mm) N/A 30 ft. 11 in. (9 410 mm) 42.5 ft. (12 954 mm) N/A
36 in. (914 mm) N/A N/A
38 in. (965 mm) N/A N/A
Height (Level Ground) 4 ft. 2 in. (1 258 mm) 4 ft. 7 in. (1 338 mm) 4 ft. 2 in. (1 258 mm)
Length With Dividers 9 ft. 4 in. (2 870 mm) 9 ft. 11 in. (3 010 mm) 9 ft. 4 in. (2 870 mm)
Length Without Dividers 7 ft. 9 in. (2 405 mm) 7 ft. 6 in. (2 272 mm) 7 ft. 9 in. (2 405 mm)
WEIGHTS
Approximate Weight
7,231 lb. (2 725 kg) / 7,860 lb. (3 535 kg) / 8,697 lb. (3 915 kg) /
20 in. (508 mm) Standard / Chopping N/A N/A
7,931 lb. (3 597 kg) 9,363 lb. (4 217 kg) 10,469 lb. (4 719 kg)
7,360 lb. (2 774 kg) / 8,145 lb. (3 665 kg) / 8,820 lb. (3 971 kg) /
22 in. (559 mm) Standard / Chopping N/A N/A
8,530 lb. (3 869 kg) 9,944 lb. (4 481 kg) 10,646 lb. (4 799 kg)
30 in. (762 mm) N/A 9,686 lb. (4393 kg) 11,515 lb. (5 223 kg) N/A
36 in. (914 mm) N/A
38 in. (965 mm) N/A
Chopping Units Add an Additional 75 lb. / row
ROW UNITS
Point-to-Point Knife Type Stalk Rolls Standard
Number of Knives per Roll 4 - single edge
Weed Knives (Single Piece) Adjustable
Row Unit Drive Enclosed in gearbox – spur / bevel gears
Stalk Roll Length 23.4 in. (594 mm)
Stalk Roll Diameter 4.25 in. (108 mm)
Stalk Roll Speed (Nominal) 1,062 rpm 1,058 rpm 1,062 rpm
Gathering Chain Speed (Nominal) 348 fpm 349 fpm 348 fpm
SLIP CLUTCHES
Row Units 1 per row radial pin
Auger Drive 1 per auger radial pin
STRIPPER PLATES
Parallel linkage; hydraulic
Hydraulic Hydraulic adjustable Parallel linkage; hydraulic adjustable
adjustable
Stalk Stompers (Available Through Part
Optional
Marketing)
Automatic Front Height Control / Lateral Tilt Optional / pre-wired in main harness
HEADER DATA
Header Jackshaft Speed
4400 CH On 7010 / 8010 / 20 Series 575 rpm
Auger Diameter 15.75 in. (400 mm)
Auger Tube Dimension 6.3 in. (160 mm)
Flighting Pitch 19.7 in. (500 mm)
Reverse Flighting No

25
 GRAIN HEADERS 2030 RIGID AUGER HEADER 3020 FLEXIBLE AUGER HEADER 3152 RIGID DRAPER HEADER 3162 FLEXIBLE DRAPER HEADER
CUTTER BAR
25, 30, 35, 40, 45 ft.
Cutting Widths 17, 20, 24, 30 ft. (5.1, 6.1, 7.62, 9.14 m) 20, 25, 30, 35 ft. (6.1, 7.62, 9.14, 10.6 m) 30, 35, 40, 45 ft. (9.14, 10.6, 12.2, 13.7 m)
(7.62, 9.14, 10.6, 12.2, 13.7 m)
WEIGHT – APPROX.
17 ft. (5.1 m) 2,998 lb. (1 360 kg) 4,242 lb. (1 924 kg) NA
20 ft. (6.1 m) / 21 ft. (6.4 m) 3,351 lb. (1 520 kg) 4,242 lb. (1 924 kg) NA
24 ft. (7.3 m) 3,880 lb. (1 760 kg) N/A
25 ft. (7. m) N/A 5,302 lb. (2 405 kg) 5,212 lb. (2 364 kg) NA
30 ft. (9.1 m) 4,982 lb. (2 260 kg) 6,362 lb. (2 886 kg) 6,255 lb. (2 837 kg) 7,620 lb. (3 456 kg)
35 ft. (10.6 m) N/A 6,760 lb. (3 066 kg) 8,250 lb. (3 742 kg) 8,680 lb. (3 937 kg)
40 ft. (12.2 m) N/A N/A 8,720 lb. (3 955 kg) 10,400 lb. (4 717 kg)
45 ft. (13.7 m) N/A 10,200 lb. (4 626 kg) 11,170 lb. (5 066 kg)
AUGER
Diameter 24 in. (610 mm) 26 in. (660 mm) 16 in. (406 mm)
Speed Std. 178 rpm/Opt. 152 rpm Std. 147 rpm/Opt. 164 rpm 147 rpm
Full Fingered Standard Standard 25, 30 and 35 ft. Yes
REEL
Reel 6 bat N/A Cam action
Pickup Reel (Tines) Steel 6 (plastic or steel) 6 bat plastic or steel, split on (40 and 45 ft. heads)
Diameter 42 in. (1 067 mm) 42.1 in. (1 070 mm)
Drive Hydraulic / 12 to 60 rpm Hydraulic / 5 to 61 rpm Hydraulic/ 0 to 60 rpm
SICKLE/KNIFE
Type Overserrated “sta-sharp”/ “super sta-sharp” Overserrated, bolt sections
Drive Section to wobble box Hydraulic center knife drive
Knife Std. 3 in. (76.2 mm)

PICKUP HEADERS 3016 GRASS SEED SPECIAL 3016 GRAIN

FLOATING AUGER
Actual Pickup Widths 12 ft. (3.7 m) 15 ft. (4.6 m)
Diameter 26 in. (660 mm) 26 in. (660 mm)
Speed 187 rpm (160 Opt) 187 rpm (160 Opt)
PICK-UP
Drive – RPM Hydraulic
Wind Guard Lift Hydraulic
WEIGHT WITH BELT PICKUP
12 ft. (3.7 m) Width 3,090 lb. (1 401 kg) N/A
15 ft. (4.6 m) Width N/A 3,180 lb. (1 442 kg)
DRAPER BELTS – 19 IN. (48.3 CM)
14 ft. (4.27 m) Width 8 8
16 ft. (4.9 m) Width 10
WIDTH
Overall Width to Tire Edges 13.5 ft. (4.11 m) 16.5 ft. (5.0 m)

26
27
SAFETY NEVER HURTS!™ Always read the Operators Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs, and use any safety features
provided. CNH Industrial America LLC reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold.
Specifications, descriptions and illustrative material herein are as accurate as known at time of publication, but are subject to change without notice. Availability of some models and equipment builds varies according to the
country in which the equipment is used.

©2023 CNH Industrial America LLC. All rights reserved. Case IH is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Any trademarks
referred to herein, in association with goods and/or services of companies other than CNH Industrial America LLC, are the property of those respective companies. Printed in U.S.A. www.caseih.com CIH23060501