Keyboards for

vending machines
The easiest solution for
repair and replacement

e
selezion
e
special
Keyboards for
vending machines

The easiest solution for repair and replacement

To support you in the maintenance of keyboards, we present three different
solutions for you to choose from.

This aims to reduce the replacement cost by a third and minimize the waste of
plastic components, with components 100% made in Italy.

Here are all the combinations available:

COMPLETE VERSION NO-BOARD VERSION MEMBRANE-ONLY

Complete with plastic support, membrane push- With plastic support and membrane Membrane-only version,
button panel and electronic board push-button panel, without electronic without plastic support and
board. electronic board.

But there’s more!

We customized the membrane keyboards to provide with the brand-new FLATIN models.

What are FLATIN models?

Older models of the machines need the membrane with the flats INVERTED respect to the more
recent machines.
With this solution you will be able to replace the membrane regardless of the machine model,
without having to purchase the complete version of the keyboard.

Not sure which model is suitable for your machines?

Contact our technical support! We will be happy to help you.
[email protected]

4
 ADHESIVE MEMBRANES:
instructions for gluing and
connector insertion

The membrane must be glued to the support in accordance with the following instructions:

Positioning and gluing (after thorough cleaning of the gluing surface)

This operation must be carried out progressively

so as to avoid the formation of air bubbles
between the membrane and the support, taking
care not to bend the keyboard too sharply along
the gluing line.

It is recommended to apply the glue at a room

temperature above 12 degrees;

Adhesion to the support will occur no sooner

than 12 hours.

Connector Insertion Instructions

The insertion of the connector to the ZIF must be carried out in accordance with the following recommendations:

It is recommended to insert the flat cable in the correct pin It is recommended to insert the flat cable to the zif connector
direction. avoiding bends/curves to safeguard good functionality.

5
NECTA
Opera, Concerto

255834 265546 265546N 255834N

OEM KEYBOARD COMPLETE OEM CAPACITIVE KEYBOARD OCM CAPACITIVE KEYBOARD OCM ADHESIVE MEMBRANE
WITH ORIGINAL ELECTRONIC WITHOUT BOARD WITHOUT BOARD KEYBOARD
BOARD
with plastic support and with plastic support and WITHOUT electronic board
Complete version with plastic membrane push-button panel. membrane push-button panel. WITHOUT plastic support
parts, membrane push-button WITHOUT electronic board WITHOUT electronic board
panel and electronic board for NECTA Opera, Concerto
for NECTA Opera, Concerto for NECTA Opera, Concerto
for NECTA Opera, Concerto

255834NFLATIN

OCM CAPACITIVE KEYBOARD

WITHOUT BOARD WITH
INVERTED FLATS

WITHOUT electronic board

WITHOUT plastic support

for NECTA Opera, Concerto

6
 NECTA
Brio Up & Melodia

260835 0265547 262784N 262784NFLATIN

OEM KEYBOARD COMPLETE OEM CAPACITIVE KEYBOARD OCM CAPACITIVE KEYBOARD OCM CAPACITIVE KEYBOARD
WITH ORIGINAL ELECTRONIC WITHOUT BOARD WITHOUT BOARD WITHOUT BOARD WITH
BOARD INVERTED FLATS
con supporto in plastica e with plastic support and
Complete version with plastic pulsantiera a membrana. membrane push-button panel. with plastic support and
parts, membrane push-button SENZA scheda elettronica WITHOUT electronic board membrane push-button panel.
panel and electronic board WITHOUT electronic board
for NECTA Brio Up for NECTA Brio Up
for NECTA Brio Up for NECTA Brio Up

NE
W!

260835N 260835FLATIN 10060623

OCM ADHESIVE MEMBRANE OCM CAPACITIVE KEYBOARD DISPLAY FOR KEYBOARD

KEYBOARD WITHOUT BOARD WITH
INVERTED FLATS display only
WITHOUT electronic board
WITHOUT plastic support WITHOUT electronic board for NECTA Brio Up
WITHOUT plastic support
for NECTA Brio Up
for NECTA Brio Up

255695 0265548 255695N

OEM KEYBOARD COMPLETE OEM CAPACITIVE KEYBOARD OCM ADHESIVE MEMBRANE

WITH ORIGINAL ELECTRONIC WITHOUT BOARD KEYBOARD
BOARD
with plastic support and WITHOUT electronic board
Complete version with plastic membrane push-button panel. WITHOUT plastic support
parts, membrane push-button WITHOUT electronic board
panel and electronic board for NECTA Melodia
for NECTA Melodia
for NECTA Melodia

7
Atel S.r.l con socio unico. Via Selvuzzis, 51/2 - 33100 Udine
Tel. +39 0432 602095, Fax +39 0432 602501
[email protected] – www.atelitalia.com – www.repagroup.com
Partita IVA : 00262130305, REA UD 126212
Capitale sociale: € 95.000 i.v.
Società soggetta a direzione e coordinamento di REPA Holding GmbH

www.repagroup.com