Scribd
Upload
496 views4 pages

BT LVL 5 245 TD

Uploaded by

hodbce
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
496 views4 pages

BT LVL 5 245 TD

Uploaded by

hodbce
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

KITALE NATIONAL POLYTECHNIC.

INTERNAL EXAMS
DEPARTMENT: BUILDING AND CIVIL ENGINEERING

Subject Code :
Qualification : Building Technician Level 5 245
Unit Code : CON/OS/BUT/BC/CU/02/5/A
Unit of Competency : Apply Technical Drawing
COPIES; 25

NOV/DEC 2024 SERIES


DATE: ................................... TIME: 2HRS

Instructions:

1. Attempt all questions;


2. No smart devices are allowed in the examination room;
3. Do not write on the question paper
ANSWER ALL QUESTIONS ON THE ANSWER SHEET PROVIDED

SECTION A (40 MARKS)

1. Define the term; Draughtsman, (2mrks)


2. Sketch the symbols for first and third angle projection (2mrks)
3. Why is a pencil rotated while drawing a long line? (2Mrks)
4. Construct the following angles;
i. 30ᵒ (2 Marks)
ii. 105ᵒ (2 Marks)
iii. 135ᵒ (3 Marks)
5. Construct isosceles triangle whose altitude is 55mm and perimeter 130mm.
(6 Marks)
6. List out five information to be contained in title block. [5mks]
7. Construct a regular heptagon using the universal method (7 marks)
8. Draw the following types of lines to a length of 100mm each.
i. Centre line, (1 Mark)
ii. Border line, (1 Mark)
iii. Hidden line, (1 Mark)
9. Highlight uses of the following drawing instruments used in engineering
drawing.
i. T-square. (1mrk)
ii. Drawing board (1mrks)
iii. Setsquares (1mrks)
iv. Masking tape (1mrks)
v. Mini-draughter (2mrks)

SECTION B 60 MARKS
Attempt all questions
1. Construct an isosceles triangle given the perimeter (160mm) and the
altitude (55mm)(5mrks)
2. Construct a regular heptagon using the universal method (7mrks)
3. Construct an angle of 22.5 degrees without using a protractor (2mrks)
4. Drop a perpendicular from a point to a line AB of 60mm (2mrks)
5. A triangle ABC has sides whose lengths are AB= 100 mm, BC= 75 mm and
AC= 100 mm.
I. Construct the triangle.
II. Circumscribe the triangle
III. Inscribe the same triangle. (9marks)
6. Figure 1 shows an object in isometric projection.

Draw, in third angle orthographic projection,


i. The front elevation in the direction of the arrow
ii. The side view from end (a)
iii. The plan (15 Marks)
2. Figure 2 below shows an isometric block. Draw the following in first angle
projection:
a) A front elevation in the direction of arrow A
b) An end elevation in the direction of arrow B
c) A plan
- Show hidden details
- Insert six major dimensions (20 Marks)
Figure 2

LAST PRINTED PAGE

(Assessor ,Kelvin)

You might also like