B2B Connector C926 FAULTS FINDING CHART Antenna pad

If damaged, no display, no ringing,

no speech, no vibration, status Antenna Switch Module
LED doesn't’t work.
If damaged, cause transmitted or
RF Transceiver (MT6119) received problem.

If damaged, cause transmitted or SAW Filter

received problem.
If damaged, cause received
problem.
VCTCXO (26MHz)
If damaged, power on fail. RF Power Amplifier (RF3140)
If damaged, transmission fail.
TXVCO
If damaged, transmission fail. 32KHz Crystal
If damaged, power on fail.
Baseband Processor (MT6205B)
Power Manager IC (MT6305)
If damaged, power on fail, no
display, no network, check the If damaged, power on fail,
schematic for more detailed. charging fail, SIM insert, no
vibration, no keypad backlight.
Memory
SIM Connector
If damaged, power on fail.
If damaged, SIM insert.
Audio Amplifier
Battery Connector
If damaged, no ringing, no alarm.
If damaged, power on fail, power
down, charging error.
Golden Capacitor
If damaged, time information reset Fuse and FET
I/O Connector
when battery removed.
If damaged, charging problem.
If damaged, charging problem,
software download problem.
B2B Connector C926 FAULTS FINDING CHART
If damaged, no display, no ringing,
no speech, no vibration, status
LED doesn't’t work.

B2B(Board to Board) connector is

the bridge of main board and LCM,
it include the connection of main
LCD, sub LCD, Receiver, Loud-
Speaker, Vibrator, and Tri-LED.
So one of this connection has
problem, it will cause the no
function to those modules on the
LCM.
 C926 FAULTS FINDING CHART

RF Transceiver (MT6119)
If damaged, cause transmitted or
received problem.

The RF transceiver MT6119 is a

highly integrated chip, it use to
modulate transmitted and
demodulate received signal.
 C926 FAULTS FINDING CHART

VCTCXO (26MHz)
If damaged, power on fail.

The VCTCXO is a 26MHz clock

source to the Baseband processor,
the processor can’t work without
the clock signal.
 C926 FAULTS FINDING CHART

TXVCO
If damaged, transmission fail.

The TXVCO is an voltage control

oscillator, transmitted signal mix
here.
 C926 FAULTS FINDING CHART

Baseband Processor (MT6205B)

If damaged, power on fail, no
display, no network, check the
schematic for more detailed.

Baseband processor plays the role

of system control, all the external
and on-chip modules are control by
the processor.
 C926 FAULTS FINDING CHART

This is a 64Mbit+8Mbit flash

memory, 8Mbit is the SRAM, the
software is store in the 64Mbit
flash ROM.

Memory
If damaged, power on fail.
 C926 FAULTS FINDING CHART

This is the audio amplifier for

loud-speaker, output for ringing,
and alarm.

Audio Amplifier
If damaged, no ringing, no alarm.
 C926 FAULTS FINDING CHART

The golden capacitor is the power

supply to RTC block, the RTC
block is on-chip block of Baseband
processor, it provide the time
information. In normal state the
battery will provide power supply
and charging the capacitor. When
remove the battery, the golden
capacitor will still supply to the
RTC block, so the time
information will keep.

Golden Capacitor
If damaged, time information reset
when battery removed.
 C926 FAULTS FINDING CHART

The I/O connector is 18 pin I/O Connector

connector for charge and software If damaged, charging problem,
download. software download problem.
C926 FAULTS FINDING CHART

The fuse and FET is for charge

control, fuse is use for safety, the
FET is use to control the charging
current.

Fuse and FET

If damaged, charging problem.
C926 FAULTS FINDING CHART

There are 4 battery connection pins,

from the left to right, they are
Btemp, GND, GND, Positive.
Btemp is the battery temperature
detection pin.

Battery Connector
If damaged, power on fail, power
down, charging error.
C926 FAULTS FINDING CHART

The solder problem, and dirty pin

will cause the SIM Insert.

SIM Connector
If damaged, SIM Insert.
C926 FAULTS FINDING CHART

MT6305 provide 7 dedicated

power supply output to the
Baseband system, it also provide
SIM level shift, so it can support
SIM card with different voltage.
The MT6305 also provide charge
control, backlight drive and
vibrator drive.

Power Manager IC (MT6305)

If damaged, power on fail,
charging fail, SIM insert, no
vibration, no keypad backlight.
C926 FAULTS FINDING CHART

The 32KHz is the clock source for

RTC block, when system work in
sleep mode, the 26MHz clock will
turn off, so it can reduce the power
consumption. So the 32KHz is one
of the system clock, without this
clock signal, system could not
work.

32KHz Crystal
If damaged, power on fail.
C926 FAULTS FINDING CHART

RF Power Amplifier (RF3140)

If damaged, transmission fail.

The RF Power Amplifier is a dual-

band amplifier for transmitted RF
signal. The signal word in
900MHz or 1800MHz frequency
band.
C926 FAULTS FINDING CHART

SAW Filter
If damaged, cause received
problem.

There are 2 SAW filter for

different frequency band, it is the
filter for receiver circuit.
C926 FAULTS FINDING CHART

Antenna Switch Module

If damaged, cause transmitted or
received problem.

The ASM is use to switch the

received and transmitted signal,
and also switch the different
frequency band signal.
C926 FAULTS FINDING CHART Antenna pad

Dirty pad will cause poor signal..

 Hall Sensor
If damaged, flip detection fail.
Key Pad LED
If damaged, no keypad backlight. Hall sensor use to detect the flip
open and close, it is a magnetic
detection system.
This is the LED for keypad
backlight, LED is a diode, you
should pay attention to the pin
indication.

This type of microphone is

different from the coil, it need
power supply to work. In factory
mode you can active the Echo loop,
to check the output voltage at the
microphone.

Microphone
If damaged, fail to send voice
signal.