HIL/1631/A/195 07.10.

2024

TO,
Sr. Manager (E) ED-1,
UPSIDA Kanpur U.P

Project Name : Boq For " Beautification & Illumination of 100 mtr rotary with three year maintenance
at Trans Ganga City Unnao”

Project Name:.
[Combined Abstract of Cost]
Unit
S.No. Item Description Unit Qty. Amount
Price
Supply Installation Testing & Commissioning of Step Light for
highlighting the architectural elements Having the Minimum
wattage 7W-9W with 120° beam angle with Pressure die-cast
aluminium housing for sturdiness, excellent corrosion resistant
and efficient thermal management grey finish with IP-66,,High
efficiency long life LED SMD with Ra>80, lumen efficacy of
>140 lm/W and viewing angle of 120° to ensure better
1 uniformity of light distribution. Minimum 180 Lumen output at Nos 280 5600 1568000 MR
3000K CCT,PF->0.95,THD-<10,CRI->80, Average Burning
Hours Life-50000Hrs at L70B50, Built-in potted electronic
LED driver with APFC, (SMPS based constant current supply),
lower THD, Open Circuit Protection, over Voltage protection,
Surge Voltage Protection upto 3.5kV & other safety test as per
IS 15885 Part-2/Sec 13. Fixture Length to be 196 mm ±1%,
width 129 mm ±1% , height 85 mm ±1%.
SITC of exterior rated Architectural LED flood lighting
luminaire,CCT should be 2700-3000k, suitable for facade
lighting with Pure polyester powder coated die-cast aluminium
housing in grey finish with aesthetically designed heat sink for
efficient thermal management, sturdiness & excellent corrosion
resistant. M16 gland is used for cable entry. Total System
wattage not exceeding 50W-55W with system lumen output
should be more than 5400 lm with all LEDs on. PC reflector
for maximum light output. PC lens used for symmetric
dictribution. Tempered protective toughened glass, thermal
2 Nos. 18 6700 120600 MR
shock
and impact resistant (IK-07) fixed to the housing with
aluminium frame and SS screws (For detailed Photometric
data, please refer (LM79 report & IES file). Fixture should
have Height 200 mm±1% including surface mount base and
widhth 56 mm±1% with constant locking hinges for simple
position control from various angles without special tools.
Fixture shall be suitable to operate at an ambient temperature
range of -10°C to 45°C and complete luminaire shall be IP66
and IK07 rated. LED Life time shall be at least L70B50 @

HAVELLS INDIA LTD.

Registered Office: 904,9th Floor Surya Kiran Building,
K.G.Marg,Connaughtplace,New Delhi-110001.(INDIA)
Customer Care: Toll Free 1800 11 0303 (MTNL/BSNL), 011 -41660303 (Landline)

CLASSIFICATION | PUBLIC
 50000 burning hours. LED should be of make Nichea, Osram,
Cree, Lumiled only. Luminaire shall be complete with
integrated BIS IP 66/67 Built-In Potted, isolated electronic
LED driver (SMPS based constant current supply) with lower
THD, Output Open / Short Circuit protection, Over Voltage
protection, Surge Voltage Protection upto 6kV (30W)/ 10kV
(50W) & other safety test as per IS 15885 Part-2/Sec 13.with
power factor > 0.95 and THD <10. The product should be BIS
approved with R number mentioned on product label. To be
supported with Product test reports - LM79, BIS Report and
LEDs Test Reports. Luminaire shall be conforming to As per
IS 16107 Part 2/sec1 and 16103 Part 2, cl no. 7, and clause 8.1
and shall be complete with all necessary accessories required
for proper working of fixture including weather proof
connection cables, water proof connectors etc. as required.
Annual maintenance of 100 mtr rotary for three year including
3 year 3 95000 285000 MR
cost of cable , lug, gland etc in all respect.
Total Part (A) 1973600
Electrical Items
Supply installation commissioning of following sizes of power
1
and data cable as mentioned: Remark
a) 3 x 2.5 sqmm Cu unarmored multistrand Mtr 1000 195 195000 MR
b) 4 x 16 sqmm Al armoured as per UPPWD 501(i) Mtr 500 173 86500
Supply and fixing of brass nickle plated compression gland for
PVC insulated & armoured served sheathed, underground cable
2 including rubber ring etc. complete in all respect. The
armouring of the cable shall be properly
connected with the earth.
a) 16 sqmm as per UPPWD 503(i) Nos 4 87 348
Supply and fixing of plain or pin type copper tin plated cable
3 socket ( lug ) to the cable leads, insulating with tape and
making connection etc.
a) 4 sqmm as per UPPWD 504(a) Nos 168 17 2856
b) 16 sqmm as per UPPWD 503(d) Nos 16 21 336
Supply and fixing of horizontal air termination (roof
4 conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface Mtr 50 90 4500
complete in all respects
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip
Galvanized), Length up to 3000mm, outer Dia 50 mm inner
Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and
inner GI pipe of 12 swg with Hot Dip Galvanization up to 100
5 Nos 2 10040 20080 MR
micron filled with crystalline conductive mixture (CCM)
having anti corrosive & conductive property with 50 kgs
activated soil (BFC) capable of reducing the soil resistivity
with good mixture of retaining capacity
6 a) Cable Entry Junction Boxes IP66 HENSEL cat Ref DK0606 Nos 10 1200 12000 MR
b) IP-67/68 Junction Box for Fixture connection Nos 25 2300 57500 MR
Synthetic Glands with Lock Nut Cat ref: 1545.25.17 +
7 Nos 200 59 11800 MR
8220.40

HAVELLS INDIA LTD.

Registered Office: 904,9th Floor Surya Kiran Building,
K.G.Marg,Connaughtplace,New Delhi-110001.(INDIA)
Customer Care: Toll Free 1800 11 0303 (MTNL/BSNL), 011 -41660303 (Landline)

CLASSIFICATION | PUBLIC
 Supply, installation, testing and commissioning of cages for
protection of light fixtures of suitable size made of stainless
8 steel 304 grade having wire mesh with spacing of 1.5 - 2 Nos 18 3500 63000 MR
inches and sturdy to avoid ohysical damage with base frame
being made of 4 mm thick strip
Supply, installation, testing and commissioning of PVC Pipe of
9 size 20 mm as per requirement for cable layingand its Mtr 1000 62 62000 MR
protection.
Supply, installation, testing and commissioning of PVC Pipe of
10 size 40 mm mm as per requirement for cable layingand its Mtr 500 114 57000 MR
protection.
Supply, installation, testing and commissioning of Electrical
panel with Servo Bypass swith on incomer having 63 A
MCCB with Surge Protection Device for all phases with
11 Nos 1 70000 70000 MR
minimum 6 No outgoing of 6 A DP MCCB A compartment
having two switches for safekeeping the controller and other
necessary equipments.
Supply, installation, testing and commissioning of Oil Cooled
Servo Stabilizer of 10 KW Three Phase with Enclosure and
12 connection to the main panel. with rating of 180-250 V Nos 1 175000 175000 MR
stabilizong and maintaining a fixed voltage output of 220Volt
for the entire system.
TotalPart (B) 817920
Part
Total 2791520
(A+B)
GST extra as applicable

Note: T&C :
*GST extra as applicable
*The Company will provide technical support for positioning of the fixtures as required at site,
Installation will done by our authorized Contractor or CP.
*Warranty: 3 Years only at fixtures. (Against manufacturing Defects)
The Company will provide the facility of ON- Site Service against manufacturing Defects “Fixtures Only”.
Thanking you and assuring you of our best services.

Yours Truly,

For Havells India Limited

HAVELLS INDIA LTD.

Registered Office: 904,9th Floor Surya Kiran Building,
K.G.Marg,Connaughtplace,New Delhi-110001.(INDIA)
Customer Care: Toll Free 1800 11 0303 (MTNL/BSNL), 011 -41660303 (Landline)

CLASSIFICATION | PUBLIC