Instruction Manual

USER MANUAL

Custom mecanical keyboard with gasket mount design

75% 5-Pin Hot Swap RGB VIA Tri-Mode

SPECIFICATIONS
MODEL: QwertyKey 75 CONECTIVITY: Type-C Wired, Wireless 2.4 & Bluetooth
KEY NUMBER: 80 + 1 Knob NKRO in all modes
STRUCTURE: Gasket mounted POLLING RATE: 1000hz in Type-C Wired & Wireless 2.4G
STABILIZERS: Plate-mounted COMPATIBILITY: WINDOWS/MAC
PCB TYPE: Hotswap 3/5 pin, full RGB, South facing DIMENSION: 325 x 135 x 30 mm
BATTERY CAPACITY: 4000mAh WEIGHT: 1 kg
PLATE MATERIAL: Polycarbonate
WINDOWS SHOTSCUTS

FN + F1 Screen Brightness - FN + F5 Calculator FN + F9 Next Track FN + A Windows

FN + F2 Screen Brightness + FN + F6 Media Player FN + F10 Mute FN + S MAC OS

FN + F11 Volume -
FN + F3 My Computer FN + F7 Previous Track FN + WIN Lock/Unlock Win Key
FN + F12 Volume +
FN + F4 Mail FN + F8 Play/Pause

MACOS SHORTCUTS

FN + F1 Sreen Brightness - FN + F5 Mic FN + F9 Next Track

FN + F2 Screen Brightness + FN + F6 Screen Shot FN + F10 Mute

FN + F3 Task FN + F7 Previous Track FN + F11 Volume -

FN + F4 Search FN + F8 Play/Pause FN + F12 Volume +

KEY COMBINATIONS

FN + ESC Short Press to Switch to BT2; Short Press to Switch to 2.4G Mode;
Reset Keyboard FN + 2 FN + 4
(hold 3s) Long Press to Pair Devices Long Press to Pair Devices
Short Press to Switch to BT1; Short Press to Switch to BT3;
FN + 1 FN + 3 FN + 5 Wired Mode
Long Press to Pair Devices Long Press to Pair Devices
FN + SPACEBAR Battery Check
(hold)

LIGHTS EFFECTS

FN + ENTER Turn On/Off Backlights FN + Backlights Brightness + FN + -_ Backlights Speed - FN + ] } Backlights SAT +

FN + \| Toggle RGB Effects FN + Backlights HUE + FN + =+ Backlights Speed +

FN + Backlights Brightness - FN + Backlights HUE - FN + [ { Backlights SAT -

CHECK BATTERY LEVEL VIA CONNECTION

1. QwertyKey75 Keyboard support using VIA Programme

Holding Fn+B causes the keys from 1! to 0) to light up
to configure and mapping the keys. Please visit
to indicate the battery level. For instance, if the keys
https://github.com/WestBerryVIA/via-releases/releases
from 1! to 6^ light up when holding Fn+SpaceBar, it means that
to download the latest VIA application to your PC.
from 1! to 6 light up, the battery life is now 60%;
if the keys from 1!-0) light up, the battery level is 100%.
When the keyboard is low battery (bellow 3.5V) the “SpaceBar” 2. Download the .JSON file from QWERTYKEY.RO
Key backlit will keep flashing Red. and upload the file to the VIA Software.
If you use 2.4GHz wireless connection, please use QwertyKey75-2.4G.JSON

CHECK CONNECTION MODE

Holding Fn Key causes the 1! 2@ 3# 4� 5%,

5 indicators to light up, indidcating the keyboard’s connection mode.
1!/2@/3# for Bluetooth, 4� for 2.4GHz, 5% for wired mode connection.

Auto Sleep Mode

3. When the loading is completed, and the keyboard connected,
VIA software will auto detect your keyboard by “Configure” Tab will
1. If with no operation in 3 min under BT or 2.4GHz Mode, display the layout and programmable functions.
the keyboard backlit will be auto turn off, if no operation
in 10 min, the keyboard will enter stanby mode, and disconnect
the bluetooth device, press any key to awaken it,
the RGB Backlit will turn on.
QwertyKey75 memory is persistent, which means
that whenever you plug in the keyboard it remembers the settings.
REPLACING KEYCAPS AND SWITCHES

Tools included
Keycap/ Switch Puller
Dongle wireless
USB Type C to USB Type A cable
Extra keycaps for MACOS layout
Example of a switch as seen from top
after you remove the keycap to prepare
switch removal.

Install Switches
1. Check that all the switch metallic pins are perfectly straight.
2. Align the switch vertically.
3. Press the switch down until you hear a click. This means your switch The Switch Puller tool aligns Vertically to the Switch to
clips have attached themselves to the keyboard plate. unclip the plastic securing the switch to the plate.
4. In case the switch doesn’t work, check the switch pins again.

Remove Switches
Push straight 1. Grab your Switch Removal Tool and align the gripping teeth
vertically (on the Y-Axis) at the center of the switch, as shown in
down the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until
Be sure the pins the switch releases itself from the plate.
are aligned with 3. Using firm but gentle force pull the switch away from the
keyboard using a vertical motion.
the slots.

Before installing switches, be sure the pins are clean and straight.

For any technical issue, please send an email to [email protected] with your order number and a detailed description of your problem.