USN:

B.N.M. Institute of Technology

An Autonomous Institution under VTU
Model Question Paper
Third Semester BE, 2022-23 Scheme
Logic Design and Applications – 22CSE135
Duration: 3 Hour Max. Marks: 100
Note: 1. Answer one full question from each Module 1,2,3,4,5 (5Q x 20M=100 Marks)

Module 1
Q. CO PO Cognitive
Marks
No level
CO1 1,2,3,5,8, Understanding
1 With block diagram, explain the operation of 9
08
(a) Astable multivibrator using IC 555. PSO2
CO1 1,2,3,5,8, Understanding
1 With circuit diagram, explain the operation of a Relaxation 9
06
(b) oscillator. PSO2
CO1 1,2,3,5,8, Understanding
1 Discuss characteristics of an ideal op-amp and compare with 9
06
(c) practical op-amp. PSO2
OR
CO1 1,2,3,5,8, Understanding
2 With hysteresis characteristics explain the working of Schmitt 9
06
(a) trigger circuit. PSO2
CO1 1,2,3,5,8, Understanding
2 9
Sketch and explain the working of peak detector. 06
(b) PSO2
CO1 1,2,3,5,8, Understanding
2 9
Explain the performance parameters of operational amplifier. 08
(c) PSO2
Module 2
Simplify the following function using K-Map and obtain CO2 1,2,3, Apply
simplified Boolean expressions 5,8,9
3 PSO2
10
(a) i) F1( a,b,c,d) = ∑ m(1,3,4,5,7,10,12)
ii) F2(a,b,c,d) = ∑ m(5,8,9,10,11,12,13,14,15)

Find all the prime implicates of function using Quine- CO2 1,2,3, Apply
3 McClusky method. 5,8,9
10
(b) PSO2
F(a,b,c,d) = ∑ m(0,2,3,4,8,10,12,13,14)
 USN:
OR
Define Static 1 hazard. Explain how static 1 hazard can be CO2 1,2,3, Apply
4 5,8,9
08
(a) detected and removed with an example.
PSO2
For the given function determine minimal sum of product CO2 1,2,3, Apply
using MEV technique. Use d as MEV variable. 5,8,9
4 06 PSO2
(b)
F(a,b,c,d) = ∑ m(3,4,5,7,8,11,12,13,15)

4 Discuss briefly an HDL Implementation models. CO2 1,2,3, Apply

06 5,8,9
(c)
PSO2
Module 3
5 Implement Y(A,B,C,D)= ∑ m(0,2,3,4,5,8,9,10,11,12,13,15) CO3 1,2,3, Analyze
06 5,8,9
(a) using 8 to 1 multiplexer.
PSO2
What is magnitude comparator? Write the truth table and logic CO3 1,2,3, Analyze
5 5,8,9
06
(b) circuit of a 1-bit comparator.
PSO2
5 What are different types of PLDs? Implement the 7 segment CO3 1,2,3, Analyze
08 5,8,9
(c) decoder using PLA.
PSO2
OR
6 Explain multiplexer with an example. Realize the 8:1 CO3 1,2,3, Analyze
08 5,8,9
(a) multiplexer using 2:1 and 4:1 multiplexer.
PSO2
CO3 1,2,3, Analyze
6 Explain the purpose of using parity generator and checkers 06
5,8,9
(b) using suitable illustrations.
PSO2
CO3 1,2,3, Analyze
6 Show how two 1 to 16 DEMUX can be connected to get 1 to 06
5,8,9
(c) 32 DEMUX.
PSO2
Module 4
7 What is a flip flop, Explain the gated D-latch, with a neat CO4 1,2,3, Analyze
06 5,8,9
(a) diagram
PSO2
7 Explain the Master-slave J-K flip-flop with a neat diagram, CO4 1,2,3, Analyze
10 5,8,9
(b) using NAND gates
PSO2
7 CO4 1,2,3, Analyze
Explain T-flip flop with a diagram. 04 5,8,9
(c)
PSO2
OR
Draw the logic diagram for a 4 bit serial-in-serial out shift CO4 1,2,3, Analyze
8 register using edge triggered J-K flip flop and explain the 5,8,9
10
(a) circuit with waveform and the truth table. PSO2

Name and explain in short the four basic types of shift CO4 1,2,3, Analyze
8 5,8,9
10
(b) registers and draw a block diagram for each.
PSO2
Module 5
) Define Counter. Design a synchronous counter for the CO5 1,2,3, Analyze
9 5,8,9
sequence, 0 -> 3 -> 1 -> 2->6->7->0->3 using J-K flip flop. 12
(a)
PSO2
 USN:
9 Explain with neat diagram the working principle of Digital CO5 1,2,3, Analyze
08 5,8,9
(b) clock.
PSO2
OR
Explain a 3 bit binary Ripple down counter. Give block CO5 1,2,3, Analyze
10 5,8,9
10
(a) diagram, truth table and output waveforms.
PSO2
10 CO5 1,2,3, Analyze
Compare Synchronous and Asynchronous counter. 05 5,8,9
(b)
PSO2
10 CO5 1,2,3, Analyze
Write the HDL code to implement mod-8 up down counter. 05 5,8,9
(c)
PSO2