Laboratory Practice-II (Cloud TE Computer
P
ractical No : 05
Practical Title: Setup your own cloud for Software as a Service (SaaS) over the existing
LAN in your laboratory. In this assignment you have to write your own code for cloud
controller using open-source technologies to implement with HDFS. Implement the basic
operations may be like to divide the file in segments/blocks and upload/ download file
on/from cloud in encrypted form.
Objectives:
● To set your own cloud for SaaS over existing LAN
● To implement the basic operations may be like to divide the file in segments/blocks
Hardware Requirements :
•Pentium IV with latest configuration
Software Requirements :
•Ubuntu 20.04, VMwareESXi cloud
Theory:
Here we are installing VMwareESXi cloud
Host/NodeESXi installation:-
ESXiHardwareRequirements:-
• ESXi6.7requiresahostmachinewithatleasttwoCPUcores.
• ESXi6.7supports64-bitx86processors
• ESXi6.7requirestheNX/XDbit to be enabled for the CPU in the BIOS.
• ESXi6.7requiresaminimumof4GBofphysicalRAM.Itisrecommende
d to provide atleast 8 GB of RAM to run virtual machines in
typical productionenvironments.
• Tosupport64-bitvirtualmachines,support for hardware
virtualization (IntelVT-xor AMDRVI)
mustbeenabledonx64CPUs.
• One or more Gigabit or faster Ethernet controllers. For a list
of supportednetwork adapter models.
Laboratory Practice-II (Cloud TE Computer
• SCSI disk oralocal,non-network,RAIDLUN with unpartitioned space
for the virtualmachines.
Laboratory Practice-II (Cloud TE Computer
ForSerialATA(SATA), a disk connected through supported SAS controller or supported on
board SATA controllers. SATA disks are considered remote not local. These disks are not used as
a scratch partition by default be cause they are seen as remote.
ESXiInstaller:
Accept Agreement:
Laboratory Practice-II (Cloud TE Computer
Select storage :
Select Keyboard Layout :
Set NodeESXi Root Password :
Laboratory Practice-II (Cloud TE Computer
Installation complete (Reboot)CLII interface to configuration
CLI Interface to Configuration:
Configure Management Network
Laboratory Practice-II (Cloud TE Computer
Set IPV4
Set DNSeriver :
Restart Management Network
Laboratory Practice-II (Cloud TE Computer
GUIAccess :
ClusterSetup
• CreatingDatacenter
• CreatingCluster
• Adding Hosts incluster
• Resourcesafteraddingcluster.
• DRS
• Failover
VCenter Access:
Laboratory Practice-II (Cloud TE Computer
Create Datacenter:
Create cluster :
Assign cluster name :
MET’s BKC Institute of Engineering, Nashik. Prof. Anand N. Gharu
Laboratory Practice-II (Cloud TE Computer
Add host .:
Add host IP :
Enter host credential :
MET’s BKC Institute of Engineering, Nashik. Prof. Anand N. Gharu
Laboratory Practice-II (Cloud TE Computer
Hot summary :
Lock Down mode:
Add Host In Pool:
Finish:
Laboratory Practice-II (Cloud TE Computer
Host View and View Config:
Cluster View and Configuration:
Conclusion: Like this we have configure VSphere Private Cloud
