Pci 336
Pci 336
Action Code:
When convenient
General information
EM80 / EM300 Actuator
Measures
In order to avoid the unexpected stop of engine operation we suggest the possibility to maintain, respectively to
replace the roller bearings of the actuator to prevent possible damages on the engine. Please consider that we
can offer an reconditioned EM 300 actuator to deliver on an exchange basis.
The time required to replace the actuator only takes between one and two hours. The reconditioned actuator
will also be equipped with a new modified rear bearing shield to reinforce reliability and service live.
According to our experience we recommend a replacement after approximately 12.000 running hours or
somewhat earlier, depending on the operating conditions at site. The most convenient opportunity would be an
installation during a scheduled engine maintenance within the 10.000 - 12.000 running hours interval.
A maintenance interval for the EM 300 based on the major overhaul interval of the diesel engine is essential for
a steady and save engine operation. The adjusted EM driver unit can only regulate / control the requested
engine speed if the actuator is mechanical in proper condition. The replacement and adjustment of the EM 300
can also be supported online via our personnel.
Contact
Should you have any queries, our Technical Service will be pleased to be of assistance: