AIR & MULTIPURPOSE

AIR &
MULTIPURPOSE
General Purpose GENERAL
Heavy Duty
Push-on PURPOSE
CHEMICAL
TRANSFER

CLEANING
EQUIPMENT
Superior Oil Oil
FOOD Abrasion Non- Resistance Resistance Temp Thermo-
Transfer Page Cover MSHA conductive Tube* Cover* Range plastic Rubber

Washdown Arctic Ortac Plus 12 B B -65˚F to Yes

®

180˚F

MARINE Braidair ™
24 A B -20˚F to Yes
190˚F
MATERIAL Flexsteel ®
19 B B -20˚F to Yes
HANDLING Service Station Air 190˚F
Abrasives Gorilla ®
11 Yes Yes Yes A A -20˚F to Yes
Bulk Transfer 190˚F
Cement & Concrete Horizon 200 ®
12-13 C C -40˚F to Yes
190˚F
MINING Horizon 250 ®
12-13 C C -40˚F to Yes
190˚F
PETROLEUM
Horizon 300 ®
12-13 C C -40˚F to Yes
Aircraft Fueling 190˚F
Dispensing
F5 ™
21 Yes B B -40˚F to Yes
Dock 158˚F
Transfer
Ortac 250
®
14-15 Yes Yes A A -20˚F to Yes
190˚F
SPRAY
Ortac 300
®
14-15 Yes Yes A A -20˚F to Yes
190˚F
STEAM
Ortac 400
®
14-15 Yes Yellow Yes A A -20˚F to Yes
VACUUM only 190˚F

Pliovic FG (FDA-3A)
®
72 Yes B B -10˚F to Yes
VEYANCE 158˚F

Pliovic GS ®
22-23 Yes B B -10˚F to Yes
WATER 158˚F
Discharge Pliovic Plus 250
®
22-23 Yes B B -10˚F to Yes
Suction & 158˚F
Discharge
Service Station Air 20 C C -40˚F to Yes
Washdown 190˚F

Wingfoot 200 ®
16-17 Yes A B -20˚F to Yes
WELDING 190˚F

COUPLING Wingfoot 300 ®

16-17 Yes A B - 20˚F to Yes
190˚F
SYSTEMS
*Based on RMA oil classification, see page 300 for more information.

APPENDIX

10
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
GORILLA® General Purpose
Heavy Duty
Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: A premium-quality, multipurpose industrial hose with a wide range of applications in CLEANING
factories, construction, agriculture, quarries, mines, railroads, the oil and gas industry, EQUIPMENT
and shipbuilding. All sizes are rated at 500 psi (3.4 Mpa) maximum working pressure.
Nonconductive, minimum electrical resistance greater than one (1) megaohm per inch of
hose length at 1000 Volts DC. FOOD
CONSTRUCTION Transfer
TUBE: Nitrile synthetic rubber, RMA Class A (High Oil Resistance) Washdown
COVER: Yellow Carbryn™ synthetic rubber, RMA Class A (High Oil Resistance) MSHA approved
MARINE
REINFORCEMENT: Spiral Flexten® yarn, 2” is braided synthetic yarn
MATERIAL
TEMPERATURE: -20˚F to 190˚F (-29˚C to 88˚C)
HANDLING
PACKAGING: 3/16”– 3/4” 500’ reels, maximum 3 pieces, 50’ increments Abrasives
1” 450’ reels, maximum 3 pieces, 50’ increments Bulk Transfer
1¼” 250’–450’ reels, maximum 3 pieces, 50’ increments
1½” 150’–350’ reels, maximum 3 pieces, 50’ increments Cement & Concrete
2” 200’ carton, maximum 3 pieces, 50’ increments
Coupled assemblies available: 1/4”, 3/8”, 1/2”, and 3/4”. MINING
BRANDING: Example: Gorilla® 1” (25.4 mm) 500 psi. Made in USA Goodyear®.
Flame Resistant USMSHA No. 2G-14C/14. PETROLEUM
Aircraft Fueling
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure. Dispensing
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements. Dock
Transfer
ORDER CODES: 569-035 536-446 (2”)
SPRAY

GORILLA® STEAM
ID NOM. OD MAX. WP WEIGHT
VACUUM
in. mm. in. mm. psi Mpa lb./ft. kg./m.
3/16 4.8 0.47 11.9 500 3.45 0.08 0.12 VEYANCE
1/4 6.4 0.61 15.5 500 3.45 0.17 0.25
5/16 7.9 0.69 17.5 500 3.45 0.20 0.30 WATER
3/8 9.5 0.73 18.6 500 3.45 0.22 0.33 Discharge
1/2 12.7 0.89 22.6 500 3.45 0.28 0.42 Suction &
5/8 15.9 1.06 26.9 500 3.45 0.35 0.52 Discharge
3/4 19.1 1.19 30.2 500 3.45 0.41 0.61 Washdown
1 25.4 1.50 37.8 500 3.45 0.58 0.86
1¼ 31.8 1.77 45.6 500 3.45 0.79 1.18 WELDING
1½ 38.1 2.04 51.8 500 3.45 0.86 1.27
2 50.8 2.62 66.6 500 3.45 1.22 1.82 COUPLING
SYSTEMS

APPENDIX

11
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose HORIZON®
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: An economical air and water hose, Horizon® is for a wide range of industrial, construction
EQUIPMENT and agricultural applications. Available in 200, 250, and 300 PSI working pressures.
CONSTRUCTION
TUBE: Versigard® synthetic rubber, RMA Class C (Limited Oil Resistance)
FOOD
Transfer COVER: Black, Red, Yellow, Green or Blue Versigard® synthetic rubber
Washdown
REINFORCEMENT: Spiral synthetic yarn, 2” is braided
MARINE TEMPERATURE: -40˚F to 190˚F (-40˚C to 88˚C)

MATERIAL PACKAGING: 3/16”–3/4” 500’ reels, maximum 3 pieces, 50’ increments

1” 450’ reels, maximum 3 pieces, 50’ increments
HANDLING 1¼” 400’ reels, maximum 3 pieces, 50’ increments
Abrasives 1½” 300’ reels, maximum 3 pieces, 50’ increments
Bulk Transfer 2” 200’, cartons, maximum 3 pieces, 50’ increments
Coupled assemblies available in 1/4”, 3/8”, 1/2”, and 3/4” in red.
Cement & Concrete
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
MINING
BRANDING: Example: 1/2” Horizon® Goodyear® 300 psi WP.
PETROLEUM NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Aircraft Fueling
Dispensing ORDER CODES: See next page.
Dock
Transfer Verisgard® is a registered tradmark of The Goodyear Tire & Rubber Company.

SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

12
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
® ORDER CODES: 536-035 (2” black) 536-040 (2” red) 569-009 (black) General Purpose
HORIZON 200 569-011 (red) 569-038 (yellow) 569-547 (blue)
Heavy Duty
ID NOM. OD MAX. WP WEIGHT Push-on
in. mm. in. mm. psi Mpa lb./ft. kg./m..
CHEMICAL
3/16 4.8 0.44 11.2 200 1.38 0.08 0.12 TRANSFER
1/4 6.4 0.50 12.7 200 1.38 0.09 0.13
5/16 7.9 0.58 14.7 200 1.38 0.12 0.18 CLEANING
3/8 9.5 0.67 17.0 200 1.38 0.15 0.22 EQUIPMENT
1/2 12.7 0.81 20.6 200 1.38 0.20 0.30
5/8 15.9 0.97 24.6 200 1.38 0.27 0.40 FOOD
3/4 19.1 1.12 28.5 200 1.38 0.34 0.51 Transfer
1 25.4 1.44 36.8 200 1.38 0.54 0.80 Washdown
1¼ 31.8 1.73 44.0 200 1.38 0.75 1.12
1½ 38.1 1.98 50.3 200 1.38 0.86 1.28 MARINE
2 50.8 2.50 63.5 200 1.38 1.16 1.73
MATERIAL
HANDLING
Abrasives
® ORDER CODES: 569-010 (black) 569-012 (red) 569-039 (yellow) Bulk Transfer
HORIZON 250 569-506 (green) 569-548 (blue) Cement & Concrete
ID NOM. OD MAX. WP WEIGHT
MINING
in. mm. in. mm. psi Mpa lb./ft. kg./m..
1/4 6.4 0.53 13.5 250 1.72 0.11 0.16 PETROLEUM
5/16 7.9 0.59 15.0 250 1.72 0.13 0.19 Aircraft Fueling
3/8 9.5 0.70 17.8 250 1.72 0.17 0.25 Dispensing
1/2 12.7 0.84 21.3 250 1.72 0.22 0.33 Dock
5/8 15.9 0.98 24.9 250 1.72 0.27 0.40 Transfer
3/4 19.1 1.14 29.0 250 1.72 0.35 0.52
SPRAY

STEAM
® ORDER CODES: 569-516 (yellow) 569-557 (red) 569-560 (green)
HORIZON 300 VACUUM
ID NOM. OD MAX. WP WEIGHT VEYANCE
in. mm. in. mm. psi Mpa lb./ft. kg./m..
1/4 6.4 0.53 13.5 300 2.07 0.10 0.15 WATER
3/8 9.5 0.70 17.8 300 2.07 0.17 0.25 Discharge
1/2 12.7 0.84 21.3 300 2.07 0.22 0.33 Suction &
3/4 19.1 1.15 29.2 300 2.07 0.37 0.55 Discharge
1 25.4 1.48 37.3 300 2.07 0.58 0.86 Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

13
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose ORTAC®
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: Ortac® (Oil Resistant Tube and Cover) is our most popular premium-quality multipurpose
EQUIPMENT hose. Used in the most abusive industrial applications, Ortac will handle air, oil, water, kero-
sene and some chemicals. Nonconductive, minimum electrical resistance greater than one
(1) megohm per inch of hose length; at 1000 Volts DC. Available in 250, 300 and 400 PSI
FOOD working pressures. NOTE: Ortac 400 Yellow is USMSHA approved.
Transfer CONSTRUCTION
Washdown TUBE: Nitrile synthetic rubber, RMA Class A (high oil resistance)

COVER: Red or Yellow Carbryn™ synthetic rubber, RMA Class A (high oil resistance)
MARINE
REINFORCEMENT: Spiral synthetic yarn, 2” is braided
MATERIAL
TEMPERATURE: -20˚F to 190˚F (-29˚C to 88˚C)
HANDLING
Abrasives PACKAGING: 3/16”–3/4” 500’ reels, maximum 3 pieces, 50’ increments
Bulk Transfer 1” 450’ reels, maximum 3 pieces, 50’ increments
1¼” 400’ reels, maximum 3 pieces, 50’ increments
Cement & Concrete 1½” 300’ reels, maximum 3 pieces, 50’ increments
2” 200’ cartons, maximum 3 pieces, 50’ increments
MINING
BRANDING: Example: 11/2” (38.1 mm) Ortac® 300 psi WP. Made in USA Goodyear®.
PETROLEUM COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Aircraft Fueling
Dispensing NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Dock ORDER CODES: See next page.
Transfer

SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

14
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
® ORDER CODES: 569-058 (1/4” - 11/2”) red 536-465 (2”) red 536-010 (2”) black General Purpose
ORTAC 250
Heavy Duty
ID NOM. OD MAX. WP WEIGHT Push-on
in. mm. in. mm. psi Mpa lb./ft. kg./m..
CHEMICAL
1/4 6.4 0.53 13.5 250 1.72 0.09 0.13 TRANSFER
5/16 7.9 0.62 17.5 250 1.72 0.14 0.21
3/8 9.5 0.69 17.5 250 1.72 0.15 0.22 CLEANING
1/2 12.7 0.84 21.3 250 1.72 0.20 0.30 EQUIPMENT
5/8 15.9 1.00 25.4 250 1.72 0.26 0.39
3/4 19.1 1.14 29.0 250 1.72 0.34 0.51 FOOD
1 25.4 1.47 37.3 250 1.72 0.51 0.76 Transfer
1¼ 31.8 1.77 45.2 250 1.72 0.70 1.04 Washdown
1½ 38.1 2.08 52.8 250 1.72 0.96 1.43
2 50.8 2.50 63.5 200 1.37 1.08 1.61 MARINE

MATERIAL
HANDLING
® ORDER CODES: 569-059 (red) Abrasives
ORTAC 300
Bulk Transfer
ID NOM. OD MAX. WP WEIGHT Cement & Concrete
in. mm. in. mm. psi Mpa lb./ft. kg./m..
MINING
3/16 4.8 0.44 11.8 300 2.07 0.07 0.10
1/4 6.4 0.61 15.7 300 2.07 0.14 0.21 PETROLEUM
5/16 7.9 0.68 17.3 300 2.07 0.16 0.24 Aircraft Fueling
3/8 9.5 0.73 18.6 300 2.07 0.18 0.27 Dispensing
1/2 12.7 0.89 22.6 300 2.07 0.25 0.37 Dock
5/8 15.9 1.06 26.9 300 2.07 0.35 0.52 Transfer
3/4 19.1 1.19 30.2 300 2.07 0.40 0.60
1 25.4 1.50 38.1 300 2.07 0.59 0.88 SPRAY
1¼ 31.8 1.81 46.0 300 2.07 0.76 1.13
1½ 38.1 2.08 52.8 300 2.07 0.88 1.31 STEAM

VACUUM

VEYANCE
® ORDER CODES: 569-065 (yellow) (USMSHA rated) 569-066 (red)
ORTAC 400
WATER
ID NOM. OD MAX. WP WEIGHT Discharge
in. mm. in. mm. psi Mpa lb./ft. kg./m.. Suction &
1/4 6.4 0.61 15.7 400 2.76 0.16 0.24
Discharge
3/8 9.5 0.73 18.8 400 2.76 0.20 0.30
Washdown
1/2 12.7 0.89 22.8 400 2.76 0.26 0.39
3/4 19.1 1.18 30.0 400 2.76 0.41 0.61
WELDING
1 25.4 1.50 38.1 400 2.76 0.61 0.91
COUPLING
SYSTEMS

APPENDIX

15
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose WINGFOOT®
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A good-quality, economical general purpose hose for industrial air service, compressor lines,
EQUIPMENT pneumatic tools, low-pressure spray and many other applications where the need for oil
resistance is moderate. Nonconductive, minimum electrical resistance greater than one
(1) megohm per inch of length of hose at 1000 V DC. Available in 200 and 300 PSI working
FOOD pressures.
Transfer CONSTRUCTION
Washdown TUBE: Nitrile synthetic rubber, RMA Class A (high oil resistance)

COVER: Red, Blue, or Black Chemivic™ synthetic rubber, RMA Class B (medium oil resistance)
MARINE
REINFORCEMENT: Spiral synthetic yarn
MATERIAL
TEMPERATURE: -20˚F to 190˚F (-29˚C to 88˚C)
HANDLING
Abrasives PACKAGING: 3/16”– 3/4” 500’ reels, maximum 3 pieces, 50’ increments
Bulk Transfer 1” 450’ reels, maximum 3 pieces, 50’ increments
1¼” 400’ reels, maximum 3 pieces, 50’ increments
Cement & Concrete 1½” 300’ reels, maximum 3 pieces, 50’ increments
Coupled assemblies available in 1/4”, 3/8”, and 1/2” in red.
MINING
BRANDING: Example: Wingfoot® Nonconductive 1/2” (12.7 mm) 200 psi WP. Made in USA Goodyear®.
PETROLEUM COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Aircraft Fueling
Dispensing NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Dock ORDER CODES: See next page.
Transfer

SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

16
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
® ORDER CODES: 569-005 (black) 569-007 (red) 569-036 (blue) General Purpose
WINGFOOT 200
Heavy Duty
ID NOM. OD MAX. WP WEIGHT Push-on
in. mm. in. mm. psi Mpa lb./ft. kg./m..
CHEMICAL
3/16 4.8 0.44 11.2 200 1.38 0.07 0.10 TRANSFER
1/4 6.4 0.53 13.5 200 1.38 0.10 0.15
5/16 7.9 0.63 16.0 200 1.38 0.14 0.21 CLEANING
3/8 9.5 0.69 17.5 200 1.38 0.15 0.22 EQUIPMENT
1/2 12.7 0.84 21.3 200 1.38 0.21 0.31
5/8 15.9 1.00 25.4 200 1.38 0.27 0.40 FOOD
3/4 19.1 1.13 28.7 200 1.38 0.38 0.57 Transfer
1 25.4 1.47 37.3 200 1.38 0.58 0.86 Washdown

MARINE
® ORDER CODES: 569-006 (black) 569-008 (red) 569-037 (blue)
WINGFOOT 300 MATERIAL
HANDLING
ID NOM. OD MAX. WP WEIGHT Abrasives
in. mm. in. mm. psi Mpa lb./ft. kg./m.. Bulk Transfer
3/16 4.8 0.44 11.2 200 1.38 0.07 0.10 Cement & Concrete
1/4 6.4 0.54 13.7 300 2.07 0.14 0.21
5/16 7.9 0.64 16.3 300 2.07 0.18 0.27 MINING
3/8 9.5 0.69 17.5 300 2.07 0.19 0.28
1/2 12.7 0.86 21.8 300 2.07 0.26 0.39 PETROLEUM
5/8 15.9 1.02 25.9 300 2.07 0.33 0.49 Aircraft Fueling
3/4 19.1 1.19 30.2 300 2.07 0.42 0.63 Dispensing
1 25.4 1.50 38.1 300 2.07 0.62 0.92 Dock
1¼ 31.8 1.77 45.6 250 1.72 0.84 1.25 Transfer
1½ 38.1 2.08 53.2 250 1.72 1.04 1.55
SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

17
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose ARCTIC
Heavy Duty
Push-on ORTAC® PLUS
CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A low-temperature hose construction for air, water, oil, kerosene, fuel oil and some chemical
EQUIPMENT operations where temperatures fall as low as -65˚F (-54˚C).
CONSTRUCTION
TUBE: Black low-temp, ECO oil-resistant synthetic rubber, RMA Class A (High Oil Resistance)
FOOD
Transfer COVER: Black ultra-low temperature, ECO oil resistant synthetic rubber (with a blue stripe), RMA Class A
Washdown (High Oil Resistance)

REINFORCEMENT: One textile braid

MARINE
TEMPERATURE: -65˚F to 180˚F (-54˚C to 82˚C)
MATERIAL PACKAGING: 500’ reels, maximum 3 pieces, 50’ minimum length
HANDLING
Abrasives BRANDING: Example: 9.5mm 3/8” Arctic Ortac® Plus 2.1 MPA/300 PSI Goodyear® Made in the U.S.A.
Bulk Transfer COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and
Cement & Concrete coupling procedure.

MINING NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.

ORDER CODES: 536-275

PETROLEUM
Aircraft Fueling
Dispensing ARCTIC ORTAC® PLUS
Dock
ID NOM. OD MAX. WP WEIGHT
Transfer
in. mm. in. mm. psi Mpa lb./ft. kg./m..
SPRAY 1/4 6.4 0.63 16.0 300 2.07 0.16 0.22
3/8 9.5 0.75 19.1 300 2.07 0.20 0.28
STEAM 1/2 12.7 0.91 23.1 300 2.07 0.27 0.37
3/4 19.1 1.18 30.0 300 2.07 0.40 0.54
VACUUM 1 25.4 1.50 38.1 300 2.07 0.57 0.86

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

18
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
FLEXSTEEL® General Purpose
Heavy Duty
SERVICE STATION AIR Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: For tire inflation service from towers, reels, or curb connections. CLEANING
EQUIPMENT
CONSTRUCTION
TUBE: Nitrile synthetic rubber, RMA Class B (medium/high oil resistance)
FOOD
COVER: Red or Black nitrile synthetic rubber, abrasion- and oil-resistant, RMA Class B Transfer
(medium/high oil resistance) Washdown
REINFORCEMENT: Braided (1) steel wire braid
MARINE
TEMPERATURE: -20˚F to 190˚F (-29˚C to 88˚C)
MATERIAL
PACKAGING: 500’ reels, maximum 3 pieces, 25’ minimum
HANDLING
BRANDING: Example: Goodyear® 1/4” Flexsteel® Service Station Air. Made in USA. Abrasives
Bulk Transfer
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING
ORDER CODES: 539-078 (red) 539-097 (black)
PETROLEUM
Aircraft Fueling
FLEXSTEEL® SERVICE STATION AIR Dispensing
Dock
ID NOM. OD MAX. WP WEIGHT Transfer
in. mm. in. mm. psi Mpa lb./ft. kg./m..
SPRAY
1/4 6.4 0.61 15.5 250 1.72 0.18 0.28
3/8 9.5 0.72 18.3 250 1.72 0.23 0.34
STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

19
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose SERVICE
Heavy Duty
Push-on STATION AIR
CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: For general air line service stations, automobile repair shops, garages, etc.
EQUIPMENT
CONSTRUCTION
TUBE: Versigard® synthetic rubber, RMA Class C (Limited Oil Resistance)
FOOD
Transfer COVER: Versigard synthetic rubber (red)
Washdown
REINFORCEMENT: Spiral synthetic yarn

MARINE TEMPERATURE: -40˚F to 190˚F (-40˚C to 88˚C)

PACKAGING: 500’ reels, maximum 3 pieces, 50’ increments

MATERIAL
HANDLING BRANDING: Example: Service Station Air Made in the USA Goodyear®.
Abrasives
Bulk Transfer COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.

MINING ORDER CODES: 569-018

PETROLEUM
Aircraft Fueling SERVICE STATION AIR
Dispensing
Dock ID NOM. OD MAX. WP WEIGHT
Transfer in. mm. in. mm. psi Mpa lb./ft. kg./m.
1/4 6.35 0.59 14.99 250 1.72 0.16 0.24
SPRAY
3/8 9.53 0.71 18.03 250 1.72 0.21 0.31

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

20
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
F5™ General Purpose
Heavy Duty
AIR HOSE Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: For construction, manufacturing and other industries where flexibility, strength and durability CLEANING
are required. EQUIPMENT
CONSTRUCTION
TUBE: Blue Flexible TPE
FOOD
COVER: Matte Blue Flexible TPE Transfer
Washdown
REINFORCEMENT: Polyester fiber

TEMPERATURE: 40°F to 158°F (-40°C to 70°C) MARINE

PACKAGING: 750' reels or 50' coils MATERIAL
BRANDING: Example: F5™ 300psi Made in USA Goodyear®. HANDLING
Abrasives
COUPLINGS: MxM NPT for coupled assemblies Bulk Transfer
ORDER CODES: 540-438 (blue) Cement & Concrete

MINING
F5™ AIR HOSE
PETROLEUM
ID NOM. OD MAX. WP WEIGHT Aircraft Fueling
in. mm. in. mm. psi Mpa lb./ft. kg./m. Dispensing
Dock
1/4 6.6 .50 11.5 300 2.07 0.06 0.09
Transfer
3/8 9.8 .64 16.2 300 2.07 0.10 0.16
1/2 12.7 .81 20.0 300 2.07 0.16 0.24 SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

21
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose PLIOVIC®
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A lightweight, economical general purpose hose for carrying air, water and many spray solu-
EQUIPMENT tions. Pliovic® is suitable for a wide range of industrial, construction, agricultural hand
sprayers and many multipurpose applications. Nonconductive, minimum electrical resistance
greater than one (1) megohm per inch of hose length at 1000 Volts DC. Available in Pliovic®
FOOD GS construction or a thick cover, Pliovic® Plus construction. Non-marking cover.
Transfer CONSTRUCTION
Washdown TUBE: Black Pliovic®, RMA Class B (Medium Oil Resistance)

COVER: Pliovic®, smooth finish, RMA Class B (Medium Oil Resistance)

MARINE
REINFORCEMENT: Spiral synthetic yarn
MATERIAL
TEMPERATURE: -10˚F to 158˚F (-23˚C to 70˚C) for GS and Pliovic® Plus 250
HANDLING
Abrasives PACKAGING: 1/4”– 1/2” 750’ reels, maximum 3 pieces, 50’ increments
Bulk Transfer 5/8” 500’ reels, maximum 3 pieces, 50’ increments (Pliovic® Plus 250 Only)
3/4” 450’ reels, maximum 3 pieces, 50’ increments (Pliovic® Plus 250 Only)
Cement & Concrete 1” 400’ reels, maximum 3 pieces, 50’ increments (Pliovic® Plus 250 Only)
1¼”– 2” 300’ reels, maximum 3 pieces, 50’ increments (Pliovic® Plus 250 Only)
MINING Coupled assemblies availabe upon request. Contact hose marketing for availability on cut,
coiled, and tied hose lengths.
PETROLEUM BRANDING: Example: Pliovic® GS 3/8” ID (9.5 mm) 250 psi WP. Made in USA. Goodyear®.
Aircraft Fueling
Dispensing COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Dock NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Transfer
ORDER CODES: See next page.
SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

22
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
® ORDER CODES: 540-350 (blue) 540-357 (yellow) 540-472 (black) General Purpose
PLIOVIC GS 540-358 (green) 540-406 (red)
Heavy Duty
ID NOM. OD MAX. WP WEIGHT Push-on
in. mm. in. mm. psi Mpa lb./ft. kg./m.
CHEMICAL
1/4 6.4 0.45 11.4 300 2.07 0.06 0.09 TRANSFER
5/16 7.9 0.59 15.0 300 2.07 0.11 0.16
3/8 9.5 0.60 15.2 300 2.07 0.09 0.13 CLEANING
1/2 12.7 0.78 19.8 300 2.07 0.15 0.22 EQUIPMENT

FOOD
Transfer
Washdown

® ORDER CODES: 540-201 (red) 540-227 (blue) 540-232 (green)

MARINE
PLIOVIC PLUS 250 540-233 (black) 540-257 (yellow)

ID NOM. OD MAX. WP WEIGHT MATERIAL

in. mm. in. mm. psi Mpa lb./ft. kg./m. HANDLING
Abrasives
1/4 6.4 0.50 12.7 250 1.72 0.08 0.12
Bulk Transfer
3/8 9.5 0.66 16.8 250 1.72 0.13 0.19
Cement & Concrete
1/2 12.7 0.81 20.6 250 1.72 0.17 0.25
5/8 15.9 0.94 23.9 250 1.72 0.20 0.30
MINING
3/4 19.1 1.11 28.2 250 1.72 0.28 0.42
1 25.4 1.38 35.1 200 1.38 0.37 0.55 PETROLEUM
1¼ 31.75 1.72 43.6 125 0.86 0.60 0.89 Aircraft Fueling
1½ 38.1 1.98 50.2 125 0.86 0.72 1.07
Dispensing
2 50.8 2.51 63.8 100 0.69 1.00 1.48
Dock
Transfer

SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

23
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose BRAIDAIR™
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A quality braided general purpose hose for industrial service, compressor lines, pneumatic
EQUIPMENT tools, water service and low-pressure spray where the need for oil resistance is moderate.
CONSTRUCTION
TUBE: Black synthetic, RMA Class A (High Oil Resistance)
FOOD
Transfer COVER: Red synthetic, RMA Class B (Medium Oil Resistance)
Washdown
REINFORCEMENT: Braided (1) synthetic yarn
MARINE TEMPERATURE: -20˚F to 190˚F (-29˚C to 88˚C)

MATERIAL PACKAGING: 1/4”– 1” 400’–750’ reels, maximum 3 pieces, 50’ minimum

1¼”– 1½” 300’ reels, maximum 3 pieces, 50’ minimum
HANDLING 2” 150’–250’ carton, maximum 2 pieces, 50’ minimum
Abrasives
Bulk Transfer BRANDING: Example: Goodyear® Braidair™ 300 psi WP (20 Bar) 3/8” (9.5mm).
Cement & Concrete COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.

MINING NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.

ORDER CODES: 536-422 (1/4” - 1½”) 536-421 (2”)

PETROLEUM
Aircraft Fueling
Dispensing
Dock BRAIDAIR™
Transfer
ID NOM. OD MAX. WP WEIGHT
SPRAY in. mm. in. mm. psi Mpa lb./ft. kg./m.
1/4 6.4 0.55 14.0 300 2.07 0.11 0.16
STEAM 3/8 9.5 0.72 18.3 300 2.07 0.18 0.26
1/2 12.7 0.85 21.6 300 2.07 0.21 0.31
VACUUM 3/4 19.1 1.13 28.7 300 2.07 0.32 0.48
1 25.4 1.47 37.3 300 2.07 0.50 0.74
VEYANCE 1¼ 31.8 1.80 45.7 300 2.07 0.75 1.12
1½ 38.1 2.09 53.1 300 2.07 1.00 1.49
WATER 2 50.8 2.50 63.5 200 1.38 1.09 1.62
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

24
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
HEAVY DUTY General Purpose
Heavy Duty
Push-on

CHEMICAL
TRANSFER

CLEANING
EQUIPMENT

Oil Oil FOOD

Resistance Resistance Temp Wrapped
Page MSHA Tube* Cover* Range Textile Wire Braided Finish
Transfer
Explorer Air
®
27 C C -40˚F to Yes Yes Yes
Washdown
220˚F
Explorer® Plus Air 28 C C -40˚F to Yes Yes Yes MARINE
220˚F
Plicord® Air Green 400 30 C C -25˚F to Yes Yes MATERIAL
180˚F HANDLING
Steel Air 26 Yes B B -40˚F to Yes Yes Yes Abrasives
200˚F
Bulk Transfer
Plicord® Super Rock Drill 29 Yes A B -40˚F to Yes Yes
220˚F Cement & Concrete
Super Ortac® 31 Yes B B -20˚F to Yes Yes
200˚F MINING
* Based on RMA Oil Classification, see page 300 for more information.
PETROLEUM
Aircraft Fueling
Dispensing
Dock
Transfer

SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

25
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose STEEL AIR
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A heavy-duty, wrapped finish, single wire-braid or spiral ply wire air hose for higher
EQUIPMENT pressure service in severe industrial applications including service in mines, quarries and
construction jobs.
CONSTRUCTION
FOOD TUBE: Black Nitrile synthetic rubber, RMA Class B
Transfer
Washdown COVER: Yellow Chemivic™ synthetic rubber (wrapped impression), RMA Class B, MSHA approved

REINFORCEMENT: Braided (1) steel wire (1/2” - 11/2”) Spiral-plied steel wire (2” - 4”)
MARINE
TEMPERATURE: -40˚F to 200˚F (-40˚C to 93˚C)
MATERIAL
PACKAGING: 50’ and 100’ length, coiled
HANDLING
Abrasives BRANDING: Example: Goodyear® Steel Air 500 psi 3.4 MPA 2” 50.8 mm.
Bulk Transfer
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING

PETROLEUM ORDER CODES: 539-159 (1/2" - 1 1/2")

STEEL AIR
Aircraft Fueling
Dispensing ID NOM. OD MAX. WP WEIGHT
Dock in. mm. in. mm. psi Mpa lb./ft. kg./m.
Transfer
1/2 12.7 0.91 23.1 750 5.17 0.34 0.51
SPRAY 3/4 19.1 1.14 29.0 750 5.17 0.45 0.67
1 25.4 1.45 36.6 750 5.17 0.66 1.00
STEAM 1¼ 31.8 1.81 46.0 500 3.45 0.98 1.46
1½ 38.1 1.98 50.2 500 3.45 0.97 1.44
VACUUM

VEYANCE ORDER CODES: 549-209 (2" - 4")

STEEL AIR
WATER ID NOM. OD MAX. WP WEIGHT
Discharge in. mm. in. mm. psi Mpa lb./ft. kg./m.
Suction &
2 50.8 2.66 67.6 500 3.45 1.59 2.36
Discharge
2½ 63.5 3.33 84.6 500 3.45 2.63 3.91
Washdown 3 76.2 3.81 96.8 500 3.45 3.07 4.57
4 101.6 4.90 124.5 500 3.45 4.36 6.49
WELDING
Also available with Versigard® synthetic rubber tube and cover where superior heat resistance is more important than oil resistance.
COUPLING
SYSTEMS

APPENDIX

26
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
EXPLORER® AIR General Purpose
Heavy Duty
Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: A versatile, heavy-duty air hose for mining, construction and industrial applications. CLEANING
EQUIPMENT
CONSTRUCTION
TUBE: Black Versigard® synthetic rubber, RMA Class C (limited oil resistance) (536-509)
Black SBR synthetic rubber, RMA Class C (limited oil resistance) (549-943) FOOD
Transfer
COVER: Yellow Versigard® synthetic rubber (wrapped impression), RMA Class C (limited oil resistance) Washdown
REINFORCEMENT: Braided (1) synthetic yarn (1/2” – 2”); Spiral-plied synthetic fabric (2½” – 3”)
MARINE
TEMPERATURE: -40°F to 220°F (-40°C to 104°C)
MATERIAL
PACKAGING: 50’ length, coiled
HANDLING
BRANDING: Example: 1” 24.4mm Explorer® Air 300 psi 2.1 MPa W.P. Abrasives
Bulk Transfer
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING
ORDER CODES: 536 -509 (1/2” – 2”) 549-943 (2½” – 3”)
PETROLEUM
Aircraft Fueling
EXPLORER® AIR Dispensing
Dock
ID NOM. OD MAX. WP WEIGHT
Transfer
in. mm. in. mm. psi Mpa lb./ft. kg./m.
1/2 12.7 0.89 22.6 300 2.07 0.24 0.36 SPRAY
3/4 19.1 1.19 30.2 300 2.07 0.37 0.55
1 25.4 1.49 37.9 300 2.07 0.53 0.79 STEAM
1¼ 31.8 1.66 42.2 300 2.07 0.58 0.86
1½ 38.1 2.01 51.1 300 2.07 0.83 1.24 VACUUM
2 50.8 2.57 65.3 300 2.07 1.20 1.79
2½ 63.7 3.13 79.4 300 2.07 1.56 2.32 VEYANCE
3 76.1 3.56 90.6 300 2.07 1.67 2.48
WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

27
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose EXPLORER®
Heavy Duty
Push-on PLUS AIR
CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A versatile, heavy-duty air hose for mining, construction, and industrial applications where
EQUIPMENT medium pressures are encountered.
CONSTRUCTION
TUBE: Black Versigard® synthetic rubber (536-508), RMA Class C
FOOD Black Versigard synthetic rubber (549-413)
Transfer
Washdown COVER: Yellow Versigard® (wrapped impression)

REINFORCEMENT: Braided (1) synthetic yarn (1/2” – 1¼”); Spiral-plied synthetic fabric (1½” – 4”)
MARINE
TEMPERATURE: -40˚F to 220˚F (-40˚C to 104˚C)
MATERIAL
PACKAGING: 50’ length, coiled
HANDLING
Abrasives BRANDING: Example: 1” 25.4mm Explorer® Plus Air 400psi 2.8 MPa W.P. Goodyear®
Bulk Transfer
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING
ORDER CODES: 536-508 (1/2” – 1”) 549-317 (1¼” – 4”)
PETROLEUM
Aircraft Fueling
Dispensing EXPLORER® PLUS AIR
Dock
ID NOM. OD MAX. WP WEIGHT
Transfer
in. mm. in. mm. psi Mpa lb./ft. kg./m.
SPRAY 1/2 12.7 0.94 23.9 400 2.76 0.24 0.36
3/4 19.1 1.19 30.2 400 2.76 0.38 0.57
STEAM 1 25.4 1.49 37.9 400 2.76 0.54 0.80
1¼ 31.8 1.66 42.2 400 2.76 0.56 0.83
VACUUM 1½ 38.1 2.01 51.1 400 2.76 0.83 1.24
2 50.8 2.54 64.4 400 2.76 1.08 1.61
VEYANCE 2½ 63.5 3.17 80.6 400 2.76 1.70 2.53
3 76.2 3.66 93.0 400 2.76 2.00 2.98
WATER 4 101.6 4.78 121.5 400 2.76 2.92 4.35
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

28
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
PLICORD® General Purpose
Heavy Duty
SUPER ROCK DRILL Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: An extra heavy-duty, high-pressure hose for pneumatic service in mining, construction and CLEANING
industrial service where working conditions are especially severe. EQUIPMENT
CONSTRUCTION
TUBE: Black, heat-resistant Nitrile (ORS) synthetic rubber, RMA Class A (High Oil Resistance)
FOOD
COVER: Blue Chemivic™ synthetic with spiral yellow transfer stripe (wrapped impression) MSHA approved, Transfer
RMA Class B (medium oil resistance) Washdown
REINFORCEMENT: Spiral-plied steel wire
MARINE
TEMPERATURE: -40˚F to 220˚F (-40˚C to 104˚C)

PACKAGING: 100’ length, coiled, polywrapped

MATERIAL
HANDLING
BRANDING (SPIRAL): Example: Goodyear® Plicord® Super Rock Drill ORS 500 psi WP. Abrasives
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Bulk Transfer
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING
ORDER CODES: 549-285

PETROLEUM
Aircraft Fueling
PLICORD® SUPER ROCK DRILL Dispensing
ID NOM. OD MAX. WP WEIGHT Dock
Transfer
in. mm. in. mm. psi Mpa lb./ft. kg./m.
2½ 63.5 3.45 87.7 500 3.45 2.96 4.40 SPRAY
3 76.2 3.94 100.1 500 3.45 3.44 5.12
4 101.6 4.96 126.0 400 2.76 4.55 6.77 STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

29
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose PLICORD®
Heavy Duty
Push-on
AIR GREEN 400
CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: A versatile, heavy-duty air hose for use in rough industrial applications or for severe service
EQUIPMENT in mines, quarries and construction jobs.
CONSTRUCTION
TUBE: Black Plioflex® synthetic rubber, RMA Class C (Limited Oil Resistance)(nonconductive)
FOOD
Transfer COVER: Green Plioflex® synthetic rubber (wrapped impression), RMA Class C (Limited Oil Resistance)
Washdown
REINFORCEMENT: Spiral-plied synthetic fabric
MARINE TEMPERATURE: -25˚F to 180˚F (-32˚C to 82˚C)

MATERIAL PACKAGING: 100’ length, coiled, polywrapped

HANDLING BRANDING (SPIRAL): Example: Goodyear® Plicord® Air Green 400 psi WP.
Abrasives
Bulk Transfer COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.

MINING ORDER CODES: 549-006

PETROLEUM
Aircraft Fueling PLICORD® AIR GREEN 400
Dispensing
Dock ID NOM. OD MAX. WP WEIGHT
Transfer in. mm. in. mm. psi Mpa lb./ft. kg./m.
1/2 12.7 0.880 22.4 400 2.76 0.23 0.34
SPRAY 5/8 15.9 1.050 26.7 400 2.76 0.32 0.48
3/4 19.1 1.230 31.2 400 2.76 0.45 0.67
STEAM
1 25.4 1.500 38.1 400 2.76 0.58 0.86
1¼ 31.8 1.790 45.5 400 2.76 0.74 1.10
VACUUM
15⁄16 33.3 1.890 48.0 400 2.76 0.83 1.24
1½ 38.1 2.040 51.8 400 2.76 0.86 1.28
VEYANCE
2 50.8 2.546 64.7 400 2.76 1.11 1.65
2½ 63.5 3.156 80.2 400 2.76 1.64 2.44
WATER
3 76.2 3.700 94.0 400 2.76 2.14 3.18
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

30
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
SUPER ORTAC® General Purpose
Heavy Duty
Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: For heavy-duty service in handling air, water, oil, petroleum-based solvents and agricultural spray CLEANING
solutions. EQUIPMENT
CONSTRUCTION
TUBE: Nitrile synthetic rubber, RMA Class B (Medium Oil Resistance)
FOOD
COVER: Yellow Chemivic™ synthetic rubber, RMA Class B (Medium Oil Resistance), smooth finish, Transfer
pinpricked, MSHA approved
Washdown
REINFORCEMENT: Braided (1) steel wire
MARINE
TEMPERATURE: -20˚F to 200˚F (-29˚C to 93˚C)

PACKAGING: 1/2”– 1” 500’ reels, maximum 3 pieces, 50’ increments MATERIAL

1¼”– 1½” 300’ reels, maximum 3 pieces, 50’ increments HANDLING
2” 100’–200’ per carton, maximum 3 pieces, 50’ increments Abrasives
Also stocked in cut and coiled 50’ lengths, 2 pieces per carton, all sizes.
Bulk Transfer
BRANDING: Example: Goodyear® 1” Super Ortac® 1000 psi. Fire Resistant USMSHA IC-1 1/9. Made in USA. Cement & Concrete
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure. MINING
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
PETROLEUM
ORDER CODES: 539-152 Aircraft Fueling
Dispensing
Dock
SUPER ORTAC® Transfer
ID NOM. OD MAX. WP WEIGHT SPRAY
in. mm. in. mm. psi Mpa lb./ft. kg./m.
1/2 12.7 0.91 23.1 1000 6.9 0.34 0.51 STEAM
3/4 19.1 1.14 29.0 1000 6.9 0.44 0.65
1 25.4 1.45 36.8 1000 6.9 0.63 0.94 VACUUM
1¼ 31.8 1.81 46.0 1000 6.9 1.05 1.56
1½ 38.1 1.98 50.8 1000 6.9 1.08 1.61
VEYANCE
2 50.8 2.55 64.3 1000 6.9 1.57 2.34
WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

31
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose PUSH-ON
Heavy Duty
Push-on

CHEMICAL
TRANSFER

CLEANING
EQUIPMENT

FOOD Superior Oil Oil

Abrasion Non- Resistance Resistance Robotic General
Transfer Page Cover MSHA conductive Tube* Cover* Braided Service Industrial
Washdown Autogrip® 33 Yes Yes Yes B A Yes Yes Yes

MARINE Insta-Grip™ 250 35 Yes B B Yes

Insta-Grip™ 300 34 Yes Yes A B Yes Yes

MATERIAL
Insta-Grip™ TC 36 A B Yes Yes
HANDLING
Abrasives Ultra-Grip™ 37 Yes Yes Yes A A Yes Yes Yes
Bulk Transfer
Cement & Concrete * Based on RMA Oil Classification, see page 300 for more information.

MINING

PETROLEUM
Aircraft Fueling
Dispensing
Dock
Transfer

SPRAY

STEAM

VACUUM

VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

32
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
AUTOGRIP® General Purpose
Heavy Duty
Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: A premium-quality push-on hose specifically designed for the rigors of robotic and automated CLEANING
applications where flexibility, high abuse resistance and strength are desired. It is ideally suited EQUIPMENT
for use in the demanding applications of the automotive assembly, pharmaceutical, material
handling and welding industries. Nonconductive, minimum electrical resistance greater than one
(1) megohm per inch of hose length at 1000 Volts DC. FOOD
CONSTRUCTION Transfer
TUBE: Silicone not used in the manufacturing of this hose. Neoprene, seamless, heat- and oil-resistant, Washdown
RMA Class B (Medium Oil Resistance)

COVER: Weather-, abrasion- and oil-resistant Carbryn™ synthetic rubber, RMA Class A MARINE
(High Oil Resistance), MSHA approved
MATERIAL
REINFORCEMENT: Braided (1) high-strength yarn laid at the most effective angle for maximum coupling
holding ability HANDLING
Abrasives
TEMPERATURE: -40˚F to 200˚F (-40˚C to 93˚C) Bulk Transfer
PACKAGING: 1/4” – 1” 500’ reels, 4 piece maximum, 10’ minimum Cement & Concrete

BRANDING: Example: Autogrip® 9.5 mm (3/8”) 21 Bar (300 psi) WP Flame Resistant USMHA 2G-14C/28. MINING
Made in USA Goodyear®.

COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure. PETROLEUM
USE ONLY WATER-BASED INSTALLATION LUBRICANTS. Aircraft Fueling
Dispensing
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Dock
ORDER CODES: 535-571 (black) 535-572 (blue) 535-573 (gray) Transfer
535-574 (green) 535-575 (red) 535-576 (white)
535-577 (brown) 535-578 (yellow) SPRAY

STEAM
AUTOGRIP®
ID NOM. OD MAX. WP WEIGHT VACUUM
in. mm. in. mm. psi Mpa lb./ft. kg./m. VEYANCE
1/4 6.4 0.50 12.7 300 2.07 0.09 0.13
3/8 9.5 0.66 16.8 300 2.07 0.12 0.18 WATER
1/2 12.7 0.76 19.3 300 2.07 0.14 0.21 Discharge
5/8 15.9 0.92 23.4 300 2.07 0.17 0.25 Suction &
3/4 19.1 1.06 26.9 300 2.07 0.22 0.33 Discharge
1 25.4 1.34 34.0 300 2.07 0.31 0.46 Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

33
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose INSTA-GRIP™ 300
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: For use with push-on fittings at working pressures of 300 psi. For low-pressure hydraulic
EQUIPMENT and pneumatic systems such as shop air systems, general industrial, maintenance and
automotive assembly applications. Nonconductive, minimum electrical resistance, greater
than one (1) megohm per inch of hose length at 1000 Volts DC. MSHA approved covers.
FOOD CONSTRUCTION
Transfer TUBE: Silicone not used in the manufacturing of this hose. Chemivic™ oil- and heat-resistant
Washdown synthetic rubber, RMA Class A (High Oil Resistance)

COVER: Black, Green, Blue, Red, Yellow and Gray (others: contact customer service); MSHA
MARINE approved, weather-, abrasion-, and oil-resistant synthetic rubber. RMA Class B.
(Medium Oil Resistance)
MATERIAL REINFORCEMENT: Braided (1) high-strength synthetic yarn laid at the most effective angle for maximum
HANDLING strength and coupling holding ability
Abrasives
TEMPERATURE: -40˚F to 190˚F (-40˚C to 88˚C)
Bulk Transfer
Cement & Concrete PACKAGING: 500’ reels, maximum 4 pieces, 10’ minimum

MINING BRANDING: Example: Insta-Grip™ 1/4” 300 psi WP Flame Resistant USMSHA 2G-IC-14C/33
Made in USA Goodyear®.

PETROLEUM COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Aircraft Fueling
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Dispensing
Dock ORDER CODES: 535-278 (black) 535-279 (green) 535-294 (gray)
Transfer 535-280 (red) 535-281 (blue) 535-277 (yellow)

SPRAY
INSTA-GRIP™ 300
STEAM ID NOM. OD MAX. WP BEND RADIUS WEIGHT
VACUUM in. mm. in. mm. psi Mpa in. mm. lb./ft. kg./m.
1/4 6.4 0.54 13.7 300 2.07 3 64 0.09 0.13
VEYANCE 3/16 4.8 0.38 9.7 300 2.07 3 64 0.05 0.07
5/16 7.9 0.62 15.7 300 2.07 3 76 0.12 0.18
WATER 3/8 9.5 0.69 17.5 300 2.07 3 76 0.14 0.21
Discharge 1/2 12.7 0.81 20.6 300 2.07 5 127 0.17 0.25
Suction & 5/8 15.9 0.93 23.6 300 2.07 6 152 0.20 0.30
Discharge 3/4 19.1 1.07 27.2 300 2.07 7 178 0.26 0.39
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

34
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
INSTA-GRIP™ 250 General Purpose
Heavy Duty
Push-on

CHEMICAL
Product Specifications TRANSFER

APPLICATION: For use with push-on fittings at working pressures of 250 psi for industrial service. CLEANING
Nonconductive, minimum electrical resistance greater than one (1) megohm per inch of hose EQUIPMENT
length at 1000 Volts DC.
CONSTRUCTION
TUBE: Chemivic™ oil- and heat-resistant synthetic rubber, RMA Class A (High Oil Resistance) FOOD
Transfer
COVER: Red, Black, or Green Chemivic™, RMA Class B (Medium Oil Resistance) Washdown
REINFORCEMENT: Spiral Flexten® yarn
MARINE
TEMPERATURE: -20˚F to 190˚F (-29˚C to 88˚C)
MATERIAL
PACKAGING: 500’ reels, maximum 3 pieces, 50’ increments
HANDLING
BRANDING: Example: Insta-Grip™ Nonconductive 3/8” (9.5mm) 250 psi WP. Made in USA Goodyear®. Abrasives
Bulk Transfer
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING
ORDER CODES: 569-013 (red) 569-014 (black) 569-015 (green)
569-016 (grey)
PETROLEUM
Aircraft Fueling
INSTA-GRIP™ 250 Dispensing
Dock
ID NOM. OD MAX. WP WEIGHT Transfer
in. mm. in. mm. psi Mpa lb./ft. kg./m.
SPRAY
1/4 6.4 0.51 12.7 250 1.72 0.08 0.12
3/8 9.5 0.65 16.5 250 1.72 0.12 0.18 STEAM
1/2 12.7 0.80 20.3 250 1.72 0.17 0.25
5/8 15.9 0.94 23.9 250 1.72 0.23 0.34 VACUUM
3/4 19.1 1.08 27.4 250 1.72 0.28 0.42
VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

35
 AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
General Purpose INSTA-GRIP™ TC
Heavy Duty
Push-on

CHEMICAL
TRANSFER Product Specifications
CLEANING APPLICATION: For low-pressure hydraulic and pneumatic systems such as shop air systems, general
EQUIPMENT industrial, maintenance and automotive assembly applications.
CONSTRUCTION
TUBE: Chemivic™ oil- and heat-resistant synthetic rubber, RMA Class A (High Oil Resistance)
FOOD
Transfer COVER: Black, dyed textile braid, mildew- and oil-resistant
Washdown REINFORCEMENT: Braided (1) high-strength synthetic yarn laid at an angle for strength and coupling
holding ability
MARINE
TEMPERATURE: -40˚F to 190˚F (-40˚C to 88˚C)
MATERIAL PACKAGING: 500’ reels, maximum 4 pieces, 10’ minimum length
HANDLING
Abrasives BRANDING: Example: Insta-Grip™ TC 3/8” 300 psi WP. Made in USA Goodyear®.
Bulk Transfer COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Cement & Concrete
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
MINING
ORDER CODES: 535-230

PETROLEUM
Aircraft Fueling
Dispensing INSTA-GRIP™ TC
Dock
ID NOM. OD MAX. WP BEND RADIUS WEIGHT
Transfer
in. mm. in. mm. psi Mpa in. mm. lb./ft. kg./m.
SPRAY 1/4 6.4 0.50 12.7 300 2.07 3 64 0.08 0.12
5/16 7.9 0.56 14.2 300 2.07 3 76 0.09 0.13
STEAM 3/8 9.5 0.64 16.3 300 2.07 3 76 0.11 0.16
1/2 12.7 0.75 19.1 300 2.07 5 127 0.13 0.19
VACUUM 5/8 15.9 0.91 23.1 300 2.07 6 152 0.19 0.28
3/4 19.1 1.03 26.2 300 2.07 7 178 0.21 0.31
VEYANCE

WATER
Discharge
Suction &
Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

36
AIR & MULTIPURPOSE
AIR &
MULTIPURPOSE
ULTRA-GRIP™ General Purpose
Heavy Duty
Push-on

CHEMICAL
TRANSFER
Product Specifications
APPLICATION:
CLEANING
For use with push-on fittings at maximum working pressures of 400 psi. For low-pressure
hydraulic pneumatic systems such as robotics, shop air systems, general industrial, maintenance EQUIPMENT
and automotive assembly applications. Nonconductive, minimum electrical resistance greater
than one (1) megohm per inch of hose length at 1000 Volts DC. MSHA approved covers. FOOD
CONSTRUCTION
TUBE: Chemivic™ oil and heat-resistant synthetic rubber, RMA Class A (High Oil Resistance) Transfer
Washdown
COVER: MSHA approved Black (USMSHA 2G-1C-14C/27). Blue, Gray, Green, Red, White, Brown, and
Yellow (USMSHA 2G-1C-14C/28) (others: contact customer service), weather-, abrasion-, and
oil-resistant Carbryn™ rubber, RMA Class A (High Oil Resistance)
MARINE

REINFORCEMENT: Braided (1) high-strength synthetic yarn laid at an angle for strength and coupling holding ability MATERIAL
HANDLING
TEMPERATURE: -40˚F to 200˚F (-40˚C to 93˚C)
Abrasives
PACKAGING: 500’ reels, maximum 4 pieces, 10’ minimum length Bulk Transfer
Cement & Concrete
BRANDING: Example: Ultra-Grip™ Non-Conductive 3/8” 400 psi WP; Flame Resistant; USMSHA 2G-IC-14C/27
Made in USA. Goodyear®.
MINING
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
PETROLEUM
NON-STOCK/SIZES: Refer to page 303 for special production run minimum requirements.
Aircraft Fueling
ORDER CODES: 535-283 (black) 535-284 (blue) 535-285 (gray) Dispensing
535-286 (green) 535-289 (red) 535-290 (white) Dock
535-292 (brown) 535-551 (yellow)
Transfer

SPRAY
ULTRA-GRIP™
STEAM
ID NOM. OD MAX. WP BEND RADIUS WEIGHT
in. mm. in. mm. psi Mpa in. mm. lb./ft. kg./m. VACUUM
3/16 4.8 0.36 9.1 400 2.76 3 64 0.04 0.06
1/4 6.4 0.51 13.0 400 2.76 3 64 0.08 0.12 VEYANCE
3/8 9.5 0.67 17.0 400 2.76 3 76 0.13 0.19
1/2 12.7 0.76 19.3 400 2.76 5 127 0.14 0.21
WATER
5/8 15.9 0.93 23.6 400 2.76 6 152 0.19 0.28 Discharge
3/4 19.1 1.06 26.9 400 2.76 7 178 0.26 0.37 Suction &
1 25.4 1.34 34.0 400 2.76 8 203 0.34 0.51 Discharge
Washdown

WELDING

COUPLING
SYSTEMS

APPENDIX

37