Mod. B/EV: Testing Modules For Electrical Signalling Installations
Mod. B/EV: Testing Modules For Electrical Signalling Installations
FOR ELECTRICAL
SIGNALLING INSTALLATIONS
MS
Mod. B/EV
INTRODUCTION
This system has been designed so that students can assemble,
analyze and test a wide range of more and more complex
electric circuits; it consists of interchangeable modules; thus
merely connecting these modules with each other via flexible
leads supplied with the equipment enables to assemble
various circuits. Modules are made of insulating material
and they represent the support of the necessary devices for
implementing the experimental programme, besides offering
the graphic representation and standardized electric symbol
ELECTRICAL ENGINEERING
The set of modules for signalling installations has been designed TRAINING PROGRAM:
specifically to assemble, analyze and test electric systems of
• ringer controlled from a point
visual, sound warning,as well as interphone systems for civil
• ringing system with call and answer from 2 points
and service sectors. Modules can be inserted in bench mod.
• control system of two deviated ringers
398/EV to implement the training programme. As an alternative,
• ringing system for 2 flats and an outdoor station
vertical frame mod. TSI/EV can be used and the equipment can
• ringing system for flats with porter’s lodge and
be powered by power supply unit mod. AZ-1PH/EV (both these
electric lock
units are supplied separately, on demand).
• optical signalling system among offices
• optical signalling system among offices with floor indicator
• signalling system among offices of a multi-floor building
with two corridors per floor
• ringer for asking audience in offices
• signalling system for a school
• signalling system for a hotel
• signalling system for a hospital floor
• entry phone system with electric porter
• intercommunicating system with three intercoms
• intercommunicating system between three intercoms
and an outdoor station
23C-E-MS-B-0
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected] MS 19
TECHNICAL SPECIFICATIONS:
The set of modules for assembling the signalling installations
mod. B/EV includes:
• 1 Module AZ-1
- 2 switches for civil uses
• 2 Modules AZ-3
- 2 two-way switches for civil uses
MS
• 4 Modules AZ-5
- 2 pushbuttons for civil uses
• 1 Module AZ-10
- 5 board fuse-holders with breakable fuses of 4/6 A
• 1 Module AZ-15
- 1 transformer 115-230 / 12-24 V 50-60 Hz 72 VA
• 2 Modules AZ-16, AZ-17
- 2 ringers of 24 Vac for civil uses
• 2 Modules AZ-18
- 2 buzzers of 24 Vac
• 6 Modules AZ-19
- 2 lamp-sockets with warning lights of 24 V
• 1 Module AZ-20
- 1 three-button panel with lamps of 24 V
• 1 Module AZ-21
- 1 electric lock (coil of 12Vac)
• 4 Modules AZ-22
ELECTRICAL ENGINEERING
• 1 Module AZ-38
- 1 amplified outdoor station, 1 relay for excluding the
THEORETICAL-EXPERIMENTAL
outdoor station for intercommunicating calls
HANDBOOKS
Application handbook with exercises.
MS 20 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected]