Scribd
Upload
22 views1 page

Resiflow PL-210

Uploaded by

Devam Ponda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

Resiflow PL-210

Uploaded by

Devam Ponda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RESIFLOW® PL-210

FLOW CONTROL AGENT


FOR POWDER COATINGS 807 N. MAIN STREET (270) 395-4195 PHONE
P.O. BOX 127 (270) 395-5070 FAX
CALVERT CITY, KY 42029 USA
REVISION DATE: 18-March-2010 www.estron.com

GENERAL DESCRIPTION
Resiflow PL-210 is noted for its outstanding performance in extremely demanding powder coating
applications that require improved gloss, wet look and smoothness, compared to other classical type flow
control additives. The product is based on the liquid acrylic polymer Resiflow L-210 that has been
converted into free-flowing powder by adsorption onto silica-type filler. For best results, the material
should be dry-blended with other coating raw materials, then homogenized in a heated extruder. The
active ingredient is released and dispersed with the other components during extrusion resulting in a
uniform system.

Surface defects such as orange peel, craters, pinholes, and other imperfections can be minimized or
eliminated by incorporating 0.7-1.5% of Resiflow PL-210 into the premix with the other coating raw
materials. This product has reliable performance across the spectrum of binder chemistries including
polyesters, polyurethanes, hybrids, epoxies, and acrylics.

As with any silica supported flow control agent, Resiflow PL-210 should be thoroughly evaluated to
determine the best processing method and the optimum concentration of the additive, suitability for the
application, as well as to test compatibility and recoat adhesion.

TYPICAL PROPERTIES*
Appearance White Powder

Specific Gravity (25/25) 1.25 – 1.30

Activity, weight % 65% minimum

Non-Volatile, weight % 97% minimum


* Not to be used for specification purposes

REGULATORY LISTINGS
The components in this material are either listed or exempt from listing due to polymer exemption criteria
for the following chemical listing inventories: AICS (Australia), DSL (Canada), ECL (Korea), EINECS
(Europe), ENCS (Japan), IECSC (China), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA)

Resiflow PL-210 is compliant with 21 CFR 175.300. The finished coating must meet the extractive
requirements of 21 CFR 175.300. This aspect of compliance is the responsibility of the manufacturer or
user of the finished coating.

PACKAGING NET WEIGHT


55 lb. / 25 kg in fiberboard box with polyolefin liner

PRODUCT AVAILABILITY
This product is commercially available but may require lead time. Contact your Estron Sales
Representative.

STORAGE AND HANDLING


Keep container tightly closed and store in a dry, well ventilated area away from heat and sources of
ignition. Store at less than 100°F (38°C). Shelf life of unopened containers is one year from date of
shipment. See MSDS for detailed information.
Page 1 of 1

This information is not to be taken as warranty or representation for which we assume legal responsibility nor as permission or
recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Neither seller nor manufacturer shall be liable for any injury, loss or damage arising out of the use of the product.

You might also like