4K Video Conference Camera User Manual

4K Video Conference Camera

User Manual
English (V1.0)
Copyright Notice
All contents of this manual, whose copyright belongs to our Corporation cannot be cloned, copied or

translated without the permission of the company. Product specifications and information which

were referred to in this document are for reference only. We may change, delete, or update any

content at any time and without prior notice.

=============================================================================

This is class A production. Electromagnetic radiation at specific frequencies may affect the image
quality of TV in home environment.
4K Video Conference Camera User Manual

Catalogue

1 Note ............................................................................................................................ 1
2 Packing List ................................................................................................................ 1
3 Quick Start .................................................................................................................. 1
4 About Product ............................................................................................................. 2
4.1 Features .................................................................................................................................... 2

4.2 Product Specification ................................................................................................................. 2

4.3 Interfaces and Buttons .............................................................................................................. 4

4.4 Dimension ................................................................................................................................. 4

4.5 Remote Control ......................................................................................................................... 5

4.6 RS232 Interface ........................................................................................................................ 6

4.7 VISCA Network ......................................................................................................................... 7

4.8 Serial Communication Control ................................................................................................... 7

5 GUI Settings ............................................................................................................... 7

5.1 MENU........................................................................................................................................ 7

5.2 EXPOSURE .............................................................................................................................. 7

5.3 COLOR ..................................................................................................................................... 8

5.4 IMAGE....................................................................................................................................... 8

5.5 P/T/Z ......................................................................................................................................... 9

5.6 NOISE REDUCTION ................................................................................................................. 9

5.7 SETUP ...................................................................................................................................... 9

5.8 COMMUNICATION SETUP ...................................................................................................... 9

5.9 RESTORE DEFAULT .............................................................................................................. 10

6 Network Function ..................................................................................................... 10

6.1 Operating Environment ........................................................................................................... 10

6.2 Equipment Installation ............................................................................................................. 10

6.3 Internet Connection ................................................................................................................. 10

6.4 Camera Controlled by LAN ..................................................................................................... 10

6.4.1 Setup IP Address.................................................................................................................. 10

6.4.2 Visit/Access Camera ............................................................................................................ 11

6.5 Camera Controlled by WAN .................................................................................................... 12

4K Video Conference Camera User Manual

6.5.1 Setup IP Controlled by Dynamic DNS .................................................................................. 12

6.5.2 Dynamic DNS Visit Camera ................................................................................................. 12

6.5.3 VLC Stream Media Player Monitor ....................................................................................... 12

6.6 Camera Parameter Setup ....................................................................................................... 13

6.6.1 Homepage Introduction ........................................................................................................ 13

6.6.2 Video Settings ...................................................................................................................... 14

6.6.3 Image Settings ..................................................................................................................... 15

6.6.4 Audio Settings ...................................................................................................................... 16

6.6.5 System Settings ................................................................................................................... 16

6.6.6 Network Settings .................................................................................................................. 16

6.6.7 Device Information ............................................................................................................... 17

6.7 Download the Upgrade Program ............................................................................................. 17

7 Maintenance and Troubleshooting ........................................................................... 17

4K Video Conference Camera User Manual

environment to avoid any cover (plastic

1 Note material) damage. Make sure there is no
obstacle within rotation range.
 Electric Safety
Please never power on before installation is
Installation and operation must accord with
completed.
electric safety standard.
 Do not Dismantle the Camera
 Use Caution to Transport
We are not responsible for any unauthorized
Avoid stress, vibration or soakage in transport,
modification or dismantling.
storage and installation.
 Polarity of Power Supply
The power supply of this product is +12V, the Specific frequencies of electromagnetic field
max electrical current is 2A. Polarity of the may affect the image of the camera!
power supply plug drawing shows as below.
2 Packing List
When you unpack, check that all the supplied
accessories are included:
Name Quantity
Camera 1
 Installation Precautions
AC Power Adaptor 1
Do not grasp the camera lens when carrying it.
Power Cable 1
Don’t touch camera lens by hand. Mechanical RS232 Cable 1
damage may be caused by doing so. Remote Control 1
Do not use in corrosive liquid, gas or solid User Manual 1

3 Quick Start
1) Please check connections are correct before starting.

1
4K Video Conference Camera User Manual

2) Connect the power adapter to the power  Multiple Interfaces

connector on the rear panel of the camera. It supports HDMI 2.0 HD output, and also
The power indicator on the front panel of equipped with 3G-SDI interface, the effective
the camera is on. transmission distance up to 150 meters
3) After the camera is powered on, it starts to (1080P30). HDMI, 3G-SDI, USB 3.0, LAN can
initialize, right up to the limit position, and simultaneously output 4 channels of
then both horizontal and vertical go to the high-definition digital signals.
middle position, the motor stops running,  Remote Control
and the initialization is completed. Through the RS232 and RS485 serial ports,
(Note: If preset 0 is saved, PTZ will be the camera can be controlled remotely.
move to preset 0)  Intelligent Exposure
Effectively solve the impact of projection, TV
4 About Product and other equipment on the people who are
photographing.
4.1 Features
 4K Ultra HD
4.2 Product Specification
With a new generation of SONY 1/1.8-inch, 4K Video Conference
Name
maximum 8.42 million pixels high-quality UHD Camera
CMOS sensor, 4K (3840x2160) ultra-high Camera
resolution images are available. And backward HDMI: 4K/60, 4K/50,
compatible with 1080P, 720P and other 4K/30, 4K/25, 4K/59.94,
4K/29.97, 1080P/60,
resolutions.
1080P/50, 1080P/59.94,
 60° Wide-angle Lens + 20x Optical Zoom
1080P/30, 1080P/29.97,
Exclusively customized ultra-high resolution 1080I/60, 1080I/50,
4K super wide-angle lens, 20x optical zoom, 1080I/59.94, 720P/60,
horizontal field of view up to 60°. Signal System 720P/59.94
3G-SDI: 1080P/60,
 HDMI 2.0
1080P/50, 1080P/30,
Support HDMI 2.0 specification, can directly
1080P/29.97,
output 4K uncompressed digital video. 1080P/59.94, 1080P/25,
 Low Power Sleep Function 1080I/60, 1080I/50,
It supports low-power sleep/wake-up and 1080I/59.94, 720P/60,
720P/59.94
consumes less than 400mW in sleep mode.
1/1.8 inch, CMOS,
 Built-in Gravity Sensor Sensor
Max Effective Pixel: 8.42M
It supports image auto flip function for easy
Scanning Mode Progressive
installation and use.
20x, f = 6.25mm ~ 125mm,
 Low Light Lens
F1.58 ~ F3.95
The application of 2D and 3D noise reduction
Digital Zoom 16x
algorithm greatly reduces image noise. Even
Minimum 0.5 Lux @
under the condition of ultra-low illumination, it Illumination (F1.8, AGC ON)
still keep the picture clean and clear, and the Shutter 1/30s ~ 1/10000s
SNR of image is as high as 55dB.
Auto, Indoor, Outdoor,
White Balance
One Push, Manual, VAR

2
4K Video Conference Camera User Manual

Backlight 3840x2160, 1920x1080,

Support
Compensation First Stream 1280x720, 1024x576,
Digital Noise 2D & 3D Digital Noise Resolution 960x540, 640x480,
Reduction Reduction 640x360
Signal Noise 1920x1080, 1280x720,
≥55dB
Ratio 1024x576, 720x576 (50Hz
Horizontal Angle Second Stream support), 720x480 (60Hz
60° ~ 3.5°
of View Resolution support), 720x408,
Vertical Angle of 640x360, 480x270,
35.7° ~ 2.0° 320x240, 320x180
View
Horizontal Video Bit Rate 32Kbps ~ 51200Kbps
±170°
Rotation Range
Bit Rate Type Variable Rate, Fixed Rate
Vertical Rotation
-30° ~ +90° 50Hz: 1fps ~ 50fps,
Range Frame Rate
Pan Speed 60Hz: 1fps ~ 60fps
1.7° ~ 100°/s Audio
Range G711A, AAC
Tilt Speed Compression
1.7° ~ 69.9°/s
Range Audio Bit Rate 96K, 128K, 256K
H & V Flip Support TCP/IP, HTTP, RTSP,
Protocols RTMP/RTMPS, ONVIF,
Image Freeze Support
DHCP, SRT, Multicast
Number of
255 Input/Output Interface
Preset
AUDIO IN 1 x AUDIO IN: 3.5mm
Preset Accuracy 0.1°
Interface Audio Interface
USB Features LINE OUT 1 x LINE OUT: 3.5mm
Windows 7/8/10, Mac OS Interface Line Out Interface
Operate System 1 x RS485: 2pin phoenix
X, Linux, Android
Color System / YUY2 / MJPEG / H.264 / port, Max Distance:
Compression H.265 1200m, Protocol: VISCA /
 YUY2: Pelco-D / Pelco-P
max to 1080P@30fps 1 x RS232 IN: 8pin Min
 H.264 AVC/SVC: Communication DIN, Max Distance: 30m,
Video Format
max to 4K@60fps Interface Protocol: VISCA / Pelco-D
 MJPEG:
/ Pelco-P
max to 4K@30fps
1 x RS232 OUT: 8pin Min
USB Audio Support
DIN, Max Distance: 30m,
USB Video Protocol: VISCA network
UVC 1.1 ~ 1.5
Protocol use only
UVC PTZ Support 1 x RJ45: 10/100/1000M
Network
Adaptive Ethernet Port,
Network Features Interface
support PoE power supply
Video 1 x 3G-SDI: BNC type,
H.264/H.265/MJPEG 3G-SDI
Compression 800mVp-p, 75Ω. Along to
First Stream, Interface
Video Stream SMPTE 424M standard
Second Stream
HDMI Interface 1 x HDMI: Version 2.0

3
4K Video Conference Camera User Manual

1 x USB 3.0: Up to 4.4 Dimension

4K@60fps compressed
USB Interface
video and 1080P original
video can be output
Power Jack JEITA type (DC IN 12V)
Physical Parameter
Input Voltage DC 12V / PoE (802.3af)
Current
1.0A (Max)
Consumption
Operating
-10°C ~ 40°C
Temperature
Storage
-40°C ~ 60°C
Temperature
Power
12W (Max)
Consumption
MTBF ＞30000h
Size 146 x 146 x 164mm
Net Weight 1.7Kg

4.3 Interfaces and Buttons

Item Name
1 AUDIO IN Interface
2 LINE OUT Interface
3 System Select Switch
4 RS485 Interface
5 RS232 IN Interface
6 RS232 OUT Interface
7 Network Interface
8 HDMI Interface
9 USB 3.0 Interface
10 3G-SDI Interface
11 DC 12V Interface
12 Power Switch

4
4K Video Conference Camera User Manual

Key Description
1. Standby Key
Press this button to enter standby mode. Press
it again to enter normal mode.
Note: Power consumption in standby mode is
approximately half of the normal mode
2. Number Key
To set preset or call preset.
3. *Key
Used with other buttons.
4. Preset Key
Set preset: Store a preset position.
[SET PRESET] + Numeric button (0-9): Setting
a corresponding numeric key preset position.
5. HOME Key
4.5 Remote Control Confirm menu, enter the submenu or the PTZ
will back to the middle position after pressed it
6. Return Key
Return back the last level menu
7. Zoom Key
Slow Zoom: Zoom In [+] or Zoom Out [-] slowly
Fast Zoom: Zoom In [+] or Zoom Out [-] fast
8. Left/Right Setting Key
Press with 1 button and 2 button setting the
direction of the Pan-Tilt.
 Simultaneously press L/R Set + 1[STD]:
set the Pan-Tilt turn the same direction as
the L/R Set.
 Simultaneously press L/R Set + 2[REV]:
set the Pan-Tilt turn the opposite direction
as the L/R Set.
9. Focus Key
Used for focus adjustment.
Press [AUTO] adjust the focuses on the center
of the object automatically.
Press [MANUAL] adjust the focus on the
center of the object manual.
MANUAL button, and adjust it with [Far]
(Focus on far object) and [NEAR] (Focus on
near object).
10. Selection Key
Press the button corresponding to the camera
you want to operate with the remote controller.
11. #Key
Used with other buttons.
12. IR Remote Control Key
[*]+[＃]+[F1]: Address 1
[*]+[＃]+[F2]: Address 2
[*]+[＃]+[F3]: Address 3
[*]+[＃]+[F4]: Address 4

5
4K Video Conference Camera User Manual

13. Reset Key 4.6 RS232 Interface

Clear preset: Erase a preset position.
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the
preset individually.
14. PTZ Control Key
Press arrow buttons to perform panning and
tilting. Press [HOME] button to face the
camera back to front.
15. Menu Key
MENU: enter or exit OSD MENU.
16. Backlight Key
BLC ON/OFF: Press this button to enable the
backlight compensation. Press it again to No. Function
disable the backlight compensation. 1 DTR
NOTE: 2 DSR
 Effective only in auto exposure mode. 3 TXD
 If a light behind the subject, the subject 4 GND
will become dark. In this case, press the 5 RXD
backlight ON/OFF button. To cancel this
function, press backlight ON/OFF button. 6 GND
17. PTZ Reset Key 7 IR OUT
Preset Pan/Tilt self-test. 8 NC
18. Image Freezing Function The correspondence between the camera and
Manually freeze: Open the freezing function Windows DB-9 pin:
after press the remote control [F4], display
“Freeze” on the left upper corner character, Camera Windows DB-9
after five seconds display disappear 1.DTR 1.CD
automatically. If you want to cancel the freeze, 2.DSR 2.RXD
press [F4] key and then can return to normal, 3.TXD 3.TXD
display “Unfreeze” on the left upper corner, 4.GND 4.DTR
after five seconds display will disappear 5.RXD 5.GND
automatically. 6.GND 6.DSR
Recalling the Preset image Freeze: By the 7.IR OUT 7.RTS
OSD Menu “Image Freeze” to set recalling the 8.NC 8.CTS
preset image freeze function. After the function 9.RI
is opened, the screen will stay in before
Recalling the Preset when Recalling the The correspondence between the camera and
Preset, the screen can be switched to the the Mini DIN pin:
preset position screen until the camera points
to the preset position.
Camera Mini DIN
19. Shortcut Set 1.DTR 1.DTR
[*]+[＃]+[1]: OSD menu default English 2.DSR 2.DSR
[*]+[＃]+[3]: OSD menu default Chinese 3.TXD 3.TXD
[*]+[＃]+[4]: Display current IP address 4.GND 4.GND
[*]+[＃]+[6]: Quickly recover the default 5.RXD 5.RXD
[*]+[＃]+[8]: View the camera version 6.GND 6.GND
[*]+[＃]+[9]: Quickly set up inversion 7.IR OUT 7.NC
[*]+[＃]+[MANUAL]: Restore default IP 8.NC 8.NC
address

6
4K Video Conference Camera User Manual

4.7 VISCA Network

5 GUI Settings
5.1 MENU
Press [MENU] button to display the main menu
on the normal screen, using arrow button to
move the cursor to the item to be set. Press
the [HOME] button to enter the corresponding
sub-menu.
MENU
Exposure
Color
Image
4.8 Serial Communication Control P/T/Z
Noise Reduction
 RS232 Communication Control
Setup
The camera is controlled via RS232. The
Communication Setup
RS232 serial port parameters are as follows: Restore Default
Baud rate: 2400/4800/9600/38400;
Starting Position: 1 bit [Home] Enter
[Menu] Exit
Data bit: 8 bits
Stop bit: 1 bit 5.2 EXPOSURE
Check digit: None
Move the main menu cursor to [EXPOSURE],
 RS485 Communication Control
and press [HOME] key enter the exposure
Control camera via RS485, half duplex mode: page, as shown in the following figure.
Baud rate: 2400/4800/9600/38400;
EXPOSURE
Starting position: 1 bit
Mode Auto
Data bit: 8 bits ExpCompMode On
Stop bit: 1 bit ExpComp +1
Check digit: None Backlight Off
After power on, the camera goes to the upper Gain Limit 15
Anti-Flicker 50Hz
right limit and then back to the middle position.
Meter Average
The zoom lens is pulled to the farthest position, DRC 0
auto focus, and the aperture is adjusted to the
default value. If the camera has preset 0 saved, Select Item
the camera will be set to position 0 after the Change Value
[Menu] Back
initialization is completed. At this point, the
user can use the serial port command to Mode: Exposure mode, optional items: Auto,
control the camera. Manual, SAE, AAE, Bright.
ExpCompMode: Exposure the compensation
mode, optional items: On, Off (Effective only in
Auto mode).

7
4K Video Conference Camera User Manual

ExpComp: Exposure the compensation value, WB-Mode: White balance mode, optional
optional items: -7 ~ 7 (Effective only in items: Auto, Indoor, Outdoor, One Push,
ExpCompMode item to On). Manual, VAR.
Backlight: Set the backlight compensation, RG Tuning: Optional items: 0 ~ +10 (Effective
optional items: On, Off (Effective only in Auto only in Auto mode); -10 ~ +10 (Effective only in
mode). One Push, VAR mode).
Bright: Intensity control, optional items: 0 ~ 17 BG Tuning: Optional items: 0 ~ +10 (Effective
(Effective only in Bright mode). only in Auto mode); -10 ~ +10 (Effective only in
Gain Limit: Maximum gain limit, optional items: One Push, VAR mode).
0 ~ 15 (Effective only in Auto, SAE, AAE, Saturation: Optional items: 60% ~ 200%.
Bright mode). Hue: Optional items: 0 ~ 14.
Anti-Flicker: Anti-flicker, optional items: Off, AWB Sens: The white balance sensitivity,
50Hz, 60Hz (Effective only in Auto, AAE, Bright optional items: Low, Middle, High.
mode). RG: Red gain, optional items: 0 ~ 255
Meter: Optional items: Average, Center, Smart, (Effective only in Manual mode).
Top. BG: Blue gain, optional items: 0 ~ 255
Iris: Aperture value, optional items: F1.8, F2.0, (Effective only in Manual mode).
F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, Color Temp: Optional items: 2500K ~ 8000K
F9.6, F11.0, Close (Effective only in Manual, (Effective only in VAR mode).
AAE mode). 5.4 IMAGE
Shutter: Optional items: 1/30, 1/60, 1/90, 1/100,
Move the main menu cursor to [IMAGE], and
1/125, 1/180, 1/250, 1/350, 1/500, 1/725,
press [HOME] key enter the image page, as
1/1000, 1/1500, 1/2000, 1/3000, 1/4000,
shown in the following figure.
1/6000, 1/10000 (Effective only in Manual,
SAE mode). IMAGE
Gain: Optional items: 0 ~ 7 (Effective only in Luminance 7
Contrast 7
Manual mode).
Sharpness Auto
DRC: DRC strength, optional items: 0 ~ 8. Flip-H Off
5.3 COLOR Flip-V Off
B&W-Mode Off
Move the main menu cursor to [COLOR], and Gamma EXT
press [HOME] key enter the color page, as Style Default
shown in the following figure.
Select Item
COLOR Change Value
WB Mode Auto [Menu] Back
RG Tuning +2
BG Tuning +1 Luminance: Brightness adjustment, optional
Saturation 110% items: 0 ~ 14.
Hue 7 Contrast: Contrast adjustment, optional items:
AWB Sens High 0 ~ 14.
Sharpness: Sharpness adjustment, optional
Select Item
Change Value items: Auto, 0 ~ 15.
[Menu] Back
8
4K Video Conference Camera User Manual

Flip-H: Image flipped horizontally, optional 5.6 NOISE REDUCTION

items: On, Off.
Move the main menu cursor to [NOISE
Flip-V: Image Flip Vertical, optional items: On,
REDUCTION], and press [HOME] key enter
Off.
the noise reduction page, as shown in the
B&W-Mode: Optional items: On, Off.
following figure.
Gamma: Optional items: EXT, PC, 0.48,
0.5, 0.56, 0.63. NOISE REDUCTION
Style: Optional items: Default, Norm, Bright, NR2D-Level Auto
NR3D-Level Auto
PC.
5.5 P/T/Z Select Item
Change Value
Move the main menu cursor to [P/T/Z], and
[Menu] Back
press [HOME] key enter the P/T/Z page, as
NR2D Level: 2D noise reduction, optional
shown in the following figure.
items: Off, Auto, 1 ~ 5.
P/T/Z NR3D Level: 3D noise reduction, optional
SpeedByZoom On
items: Off, Auto, 1 ~ 8.
AF-Zone Front
AF-Sense High 5.7 SETUP
L/R Set STD
Display Info On Move the main menu cursor to [SETUP], and
Image Freeze Off press [HOME] key enter the setup page, as
Digital Zoom Off shown in the following figure.
Call Preset Speed 24
Pre Zoom Speed 5 SETUP
Language EN
Select Item DVI Mode DVI
Change Value Auto Scan Shoot Off
[Menu] Back Auto Inversion Off
SDI-3G Mode LEVEL-A
SpeedByZoom: The depth of field scale switch, Tally Mode On
optional items: On, Off.
AF-Zone: Interested in focusing area, optional Select Item
Change Value
items: Front, Top, Center, Bottom.
[Menu] Back
AF-Sense: Automatic focusing sensitivity
options, optional items: Low, Normal, High. Language: Optional items: EN, Chinese,
L/R Set: Optional items: STD, REV. Russian.
Display Info: Optional items: On, Off. DVI Mode: Optional items: DVI, HDMI.
Image Freeze: Optional items: On, Off. Auto Scan Shoot: Optional items: On, Off.
Digital Zoom: Optional items: Off, 2x, 4x, Auto Inversion: Optional items: On, Off.
8x, 16x. SDI-3G Mode: Optional items: LEVEL-A,
Call Preset Speed: Optional items: 1 ~ 24. LEVEL-B.
Pre Zoom Speed: Optional items: 0 ~ 7. Tally Mode: Optional items: On, Off.
5.8 COMMUNICATION SETUP
Move the main menu cursor to
[COMMUNICATION SETUP], and press
9
4K Video Conference Camera User Manual

[HOME] key enter the communication setup

page, as shown in the following figure. 6 Network Function
COMMUNICATION SETUP
6.1 Operating Environment
Protocol VISCA
V_Address 1 Operating System: Windows 7/8/10, Mac OS X,
V_AddrFix Off Linux, Android
Net Mode Serial Network Protocol: TCP/IP
Baudrate 9600
Client PC: P4/128M RAM/40G HDD/ support
Select Item scaled graphics card, support DirectX 8.0 or
Change Value more advanced version.
[Menu] Back
6.2 Equipment Installation
Protocol: Control protocol type, optional items:
1) Connect video conference camera to your
Auto, VISCA, PELCO-D, PELCO-P.
V_Address: Optional items: 1 ~ 7. internet or to your PC via network cable.
(Effective only in Auto, VISCA protocol). 2) Turn on DC 12V power.
V_AddrFix: Optional items: On, Off (When set
3) If the network connection is normal, the
to On, useless in 88 30 01 FF Command).
P_D_Address: Optional items: 0 ~ 254. connection light (green) at the network
(Effective only in Auto, PELCO-D protocol). interface will light up within 5 seconds, and
P_P_Address: Optional items: 0 ~ 31.
the data indicator (orange) will flash,
(Effective only in Auto, PELCO-P protocol).
Net Mode: Set the serial port network control, indicating that the physical connection of
optional items: Serial, Paral. the camera has been completed.
Baudrate: Serial port baud rate, optional items:
6.3 Internet Connection
2400, 4800, 9600, 38400.
There are two main ways to connect video
5.9 RESTORE DEFAULT
conference camera.
Move the main menu cursor to [RESTORE
DEFAULT], and press [HOME] key enter the
restore default page, as shown in the following
figure.
RESTORE DEFAULT
Connect by Network Cable
Restore? No

Change Value
[Home] OK
[Menu] Back
Restore: Confirm restore factory settings,
Connect by Switch/Router
optional items: Yes, No.
Note: Press [HOME] button to confirm, all 6.4 Camera Controlled by LAN
parameter restore default, include IR Remote 6.4.1 Setup IP Address
address and VISICA address.
10
4K Video Conference Camera User Manual

If you don't know camera IP, view as below: Method 2: Open “upgrade_En.exe”, change IP
Method 1: Press * and # and 4 on remote and click “Set”. After modified, the video
controller one by one, the camera IP address conference camera will be restart.
will be shown on screen.
Method 2: Connect camera to PC with network
cable, use “upgrade_En.exe” to search for IP
address.

Change IP address, two methods as below:

Method 1: Login the web page, select
“Network > Lan Settings”, change IP address,
subnet mask and gateway. Click “Apply” and
restart the camera. Change IP address:
Step 1 Search the IP address of camera.

Step 2 Select the camera IP of you want to

change.
Step 3 Select the config dialog of upgrade
applets.
Step 4 Change the IP address, netmask and
gateway, then click “Set”.
Step 5 Finish.
6.4.2 Visit/Access Camera
Input http://192.168.100.88 to IE (better with IE
web browser, others will cause little latency), a
login window pop up, input username: admin,
password: admin, shown as below:

After login, shown as below:

11
4K Video Conference Camera User Manual

6.5.2 Dynamic DNS Visit Camera

Set domain name to camera, setup the
parameter, then dynamic DNS can access
camera. Access link: http://hostname: port
number. For example, setup host computer
name: youdomain.f3322.org, the camera port
number is 89, the access link should be
http://youdomain.3322.org:89.

If user first time use this camera by internet

(only for new user), must install a player If the camera port default is 80, then
software (VLC). Please go to VLC website unnecessary to input port number, use host
http://www.videolan.org/vlc/#download and name can access camera directly.
Install the 32-bit VLC (player software). After 6.5.3 VLC Stream Media Player Monitor
installation, login again, will show as above.
Visit VLC Media Server Procedure
6.5 Camera Controlled by WAN Step 1 Open VLC media player.
6.5.1 Setup IP Controlled by Dynamic DNS Step 2 Click “Media > Open Network Stream”,
Two dynamic DNS: Dyndns.org, 3322.org.
or click “Ctrl + N”; as below:
Router Port Mapping:
Take Tenda router for example, enter the
Router Home Page (interface page), select
“Advanced”- “Virtual Server”, add a new port
number in “Ext Port”, add a new port number in
“Int port”, put camera IP address to “Internal
IP”, then select “Save”, shown as below:

Step 3 Input URL address:

rtsp://ip: port number/1 (First stream);
rtsp://ip: port number/2 (Second
stream).
Step 4 Click “Play”.
12
4K Video Conference Camera User Manual

B. PTZ Setup

RTSP port number default 554. If the camera

port default is 80, then unnecessary to input
port number of URL address.

6.6 Camera Parameter Setup

1) Pan and Tilt Control
6.6.1 Homepage Introduction
Up, Down, Left and Right arrows and the home
Menu button allow you to manually drive the camera
All pages include two menu bars: to the desired position.
Real time monitoring: displaying video image 2) Zoom
Parameter setup: with function buttons.
Zoom In and Zoom Out buttons allow for wide
A. Video Viewing Window or narrow view of the space.
Video viewing window must be same as video 3) Focus
resolution, the bigger the resolution is, the
Focus In and Focus Out buttons allow for fine
bigger the playing area is. Double click viewing
manual focus adjustment if the camera has
window, will show full-screen, double click
any problems auto focusing on the difficult
again, will return to initialized size.
object.
Status bar in viewing window shown as below:
4) PTZ Speeds
Pan speed can be set at any rate between
1) Video playback pause button: control 1 ~ 24, Tilt speed can be set at any rate
real-time video pause, stop the last picture, between 1 ~ 20. Zoom and Focus speeds can
click recoverable video again. be set at any rate between 0 ~ 7.
5) PTZ Presets
2) Audio control buttons: can adjust the
After manually setting up a shot that you would
volume or set silent mode.
like to return to later, you can save presets for
3) Full screen switch button. quick recall of these positions. Type a number
between 0 and 254 into the Preset box.

13
4K Video Conference Camera User Manual

Click the "Set" button to save the current 6.6.2 Video Settings
location with that preset number. Click the
“Call” button to cause the camera to return to
that position. This enables smooth, quick and
convenient control without the need to
manually drive the camera.
You can set up preset that user want as below.
Method 1: Type a number into the Preset box.

Preset: Optional items: 0 ~ 254.

Method 2: Type the name into the Presets
Information.

Click “Set” button, when PTZ turn to other

position, click “Call” button or click “No.” of the
Presets Information, PTZ will turn back to
preset position.
6) PTZ / OSD Dropdown
From the dropdown menu, clicking the OSD 1) Video Format
option will open the on-screen display menu of Support 50Hz (PAL) and 60Hz (NTSC), and
the camera giving you control from within the Dial Priority three formats.
IP interface. 2) Encode Level
C. Language Selection Support baseline, mainprofile, highprofile and
svc-t four levels.
3) Encode Protocol
Support H.264, H.265 and MJPEG three
Click either “Chinese”, “English” or “Russian”
protocols.
to change the language of the webpage.

14
4K Video Conference Camera User Manual

4) Resolution 11) Split Mode

First stream support 3840x2160, 1920x1080, Select split mode, optional items: Fixed blocks,
1280x720, 1024x576, 960x540, 640x480, Fixed bytes.
640x360. Second stream support 1920x1080, 12) Slice Size
1280x720, 1024x576, 720x576 (50Hz support), Set the size of slice.
720x480 (60Hz support), 720x408, 640x360,
6.6.3 Image Settings
480x270, 320x240, 320x180; The bigger
resolution is, the clearer the image will be,
more network bandwidth will be taken.
5) Bit Rate
The user can specify the bit rate. Generally
speaking, the larger of the bit rate, the clearer
of the image. However, the configuration of the
bit rate needs to be combined with the network
bandwidth. When the network bandwidth is
narrow and the bit rate is configured larger, the
video stream cannot be transmitted normally,
and the visual effect is worse.
6) Frame Rate
User can specify the size of the frame rate,
generally, the frame rate greater, the image
more smooth; Frame rate is smaller, the more
sense of beating. 1) Brightness
7) I Key Frame Interval Image bright 0 ~ 14, slider control, on the right
Set interval between 2 I frame, the bigger shows the corresponding numerical.
interval is the response will be lower from Default value is 7.
viewing window. 2) Saturation
8) Bit Rate Control Saturation 0 ~ 14, slider control, on the right
Code stream control way: shows the corresponding numerical.
Constant Bit Rate: Video coder will be coding Default value is 5.
according to preset speed. 3) Contrast
Variable Bit Rate: Video coder will adjust the Contrast 0 ~ 14, slider control, on the right
speed based on preset speed to gain the best shows the corresponding numerical.
image quality. Default value is 7.
9) Fluctuate Level 4) Sharpness
Restrain the fluctuation magnitude of variable Sharpness 0 ~ 15 and auto, slider control, on
rate, grade 1 ~ 6. the right shows the corresponding numerical.
10) Slice Split Enable Default value is auto.
Enable or disable slice split function.

15
4K Video Conference Camera User Manual

5) Hue 6.6.5 System Settings

Hue 0 ~ 14, slider control, on the right shows
the corresponding numerical.
Default value is 7.
6) Flip & Mirror
Tick Flip to realize image upside down, tick
mirror to realize image around the mirror.
Default value is not tick.
6.6.4 Audio Settings
1) Work Mode
The default work mode is RTSP.
Optional items: RTSP, SDK, Multicast.
2) Reboot
Click the “Reboot” button, system restart.
3) Username and password
The user can modify the password (letters and
Numbers only).
6.6.6 Network Settings

1) Audio Switch
Enable or disable audio switch.
2) Audio Type
Optional items: G711A, AAC.
3) Sample Rate
Optional items: 44.1K, 48K.
4) Bit Rate
Optional items: 96K, 128K, 256K.
5) Input Type
Optional items: Line in.
6) Input Vol L
The volume of the left channel.
7) Input Vol R
The volume of the right channel.
8) ADTS Options
Optional items: On, Off.

16
4K Video Conference Camera User Manual

1) Lan Settings (default value is 6688, then 6688 is the

Default the IP address is 192.168.100.88, the multicast port of the first stream; 6690 is the
MAC address cannot be modified. multicast port of the second stream).

2) Port Settings 8) SDK Settings

Turn On/Off active connection. Setting SDK
A. HTTP Port
address (default value is 192.168.100.138)
IP address identifies the network device, the
and port (default value is 1234).
device can run multiple web applications, each
9) NTP Settings
network program using network port to
transmit data, so data transmission to be Turn On/Off NTP time sync, main time show
carried out between the port and port. Port and sub time show. Setting NTP server
setting is to set up web server program using address, time interval, main stream position
which port to transmit. When port mapping, and sub stream position.
need to be consistent with the port number 6.6.7 Device Information
(default port: 80). Display the current device information.
B. RTSP Port
The video conference camera support RTSP
protocol, use the VLC tools broadcast, default
port: 554.
C. PTZ Port
Support TCP connection then control camera,
default port: 5678.
6.7 Download the Upgrade Program
D. UDP Port
If you need the camera upgrade program,
Support UDP protocol, default port: 1259. please contact the manufacturer.
3) Control Protocol Settings
Setting the camera control communication
7 Maintenance and
protocol, include Visca address, Pelco-D Troubleshooting
address and Pelco-P address.
Camera Maintains
4) RTMP(S) Settings
 If camera will not be used for a long time,
Setting the MRL of RTMP, select enable or
please turn off power switch, disconnect
disable video and audio. You can select control
code stream of “On”, “Off”, “Video”, “Audio” AC power cord of AC adaptor to the outlet.
between in the two streams.  Please use soft cloth or tissue to clean the
5) RTSP Settings
camera cover.
Turn On/Off RTSP auth.
 Please use the soft dry cloth to clean the
6) ONVIF Settings
lens. If the camera is very dirty, clean it with
Turn On/Off ONVIF and ONVIF auth.
7) Multicast Settings diluted neuter detergent. Do not use any

Turn On/Off multicast. Setting the multicast type of solvents, which may damage the
address (default value is 224.1.2.3) and port surface.
17
4K Video Conference Camera User Manual

Unqualified Application  Unable to access video conference camera

 No shooting extreme bright object for a long through IE Browser
period of time, such as sunlight, light 1) Using PC to access the network to test
sources, etc. whether the network access can work
properly, first of all, the network fault
 No operating in unstable lighting conditions,
caused by the PC virus can be eliminated,
otherwise image will be flickering. until the PC and video conference camera
 No operating close to powerful can communicate with each other Ping.
electromagnetic radiation, such as TV or 2) Disconnect the network, connect video
conference camera and PC separately,
radio transmitters, etc.
and reset the IP address of PC.
Troubleshooting 3) Check IP address, subnet mask, and
Image gateway settings for video conference
 The monitor shows no image camera.
1) Check that the camera power supply is 4) Check whether the MAC address is
connected, the voltage is normal, and the conflicts.
power indicator light is always on. 5) Check whether the web port is modified.
2) Turn off the power switch to check whether The default is 80.
the camera is self-testing.  Forget the IP address or login password
3) Check the cable of video platform and TV Please remember (The default IP address:
whether correct connection. 192.168.100.88; default user name: admin;
 Sometimes without the image default password: admin).
Check the cable of video platform and TV Control
whether correct connection.  Remote control cannot control
 Image have jitter when the camera lens at 1) Check and replace the new battery for the
max multiple remote controller.
2) Check whether the camera working mode
1) Check whether the camera installed
is correct.
position be stabled.
3) Check whether the address of remote
2) Check whether have vibrating machinery
control can match the camera.
or object near the camera.
 Serial port cannot control
 There is no video image in IE Browser
1) Check whether the camera protocol,
Please visit VLC website
address and baud rate such is the same.
(http://www.videolan.org/vlc) download and
2) Check whether the control line is
install the 32-bit VLC media player, after it
connected well.
installed, visit video conference camera will
have normal image display.

079.79.1100789_V1.0

18