SUBARU

FORESTER
Model Year: 1998-2018
Chassis Code: SF/SG/SH/SJ

www. cuscousainc .com

 2 Content
06 COILOVER SUSPENSION KIT 14
Monotube/Twin Tube Coilover System 06
Damper Basic Setting 07
Street Zero-A Coilover - Single Adjustment Twin Tube 08
Street Zero Coilover - Single Adjustment Twin Tube 09
Touring A Coilover - Single Adjustment Twin Tube 10
e-Con2 for Street Zero-A 11

12 SUSPENSION COMPONENTS 21
Front Camber Adjustable Pillow Ball Upper Mount Set 12
Reart Camber Adjustable Pillow Ball Upper Mount Set 12
Front Pillow Ball Stabilizer End Link 12
Rear Pillow Ball Stabilizer End Link 13
Auto Levelizer Adjusting Rod 13
Front Sway Bar 14
Rear Sway Bar 14

15 LSD - LIMITED SLIP DIFFERENTIALS 21

Type-RS 15
Type-MZ 15
Spec-F 16
PRO Adjust LSD 16
First Generation 1998 - 2002 (SF) 17
Second Generation 2003 - 2008 (SG) 18
Third Generation 2009 - 2013 (SH) 20
Fourth Generation 2014 - 2018 (SJ) 21

2 cuscousainc.com
 3 Content
22 CLUTCH SYSTEM 30
Twin Metal Clutch System 22
Single Clutch System : Pull Type 22
Copper Single Set 23
Copper Single Disk 23
Metal Clutch Set 24
Metal Disk 24
Clutch Cover 25
Chromoly Flywheel 25
Stainless Mesh Clutch Line 26

27 STRUT TOWER BRACES 28

OS Type 27
ST Type 27
OS Type 1 / OS Type 2 27
AS Type 27

29 POWER BRACES 36
Front Lower Arm Bar 30
Rear Lower Arm Bar 30
Second Generation 2003 - 2008 (SG) 31
Rear Subframe Brace 33
Third Generation 2009 - 2013 (SH) 34
Fourth Generation 2014 - 2018 (SJ) 36

3 cuscousainc.com
 4 Content
37 DRIVETRAIN PARTS 37
Reinforced Differential Carrier 37

38 ENGINE PARTS 40
Engine Pitching Stopper 38
High Pressure Radiator Cap 38
Magnetic Oil Filter 38
Neodymium Magnetic Oil Drain Plug 39
Battery Tie-Down 39
Earth Grounding Kit 39
Radiator Cooling Plate 40
Air Intake Silicon Hose 40
Turbo Heat Shild 40
Exhaust Muffler Hanger 40

41 SPORTS EQUIPMENT 45
Tow Strap : Vertical mount 41
Tow Strap : Horizontal mount 41
Front Folding Tow Hook 41
Drift Knob 42
Engine Start Ring Cover 42
Sports Accel Pedal 42
FIA Racing Safety Harness Set - 6 point 43
FIA Racing Safety Harness Set - 4 point 45

4 cuscousainc.com
 5 Content
46 CUSCO X BRIDE SEATS 48
Full Bucket Seat - ZETA IV 46

Full Bucket Seat - ZIEG IV 46

Full Bucket Seat - ZIEG IV WIDE 46

Full Bucket Seat - A.i.R. 46

Full Bucket Seat - Seat Rail 47

Reclining Seat - STREAMS 48

Reclining Seat - STREAMS CRUZ 48

Reclining Seat - Seat Rail 49

50 FUJITSUBO EXHAUSTS 53
Legalis - R for SF 50

Legalis Super - R for SF 50

Legalis - R for SF 50

Legalis R Type Evolution for SG 51

Legalis Super - R for SG 51

Super EX Basic Version for SG 51

Authorized - S for SH 52

Authorized - R for SH 52

Authorized - S for SJ 53

5 cuscousainc.com
06 Coilover

Full Length Height Adjustable Coilover Preload Height Adjustable Coilover Mono-Tube Twin Tube
Lowered Lowered
Amount Piston Rod Piston Rod
Amount

Spring Preload
unchanged
Low Pressure Gas

Outer Shell Outer Shell

Spring Preload Piston Valve Piston Valve

will be reduced

Oil Inner Shell

Floating Piston Oil

Current After Current After
Height Lowering Height Lowering Gas Chamber Base Valve

There are two main design structures of the suspension coilover system.
Both these structures enable vehicle height change, however, the Two types of shock absorbers are used in the
method of doing so varies. Cusco Suspension product lineup.

When adjusting the ride height on the Preload height adjustment The Mono-Tube shock absorber has a single
coilover, some of the shock stroke length or spring preload must be cylinder which is completely divided into a fluid
compromised. Height is adjusted by turning the spring lock perch. area and gas chamber. This design enables the
utilization of a larger piston valve and stronger
When adjusting the ride height on the Full Length Height Adjustable outer shell. Mono-Tube is recognized as a shock
Coilover, the shock stroke length and the spring preload remains absorber that can handle marginal input from the
unchanged. Height is adjusted by turning the bottom case lock nut. road surface with its high speed piston capabilities.

A full length ride height adjustable system enables vehicle ride height The Twin Tube shock absorber has two separated
adjustment without disturbing the spring preload configuration. chambers where the inner chamber regulates the
vertical movement of the shock shaft, and the
Fig 1 : Full ride height adjustment ability by adjusting lock nut (B) at the bracket. The outer cylinder acts as an hydraulic fluid reservoir.
spring-load lock nut (A) remains untouched, providing full shock absorber stroke length Twin Tube is ideal for street and best known for
(C). comfort, as well as its long lasting features.
Fig 2 : The preload spring rate can be adjusted without changing the vehicle ride height.
Twin Tube shock absorbers have two separated
Fig. 1 Fig. 2
fluid areas where the inner cylinder controls the
Preload Position
vertical movement of the piston and shaft. The
outer cylinder works as an hydraulic fluid reservoir
Ride Height change only. The nitrogen gas and base valves provide
fluid flow control between the cylinders while the
Stroke Volume main piston valve controls most of the dampening.
The Twin Tube features a longer stroke and longer
Preload gain lasting compared to the mono-tube. The twin
The preload spring rate can
BRACKET be adjusted without changing valve setup is ideal for passenger comfort.
the vehicle ride height

06 suspension.cuscousainc.com
07 Coilover
Entering Corner ( Braking ) : Over steer
REBOUND COMPRESSION
HARD › Adjust to Harder side on Front / Compression
› Adjust to Harder side on Rear / Rebound
HARD

REAR FRONT

Entering Corner ( Braking ) : Under steer

REBOUND COMPRESSION
SOFT › Adjust to Softer side on Front / Compression SOFT
› Adjust to Softer side on Rear / Rebound

REAR FRONT

Exiting Corner ( Accelerating ) : Over steer

COMPRESSION
REBOUND
SOFT › Adjust to Softer side on Front / Rebound SOFT
› Adjust to Softer side on Rear / Compression

REAR FRONT

Exiting Corner ( Accelerating ) : Over steer

COMPRESSION
REBOUND
HARD › Adjust to Harder side on Front / Rebound HARD
› Adjust to Harder side on Rear / Compression

REAR FRONT
07 suspension.cuscousainc.com
08 Coilover
Second Generation 2003 - 2008 (SG)
Twin-Tube models Adjustable for comfort at any driving stage
Part No. 676 61N CN Price $1,700.00

FRONT REAR
6Kg/mm 4Kg/mm
Spring Rate:
(Optional: 5, 7, 8Kg/mm) (Optional: 3.5, 5, 6Kg/mm)
Max Ride Height Range: -100 to -35 mm -95 to -15 mm

Third Generation 2009 - 2013 (SH)

Twin-Tube models Adjustable for comfort at any driving stage
Part No. 667 61N CN Price $1,600.00

FRONT REAR
6Kg/mm 5Kg/mm
Spring Rate:
(Optional: 7, 8Kg/mm) (Optional: 6Kg/mm)
Max Ride Height Range: -130 to -5 mm -80 to -10 mm

Fourth Generation 2014 - 2018 (SJ)

Twin-Tube models Adjustable for comfort at any driving stage
Part No. 697 61N CN Price $1,600.00
PRODUCT INFORMATION
► Twin-Tube Construction
FRONT REAR
► Designed for Competition 6Kg/mm 5Kg/mm
► 40 Step Adjustment Range Spring Rate:
(Optional: 7, 8Kg/mm) (Optional: 6Kg/mm)
► Full Length Ride Height Adjustable Max Ride Height Range: -130 to -5 mm -85 to -10 mm
► Inverted Piston Design
► Rear Upper Mount Pillowball Bushing
OPTIONAL:
Front Camber/Caster Adjustable Pillowball Upper Mount: $200.00 additional.

08 suspension.cuscousainc.com
09 Coilover
Second Generation 2003 - 2008 (SG)
Full height adjustable coilovers for a wide range of setting
Part No. 676 61P CN Price $1,480.00

FRONT REAR
6Kg/mm 4Kg/mm
Spring Rate:
(Optional: 7, 8Kg/mm) (Optional: 3.5, 5, 6Kg/mm)
Max Ride Height Range: -115 to 0 mm -95 to -5 mm

Third Generation 2009 - 2013 (SH)

Twin-Tube models Adjustable for comfort at any driving stage
Part No. 677 61P CB Price $1,220.00

FRONT REAR
6Kg/mm 5Kg/mm
Spring Rate:
(Optional: 7, 8Kg/mm) (Optional: 6, 7, 8Kg/mm)
Max Ride Height Range: -130 to -20 mm -65 to -5 mm

PRODUCT INFORMATION Fourth Generation 2014 - 2018 (SJ)

► Twin-tube Construction Twin-Tube models Adjustable for comfort at any driving stage
► Full Length Ride Height Adjustable Part No. 697 61P CB Price $1,220.00
► Rear Upper Mount H/D Rubber Bushing
FRONT REAR
OPTIONAL: 6Kg/mm 5Kg/mm
* Rear Pillow Upper option for SG Chassis: Spring Rate:
(Optional: 7, 8Kg/mm) (Optional: 6Kg/mm)
CP1 / $100 additional Max Ride Height Range: -134 to -28 mm -65 to -5 mm
2.0 XT (Chassis SJG)
-134 to -28 mm -65 to -5 mm
Max Ride Height Range:

09 suspension.cuscousainc.com
10 Coilover
Third Generation 2009 - 2013 (SH)
Touring A Suspension
Part No. 677 65T FR Price $780.00
* Complete Set - Front & Rear
* OE Direct Replacement type Shock Absorber
* +40% Max. higher dampening rate than OE

Third Generation 2009 - 2013 (SH)

Touring A Suspension [Front Set]
Part No. 677 65T F Price $420.00
* Front only
* Re-use Factory Upper mounts, OE Shape Spring
* +40% Max. higher dampening rate than OE

Third Generation 2009 - 2013 (SH)

Touring A Suspension [Rear Set]
Part No. 677 65T R Price $360.00
* Rear only
* Re-use Factory Upper mounts, OE Shape Spring
* +40% Max. higher dampening rate than OE

Fourth Generation 2014 - 2018 (SJ)

Touring A Suspension for Chassis SJ: 2014 - 2018
Part No. 697 65T FR Price $780.00
* Complete Set - Front & Rear
* OE Direct Replacement type Shock Absorber
* +40% Max. higher dampening rate than OE

Fourth Generation 2014 - 2018 (SJ)

Touring A Suspension [Front Set] for Chassis SH: 2009 - 2013
Part No. 697 65T F Price $420.00
* Front only
* Re-use Factory Upper mounts, OE Shape Spring
* +40% Max. higher dampening rate than OE

Fourth Generation 2014 - 2018 (SJ)

Touring A Suspension [Rear Set] for Chassis SH: 2009 - 2013
Part No. 697 65T R Price $360.00
* Rear only
* Re-use Factory Upper mounts, OE Shape Spring
* +40% Max. higher dampening rate than OE

PRODUCT INFORMATION
OEM configuration replacement shock with 40-way damper adjustment
OEM UPGRADE Shock Absorber Set available from CUSCO!
Enhances comfort and improves the sport driving experience.
Features 40-way adjustable shock dampening and retain factory ride height.

10 suspension.cuscousainc.com
11 Coilover
For Street ZERO-A
Part No. 00B 60J 1014 Price $475.00

For Touring A
Part No. 00B 60J 1012 Price $475.00

PRODUCT INFORMATION
With the E-Con2 controller, you can adjust the dampening force while in the driver’s seat!
Compatible with Cusco Street ZERO-A & Street Spec-A suspension coil-over systems.
Fully customizable pre-set memory system (soft to hard) at a push of a button when changing
the damper setting per environment. Damping force adjustable, 40 way adjustment for the
front and rear suspension, independently.
New larger LCD display features horizontal or vertical view plus 7 different colors to choose
from to match the rest of your interior lighting.
Dimensions: W47xH91xD13mm
The optional G-Sensor enables G force display from lateral (left right) and acceleration (front)
braking (rear).

G Sensor
Part No. 00B 60J G Price $98.00

PRODUCT INFORMATION
G Sensor feature for e-Con2

11 suspension.cuscousainc.com
12 Suspension
First Generation 1998 - 2002 (SF)
Front Camber Adjustable Pillow Ball Upper Mount Set
Part No. 658 410 A Price $320.00
* Pillow Nut : H4 / Pillow Collar : 35

First Generation 1998 - 2002 (SF)

Rear Camber Adjustable Pillow Ball Upper Mount Set
Part No. 658 420 A Price $320.00
* Pillow Nut : I / Pillow Collar : 01
* Need Spring Upper Seat

Second Generation 2003 - 2008 (SG)

Front Camber Adjustable Pillow Ball Upper Mount Set
Part No. 658 410 A Price $320.00
* Pillow Nut : H4 / Pillow Collar : 01

Third Generation 2009 - 2013 (SH)

Front Camber Adjustable Pillow Ball Upper Mount Set
Part No. 658 410 A Price $320.00
* Pillow Nut : I / Pillow Collar : 01

PRODUCT INFORMATION
Enables camber adjustment on suspension coilovers. Correct wheel alignment
irregularities or setup the suspension to your specific race setting.
* Pillow Nut : HS (M12 x 1.25 - Counter Sink 0mm)
* Pillow Collar : 01 type (22mm OD x 15.1mm ID, T = 6mm)
* Other Pillow nut and Pilllow collar sizes availiable on request

Second Generation 2003 - 2008 (SG)

Front Pillow Ball Stabilizer End Link
Part No. 667 318 A Price $74.00
PRODUCT INFORMATION
* Ball joint
* Solid steel construction
* Non-adjustable length

12 cuscousainc.com/products/suspension-components/
13 Suspension
Third Generation 2009 - 2013 (SH)
Fourth Generation 2014 - 2018 (SJ)
Rear Pillow Ball Stabilizer End Link
Part No. 965 317 A Price $240.00

PRODUCT INFORMATION
Solid pillow ball rod end makes no deflection
* Pillow ball rod end / Ball joint
* Aluminum Billet Collar
* Adjustable length : 73 mm ~ 87 mm

Fourth Generation 2014 - 2018 (SJ)

Auto Levelizer Adjusting Rod
Part No. 00B 628 C Price $67.00
PRODUCT INFORMATION
Corrects headlight beams for lowered vehicles.
* Direct factory replacement 100% bolt-on
* Adjustable length via turnbuckle
* Short type (73 mm ~ 90 mm )
* Adjustment parameter is dependent on rod

13 cuscousainc.com/products/suspension-components/
14 Suspension
First Generation 1998 - 2002 (SF)
Front Sway Bar [ 21 mm OD Spec. ]
Part No. 660 311 A21 Price $240.00
* Turbo Model Only
First Generation 1998 - 2002 (SF)
Front Sway Bar [ 22 mm OD Spec. ]
Part No. 660 311 A22 Price $240.00
* Turbo Model Only

First Generation 1998 - 2002 (SF)

Rear Sway Bar [ 16 mm OD Spec. ]
Part No. 675 311 BJ16 Price $240.00
* 3 Level Adjustable
* 235% / 298% / 346% vs. Stock

Second Generation 2003 - 2008 (SG)

Front Sway Bar [ 23 mm OD Spec. ]
Part No. 676 311 A23 Price $267.00
* Turbo Model Only
* 136 % vs. Stock
Second Generation 2003 - 2008 (SG)
Rear Sway Bar [ 19 mm OD Spec. ]
Part No. 676 311 BJ19 Price $240.00
* 2 Level Adjustable
* 141% / 180% vs. Stock

Third Generation 2009 - 2013 (SH)

Front Sway Bar [ 23 mm OD Spec. ]
Part No. 692 311 A23 Price $280.00
* Turbo Model Only
* 197 % vs. Stock

Third Generation 2009 - 2013 (SH)

Front Sway Bar [ 23 mm OD Spec. ]
Part No. 678 311 A23 Price $267.00
* N/A Model Only
* 197 % vs. Stock
Third Generation 2009 - 2013 (SH)
Rear Sway Bar [ 20 mm OD Spec. ]
Part No. 692 311 B20 Price $280.00
* 197% vs. Stock

Fourth Generation 2014 - 2018 (SJ)

Front Sway Bar [ 26 mm OD Spec. ]
Part No. 697 311 A26 Price $347.00
* 135 % vs. Stock

Fourth Generation 2014 - 2018 (SJ)

Rear Sway Bar [ 20 mm OD Spec. ]
Part No. 692 311 B20 Price $280.00
* 197% vs. Stock

14 cuscousainc.com/products/suspension-components/
15Limited Slip Differential
1 WAY CAM

RS SPRING
Low Initial Torque, Responsive, & Long Life 2 WAY CAM
PRODUCT INFORMATION
* Minimizes drivetrain power loss, great for underpowered
vehicles
* Less chattering noise than conventional LSD systems
* Activated by RS coil springs which are designed not to
lose its pressure consistency for a stable and extended
performance use.
* A more direct feeling due to activation and pressure
direction being on the same axis for improved throttle control.

LSD Disengaged (Unlocked) LSD Engaged (Locked)

[ Type-RS : 3-Steps Activation ]

1. Cross shaft pushes against cam slot pressure ring.
2. Pressure ring pushes against clutch plates.
3. LSD engaged (locked).

CONE SPRING

1 WAY CAM

2 WAY CAM
High Initial Torque, Liner Engagement
PRODUCT INFORMATION
* The Type MZ is designed where the activation pressure
opposes
The direction of the initial torque with the utilization of cone
springs.
* Available for various driveline setups that require higher initial
Torque setting for activation.
* Suited for high horse-powered vehicles that requires maximum
traction.

LSD Disengaged (Unlocked) LSD ENGAGED (Locked)

[ Type-MZ : 4 steps activation ]

1. Cross shaft pushes against cam slot pressure ring.

2. Pressure ring pushes against clutch plates.
3. Clutch plates compress the MZ Cone spring.
4. LSD engaged (locked).

15 lsd.cuscousainc.com/
16Limited Slip Differential MZ PLATE (OUTER TAB)

FFD (FLAT FRICTION DISK INNER TAB)

PRODUCT INFORMATION
Features a special flat friction clutch plates which translates to
a milder initial engagement when acceleration is ON or OFF.
Perfect for rear wheel drive setups in circuit situations, as well
as minimizing power loss for low horse powered vehicles.
The key is the newly designed FFD (flat friction disk) combined
with outer tabbed MZ plates enables a smooth and mild MZ PLATE FFD
effectiveness when most needed. (GROOVED) (FLAT FRICTION DISK)

* Cam spec. is same as regular LSD with lower initial torque.

CUSCO’s revolutionary design maintains steady Oil flow and

ensures the highest performance.

PRODUCT INFORMATION
For professional competition where 1/100 sec matter. Specific
cam angle and timing adjustment to a precise level. The
larger the cam angle, the faster & stronger the LSD locks.
LSD can be modified to 1, 1.5, or 2 way by switching the cam
chips. The limited slip
Lock up timing is adjustable.

* 0, 15, 25, 35, 45, 55, & 65 degree

* 0 & 15 degree can not set Cam Chip (1Way ON-55˚)
for acceleration side.
* Extra cam chip set : $200.00 Cam Chip (1Way OFF-0˚)
(Set of 8 pcs, for each angle)

16 lsd.cuscousainc.com/
17Limited Slip Differential
Vehicle: Forester Engine: EJ25 N/A Transmission: MT/AT
First Generation 1998 - 2002 (SF) EJ20T Turbo

EJ20T / MT only TYPE - RS TYPE - MZ

1997 - 1998
* Not available for 98-02 Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 180 F LSD 180 A

- Default 45/0 deg - Default 45/0 deg
1 - Way - Initial Torque: - Initial Torque:
(35/0 & 45/0 deg.) 5-6 kg 10-12 kg
PPHB [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque:
4-5 kg 9-11 kg
Front Open $1,400.00 $1,400.00
LSD 180 C LSD 180 C15 LSD 180 B LSD 180 B15
- Default 45/0 deg - Default 45/15 deg - Default 45/0 deg - Default 45/15 deg
1 & 1.5 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(45/0 & 45/15 deg.) 5-6 kg 5-6 kg 10-12 kg 10-12 kg
PPJ [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
4-5 kg 4-5 kg 9-11 kg 9-11 kg

EJ20T / MT / AT TYPE - RS TYPE - MZ

1997 - 1998
Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 181 F LSD 181 F2 LSD 181 A LSD 181 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 7-8 kg 7-8 kg 12-14 kg 12-14 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 11-13 kg 11-13 kg

LSD 181 L15 LSD 181 L2 LSD 181 K15 LSD 181 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
Rear Viscus (55/20 & 55/55 deg.) 7-8 kg 7-8 kg $1,374.00 12-14 kg 12-14 kg $1,320.00
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 11-13 kg 11-13 kg

LSD 181 FG
1 Way - Default 55/0 deg LSD 181 D
(55/0 deg.) - Initial Torque: - Default 55/0 deg
PPFC 13-15 kg - Initial Torque:
High Initial Spec. Max 24 springs 12-14 kg
capacity

17 lsd.cuscousainc.com/
18Limited Slip Differential
EJ20T / EJ25 TYPE - RS TYPE - MZ
MT / AT
1998 - 2002 Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 183 F LSD 183 F2 LSD 183 A LSD 183 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 7-8 kg 7-8 kg 8-10 kg 8-10 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 L15 LSD 183 L2 LSD 183 K15 LSD 183 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
Rear Viscus (55/20 & 55/55 deg.) 7-8 kg 7-8 kg $1,400.00 8-10 kg 8-10 kg $1,347.00
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 FG
1 Way - Default 55/0 deg LSD 183 D
(55/0 deg.) - Initial Torque: - Default 55/0 deg
PPFC 13-15 kg - Initial Torque:
High Initial Spec. Max 24 springs 12-14 kg
capacity

Vehicle: Forester Engine: EJ25T Turbo Transmission: 5MT/4AT/6MT

Second Generation 2003 - 2008 (SG) EJ20T Turbo

TYPE - RS TYPE - MZ
EJ20 / EJ20T
MT only Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 180 F LSD 180 A

- Default 45/0 deg - Default 45/0 deg
1 - Way - Initial Torque: - Initial Torque:
(35/0 & 45/0 deg.) 3-5 kg 10-11 kg
PPHB [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque:
3-5 kg 9-10 kg
Front Open $1,400.00 $1,400.00
LSD 180 C LSD 180 C15 LSD 180 B LSD 180 B15
- Default 45/0 deg - Default 45/15 deg - Default 45/0 deg - Default 45/15 deg
1 & 1.5 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(45/0 & 45/15 deg.) 3-5 kg 3-5 kg 10-11 kg 10-11 kg
PPJ [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
3-5 kg 3-5 kg 9-10 kg 9-10 kg

18 lsd.cuscousainc.com/
19Limited Slip Differential
EJ20 / EJ20T TYPE - RS TYPE - MZ
MT / AT
Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 183 F LSD 183 F2 LSD 183 A LSD 183 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 7-8 kg 7-8 kg 8-10 kg 8-10 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 L15 LSD 183 L2 LSD 183 K15 LSD 183 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
Rear Viscus (55/20 & 55/55 deg.) 7-8 kg 7-8 kg $1,400.00 8-10 kg 8-10 kg $1,347.00
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 FG
1 Way - Default 55/0 deg LSD 183 D
(55/0 deg.) - Initial Torque: - Default 55/0 deg
PPFC 13-15 kg - Initial Torque:
High Initial Spec. Max 24 springs 12-14 kg
capacity

TYPE - RS TYPE - MZ
EJ25T
6 MT only Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 184 F LSD 184 A

- Default 45/0 deg - Default 45/0 deg
1 - Way - Initial Torque: - Initial Torque:
(35/0 & 45/0 deg.) 3-5 kg 10-11 kg
PPHB [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque:
3-5 kg 9-10 kg
Front Open $1,400.00 $1,400.00
LSD 184 C LSD 184 C15 LSD 184 B LSD 184 B15
- Default 45/0 deg - Default 45/15 deg - Default 45/0 deg - Default 45/15 deg
1 & 1.5 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(45/0 & 45/15 deg.) 3-5 kg 3-5 kg 10-11 kg 10-11 kg
PPJ [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
3-5 kg 3-5 kg 9-10 kg 9-10 kg

LSD 182 F LSD 182 F2 LSD 182 A LSD 182 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 8-10 kg 8-10 kg 12-14 kg 12-14 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
7-9 kg 7-9 kg 11-13 kg 11-13 kg
Rear Sure $1,400.00 $1,347.00
trac
LSD 182 L15 LSD 182 L2 LSD 182 K15 LSD 182 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/20 & 55/55 deg.) 8-10 kg 8-10 kg 12-14 kg 12-14 kg
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
7-9 kg 7-9 kg 11-13 kg 11-13 kg

19 lsd.cuscousainc.com/
20Limited Slip Differential
EJ25T
6 MT only

OEM Pressure Pro Adjust

Differential Ring
TYPE - RS Price TYPE - MZ Price

LSD 184 R LSD 184 S

Front Helical - Available ( 0, 15, 25, 35, 45, 55, 65 deg.) - Available ( 0, 15, 25, 35, 45, 55, 65 deg.)
Various Settings - Initial Torque: 4-5 kg - Initial Torque: 9-11 kg
are available $1,880.00 $1,880.00
Request on order LSD 182 R LSD 182 S
Rear Torsen - Available ( 0, 15, 25, 35, 45, 55, 65 deg.) - Available ( 0, 15, 25, 35, 45, 55, 65 deg.)
- Initial Torque: 7-8 kg - Initial Torque: 12-14 kg

Vehicle: Forester Engine: EJ25T Turbo Transmission: 5MT/4AT/5AT

Third Generation 2009 - 2013 (SH) EJ20T Turbo

TYPE - RS TYPE - MZ
EJ20T / MT
* Not available for EJ25T Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 180 F LSD 180 A

- Default 45/0 deg - Default 45/0 deg
1 - Way - Initial Torque: - Initial Torque:
(35/0 & 45/0 deg.) 3-5 kg 10-11 kg
PPHB [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque:
3-5 kg 9-10 kg
Front Open $1,400.00 $1,400.00
LSD 180 C LSD 180 C15 LSD 180 B LSD 180 B15
- Default 45/0 deg - Default 45/15 deg - Default 45/0 deg - Default 45/15 deg
1 & 1.5 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(45/0 & 45/15 deg.) 3-5 kg 3-5 kg 10-11 kg 10-11 kg
PPJ [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
3-5 kg 3-5 kg 9-10 kg 9-10 kg

TYPE - RS TYPE - MZ
EJ20T / EJ25T
5MT / 4AT Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 183 F LSD 183 F2 LSD 183 A LSD 183 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 7-8 kg 7-8 kg 8-10 kg 8-10 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 L15 LSD 183 L2 LSD 183 K15 LSD 183 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
Rear Open (55/20 & 55/55 deg.) 7-8 kg 7-8 kg $1,400.00 8-10 kg 8-10 kg $1,347.00
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 FG
1 Way - Default 55/0 deg LSD 183 D
(55/0 deg.) - Initial Torque: - Default 55/0 deg
PPFC 13-15 kg - Initial Torque:
High Initial Spec. Max 24 springs 12-14 kg
capacity

20 lsd.cuscousainc.com/
21Limited Slip Differential TYPE - RS TYPE - MZ
EJ25T / 5AT
Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 684 F LSD 684 F2 LSD 684 A LSD 684 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 7-8 kg 7-8 kg 7-8 kg 7-8 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg
Rear Open $1,547.00 $1,520.00
LSD 684 L15 LSD 684 L2 LSD 684 K15 LSD 684 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/20 & 55/55 deg.) 7-8 kg 7-8 kg 7-8 kg 7-8 kg
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

Vehicle: Forester Engine: FB20 NA Transmission: 6MT/CVT

Fourth Generation 2014 - 2018 (SJ) FA20T Turbo
TYPE - RS TYPE - MZ
6MT only
* Not available for CVT Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 180 F LSD 180 A

- Default 45/0 deg - Default 45/0 deg
1 - Way - Initial Torque: - Initial Torque:
(35/0 & 45/0 deg.) 3-5 kg 10-11 kg
PPHB [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque:
3-5 kg 9-10 kg
Front Open $1,400.00 $1,400.00
LSD 180 C LSD 180 C15 LSD 180 B LSD 180 B15
- Default 45/0 deg - Default 45/15 deg - Default 45/0 deg - Default 45/15 deg
1 & 1.5 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(45/0 & 45/15 deg.) 3-5 kg 3-5 kg 10-11 kg 10-11 kg
PPJ [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
3-5 kg 3-5 kg 9-10 kg 9-10 kg

TYPE - RS TYPE - MZ
6MT / CVT
Initial Set - Up Initial Set - Up
Price Price
(US $) (US $)
OEM Pressure
1 - Way 1.5 - Way 2 - Way 1 - Way 1.5 - Way 2 - Way
Differential Ring

LSD 183 F LSD 183 F2 LSD 183 A LSD 183 A2

- Default 55/0 deg - Default 55/55 deg - Default 55/0 deg - Default 55/55 deg
1 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
(55/0 & 55/55 deg.) 7-8 kg 7-8 kg 8-10 kg 8-10 kg
PPEF [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 L15 LSD 183 L2 LSD 183 K15 LSD 183 K2
- Default 55/20 deg - Default 55/55 deg - Default 55/20 deg - Default 55/55 deg
1.5 & 2 Way - Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
Rear Open (55/20 & 55/55 deg.) 7-8 kg 7-8 kg $1,400.00 8-10 kg 8-10 kg $1,347.00
PPK [Spec-F] [Spec-F] [Spec-F] [Spec-F]
- Initial Torque: - Initial Torque: - Initial Torque: - Initial Torque:
6-7 kg 6-7 kg 7-9 kg 7-9 kg

LSD 183 FG
1 Way - Default 55/0 deg LSD 183 D
(55/0 deg.) - Initial Torque: - Default 55/0 deg
PPFC 13-15 kg - Initial Torque:
High Initial Spec. Max 24 springs 12-14 kg
capacity

21 lsd.cuscousainc.com/
22 Clutch System
Second Generation 2004 - 2007 (SG - EJ25T)
Twin Metal Clutch System [Size 240 / Spline 25.2 / Teeth 24]
Part No. 667 022 TP Price $2,576.00

PRODUCT INFORMATION
* 9800 N/f (1000 Kg/f)
Used in professional competition, this twin metal unit features great controllability
especially during half clutch engagement. Highly heat resistant with low wear rate.
A carbon infused clutch disc is matched with ventilated type of center plate for
stable performance at any given heat range.

First Generation 1997 - 2002 (SF - EJ20T)

Single Clutch System : Pull Type [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 022 HP Price $1,799.00

Second Generation 2002 - 2004 (SG - EJ20T)

Single Clutch System : Pull Type [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 022 HP Price $1,799.00

Second Generation 2004 - 2007 (SG - EJ25T)

Single Clutch System : Pull Type [Size 240 / Spline 25.2 / Teeth 24]
Part No. 667 022 HP Price $1,799.00

PRODUCT INFORMATION
* 11800 N/f (1200 Kg/f)
Heavy clutch pedal greatly hinders shifting performance. This is why our clutch
systems feature a specially designed diaphragm lever for the perfect ratio of pressure
and feel. Each component is designed to work in complete harmony with each other,
balanced to the highest degree of specification in terms of material and sizing.

22 cuscousainc.com/products/drivetrain/
23 Clutch System
First Generation 1997 - 2002 (SF - EJ20T)
Copper Single Set [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 022 FN Price $798.00
* Copper Disk + Clutch Cover Set

Second Generation 2002 - 2004 (SG - EJ20T)

Copper Single Set [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 022 FN Price $798.00
* Copper Disk + Clutch Cover Set

Second Generation 2005 - 2007 (SG - EJ20T)

Copper Single Set [Size 230 / Spline 25.2 / Teeth 24]
Part No. 666 022 F Price $771.00
* Copper Disk + Clutch Cover Set

Second Generation 2004 - 2007 (SG - EJ25T)

Copper Single Set [Size 240 / Spline 25.2 / Teeth 24]
Part No. 667 022 F Price $798.00
* Copper Disk + Clutch Cover Set

First Generation 1998 - 2002 (SF - EJ20T)

Copper Single Disk [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 R660N Price $386.00
* Copper Single Disk

Second Generation 2002 - 2004 (SG - EJ20T)

Copper Single Disk [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 R660N Price $386.00
* Copper Single Disk

Second Generation 2005 - 2007 (SG - EJ20T)

Copper Single Disk [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 R666 Price $386.00
* Copper Single Disk

Second Generation 2004 - 2007 (SG - EJ25T)

Copper Single Disk [Size 240 / Spline 25.2 / Teeth 24]
Part No. 00C 022 R667 Price $386.00
* Copper Single Disk

PRODUCT INFORMATION
* OEM Flywheel Compliant
* Must use with Cusco Clutch Cover
Sport performance with factory reliability

23 cuscousainc.com/products/drivetrain/
24 Clutch System
First Generation 1998 - 2002 (SF - EJ20T)
Metal Clutch Set [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 022 G Price $835.00
* Metal Disk + Clutch Cover Set

Second Generation 2002 - 2004 (SG - EJ20T)

Metal Clutch Set [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 022 G Price $835.00
* Metal Disk + Clutch Cover Set

Second Generation 2005 - 2007 (SG - EJ20T)

Metal Clutch Set [Size 230 / Spline 25.2 / Teeth 24]
Part No. 666 022 G Price $835.00
* Metal Disk + Clutch Cover Set

Second Generation 2004 - 2007 (SG - EJ25T)

Metal Clutch Set [Size 240 / Spline 25.2 / Teeth 24]
Part No. 667 022 G Price $798.00
* Metal Disk + Clutch Cover Set

First Generation 1998 - 2002 (SF - EJ20T)

Metal Disk [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 C201SF Price $428.00
* Metal Disk

Second Generation 2002 - 2004 (SG - EJ20T)

Metal Disk [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 C201SF Price $428.00
* Metal Disk

Second Generation 2005 - 2007 (SG - EJ20T)

Metal Disk [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 C666F Price $428.00
* Metal Disk

Second Generation 2004 - 2007 (SG - EJ25T)

Metal Disk [Size 240 / Spline 25.2 / Teeth 24]
Part No. 00C 022 C667F Price $415.00
* Metal Disk

PRODUCT INFORMATION
* OEM Flywheel Compliant
* Must use with Cusco Clutch Cover

24 cuscousainc.com/products/drivetrain/
25 Clutch System
First Generation 1998 - 2002 (SF - EJ20T)
Clutch Cover [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 B660 Price $500.00

Second Generation 2002 - 2004 (SG - EJ20T)

Clutch Cover [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 B660 Price $500.00

Second Generation 2005 - 2007 (SG - EJ20T)

Clutch Cover [Size 230 / Spline 25.2 / Teeth 24]
Part No. 00C 022 B666 Price $500.00

Second Generation 2004 - 2007 (SG - EJ25T)

Clutch Cover [Size 240 / Spline 25.2 / Teeth 24]
Part No. 00C 022 B667 Price $500.00

PRODUCT INFORMATION
* 11300 N/f (1150 Kg/f)
* Must use with Cusco clutch disk

First Generation 1998 - 2002 (SF - EJ20T)

Chromoly Flywheel [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 023 A Price $654.00

Second Generation 2002 - 2004 (SG - EJ20T)

Chromoly Flywheel [Size 230 / Spline 25.2 / Teeth 24]
Part No. 660 023 A Price $654.00

Second Generation 2004 - 2007 (SG - EJ25T)

Chromoly Flywheel [Size 240 / Spline 25.2 / Teeth 24]
Part No. 667 023 A Price $734.00

PRODUCT INFORMATION
* Weight : 4.86 kg vs 8.7 kg OEM
* Moment of inertia : 44% vs Stock

25 cuscousainc.com/products/drivetrain/
26 Clutch System
Second Generation 2003 - 2008 (SG - Turbo Model)
Stainless Mesh Clutch Line [Turbo Model]
Part No. 660 022 CL Price $120.00
[Subaru OE part# 37251-AA003]
* Tubo Model
* 5 Speed MT

Second Generation 2003 - 2008 (SG - N/A Model)

Stainless Mesh Clutch Line [N/A Model]
Part No. 691 022 CL Price $120.00
[Subaru OE part# 37251-AA001]
* Tubo Model
* 5 Speed MT

Third Generation 2009 - 2013 (SH)

Stainless Mesh Clutch Line [5MT]
Part No. 691 022 CL Price $120.00
[Subaru OE part# 37251-AA001]
* Tubo Model
* 5 Speed MT

Fourth Generation 2014 - 2018 (SJ)

Stainless Mesh Clutch Line [6MT]
Part No. 691 022 CL Price $120.00
[Subaru OE part# 37251-AA001]
* Tubo Model
* 5 Speed MT

PRODUCT INFORMATION
* For 6-Speed MT model only.
Using aircraft-grade PTFE stainless, Teflon-inner lined hose, we’ve achieved
a design that not only provide performance but also longevity. Compared to
standard OEM rubber hose, stainless reinforce- ment resists expansion over high
range of temperatures, as well as to keep contamination at minimum. Due to this
characteristics, fluid-dynamic forces are translated with much higher precision,
from pedal to clutch mechanism. Recommended for anyone who is serious about
vehicle control, in any motorsport stage.

26 cuscousainc.com/products/drivetrain/
27 Strut Tower Brace
Front Strut Bar
Strut Tower Bars eliminate chassis flex at the most vital area of the
car - between the strut towers, essentially to prevent the misalignment
of suspension mounting points experienced during high cornering
loads. The end result is the suspension performing at its intended
optimal condition with the suspension geometry in tact.

OS Type

ST Type

OS Type 1 OS Type 2 AS Type

OS Type

27 cuscousainc.com/products/chassis-and-body-brace/
28 Strut Tower Brace
Front Strut Tower Brace Rear Strut Tower Brace
First Generation 1998 - 2002 (SF) First Generation 1998 - 2002 (SF)
Front: OS Type 2 Rear: OS Type 1
Part No. 660 540 AN Price $200.00 Part No. 658 541 A Price $200.00

First Generation 1998 - 2002 (SF) First Generation 1998 - 2002 (SF)
Front: ST Type Rear: AS Type
Part No. 660 510 A Price $160.00 Part No. 658 511 A Price $160.00
* Adjustable length & tension * Adjustable length & tension

Second Generation 2003 - 2008 (SG) Second Generation 2003 - 2008 (SG)
Front: OS Type 1 Rear: OS Type 1
Part No. 667 540 ALHD Price $200.00 Part No. 658 541 A Price $200.00

Third Generation 2009 - 2013 (SH) Third Generation 2009 - 2013 (SH)
Front: OS Type 1 Rear: OS Type 1
Part No. 692 540 A Price $200.00 Part No. 692 541 A Price $200.00

Fourth Generation 2014 - 2018 (SJ) Fourth Generation 2014 - 2018 (SJ)
Front: OS Type 2 Rear: OS Type 1
Part No. 697 540 A Price $200.00 Part No. 692 541 A Price $200.00

Quick Release Lever

Part No. 00B 540 A Price $54.00

PRODUCT INFORMATION
* 2 pcs per set
Enables quick removal of the strut bar center shaft without any hand tools.
Replace strut bar nut & bolt set for Type-OS, ALC, & HBD.

28 cuscousainc.com/products/chassis-and-body-brace/
29 Power Brace

Part No: 692 475 A

Ver. 2 : 4 point brace

Pictured
Part No: 677 477 A

Ver. 1 : 2 point brace

Connecting points

29 suspension.cuscousainc.com
30 Power Brace
Front Strut Tower Brace
First Generation 1998 - 2002 (SF) First Generation 1998 - 2002 (SF)
Front Lower Arm Bar [ Version 1 ] Front Lower Arm Bar [ Version 2 ]
Part No. 660 475 A Price $100.00 Part No. 675 477 A Price $200.00
* Turbo model only * Turbo model only
* Not work with Ver.2 * Not work with Ver.1

Second Generation 2003 - 2008 (SG) Second Generation 2003 - 2008 (SG)
Front Lower Arm Bar [ Version 1 ] Front Lower Arm Bar [ Version 2 ]
Part No. 676 475 A Price $100.00 Part No. 676 477 A Price $200.00
* Turbo model only * Turbo model only
* Not work with Ver.2 * Not work with Ver.1

Third Generation 2009 - 2013 (SH) Third Generation 2009 - 2013 (SH)
Front Lower Arm Bar [ Version 1 ] Front Lower Arm Bar [ Version 2 ]
Part No. 692 475 A Price $100.00 Part No. 677 477 A Price $200.00
* Turbo model only * Turbo model only
* Not work with Ver.2 * Not work with Ver.1

Rear Strut Tower Brace

First Generation 1998 - 2002 (SF)
Rear Lower Arm Bar [ Version 1 ]
Part No. 660 476 A Price $64.00
* Turbo model only
* Not work with Ver.2

Second Generation 2003 - 2008 (SG)

Rear Lower Arm Bar [ Version 1 ]
Part No. 660 476 A Price $64.00
* Turbo model only
* Not work with Ver.2

30 suspension.cuscousainc.com
31 Power Brace
Vehicle: Forester
Second Generation 2003 - 2008 (SG)

31 suspension.cuscousainc.com
32 Power Brace
Vehicle: Forester
Second Generation 2003 - 2008 (SG)

Second Generation 2003 - 2008 (SG)

Front Member Brace
Part No. 676 492 FM Price $227.00
* SG5 Before M/C

Second Generation 2003 - 2008 (SG)

Engine Member Brace
Part No. 676 492 ER Price $200.00
* SG5 Turbo Only

Second Generation 2003 - 2008 (SG)

Floor Center Brace
Part No. 676 492 C Price $507.00
* SG5 AT Only

Second Generation 2003 - 2008 (SG)

Floor Rear Brace
Part No. 672 492 R Price $167.00

Second Generation 2003 - 2008 (SG)

Rear Trunk Brace
Part No. 676 492 RT Price $104.00
* SG5

32 suspension.cuscousainc.com
33 Power Brace
Vehicle: Forester
First Generation 1998 - 2002 (SF)
Second Generation 2003 - 2008 (SG)

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Rear Subframe Brace
Part No. 676 487 A Price $160.00

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
OE Rear Diffuser bracket
Part No. 676 487 S Price $51.00
* Require drilling a 6mm hole to install

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
OE Rear Diffuser
Part No. ST91225 FE000 Price $72.00
* Subaru OE parts

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Rear Diffuser Mounting Bolts
Part No. ST90100 0365 Price $1.80/pc.
* Subaru OE parts : need 4 pcs

33 suspension.cuscousainc.com
34 Power Brace
Vehicle: Forester
Third Generation 2009 - 2013 (SH)

34 suspension.cuscousainc.com
35 Power Brace
Third Generation 2009 - 2013 (SH)
Front Member Brace
Third Generation 2009 - 2013 (SH)
Part No. 677 492 FM Price $280.00 Cross Member Brace
* Connect both front member and radiator support Part No. 676 492 ER Price $200.00
* Steel
* Retains factory bumper beam * Connect front member and LCA mounting point
* Steel

Third Generation 2009 - 2013 (SH)

Floor Center Brace
Third Generation 2009 - 2013 (SH)
Part No. 692 492 C Price $507.00
Floor Rear Brace
* Not for SH9
Part No. 692 492 R Price $167.00
* Connect Front member, Transmission member
and main frame * SH5
* Need modify on under cover * Connect center frame and rear member
* Steel
* Need modify on uner cover

Third Generation 2009 - 2013 (SH)

Rear Member Side Brace
Third Generation 2009 - 2013 (SH)
Part No. 687 492 RS Price $174.00 Rear Member Brace
* Connect front & rear Lateral rod mounting points Part No. 692 492 RM Price $114.00
* Steel
* SH5
* Connect both rear subframe
* Steel

Third Generation 2009 - 2013 (SH)

Rear End Brace
Part No. 677 492 RE Price $227.00 Third Generation 2009 - 2013 (SH)
Power Steering Rack Brace
* SH5
* Connect right and left rear sub frame Part No. 692 026 A Price $67.00
* Steel
* Need remove OEM bumper beam * Connect steering rack and cross member
* Left Hand Drive model
* Replacing the factory brace

35 suspension.cuscousainc.com
36 Power Brace
Vehicle: Forester
Fourth Generation 2014 - 2018 (SJ)

Fourth Generation 2014 - 2018 (SJ)

Front Side Brace
Part No. 697 492 FS Price $227.00
* Connect front and rear LCA mounting point

Fourth Generation 2014 - 2018 (SJ)

Rear Member Side Brace
Part No. 687 492 RS Price $174.00
* Connect front & rear Lateral rod mounting points
* Steel

Fourth Generation 2014 - 2018 (SJ)

Rear End Brace
Part No. 677 492 RE Price $227.00
* Connect right and left rear sub frame
* Steel
* Need remove OEM bumper beam

36 suspension.cuscousainc.com
37 Drive Train Parts
Fourth Generation 2014 - 2018 (SJ)
Reinforced Differential Carrier
Part No. 6A1 489 A Price $174.00

PRODUCT INFORMATION
* Pre-installed heavy-duty rubber bushings
* Direct OE Replacement type
* Boxed steel construction
Eliminate unwanted rear differential carrier movement for maximize direct traction

37 cuscousainc.com/products/drivetrain/
38 Engine Parts
Engine Pitching Stopper
Part No. 6A1 911 PS Price $134.00

PRODUCT INFORMATION
* HD Rubber Bushing on body side
* Aluminum Billet Blue
* For EJ20 / EJ25
Reduce torque-induced rocking and
pitching as engine power is applied and
subsequently, lifted.

High Pressure Radiator Cap

Part No. 00B 050 A13 Price $34.00

PRODUCT INFORMATION
Cusco Radiator caps protects against
overheating and promotes efficient coolant
flow. Rated at (1.3kg/cm2).

Magnetic Oil Filter

Part No. 00B 001 C Price $34.00

PRODUCT INFORMATION
Features a high powered magnet and ultra
fine paper + mesh filter, effective for virtually
any condition.

38 cuscousainc.com/products/engine-parts/
39 Engine Parts
First Generation 1998 - 2002 (SF)
Second Generation 2003 - 2008 (SG)
Third Generation 2009 - 2013 (SH)
Neodymium Magnetic Oil Drain Plug
Part No. 00B 001 ND03 Price $24.00

Fourth Generation 2014 - 2018 (SJ)

Neodymium Magnetic Oil Drain Plug
Part No. 00B 001 ND04 Price $24.00
PRODUCT INFORMATION
* 4500 Gauss Neodymium Magnet
* A7075 Duralumin alloy body
* M20 x P 1.5
* Aluminum gasket included
Capture metallic pollutants and microscopic particles that reside in motor oils, even
those which may not be captured by oil filters.

Battery Tie-Down
Part No. 00B 745 B Price $78.00

PRODUCT INFORMATION
Add some Cusco blue to your engine bay
by installing one of these battery tie downs!
Three sizes are available for various vehicle
applications.

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Third Generation 2009 - 2013 (SH)
Earth Grounding Kit for Chassis SF/SG/SH: 1998 - 2013
Part No. 00B 727 F Price $200.00

Fourth Generation 2014 - 2018 (SJ)

Earth Grounding Kit for Chassis SJ: 2014 - 2018
Part No. 965 727 A Price $200.00
PRODUCT INFORMATION
* Full cranking amps
* Brighter headlights
* Increased engine response
Full electrical power distribution throughout
system. Maximizes electric efficiency,
increases response.

39 cuscousainc.com/products/engine-parts/
40 Engine Parts
Second Generation 2003 - 2008 (SG)
Radiator Cooling Plate
Part No. 676 003 AL Price $131.00

PRODUCT INFORMATION
* Aluminum with Blue Alumite finish

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Air Intake Silicon Hose
Part No. 667 037 A Price $54.00

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Third Generation 2009 - 2013 (SH)
Turbo Heat Shild
Part No. 667 045 A Price $91.00

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Turbo Heat Shild & Air Intake Silicon Hose Set
Part No. 667 045 B Price $131.00

First Generation 1998 - 2002 (SF)

Second Generation 2003 - 2008 (SG)
Exhaust Muffler Hanger
Part No. A160 RM002B Price $12.00/pc

Third Generation 2009 - 2013 (SH)

Exhaust Muffler Hanger
Part No. A160 RM004B Price $12.00/pc
PRODUCT INFORMATION
* 5 pcs per vehicle
Maximum durability to support factory and OEM exhaust systems for vehicles in
motorsports or spirited driving.

40 cuscousainc.com/products/engine-parts/
41 Sports Equipment
Tow Strap : Vertical mount [Red]
Part No. 00B CTV RD Price $60.00

Tow Strap : Vertical mount [Blue]

Part No. 00B CTV BL Price $60.00

PRODUCT INFORMATION
* Due to universal type products,
it may need modification on vehicle to install.
Towing Capacity : 3,500 kg
Length : 310 mm -
Width : 50 mm (except bracket)
Bracket : mounting hole ID : 16 mm, T= 3 mm

Tow Strap : Horizontal mount [Blue]

Part No. 00B CTS RD Price $47.00

Tow Strap : Horizontal mount [Red]

Part No. 00B CTS BL Price $47.00

PRODUCT INFORMATION
* Due to universal type products,
it may need modification on vehicle to install.
Towing Capacity : 3,500 kg
Length : 310 mm -
Width : 50 mm (except bracket)
Bracket : mounting hole ID : 16 mm, T= 3 mm

Fourth Generation 2014 - 2018 (SJ)

Front Folding Tow Hook
Part No. 965 017 F Price $131.00

41 cuscousainc.com/products/cusco-gear/
42 Sports Equipment
Drift Knob [Silver]
Part No. 692 014 AA Price $27.00

Drift Knob [Blue]

Part No. 692 014 AL Price $27.00

Drift Knob [Red]

Part No. 692 014 AR Price $27.00

PRODUCT INFORMATION
This universal handbrake knob is made from aluminum and finished in silver, red,
and blue. It replaces the factory handbrake knob and allows for free action of the
handbrake.

Fourth Generation 2014 - 2018 (SJ)

Engine Start Ring Cover
Part No. 965 730 G Price $24.00

* Billet Aluminum with Blue Aluminum finish

Third Generation 2009 - 2013 (SH)

Fourth Generation 2014 - 2018 (SJ)
Sports Accel Pedal
Part No. 965 766 A Price $51.00

PRODUCT INFORMATION
Wider pedals enable heel & toe
* Bolt-on

42 cuscousainc.com/products/cusco-gear/
43 Sports Equipment

43 cuscousainc.com/products/cusco-gear/
44 Sports Equipment
[6 Point for HANS Devices] - Blue : 2 inch shoulder belts
Part No. 00B CRH 6HBL Price $420.00

[6 Point for HANS Devices] - Red : 2 inch shoulder belts

Part No. 00B CRH 6HRD Price $420.00

[6 Point for HANS Devices] - Black : 2 inch shoulder belts

Part No. 00B CRH 6HBK Price $420.00

[6 Point for HANS Devices] - Blue

Part No. 00B CRH 6BL Price $420.00

[6 Point for HANS Devices] - Red

Part No. 00B CRH 6RD Price $420.00

[6 Point for HANS Devices] - Black

Part No. 00B CRH 6BK Price $420.00

44 cuscousainc.com/products/cusco-gear/
45 Sports Equipment
[4 Point - 3 inch Width] - Blue
Part No. 00B CRH 4BL Price $360.00

[4 Point - 3 inch Width] - Red

Part No. 00B CRH 4RD Price $360.00

[4 Point - 3 inch Width] - Black

Part No. 00B CRH 4BK Price $360.00

45 cuscousainc.com/products/cusco-gear/
46 Cusco x Bride Seats
FULL BUCKET SEAT

ZETA IV [FRP - Silver]

Part No. BRD-HA1ACF Price $1,080.00

ZETA IV [Super Aramid - Black Carbon]

Part No. BRD-HA1ACZ Price $1,660.00

FIA Approved
* Black with Cusco Logo
* FRP Silver - Weight : 7.4 kg / 16 lbs
* Super Aramid - Weight : 7.4 kg / 16 lbs

ZIEG IV [FRP Silver]

Part No. BRD-HB1ACF Price $1,280.00

ZIEG IV [Super Aramid - Black Carbon]

Part No. BRD-HB1ACZ Price $1,850.00

* FIA Approved
* Black Fabric with Cusco Logo
* FRP Silver - Weight : 7.6 kg / 17 lbs
* Super Aramid - Weight : 7.6 kg / 17 lbs

ZIEG IV WIDE [FRP Silver]

Part No. BRD-HC1ACF Price $1,380.00

ZIEG IV WIDE [Super Aramid - Black Carbon]

Part No. BRD-HC1ACZ Price $1,950.00

* FIA Approved
* Black Fabric with Cusco Logo
* FRP Silver - Weight : 8.0 kg / 17.4 lbs
* Super Aramid - Weight : 8.0 kg / 17.4 lbs

A.i.R. [ Black Fabric / FRP Silver ]

Part No. BRD-F86HCF Price $1,250.00

* Stylish Full Bucket Seat

* Boxed hip section provide additional structural integrity
* Anatomically ergonomic seating
* Low aerodynamic drag at headrest area
* Designed for sporting hold as well as long duration
comfort * Weight : 6.8 kg / 15 lbs

46 cuscousainc.com/products/bride-racing-seats/
47 Cusco x Bride Seats
Compatible with ZETA IV / ZEIG IV / ZEIG IV / A.i.R.

FO type Seat Rail

FO type Seat Rail RIGHT LEFT

First Generation 1998 - 2002 (SF) BRDS-F035FO BRDS-F036FO

Third Generation 2009 - 2013 (SH) BRDS-F039FO BRDS-F040FO

Price $270.00
* Slide type seat rail

Compatible with ZETA IV / ZEIG IV / ZEIG IV / A.i.R.

FB type Seat Rail

FB type Seat Rail RIGHT LEFT

Second Generation 2003 - 2008 (SG) BRDS-F037FB BRDS-F038FB

Fourth Generation 2014 - 2018 (SJ) BRDS-F041FB BRDS-F042FB

Price $380.00
* Slide type seat rail

Compatible with ZETA IV / ZEIG IV / ZEIG IV / A.i.R.

FX type Seat Rail

FX type Seat Rail RIGHT LEFT

First Generation 1998 - 2002 (SF) BRDS-F035FX BRDS-F036FX

Second Generation 2003 - 2008 (SG) BRDS-F037FX BRDS-F038FX

Third Generation 2009 - 2013 (SH) BRDS-F039FX BRDS-F040FX

Fourth Generation 2014 - 2018 (SJ) BRDS-F041FX BRDS-F042FX

* Slide type seat rail Price $310.00

Compatible with ZEIG IV WIDE

XL type Seat Rail XL type Seat Rail RIGHT LEFT

First Generation 1998 - 2002 (SF) BRDS-F035XL BRDS-F036XL

Second Generation 2003 - 2008 (SG) BRDS-F037XL BRDS-F038XL

Third Generation 2009 - 2013 (SH) BRDS-F039XL BRDS-F040XL

Fourth Generation 2014 - 2018 (SJ) BRDS-F041XL BRDS-F042XL

* Slide type seat rail Price $325.00

47 cuscousainc.com/products/bride-racing-seats/
48 Cusco x Bride Seats
RECLINING SEAT

STRADIA III Black [FRP Silver Shell]

Standard Cusion Lowered Cushion
Part No. BRD-G71AMF Part No. BRD-G72AMF
Price $2,220.00 Price $2,220.00

STRADIA III Black [Super Aramid Black Shell]

Standard Cusion Lowered Cushion
Part No. BRD-G71AZR Part No. BRD-G72AZR
* Luxury Suede / Fire Retardant Price $2,720.00 Price $2,720.00
* Steel Frame Structure
* Weight: 14kg / 31lbs

STRADIA III Gradation Logo [FRP Silver Shell]

Standard Cusion Lowered Cushion
Part No. BRD-G71AMF Part No. BRD-G72AMF
Price $2,270.00 Price $2,270.00

STRADIA III Gradation Logo [Super Aramid Black Shell]

Standard Cusion Lowered Cushion
Part No. BRD-G71AZR Part No. BRD-G72AZR
Price $2,770.00 Price $2,770.00
* Luxury Suede / Fire Retardant
* Steel Frame Structure
* Weight: 14kg / 31lbs

EUROSTER II
Part No. BRD-E32ACN Price $1,100.00

EUROSTER II CRUZ
Part No. BRD-E54ACN Price $1,150.00
* Weight: 16.1kg / 35.5lbs.
* Luxury Suede Fabric
* Fireproof Material
* Safety Standard Compliant (Japan)
* Black base with Grey Mesh center

Optional Arm Rest - Suede

Part No. BRDA-P51AAN (Right) Price $88.00
Part No. BRDA-P52AAN (Left) Price $88.00

48 cuscousainc.com/products/bride-racing-seats/
49 Cusco x Bride Seats
RO type Seat Rail Compatible with STREAMS / STREAMS CRUZ

RO type Seat Rail RIGHT LEFT

First Generation 1998 - 2002 (SF) BRDS-F035RO BRDS-F036RO

Third Generation 2009 - 2013 (SH) BRDS-F039RO BRDS-F040RO

Price $240.00
* Slide type seat rail

MO type Seat Rail Compatible with STREAMS / STREAMS CRUZ

MO type Seat Rail RIGHT LEFT

First Generation 1998 - 2002 (SF) BRDS-F035MO BRDS-F036MO

Third Generation 2009 - 2013 (SH) BRDS-F039MO BRDS-F040MO

Price $270.00
* Slide type seat rail

RB type Seat Rail Compatible with STREAMS / STREAMS CRUZ

RB type Seat Rail RIGHT LEFT

Second Generation 2003 - 2008 (SG) BRDS-F037RB BRDS-F038RB

Fourth Generation 2014 - 2018 (SJ) BRDS-F041RB BRDS-F042RB

Price $350.00
* Slide type seat rail

MB type Seat Rail Compatible with STREAMS / STREAMS CRUZ

MB type Seat Rail RIGHT LEFT

Second Generation 2003 - 2008 (SG) BRDS-F037MB BRDS-F038MB

Fourth Generation 2014 - 2018 (SJ) BRDS-F041MB BRDS-F042MB

Price $380.00
* Slide type seat rail

49 cuscousainc.com/products/bride-racing-seats/
50 Fujitsubo
First Generation 1998 - 2002 (SF5 2.0 Turbo - EJ20T)
Legalis - R [ Cat-Back ]
Part No. FGK 790-64501 Price $920.00

* 101.6mm Slashed Polished Tip

* Weight: 37.5 lbs. (OEM 34.4 lbs.)
* Sound Level: 86dB @ 4687rpm (OEM 84dB)

First Generation 1998 - 2002 (SF5 2.0 Turbo - EJ20T)

Legalis - R [ Cat-Back ]
Part No. FGK 390-64501 Price $920.00

* 117mm Round Slashed Polished Tip

* Weight: 26.2 lbs. (OEM 33.7 lbs.)
* Sound Level: 95dB @ 4687rpm (OEM 84dB)

First Generation 1998 - 2002 (SF5 2.0 Turbo - EJ20T)

Legalis - R [ Cat-Back ]
Part No. FGK 760-64502 Price $890.00

* 90mm Slashed Polished Tip

* Weight: 28.2 lbs. (OEM 30.4 lbs.)
* Sound Level: 91dB @ 4200rpm (OEM 88dB)

50 cuscousainc.com/products/fujitsubo-products/
51 Fujitsubo
Second Generation 2003 - 2008
(SG5 2.0 Turbo EJ20T / SG9 2.5 STI EJ25)
Legalis R Type Evolution [ Axel-Back ]
Part No. FGK 790-64511 Price $690.00
* 117mm Round Slashed Polished Tip
* Weight: 28.2 lbs. (OEM 30.4 lbs.)
* Sound Level: 91dB @ 4200rpm (OEM 88dB)

Second Generation 2003 - 2008

(SG5 2.0 Turbo EJ20T / SG9 2.5 STI EJ25)
Legalis Super - R [ Axel-Back ]
Part No. FGK 390-64511 Price $730.00
* 117mm Round Slashed Polished Tip
* Weight: 15.2 lbs. (OEM 19.2 lbs.)
* Sound Level: 93dB @ 4125rpm (OEM 80dB)

Second Generation 2003 - 2008 (SG9 2.5 STI EJ25)

Super EX Basic Version [ Exhaust Manifold / Header ]
Part No. FGK 610-64511 Price $1,450.00
* 42.7 - 50.8 mm Pipe Diameter
* Weight: 16.1 lbs. (OEM 31.7 lbs.)
* Sound Level: 77dB @ 4200rpm (OEM 80dB)

51 cuscousainc.com/products/fujitsubo-products/
52 Fujitsubo
Third Generation 2009 - 2013
( SH5 2.0 Turbo AT / MT - EJ20T
SH5 2.0 NA AT - EJ20
SHJ 2.0 NA AT - FB20)
Authorized - S [ Axel-Back ]
Part No. FGK 350-64531 Price $1,300.00
* 107 x 96mm Round Oval Slashed Polished Tip
* Weight: 28.2 lbs. (OEM 30.4 lbs.)
* Sound Level: 91dB @ 4200rpm (OEM 88dB)

Third Generation 2009 - 2013 (SH5 2.0 AT/MT - EJ20T)

Authorized - R [ Cat-Back ]
Part No. FGK 560-64531 Price $1,710.00
* 117mm Round Slashed Polished Tip
* Weight: 39.9 lbs. (OEM 48.1 lbs.)
* Sound Level: 85dB @ 4200rpm (OEM 81dB)

52 cuscousainc.com/products/fujitsubo-products/
53 Fujitsubo
Fourth Generation 2014 - 2018 (SJ5 2.0 NA - FB20)
Authorized - S [ Axel-Back ]
Part No. FGK 350-64541 Price $680.00
* 117mm Round Slashed Polished Tip
* Weight: 13.2 lbs. (OEM 13.4 lbs.)
* Sound Level: 90dB @ 4650rpm (OEM 79dB)

Fourth Generation 2014 - 2018 (SJG 2.0 Turbo - FA20T)

Authorized - S [ Axel-Back ]
Part No. FGK 350-64542 Price $1,200.00
* 117mm Round Slashed Polished Tip
* Weight: 26.9 lbs. (OEM 30.4 lbs.)
* Sound Level: 81dB @ 4275rpm (OEM 77dB)

53 cuscousainc.com/products/fujitsubo-products/
 CUSCO USA
16635 Gemini Lane, Huntington beach, CA 92647
Phone : (+1) 714-907-0033
Fax : (+1) 714-369-8142

www. cuscousainc .com