The Eclipse Explorer's Guide in Collaboration With NASA Lesson 3 - Eclipse Facts and Highlights Part 1 Presentation
The Eclipse Explorer's Guide in Collaboration With NASA Lesson 3 - Eclipse Facts and Highlights Part 1 Presentation
SENSING
BARAKATH NISHA S
2022504508
INTRODUCTION
Radiation and the Atmosphere (B)– as the energy travels from its source
to the target, it will come in contact with and interact with the atmosphere it
passes through.This interaction may take place a second time as the
energy travels from the target to the sensor.
Interaction with the Target (C)- once the energy makes its way to the
target through the atmosphere, it interacts with the target depending on
the properties of both the target and the radiation.
Recording of Energy by the Sensor (D) - after the energy has been scattered by, or
emitted from the target, wer equire a sensor (remote-not in contact with the
target) to collect and record the electromagnetic radiation.
1. Active Sensor
2. Passive Sensor
ACTIVE SENSOR
In this type, remote sensing systems generate energy and use that energy to
measure the energy reflected or scattered from objects.
Radar
liDAR
PASSIVE SENSOR
In this type, remote sensing systems measure the energy emitted from the sun or
other natural sources.
Optical Imaging
Thermal Imaging
USE OF REMOTE
SENSING
Agriculture: Health status of crops, irrigation requirement, detection of pests
and diseases
Missile Defense Systems: Remote sensing is also used in tracking and intercepting
ballistic missiles. Systems like the SM-3 (Standard Missile-3) interceptors use
sensors to detect, track, and intercept incoming projectiles.
Earth Observation Missions: Satellites equipped with active optical remote sensing
like CALIPSO and ICESat-2 continue to monitor climate-related data.
THANK YOU
See you next time!